1# 2# Block device driver configuration 3# 4 5menuconfig BLK_DEV 6 bool "Block devices" 7 depends on BLOCK 8 default y 9 ---help--- 10 Say Y here to get to see options for various different block device 11 drivers. This option alone does not add any kernel code. 12 13 If you say N, all options in this submenu will be skipped and disabled; 14 only do this if you know what you are doing. 15 16if BLK_DEV 17 18config BLK_DEV_NULL_BLK 19 tristate "Null test block driver" 20 21config BLK_DEV_FD 22 tristate "Normal floppy disk support" 23 depends on ARCH_MAY_HAVE_PC_FDC 24 ---help--- 25 If you want to use the floppy disk drive(s) of your PC under Linux, 26 say Y. Information about this driver, especially important for IBM 27 Thinkpad users, is contained in 28 <file:Documentation/blockdev/floppy.txt>. 29 That file also contains the location of the Floppy driver FAQ as 30 well as location of the fdutils package used to configure additional 31 parameters of the driver at run time. 32 33 To compile this driver as a module, choose M here: the 34 module will be called floppy. 35 36config AMIGA_FLOPPY 37 tristate "Amiga floppy support" 38 depends on AMIGA 39 40config ATARI_FLOPPY 41 tristate "Atari floppy support" 42 depends on ATARI 43 44config MAC_FLOPPY 45 tristate "Support for PowerMac floppy" 46 depends on PPC_PMAC && !PPC_PMAC64 47 help 48 If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple) 49 floppy controller, say Y here. Most commonly found in PowerMacs. 50 51config BLK_DEV_SWIM 52 tristate "Support for SWIM Macintosh floppy" 53 depends on M68K && MAC 54 help 55 You should select this option if you want floppy support 56 and you don't have a II, IIfx, Q900, Q950 or AV series. 57 58config AMIGA_Z2RAM 59 tristate "Amiga Zorro II ramdisk support" 60 depends on ZORRO 61 help 62 This enables support for using Chip RAM and Zorro II RAM as a 63 ramdisk or as a swap partition. Say Y if you want to include this 64 driver in the kernel. 65 66 To compile this driver as a module, choose M here: the 67 module will be called z2ram. 68 69config GDROM 70 tristate "SEGA Dreamcast GD-ROM drive" 71 depends on SH_DREAMCAST 72 help 73 A standard SEGA Dreamcast comes with a modified CD ROM drive called a 74 "GD-ROM" by SEGA to signify it is capable of reading special disks 75 with up to 1 GB of data. This drive will also read standard CD ROM 76 disks. Select this option to access any disks in your GD ROM drive. 77 Most users will want to say "Y" here. 78 You can also build this as a module which will be called gdrom. 79 80config PARIDE 81 tristate "Parallel port IDE device support" 82 depends on PARPORT_PC 83 ---help--- 84 There are many external CD-ROM and disk devices that connect through 85 your computer's parallel port. Most of them are actually IDE devices 86 using a parallel port IDE adapter. This option enables the PARIDE 87 subsystem which contains drivers for many of these external drives. 88 Read <file:Documentation/blockdev/paride.txt> for more information. 89 90 If you have said Y to the "Parallel-port support" configuration 91 option, you may share a single port between your printer and other 92 parallel port devices. Answer Y to build PARIDE support into your 93 kernel, or M if you would like to build it as a loadable module. If 94 your parallel port support is in a loadable module, you must build 95 PARIDE as a module. If you built PARIDE support into your kernel, 96 you may still build the individual protocol modules and high-level 97 drivers as loadable modules. If you build this support as a module, 98 it will be called paride. 99 100 To use the PARIDE support, you must say Y or M here and also to at 101 least one high-level driver (e.g. "Parallel port IDE disks", 102 "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and 103 to at least one protocol driver (e.g. "ATEN EH-100 protocol", 104 "MicroSolutions backpack protocol", "DataStor Commuter protocol" 105 etc.). 106 107source "drivers/block/paride/Kconfig" 108 109source "drivers/block/mtip32xx/Kconfig" 110 111config BLK_CPQ_DA 112 tristate "Compaq SMART2 support" 113 depends on PCI && VIRT_TO_BUS && 0 114 help 115 This is the driver for Compaq Smart Array controllers. Everyone 116 using these boards should say Y here. See the file 117 <file:Documentation/blockdev/cpqarray.txt> for the current list of 118 boards supported by this driver, and for further information on the 119 use of this driver. 120 121config BLK_CPQ_CISS_DA 122 tristate "Compaq Smart Array 5xxx support" 123 depends on PCI 124 select CHECK_SIGNATURE 125 help 126 This is the driver for Compaq Smart Array 5xxx controllers. 127 Everyone using these boards should say Y here. 128 See <file:Documentation/blockdev/cciss.txt> for the current list of 129 boards supported by this driver, and for further information 130 on the use of this driver. 131 132config CISS_SCSI_TAPE 133 bool "SCSI tape drive support for Smart Array 5xxx" 134 depends on BLK_CPQ_CISS_DA && PROC_FS 135 depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA 136 help 137 When enabled (Y), this option allows SCSI tape drives and SCSI medium 138 changers (tape robots) to be accessed via a Compaq 5xxx array 139 controller. (See <file:Documentation/blockdev/cciss.txt> for more details.) 140 141 "SCSI support" and "SCSI tape support" must also be enabled for this 142 option to work. 143 144 When this option is disabled (N), the SCSI portion of the driver 145 is not compiled. 146 147config BLK_DEV_DAC960 148 tristate "Mylex DAC960/DAC1100 PCI RAID Controller support" 149 depends on PCI 150 help 151 This driver adds support for the Mylex DAC960, AcceleRAID, and 152 eXtremeRAID PCI RAID controllers. See the file 153 <file:Documentation/blockdev/README.DAC960> for further information 154 about this driver. 155 156 To compile this driver as a module, choose M here: the 157 module will be called DAC960. 158 159config BLK_DEV_UMEM 160 tristate "Micro Memory MM5415 Battery Backed RAM support" 161 depends on PCI 162 ---help--- 163 Saying Y here will include support for the MM5415 family of 164 battery backed (Non-volatile) RAM cards. 165 <http://www.umem.com/> 166 167 The cards appear as block devices that can be partitioned into 168 as many as 15 partitions. 169 170 To compile this driver as a module, choose M here: the 171 module will be called umem. 172 173 The umem driver has not yet been allocated a MAJOR number, so 174 one is chosen dynamically. 175 176config BLK_DEV_UBD 177 bool "Virtual block device" 178 depends on UML 179 ---help--- 180 The User-Mode Linux port includes a driver called UBD which will let 181 you access arbitrary files on the host computer as block devices. 182 Unless you know that you do not need such virtual block devices say 183 Y here. 184 185config BLK_DEV_UBD_SYNC 186 bool "Always do synchronous disk IO for UBD" 187 depends on BLK_DEV_UBD 188 ---help--- 189 Writes to the virtual block device are not immediately written to the 190 host's disk; this may cause problems if, for example, the User-Mode 191 Linux 'Virtual Machine' uses a journalling filesystem and the host 192 computer crashes. 193 194 Synchronous operation (i.e. always writing data to the host's disk 195 immediately) is configurable on a per-UBD basis by using a special 196 kernel command line option. Alternatively, you can say Y here to 197 turn on synchronous operation by default for all block devices. 198 199 If you're running a journalling file system (like reiserfs, for 200 example) in your virtual machine, you will want to say Y here. If 201 you care for the safety of the data in your virtual machine, Y is a 202 wise choice too. In all other cases (for example, if you're just 203 playing around with User-Mode Linux) you can choose N. 204 205config BLK_DEV_COW_COMMON 206 bool 207 default BLK_DEV_UBD 208 209config BLK_DEV_LOOP 210 tristate "Loopback device support" 211 ---help--- 212 Saying Y here will allow you to use a regular file as a block 213 device; you can then create a file system on that block device and 214 mount it just as you would mount other block devices such as hard 215 drive partitions, CD-ROM drives or floppy drives. The loop devices 216 are block special device files with major number 7 and typically 217 called /dev/loop0, /dev/loop1 etc. 218 219 This is useful if you want to check an ISO 9660 file system before 220 burning the CD, or if you want to use floppy images without first 221 writing them to floppy. Furthermore, some Linux distributions avoid 222 the need for a dedicated Linux partition by keeping their complete 223 root file system inside a DOS FAT file using this loop device 224 driver. 225 226 To use the loop device, you need the losetup utility, found in the 227 util-linux package, see 228 <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>. 229 230 The loop device driver can also be used to "hide" a file system in 231 a disk partition, floppy, or regular file, either using encryption 232 (scrambling the data) or steganography (hiding the data in the low 233 bits of, say, a sound file). This is also safe if the file resides 234 on a remote file server. 235 236 There are several ways of encrypting disks. Some of these require 237 kernel patches. The vanilla kernel offers the cryptoloop option 238 and a Device Mapper target (which is superior, as it supports all 239 file systems). If you want to use the cryptoloop, say Y to both 240 LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12 241 or later) version of util-linux. Additionally, be aware that 242 the cryptoloop is not safe for storing journaled filesystems. 243 244 Note that this loop device has nothing to do with the loopback 245 device used for network connections from the machine to itself. 246 247 To compile this driver as a module, choose M here: the 248 module will be called loop. 249 250 Most users will answer N here. 251 252config BLK_DEV_LOOP_MIN_COUNT 253 int "Number of loop devices to pre-create at init time" 254 depends on BLK_DEV_LOOP 255 default 8 256 help 257 Static number of loop devices to be unconditionally pre-created 258 at init time. 259 260 This default value can be overwritten on the kernel command 261 line or with module-parameter loop.max_loop. 262 263 The historic default is 8. If a late 2011 version of losetup(8) 264 is used, it can be set to 0, since needed loop devices can be 265 dynamically allocated with the /dev/loop-control interface. 266 267config BLK_DEV_CRYPTOLOOP 268 tristate "Cryptoloop Support" 269 select CRYPTO 270 select CRYPTO_CBC 271 depends on BLK_DEV_LOOP 272 ---help--- 273 Say Y here if you want to be able to use the ciphers that are 274 provided by the CryptoAPI as loop transformation. This might be 275 used as hard disk encryption. 276 277 WARNING: This device is not safe for journaled file systems like 278 ext3 or Reiserfs. Please use the Device Mapper crypto module 279 instead, which can be configured to be on-disk compatible with the 280 cryptoloop device. 281 282source "drivers/block/drbd/Kconfig" 283 284config BLK_DEV_NBD 285 tristate "Network block device support" 286 depends on NET 287 ---help--- 288 Saying Y here will allow your computer to be a client for network 289 block devices, i.e. it will be able to use block devices exported by 290 servers (mount file systems on them etc.). Communication between 291 client and server works over TCP/IP networking, but to the client 292 program this is hidden: it looks like a regular local file access to 293 a block device special file such as /dev/nd0. 294 295 Network block devices also allows you to run a block-device in 296 userland (making server and client physically the same computer, 297 communicating using the loopback network device). 298 299 Read <file:Documentation/blockdev/nbd.txt> for more information, 300 especially about where to find the server code, which runs in user 301 space and does not need special kernel support. 302 303 Note that this has nothing to do with the network file systems NFS 304 or Coda; you can say N here even if you intend to use NFS or Coda. 305 306 To compile this driver as a module, choose M here: the 307 module will be called nbd. 308 309 If unsure, say N. 310 311config BLK_DEV_NVME 312 tristate "NVM Express block device" 313 depends on PCI 314 ---help--- 315 The NVM Express driver is for solid state drives directly 316 connected to the PCI or PCI Express bus. If you know you 317 don't have one of these, it is safe to answer N. 318 319 To compile this driver as a module, choose M here: the 320 module will be called nvme. 321 322config BLK_DEV_SKD 323 tristate "STEC S1120 Block Driver" 324 depends on PCI 325 depends on 64BIT 326 ---help--- 327 Saying Y or M here will enable support for the 328 STEC, Inc. S1120 PCIe SSD. 329 330 Use device /dev/skd$N amd /dev/skd$Np$M. 331 332config BLK_DEV_OSD 333 tristate "OSD object-as-blkdev support" 334 depends on SCSI_OSD_ULD 335 ---help--- 336 Saying Y or M here will allow the exporting of a single SCSI 337 OSD (object-based storage) object as a Linux block device. 338 339 For example, if you create a 2G object on an OSD device, 340 you can then use this module to present that 2G object as 341 a Linux block device. 342 343 To compile this driver as a module, choose M here: the 344 module will be called osdblk. 345 346 If unsure, say N. 347 348config BLK_DEV_SX8 349 tristate "Promise SATA SX8 support" 350 depends on PCI 351 ---help--- 352 Saying Y or M here will enable support for the 353 Promise SATA SX8 controllers. 354 355 Use devices /dev/sx8/$N and /dev/sx8/$Np$M. 356 357config BLK_DEV_RAM 358 tristate "RAM block device support" 359 ---help--- 360 Saying Y here will allow you to use a portion of your RAM memory as 361 a block device, so that you can make file systems on it, read and 362 write to it and do all the other things that you can do with normal 363 block devices (such as hard drives). It is usually used to load and 364 store a copy of a minimal root file system off of a floppy into RAM 365 during the initial install of Linux. 366 367 Note that the kernel command line option "ramdisk=XX" is now obsolete. 368 For details, read <file:Documentation/blockdev/ramdisk.txt>. 369 370 To compile this driver as a module, choose M here: the 371 module will be called rd. 372 373 Most normal users won't need the RAM disk functionality, and can 374 thus say N here. 375 376config BLK_DEV_RAM_COUNT 377 int "Default number of RAM disks" 378 default "16" 379 depends on BLK_DEV_RAM 380 help 381 The default value is 16 RAM disks. Change this if you know what you 382 are doing. If you boot from a filesystem that needs to be extracted 383 in memory, you will need at least one RAM disk (e.g. root on cramfs). 384 385config BLK_DEV_RAM_SIZE 386 int "Default RAM disk size (kbytes)" 387 depends on BLK_DEV_RAM 388 default "4096" 389 help 390 The default value is 4096 kilobytes. Only change this if you know 391 what you are doing. 392 393config BLK_DEV_XIP 394 bool "Support XIP filesystems on RAM block device" 395 depends on BLK_DEV_RAM 396 default n 397 help 398 Support XIP filesystems (such as ext2 with XIP support on) on 399 top of block ram device. This will slightly enlarge the kernel, and 400 will prevent RAM block device backing store memory from being 401 allocated from highmem (only a problem for highmem systems). 402 403config CDROM_PKTCDVD 404 tristate "Packet writing on CD/DVD media" 405 depends on !UML 406 help 407 If you have a CDROM/DVD drive that supports packet writing, say 408 Y to include support. It should work with any MMC/Mt Fuji 409 compliant ATAPI or SCSI drive, which is just about any newer 410 DVD/CD writer. 411 412 Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs 413 is possible. 414 DVD-RW disks must be in restricted overwrite mode. 415 416 See the file <file:Documentation/cdrom/packet-writing.txt> 417 for further information on the use of this driver. 418 419 To compile this driver as a module, choose M here: the 420 module will be called pktcdvd. 421 422config CDROM_PKTCDVD_BUFFERS 423 int "Free buffers for data gathering" 424 depends on CDROM_PKTCDVD 425 default "8" 426 help 427 This controls the maximum number of active concurrent packets. More 428 concurrent packets can increase write performance, but also require 429 more memory. Each concurrent packet will require approximately 64Kb 430 of non-swappable kernel memory, memory which will be allocated when 431 a disc is opened for writing. 432 433config CDROM_PKTCDVD_WCACHE 434 bool "Enable write caching" 435 depends on CDROM_PKTCDVD 436 help 437 If enabled, write caching will be set for the CD-R/W device. For now 438 this option is dangerous unless the CD-RW media is known good, as we 439 don't do deferred write error handling yet. 440 441config ATA_OVER_ETH 442 tristate "ATA over Ethernet support" 443 depends on NET 444 help 445 This driver provides Support for ATA over Ethernet block 446 devices like the Coraid EtherDrive (R) Storage Blade. 447 448config MG_DISK 449 tristate "mGine mflash, gflash support" 450 depends on ARM && GPIOLIB 451 help 452 mGine mFlash(gFlash) block device driver 453 454config MG_DISK_RES 455 int "Size of reserved area before MBR" 456 depends on MG_DISK 457 default 0 458 help 459 Define size of reserved area that usually used for boot. Unit is KB. 460 All of the block device operation will be taken this value as start 461 offset 462 Examples: 463 1024 => 1 MB 464 465config SUNVDC 466 tristate "Sun Virtual Disk Client support" 467 depends on SUN_LDOMS 468 help 469 Support for virtual disk devices as a client under Sun 470 Logical Domains. 471 472source "drivers/s390/block/Kconfig" 473 474config XILINX_SYSACE 475 tristate "Xilinx SystemACE support" 476 depends on 4xx || MICROBLAZE 477 help 478 Include support for the Xilinx SystemACE CompactFlash interface 479 480config XEN_BLKDEV_FRONTEND 481 tristate "Xen virtual block device support" 482 depends on XEN 483 default y 484 select XEN_XENBUS_FRONTEND 485 help 486 This driver implements the front-end of the Xen virtual 487 block device driver. It communicates with a back-end driver 488 in another domain which drives the actual block device. 489 490config XEN_BLKDEV_BACKEND 491 tristate "Xen block-device backend driver" 492 depends on XEN_BACKEND 493 help 494 The block-device backend driver allows the kernel to export its 495 block devices to other guests via a high-performance shared-memory 496 interface. 497 498 The corresponding Linux frontend driver is enabled by the 499 CONFIG_XEN_BLKDEV_FRONTEND configuration option. 500 501 The backend driver attaches itself to a any block device specified 502 in the XenBus configuration. There are no limits to what the block 503 device as long as it has a major and minor. 504 505 If you are compiling a kernel to run in a Xen block backend driver 506 domain (often this is domain 0) you should say Y here. To 507 compile this driver as a module, chose M here: the module 508 will be called xen-blkback. 509 510 511config VIRTIO_BLK 512 tristate "Virtio block driver" 513 depends on VIRTIO 514 ---help--- 515 This is the virtual block driver for virtio. It can be used with 516 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. 517 518config BLK_DEV_HD 519 bool "Very old hard disk (MFM/RLL/IDE) driver" 520 depends on HAVE_IDE 521 depends on !ARM || ARCH_RPC || BROKEN 522 help 523 This is a very old hard disk driver that lacks the enhanced 524 functionality of the newer ones. 525 526 It is required for systems with ancient MFM/RLL/ESDI drives. 527 528 If unsure, say N. 529 530config BLK_DEV_RBD 531 tristate "Rados block device (RBD)" 532 depends on INET && BLOCK 533 select CEPH_LIB 534 select LIBCRC32C 535 select CRYPTO_AES 536 select CRYPTO 537 default n 538 help 539 Say Y here if you want include the Rados block device, which stripes 540 a block device over objects stored in the Ceph distributed object 541 store. 542 543 More information at http://ceph.newdream.net/. 544 545 If unsure, say N. 546 547config BLK_DEV_RSXX 548 tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver" 549 depends on PCI 550 help 551 Device driver for IBM's high speed PCIe SSD 552 storage device: Flash Adapter 900GB Full Height. 553 554 To compile this driver as a module, choose M here: the 555 module will be called rsxx. 556 557endif # BLK_DEV 558