1# SPDX-License-Identifier: GPL-2.0 2# 3# Block device driver configuration 4# 5 6menuconfig BLK_DEV 7 bool "Block devices" 8 depends on BLOCK 9 default y 10 help 11 Say Y here to get to see options for various different block device 12 drivers. This option alone does not add any kernel code. 13 14 If you say N, all options in this submenu will be skipped and disabled; 15 only do this if you know what you are doing. 16 17if BLK_DEV 18 19source "drivers/block/null_blk/Kconfig" 20 21config BLK_DEV_FD 22 tristate "Normal floppy disk support" 23 depends on ARCH_MAY_HAVE_PC_FDC 24 help 25 If you want to use the floppy disk drive(s) of your PC under Linux, 26 say Y. Information about this driver, especially important for IBM 27 Thinkpad users, is contained in 28 <file:Documentation/admin-guide/blockdev/floppy.rst>. 29 That file also contains the location of the Floppy driver FAQ as 30 well as location of the fdutils package used to configure additional 31 parameters of the driver at run time. 32 33 To compile this driver as a module, choose M here: the 34 module will be called floppy. 35 36config AMIGA_FLOPPY 37 tristate "Amiga floppy support" 38 depends on AMIGA 39 40config ATARI_FLOPPY 41 tristate "Atari floppy support" 42 depends on ATARI 43 44config MAC_FLOPPY 45 tristate "Support for PowerMac floppy" 46 depends on PPC_PMAC && !PPC_PMAC64 47 help 48 If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple) 49 floppy controller, say Y here. Most commonly found in PowerMacs. 50 51config BLK_DEV_SWIM 52 tristate "Support for SWIM Macintosh floppy" 53 depends on M68K && MAC 54 help 55 You should select this option if you want floppy support 56 and you don't have a II, IIfx, Q900, Q950 or AV series. 57 58config AMIGA_Z2RAM 59 tristate "Amiga Zorro II ramdisk support" 60 depends on ZORRO 61 help 62 This enables support for using Chip RAM and Zorro II RAM as a 63 ramdisk or as a swap partition. Say Y if you want to include this 64 driver in the kernel. 65 66 To compile this driver as a module, choose M here: the 67 module will be called z2ram. 68 69config CDROM 70 tristate 71 select BLK_SCSI_REQUEST 72 73config GDROM 74 tristate "SEGA Dreamcast GD-ROM drive" 75 depends on SH_DREAMCAST 76 select CDROM 77 help 78 A standard SEGA Dreamcast comes with a modified CD ROM drive called a 79 "GD-ROM" by SEGA to signify it is capable of reading special disks 80 with up to 1 GB of data. This drive will also read standard CD ROM 81 disks. Select this option to access any disks in your GD ROM drive. 82 Most users will want to say "Y" here. 83 You can also build this as a module which will be called gdrom. 84 85config PARIDE 86 tristate "Parallel port IDE device support" 87 depends on PARPORT_PC 88 help 89 There are many external CD-ROM and disk devices that connect through 90 your computer's parallel port. Most of them are actually IDE devices 91 using a parallel port IDE adapter. This option enables the PARIDE 92 subsystem which contains drivers for many of these external drives. 93 Read <file:Documentation/admin-guide/blockdev/paride.rst> for more information. 94 95 If you have said Y to the "Parallel-port support" configuration 96 option, you may share a single port between your printer and other 97 parallel port devices. Answer Y to build PARIDE support into your 98 kernel, or M if you would like to build it as a loadable module. If 99 your parallel port support is in a loadable module, you must build 100 PARIDE as a module. If you built PARIDE support into your kernel, 101 you may still build the individual protocol modules and high-level 102 drivers as loadable modules. If you build this support as a module, 103 it will be called paride. 104 105 To use the PARIDE support, you must say Y or M here and also to at 106 least one high-level driver (e.g. "Parallel port IDE disks", 107 "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and 108 to at least one protocol driver (e.g. "ATEN EH-100 protocol", 109 "MicroSolutions backpack protocol", "DataStor Commuter protocol" 110 etc.). 111 112source "drivers/block/paride/Kconfig" 113 114source "drivers/block/mtip32xx/Kconfig" 115 116source "drivers/block/zram/Kconfig" 117 118config BLK_DEV_UMEM 119 tristate "Micro Memory MM5415 Battery Backed RAM support" 120 depends on PCI 121 help 122 Saying Y here will include support for the MM5415 family of 123 battery backed (Non-volatile) RAM cards. 124 <http://www.umem.com/> 125 126 The cards appear as block devices that can be partitioned into 127 as many as 15 partitions. 128 129 To compile this driver as a module, choose M here: the 130 module will be called umem. 131 132 The umem driver has not yet been allocated a MAJOR number, so 133 one is chosen dynamically. 134 135config BLK_DEV_UBD 136 bool "Virtual block device" 137 depends on UML 138 help 139 The User-Mode Linux port includes a driver called UBD which will let 140 you access arbitrary files on the host computer as block devices. 141 Unless you know that you do not need such virtual block devices say 142 Y here. 143 144config BLK_DEV_UBD_SYNC 145 bool "Always do synchronous disk IO for UBD" 146 depends on BLK_DEV_UBD 147 help 148 Writes to the virtual block device are not immediately written to the 149 host's disk; this may cause problems if, for example, the User-Mode 150 Linux 'Virtual Machine' uses a journalling filesystem and the host 151 computer crashes. 152 153 Synchronous operation (i.e. always writing data to the host's disk 154 immediately) is configurable on a per-UBD basis by using a special 155 kernel command line option. Alternatively, you can say Y here to 156 turn on synchronous operation by default for all block devices. 157 158 If you're running a journalling file system (like reiserfs, for 159 example) in your virtual machine, you will want to say Y here. If 160 you care for the safety of the data in your virtual machine, Y is a 161 wise choice too. In all other cases (for example, if you're just 162 playing around with User-Mode Linux) you can choose N. 163 164config BLK_DEV_COW_COMMON 165 bool 166 default BLK_DEV_UBD 167 168config BLK_DEV_LOOP 169 tristate "Loopback device support" 170 help 171 Saying Y here will allow you to use a regular file as a block 172 device; you can then create a file system on that block device and 173 mount it just as you would mount other block devices such as hard 174 drive partitions, CD-ROM drives or floppy drives. The loop devices 175 are block special device files with major number 7 and typically 176 called /dev/loop0, /dev/loop1 etc. 177 178 This is useful if you want to check an ISO 9660 file system before 179 burning the CD, or if you want to use floppy images without first 180 writing them to floppy. Furthermore, some Linux distributions avoid 181 the need for a dedicated Linux partition by keeping their complete 182 root file system inside a DOS FAT file using this loop device 183 driver. 184 185 To use the loop device, you need the losetup utility, found in the 186 util-linux package, see 187 <https://www.kernel.org/pub/linux/utils/util-linux/>. 188 189 The loop device driver can also be used to "hide" a file system in 190 a disk partition, floppy, or regular file, either using encryption 191 (scrambling the data) or steganography (hiding the data in the low 192 bits of, say, a sound file). This is also safe if the file resides 193 on a remote file server. 194 195 There are several ways of encrypting disks. Some of these require 196 kernel patches. The vanilla kernel offers the cryptoloop option 197 and a Device Mapper target (which is superior, as it supports all 198 file systems). If you want to use the cryptoloop, say Y to both 199 LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12 200 or later) version of util-linux. Additionally, be aware that 201 the cryptoloop is not safe for storing journaled filesystems. 202 203 Note that this loop device has nothing to do with the loopback 204 device used for network connections from the machine to itself. 205 206 To compile this driver as a module, choose M here: the 207 module will be called loop. 208 209 Most users will answer N here. 210 211config BLK_DEV_LOOP_MIN_COUNT 212 int "Number of loop devices to pre-create at init time" 213 depends on BLK_DEV_LOOP 214 default 8 215 help 216 Static number of loop devices to be unconditionally pre-created 217 at init time. 218 219 This default value can be overwritten on the kernel command 220 line or with module-parameter loop.max_loop. 221 222 The historic default is 8. If a late 2011 version of losetup(8) 223 is used, it can be set to 0, since needed loop devices can be 224 dynamically allocated with the /dev/loop-control interface. 225 226config BLK_DEV_CRYPTOLOOP 227 tristate "Cryptoloop Support" 228 select CRYPTO 229 select CRYPTO_CBC 230 depends on BLK_DEV_LOOP 231 help 232 Say Y here if you want to be able to use the ciphers that are 233 provided by the CryptoAPI as loop transformation. This might be 234 used as hard disk encryption. 235 236 WARNING: This device is not safe for journaled file systems like 237 ext3 or Reiserfs. Please use the Device Mapper crypto module 238 instead, which can be configured to be on-disk compatible with the 239 cryptoloop device. 240 241source "drivers/block/drbd/Kconfig" 242 243config BLK_DEV_NBD 244 tristate "Network block device support" 245 depends on NET 246 help 247 Saying Y here will allow your computer to be a client for network 248 block devices, i.e. it will be able to use block devices exported by 249 servers (mount file systems on them etc.). Communication between 250 client and server works over TCP/IP networking, but to the client 251 program this is hidden: it looks like a regular local file access to 252 a block device special file such as /dev/nd0. 253 254 Network block devices also allows you to run a block-device in 255 userland (making server and client physically the same computer, 256 communicating using the loopback network device). 257 258 Read <file:Documentation/admin-guide/blockdev/nbd.rst> for more information, 259 especially about where to find the server code, which runs in user 260 space and does not need special kernel support. 261 262 Note that this has nothing to do with the network file systems NFS 263 or Coda; you can say N here even if you intend to use NFS or Coda. 264 265 To compile this driver as a module, choose M here: the 266 module will be called nbd. 267 268 If unsure, say N. 269 270config BLK_DEV_SKD 271 tristate "STEC S1120 Block Driver" 272 depends on PCI 273 depends on 64BIT 274 help 275 Saying Y or M here will enable support for the 276 STEC, Inc. S1120 PCIe SSD. 277 278 Use device /dev/skd$N amd /dev/skd$Np$M. 279 280config BLK_DEV_SX8 281 tristate "Promise SATA SX8 support" 282 depends on PCI 283 help 284 Saying Y or M here will enable support for the 285 Promise SATA SX8 controllers. 286 287 Use devices /dev/sx8/$N and /dev/sx8/$Np$M. 288 289config BLK_DEV_RAM 290 tristate "RAM block device support" 291 help 292 Saying Y here will allow you to use a portion of your RAM memory as 293 a block device, so that you can make file systems on it, read and 294 write to it and do all the other things that you can do with normal 295 block devices (such as hard drives). It is usually used to load and 296 store a copy of a minimal root file system off of a floppy into RAM 297 during the initial install of Linux. 298 299 Note that the kernel command line option "ramdisk=XX" is now obsolete. 300 For details, read <file:Documentation/admin-guide/blockdev/ramdisk.rst>. 301 302 To compile this driver as a module, choose M here: the 303 module will be called brd. An alias "rd" has been defined 304 for historical reasons. 305 306 Most normal users won't need the RAM disk functionality, and can 307 thus say N here. 308 309config BLK_DEV_RAM_COUNT 310 int "Default number of RAM disks" 311 default "16" 312 depends on BLK_DEV_RAM 313 help 314 The default value is 16 RAM disks. Change this if you know what you 315 are doing. If you boot from a filesystem that needs to be extracted 316 in memory, you will need at least one RAM disk (e.g. root on cramfs). 317 318config BLK_DEV_RAM_SIZE 319 int "Default RAM disk size (kbytes)" 320 depends on BLK_DEV_RAM 321 default "4096" 322 help 323 The default value is 4096 kilobytes. Only change this if you know 324 what you are doing. 325 326config CDROM_PKTCDVD 327 tristate "Packet writing on CD/DVD media (DEPRECATED)" 328 depends on !UML 329 select CDROM 330 select BLK_SCSI_REQUEST 331 help 332 Note: This driver is deprecated and will be removed from the 333 kernel in the near future! 334 335 If you have a CDROM/DVD drive that supports packet writing, say 336 Y to include support. It should work with any MMC/Mt Fuji 337 compliant ATAPI or SCSI drive, which is just about any newer 338 DVD/CD writer. 339 340 Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs 341 is possible. 342 DVD-RW disks must be in restricted overwrite mode. 343 344 See the file <file:Documentation/cdrom/packet-writing.rst> 345 for further information on the use of this driver. 346 347 To compile this driver as a module, choose M here: the 348 module will be called pktcdvd. 349 350config CDROM_PKTCDVD_BUFFERS 351 int "Free buffers for data gathering" 352 depends on CDROM_PKTCDVD 353 default "8" 354 help 355 This controls the maximum number of active concurrent packets. More 356 concurrent packets can increase write performance, but also require 357 more memory. Each concurrent packet will require approximately 64Kb 358 of non-swappable kernel memory, memory which will be allocated when 359 a disc is opened for writing. 360 361config CDROM_PKTCDVD_WCACHE 362 bool "Enable write caching" 363 depends on CDROM_PKTCDVD 364 help 365 If enabled, write caching will be set for the CD-R/W device. For now 366 this option is dangerous unless the CD-RW media is known good, as we 367 don't do deferred write error handling yet. 368 369config ATA_OVER_ETH 370 tristate "ATA over Ethernet support" 371 depends on NET 372 help 373 This driver provides Support for ATA over Ethernet block 374 devices like the Coraid EtherDrive (R) Storage Blade. 375 376config SUNVDC 377 tristate "Sun Virtual Disk Client support" 378 depends on SUN_LDOMS 379 help 380 Support for virtual disk devices as a client under Sun 381 Logical Domains. 382 383source "drivers/s390/block/Kconfig" 384 385config XILINX_SYSACE 386 tristate "Xilinx SystemACE support" 387 depends on 4xx || MICROBLAZE 388 help 389 Include support for the Xilinx SystemACE CompactFlash interface 390 391config XEN_BLKDEV_FRONTEND 392 tristate "Xen virtual block device support" 393 depends on XEN 394 default y 395 select XEN_XENBUS_FRONTEND 396 help 397 This driver implements the front-end of the Xen virtual 398 block device driver. It communicates with a back-end driver 399 in another domain which drives the actual block device. 400 401config XEN_BLKDEV_BACKEND 402 tristate "Xen block-device backend driver" 403 depends on XEN_BACKEND 404 help 405 The block-device backend driver allows the kernel to export its 406 block devices to other guests via a high-performance shared-memory 407 interface. 408 409 The corresponding Linux frontend driver is enabled by the 410 CONFIG_XEN_BLKDEV_FRONTEND configuration option. 411 412 The backend driver attaches itself to a any block device specified 413 in the XenBus configuration. There are no limits to what the block 414 device as long as it has a major and minor. 415 416 If you are compiling a kernel to run in a Xen block backend driver 417 domain (often this is domain 0) you should say Y here. To 418 compile this driver as a module, chose M here: the module 419 will be called xen-blkback. 420 421 422config VIRTIO_BLK 423 tristate "Virtio block driver" 424 depends on VIRTIO 425 help 426 This is the virtual block driver for virtio. It can be used with 427 QEMU based VMMs (like KVM or Xen). Say Y or M. 428 429config BLK_DEV_RBD 430 tristate "Rados block device (RBD)" 431 depends on INET && BLOCK 432 select CEPH_LIB 433 select LIBCRC32C 434 select CRYPTO_AES 435 select CRYPTO 436 help 437 Say Y here if you want include the Rados block device, which stripes 438 a block device over objects stored in the Ceph distributed object 439 store. 440 441 More information at http://ceph.newdream.net/. 442 443 If unsure, say N. 444 445config BLK_DEV_RSXX 446 tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver" 447 depends on PCI 448 select CRC32 449 help 450 Device driver for IBM's high speed PCIe SSD 451 storage device: Flash Adapter 900GB Full Height. 452 453 To compile this driver as a module, choose M here: the 454 module will be called rsxx. 455 456source "drivers/block/rnbd/Kconfig" 457 458endif # BLK_DEV 459