1# 2# Block device driver configuration 3# 4 5menuconfig BLK_DEV 6 bool "Block devices" 7 depends on BLOCK 8 default y 9 ---help--- 10 Say Y here to get to see options for various different block device 11 drivers. This option alone does not add any kernel code. 12 13 If you say N, all options in this submenu will be skipped and disabled; 14 only do this if you know what you are doing. 15 16if BLK_DEV 17 18config BLK_DEV_NULL_BLK 19 tristate "Null test block driver" 20 21config BLK_DEV_FD 22 tristate "Normal floppy disk support" 23 depends on ARCH_MAY_HAVE_PC_FDC 24 ---help--- 25 If you want to use the floppy disk drive(s) of your PC under Linux, 26 say Y. Information about this driver, especially important for IBM 27 Thinkpad users, is contained in 28 <file:Documentation/blockdev/floppy.txt>. 29 That file also contains the location of the Floppy driver FAQ as 30 well as location of the fdutils package used to configure additional 31 parameters of the driver at run time. 32 33 To compile this driver as a module, choose M here: the 34 module will be called floppy. 35 36config AMIGA_FLOPPY 37 tristate "Amiga floppy support" 38 depends on AMIGA 39 40config ATARI_FLOPPY 41 tristate "Atari floppy support" 42 depends on ATARI 43 44config MAC_FLOPPY 45 tristate "Support for PowerMac floppy" 46 depends on PPC_PMAC && !PPC_PMAC64 47 help 48 If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple) 49 floppy controller, say Y here. Most commonly found in PowerMacs. 50 51config BLK_DEV_SWIM 52 tristate "Support for SWIM Macintosh floppy" 53 depends on M68K && MAC 54 help 55 You should select this option if you want floppy support 56 and you don't have a II, IIfx, Q900, Q950 or AV series. 57 58config AMIGA_Z2RAM 59 tristate "Amiga Zorro II ramdisk support" 60 depends on ZORRO 61 help 62 This enables support for using Chip RAM and Zorro II RAM as a 63 ramdisk or as a swap partition. Say Y if you want to include this 64 driver in the kernel. 65 66 To compile this driver as a module, choose M here: the 67 module will be called z2ram. 68 69config GDROM 70 tristate "SEGA Dreamcast GD-ROM drive" 71 depends on SH_DREAMCAST 72 select BLK_SCSI_REQUEST # only for the generic cdrom code 73 help 74 A standard SEGA Dreamcast comes with a modified CD ROM drive called a 75 "GD-ROM" by SEGA to signify it is capable of reading special disks 76 with up to 1 GB of data. This drive will also read standard CD ROM 77 disks. Select this option to access any disks in your GD ROM drive. 78 Most users will want to say "Y" here. 79 You can also build this as a module which will be called gdrom. 80 81config PARIDE 82 tristate "Parallel port IDE device support" 83 depends on PARPORT_PC 84 ---help--- 85 There are many external CD-ROM and disk devices that connect through 86 your computer's parallel port. Most of them are actually IDE devices 87 using a parallel port IDE adapter. This option enables the PARIDE 88 subsystem which contains drivers for many of these external drives. 89 Read <file:Documentation/blockdev/paride.txt> for more information. 90 91 If you have said Y to the "Parallel-port support" configuration 92 option, you may share a single port between your printer and other 93 parallel port devices. Answer Y to build PARIDE support into your 94 kernel, or M if you would like to build it as a loadable module. If 95 your parallel port support is in a loadable module, you must build 96 PARIDE as a module. If you built PARIDE support into your kernel, 97 you may still build the individual protocol modules and high-level 98 drivers as loadable modules. If you build this support as a module, 99 it will be called paride. 100 101 To use the PARIDE support, you must say Y or M here and also to at 102 least one high-level driver (e.g. "Parallel port IDE disks", 103 "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and 104 to at least one protocol driver (e.g. "ATEN EH-100 protocol", 105 "MicroSolutions backpack protocol", "DataStor Commuter protocol" 106 etc.). 107 108source "drivers/block/paride/Kconfig" 109 110source "drivers/block/mtip32xx/Kconfig" 111 112source "drivers/block/zram/Kconfig" 113 114config BLK_CPQ_CISS_DA 115 tristate "Compaq Smart Array 5xxx support" 116 depends on PCI 117 select CHECK_SIGNATURE 118 select BLK_SCSI_REQUEST 119 help 120 This is the driver for Compaq Smart Array 5xxx controllers. 121 Everyone using these boards should say Y here. 122 See <file:Documentation/blockdev/cciss.txt> for the current list of 123 boards supported by this driver, and for further information 124 on the use of this driver. 125 126config CISS_SCSI_TAPE 127 bool "SCSI tape drive support for Smart Array 5xxx" 128 depends on BLK_CPQ_CISS_DA && PROC_FS 129 depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA 130 help 131 When enabled (Y), this option allows SCSI tape drives and SCSI medium 132 changers (tape robots) to be accessed via a Compaq 5xxx array 133 controller. (See <file:Documentation/blockdev/cciss.txt> for more details.) 134 135 "SCSI support" and "SCSI tape support" must also be enabled for this 136 option to work. 137 138 When this option is disabled (N), the SCSI portion of the driver 139 is not compiled. 140 141config BLK_DEV_DAC960 142 tristate "Mylex DAC960/DAC1100 PCI RAID Controller support" 143 depends on PCI 144 help 145 This driver adds support for the Mylex DAC960, AcceleRAID, and 146 eXtremeRAID PCI RAID controllers. See the file 147 <file:Documentation/blockdev/README.DAC960> for further information 148 about this driver. 149 150 To compile this driver as a module, choose M here: the 151 module will be called DAC960. 152 153config BLK_DEV_UMEM 154 tristate "Micro Memory MM5415 Battery Backed RAM support" 155 depends on PCI 156 ---help--- 157 Saying Y here will include support for the MM5415 family of 158 battery backed (Non-volatile) RAM cards. 159 <http://www.umem.com/> 160 161 The cards appear as block devices that can be partitioned into 162 as many as 15 partitions. 163 164 To compile this driver as a module, choose M here: the 165 module will be called umem. 166 167 The umem driver has not yet been allocated a MAJOR number, so 168 one is chosen dynamically. 169 170config BLK_DEV_UBD 171 bool "Virtual block device" 172 depends on UML 173 ---help--- 174 The User-Mode Linux port includes a driver called UBD which will let 175 you access arbitrary files on the host computer as block devices. 176 Unless you know that you do not need such virtual block devices say 177 Y here. 178 179config BLK_DEV_UBD_SYNC 180 bool "Always do synchronous disk IO for UBD" 181 depends on BLK_DEV_UBD 182 ---help--- 183 Writes to the virtual block device are not immediately written to the 184 host's disk; this may cause problems if, for example, the User-Mode 185 Linux 'Virtual Machine' uses a journalling filesystem and the host 186 computer crashes. 187 188 Synchronous operation (i.e. always writing data to the host's disk 189 immediately) is configurable on a per-UBD basis by using a special 190 kernel command line option. Alternatively, you can say Y here to 191 turn on synchronous operation by default for all block devices. 192 193 If you're running a journalling file system (like reiserfs, for 194 example) in your virtual machine, you will want to say Y here. If 195 you care for the safety of the data in your virtual machine, Y is a 196 wise choice too. In all other cases (for example, if you're just 197 playing around with User-Mode Linux) you can choose N. 198 199config BLK_DEV_COW_COMMON 200 bool 201 default BLK_DEV_UBD 202 203config BLK_DEV_LOOP 204 tristate "Loopback device support" 205 ---help--- 206 Saying Y here will allow you to use a regular file as a block 207 device; you can then create a file system on that block device and 208 mount it just as you would mount other block devices such as hard 209 drive partitions, CD-ROM drives or floppy drives. The loop devices 210 are block special device files with major number 7 and typically 211 called /dev/loop0, /dev/loop1 etc. 212 213 This is useful if you want to check an ISO 9660 file system before 214 burning the CD, or if you want to use floppy images without first 215 writing them to floppy. Furthermore, some Linux distributions avoid 216 the need for a dedicated Linux partition by keeping their complete 217 root file system inside a DOS FAT file using this loop device 218 driver. 219 220 To use the loop device, you need the losetup utility, found in the 221 util-linux package, see 222 <https://www.kernel.org/pub/linux/utils/util-linux/>. 223 224 The loop device driver can also be used to "hide" a file system in 225 a disk partition, floppy, or regular file, either using encryption 226 (scrambling the data) or steganography (hiding the data in the low 227 bits of, say, a sound file). This is also safe if the file resides 228 on a remote file server. 229 230 There are several ways of encrypting disks. Some of these require 231 kernel patches. The vanilla kernel offers the cryptoloop option 232 and a Device Mapper target (which is superior, as it supports all 233 file systems). If you want to use the cryptoloop, say Y to both 234 LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12 235 or later) version of util-linux. Additionally, be aware that 236 the cryptoloop is not safe for storing journaled filesystems. 237 238 Note that this loop device has nothing to do with the loopback 239 device used for network connections from the machine to itself. 240 241 To compile this driver as a module, choose M here: the 242 module will be called loop. 243 244 Most users will answer N here. 245 246config BLK_DEV_LOOP_MIN_COUNT 247 int "Number of loop devices to pre-create at init time" 248 depends on BLK_DEV_LOOP 249 default 8 250 help 251 Static number of loop devices to be unconditionally pre-created 252 at init time. 253 254 This default value can be overwritten on the kernel command 255 line or with module-parameter loop.max_loop. 256 257 The historic default is 8. If a late 2011 version of losetup(8) 258 is used, it can be set to 0, since needed loop devices can be 259 dynamically allocated with the /dev/loop-control interface. 260 261config BLK_DEV_CRYPTOLOOP 262 tristate "Cryptoloop Support" 263 select CRYPTO 264 select CRYPTO_CBC 265 depends on BLK_DEV_LOOP 266 ---help--- 267 Say Y here if you want to be able to use the ciphers that are 268 provided by the CryptoAPI as loop transformation. This might be 269 used as hard disk encryption. 270 271 WARNING: This device is not safe for journaled file systems like 272 ext3 or Reiserfs. Please use the Device Mapper crypto module 273 instead, which can be configured to be on-disk compatible with the 274 cryptoloop device. 275 276source "drivers/block/drbd/Kconfig" 277 278config BLK_DEV_NBD 279 tristate "Network block device support" 280 depends on NET 281 ---help--- 282 Saying Y here will allow your computer to be a client for network 283 block devices, i.e. it will be able to use block devices exported by 284 servers (mount file systems on them etc.). Communication between 285 client and server works over TCP/IP networking, but to the client 286 program this is hidden: it looks like a regular local file access to 287 a block device special file such as /dev/nd0. 288 289 Network block devices also allows you to run a block-device in 290 userland (making server and client physically the same computer, 291 communicating using the loopback network device). 292 293 Read <file:Documentation/blockdev/nbd.txt> for more information, 294 especially about where to find the server code, which runs in user 295 space and does not need special kernel support. 296 297 Note that this has nothing to do with the network file systems NFS 298 or Coda; you can say N here even if you intend to use NFS or Coda. 299 300 To compile this driver as a module, choose M here: the 301 module will be called nbd. 302 303 If unsure, say N. 304 305config BLK_DEV_SKD 306 tristate "STEC S1120 Block Driver" 307 depends on PCI 308 depends on 64BIT 309 ---help--- 310 Saying Y or M here will enable support for the 311 STEC, Inc. S1120 PCIe SSD. 312 313 Use device /dev/skd$N amd /dev/skd$Np$M. 314 315config BLK_DEV_SX8 316 tristate "Promise SATA SX8 support" 317 depends on PCI 318 ---help--- 319 Saying Y or M here will enable support for the 320 Promise SATA SX8 controllers. 321 322 Use devices /dev/sx8/$N and /dev/sx8/$Np$M. 323 324config BLK_DEV_RAM 325 tristate "RAM block device support" 326 select DAX if BLK_DEV_RAM_DAX 327 ---help--- 328 Saying Y here will allow you to use a portion of your RAM memory as 329 a block device, so that you can make file systems on it, read and 330 write to it and do all the other things that you can do with normal 331 block devices (such as hard drives). It is usually used to load and 332 store a copy of a minimal root file system off of a floppy into RAM 333 during the initial install of Linux. 334 335 Note that the kernel command line option "ramdisk=XX" is now obsolete. 336 For details, read <file:Documentation/blockdev/ramdisk.txt>. 337 338 To compile this driver as a module, choose M here: the 339 module will be called brd. An alias "rd" has been defined 340 for historical reasons. 341 342 Most normal users won't need the RAM disk functionality, and can 343 thus say N here. 344 345config BLK_DEV_RAM_COUNT 346 int "Default number of RAM disks" 347 default "16" 348 depends on BLK_DEV_RAM 349 help 350 The default value is 16 RAM disks. Change this if you know what you 351 are doing. If you boot from a filesystem that needs to be extracted 352 in memory, you will need at least one RAM disk (e.g. root on cramfs). 353 354config BLK_DEV_RAM_SIZE 355 int "Default RAM disk size (kbytes)" 356 depends on BLK_DEV_RAM 357 default "4096" 358 help 359 The default value is 4096 kilobytes. Only change this if you know 360 what you are doing. 361 362config BLK_DEV_RAM_DAX 363 bool "Support Direct Access (DAX) to RAM block devices" 364 depends on BLK_DEV_RAM && FS_DAX 365 default n 366 help 367 Support filesystems using DAX to access RAM block devices. This 368 avoids double-buffering data in the page cache before copying it 369 to the block device. Answering Y will slightly enlarge the kernel, 370 and will prevent RAM block device backing store memory from being 371 allocated from highmem (only a problem for highmem systems). 372 373config CDROM_PKTCDVD 374 tristate "Packet writing on CD/DVD media (DEPRECATED)" 375 depends on !UML 376 select BLK_SCSI_REQUEST 377 help 378 Note: This driver is deprecated and will be removed from the 379 kernel in the near future! 380 381 If you have a CDROM/DVD drive that supports packet writing, say 382 Y to include support. It should work with any MMC/Mt Fuji 383 compliant ATAPI or SCSI drive, which is just about any newer 384 DVD/CD writer. 385 386 Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs 387 is possible. 388 DVD-RW disks must be in restricted overwrite mode. 389 390 See the file <file:Documentation/cdrom/packet-writing.txt> 391 for further information on the use of this driver. 392 393 To compile this driver as a module, choose M here: the 394 module will be called pktcdvd. 395 396config CDROM_PKTCDVD_BUFFERS 397 int "Free buffers for data gathering" 398 depends on CDROM_PKTCDVD 399 default "8" 400 help 401 This controls the maximum number of active concurrent packets. More 402 concurrent packets can increase write performance, but also require 403 more memory. Each concurrent packet will require approximately 64Kb 404 of non-swappable kernel memory, memory which will be allocated when 405 a disc is opened for writing. 406 407config CDROM_PKTCDVD_WCACHE 408 bool "Enable write caching" 409 depends on CDROM_PKTCDVD 410 help 411 If enabled, write caching will be set for the CD-R/W device. For now 412 this option is dangerous unless the CD-RW media is known good, as we 413 don't do deferred write error handling yet. 414 415config ATA_OVER_ETH 416 tristate "ATA over Ethernet support" 417 depends on NET 418 help 419 This driver provides Support for ATA over Ethernet block 420 devices like the Coraid EtherDrive (R) Storage Blade. 421 422config SUNVDC 423 tristate "Sun Virtual Disk Client support" 424 depends on SUN_LDOMS 425 help 426 Support for virtual disk devices as a client under Sun 427 Logical Domains. 428 429source "drivers/s390/block/Kconfig" 430 431config XILINX_SYSACE 432 tristate "Xilinx SystemACE support" 433 depends on 4xx || MICROBLAZE 434 help 435 Include support for the Xilinx SystemACE CompactFlash interface 436 437config XEN_BLKDEV_FRONTEND 438 tristate "Xen virtual block device support" 439 depends on XEN 440 default y 441 select XEN_XENBUS_FRONTEND 442 help 443 This driver implements the front-end of the Xen virtual 444 block device driver. It communicates with a back-end driver 445 in another domain which drives the actual block device. 446 447config XEN_BLKDEV_BACKEND 448 tristate "Xen block-device backend driver" 449 depends on XEN_BACKEND 450 help 451 The block-device backend driver allows the kernel to export its 452 block devices to other guests via a high-performance shared-memory 453 interface. 454 455 The corresponding Linux frontend driver is enabled by the 456 CONFIG_XEN_BLKDEV_FRONTEND configuration option. 457 458 The backend driver attaches itself to a any block device specified 459 in the XenBus configuration. There are no limits to what the block 460 device as long as it has a major and minor. 461 462 If you are compiling a kernel to run in a Xen block backend driver 463 domain (often this is domain 0) you should say Y here. To 464 compile this driver as a module, chose M here: the module 465 will be called xen-blkback. 466 467 468config VIRTIO_BLK 469 tristate "Virtio block driver" 470 depends on VIRTIO 471 ---help--- 472 This is the virtual block driver for virtio. It can be used with 473 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. 474 475config VIRTIO_BLK_SCSI 476 bool "SCSI passthrough request for the Virtio block driver" 477 depends on VIRTIO_BLK 478 select BLK_SCSI_REQUEST 479 ---help--- 480 Enable support for SCSI passthrough (e.g. the SG_IO ioctl) on 481 virtio-blk devices. This is only supported for the legacy 482 virtio protocol and not enabled by default by any hypervisor. 483 You probably want to use virtio-scsi instead. 484 485config BLK_DEV_RBD 486 tristate "Rados block device (RBD)" 487 depends on INET && BLOCK 488 select CEPH_LIB 489 select LIBCRC32C 490 select CRYPTO_AES 491 select CRYPTO 492 default n 493 help 494 Say Y here if you want include the Rados block device, which stripes 495 a block device over objects stored in the Ceph distributed object 496 store. 497 498 More information at http://ceph.newdream.net/. 499 500 If unsure, say N. 501 502config BLK_DEV_RSXX 503 tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver" 504 depends on PCI 505 help 506 Device driver for IBM's high speed PCIe SSD 507 storage device: Flash Adapter 900GB Full Height. 508 509 To compile this driver as a module, choose M here: the 510 module will be called rsxx. 511 512endif # BLK_DEV 513