xref: /openbmc/linux/drivers/bcma/driver_pci.c (revision 206a81c1)
1 /*
2  * Broadcom specific AMBA
3  * PCI Core
4  *
5  * Copyright 2005, 2011, Broadcom Corporation
6  * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
7  * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
8  *
9  * Licensed under the GNU/GPL. See COPYING for details.
10  */
11 
12 #include "bcma_private.h"
13 #include <linux/export.h>
14 #include <linux/bcma/bcma.h>
15 
16 /**************************************************
17  * R/W ops.
18  **************************************************/
19 
20 u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
21 {
22 	pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address);
23 	pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
24 	return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA);
25 }
26 
27 static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
28 {
29 	pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address);
30 	pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
31 	pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data);
32 }
33 
34 static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy)
35 {
36 	u32 v;
37 	int i;
38 
39 	v = BCMA_CORE_PCI_MDIODATA_START;
40 	v |= BCMA_CORE_PCI_MDIODATA_WRITE;
41 	v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
42 	      BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
43 	v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
44 	      BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
45 	v |= BCMA_CORE_PCI_MDIODATA_TA;
46 	v |= (phy << 4);
47 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
48 
49 	udelay(10);
50 	for (i = 0; i < 200; i++) {
51 		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
52 		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
53 			break;
54 		usleep_range(1000, 2000);
55 	}
56 }
57 
58 static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address)
59 {
60 	int max_retries = 10;
61 	u16 ret = 0;
62 	u32 v;
63 	int i;
64 
65 	/* enable mdio access to SERDES */
66 	v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN;
67 	v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL;
68 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v);
69 
70 	if (pc->core->id.rev >= 10) {
71 		max_retries = 200;
72 		bcma_pcie_mdio_set_phy(pc, device);
73 		v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
74 		     BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
75 		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
76 	} else {
77 		v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD);
78 		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
79 	}
80 
81 	v = BCMA_CORE_PCI_MDIODATA_START;
82 	v |= BCMA_CORE_PCI_MDIODATA_READ;
83 	v |= BCMA_CORE_PCI_MDIODATA_TA;
84 
85 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
86 	/* Wait for the device to complete the transaction */
87 	udelay(10);
88 	for (i = 0; i < max_retries; i++) {
89 		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
90 		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) {
91 			udelay(10);
92 			ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA);
93 			break;
94 		}
95 		usleep_range(1000, 2000);
96 	}
97 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
98 	return ret;
99 }
100 
101 static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device,
102 				u8 address, u16 data)
103 {
104 	int max_retries = 10;
105 	u32 v;
106 	int i;
107 
108 	/* enable mdio access to SERDES */
109 	v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN;
110 	v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL;
111 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v);
112 
113 	if (pc->core->id.rev >= 10) {
114 		max_retries = 200;
115 		bcma_pcie_mdio_set_phy(pc, device);
116 		v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
117 		     BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
118 		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
119 	} else {
120 		v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD);
121 		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
122 	}
123 
124 	v = BCMA_CORE_PCI_MDIODATA_START;
125 	v |= BCMA_CORE_PCI_MDIODATA_WRITE;
126 	v |= BCMA_CORE_PCI_MDIODATA_TA;
127 	v |= data;
128 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);
129 	/* Wait for the device to complete the transaction */
130 	udelay(10);
131 	for (i = 0; i < max_retries; i++) {
132 		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
133 		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
134 			break;
135 		usleep_range(1000, 2000);
136 	}
137 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
138 }
139 
140 static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device,
141 				    u8 address, u16 data)
142 {
143 	bcma_pcie_mdio_write(pc, device, address, data);
144 	return bcma_pcie_mdio_read(pc, device, address);
145 }
146 
147 /**************************************************
148  * Workarounds.
149  **************************************************/
150 
151 static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
152 {
153 	u32 tmp;
154 
155 	tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG);
156 	if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT)
157 		return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE |
158 		       BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY;
159 	else
160 		return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE;
161 }
162 
163 static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
164 {
165 	u16 tmp;
166 
167 	bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX,
168 	                     BCMA_CORE_PCI_SERDES_RX_CTRL,
169 			     bcma_pcicore_polarity_workaround(pc));
170 	tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL,
171 	                          BCMA_CORE_PCI_SERDES_PLL_CTRL);
172 	if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN)
173 		bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL,
174 		                     BCMA_CORE_PCI_SERDES_PLL_CTRL,
175 		                     tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN);
176 }
177 
178 static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc)
179 {
180 	struct bcma_device *core = pc->core;
181 	u16 val16, core_index;
182 	uint regoff;
183 
184 	regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET);
185 	core_index = (u16)core->core_index;
186 
187 	val16 = pcicore_read16(pc, regoff);
188 	if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT)
189 	     != core_index) {
190 		val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) |
191 			(val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK);
192 		pcicore_write16(pc, regoff, val16);
193 	}
194 }
195 
196 /* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */
197 /* Needs to happen when coming out of 'standby'/'hibernate' */
198 static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc)
199 {
200 	u16 val16;
201 	uint regoff;
202 
203 	regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG);
204 
205 	val16 = pcicore_read16(pc, regoff);
206 
207 	if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) {
208 		val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST;
209 		pcicore_write16(pc, regoff, val16);
210 	}
211 }
212 
213 /**************************************************
214  * Init.
215  **************************************************/
216 
217 static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
218 {
219 	bcma_core_pci_fixcfg(pc);
220 	bcma_pcicore_serdes_workaround(pc);
221 	bcma_core_pci_config_fixup(pc);
222 }
223 
224 void bcma_core_pci_init(struct bcma_drv_pci *pc)
225 {
226 	if (pc->setup_done)
227 		return;
228 
229 #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
230 	pc->hostmode = bcma_core_pci_is_in_hostmode(pc);
231 	if (pc->hostmode)
232 		bcma_core_pci_hostmode_init(pc);
233 #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
234 
235 	if (!pc->hostmode)
236 		bcma_core_pci_clientmode_init(pc);
237 }
238 
239 void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
240 {
241 	struct bcma_drv_pci *pc;
242 	u16 data;
243 
244 	if (bus->hosttype != BCMA_HOSTTYPE_PCI)
245 		return;
246 
247 	pc = &bus->drv_pci[0];
248 
249 	if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) {
250 		data = up ? 0x74 : 0x7C;
251 		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
252 					 BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64);
253 		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
254 					 BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
255 	} else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) {
256 		data = up ? 0x75 : 0x7D;
257 		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
258 					 BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65);
259 		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
260 					 BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
261 	}
262 }
263 EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
264 
265 int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
266 			  bool enable)
267 {
268 	struct pci_dev *pdev;
269 	u32 coremask, tmp;
270 	int err = 0;
271 
272 	if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
273 		/* This bcma device is not on a PCI host-bus. So the IRQs are
274 		 * not routed through the PCI core.
275 		 * So we must not enable routing through the PCI core. */
276 		goto out;
277 	}
278 
279 	pdev = pc->core->bus->host_pci;
280 
281 	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
282 	if (err)
283 		goto out;
284 
285 	coremask = BIT(core->core_index) << 8;
286 	if (enable)
287 		tmp |= coremask;
288 	else
289 		tmp &= ~coremask;
290 
291 	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
292 
293 out:
294 	return err;
295 }
296 EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
297 
298 static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
299 {
300 	u32 w;
301 
302 	w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
303 	if (extend)
304 		w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND;
305 	else
306 		w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND;
307 	bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w);
308 	bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
309 }
310 
311 void bcma_core_pci_up(struct bcma_bus *bus)
312 {
313 	struct bcma_drv_pci *pc;
314 
315 	if (bus->hosttype != BCMA_HOSTTYPE_PCI)
316 		return;
317 
318 	pc = &bus->drv_pci[0];
319 
320 	bcma_core_pci_extend_L1timer(pc, true);
321 }
322 EXPORT_SYMBOL_GPL(bcma_core_pci_up);
323 
324 void bcma_core_pci_down(struct bcma_bus *bus)
325 {
326 	struct bcma_drv_pci *pc;
327 
328 	if (bus->hosttype != BCMA_HOSTTYPE_PCI)
329 		return;
330 
331 	pc = &bus->drv_pci[0];
332 
333 	bcma_core_pci_extend_L1timer(pc, false);
334 }
335 EXPORT_SYMBOL_GPL(bcma_core_pci_down);
336