xref: /openbmc/linux/drivers/bcma/driver_chipcommon_sflash.c (revision d57ef3a6)

/*
 * Broadcom specific AMBA
 * ChipCommon serial flash interface
 *
 * Licensed under the GNU/GPL. See COPYING for details.
 */

#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>

#include "bcma_private.h"

static struct resource bcma_sflash_resource = {
	.name	= "bcma_sflash",
	.start	= BCMA_SFLASH,
	.end	= 0,
	.flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
};

struct platform_device bcma_sflash_dev = {
	.name		= "bcma_sflash",
	.resource	= &bcma_sflash_resource,
	.num_resources	= 1,
};

struct bcma_sflash_tbl_e {
	char *name;
	u32 id;
	u32 blocksize;
	u16 numblocks;
};

static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
	{ "", 0x14, 0x10000, 32, },
	{ 0 },
};

static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
	{ 0 },
};

static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
	{ 0 },
};

static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
{
	int i;
	bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
			BCMA_CC_FLASHCTL_START | opcode);
	for (i = 0; i < 1000; i++) {
		if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) &
		      BCMA_CC_FLASHCTL_BUSY))
			return;
		cpu_relax();
	}
	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
}

/* Initialize serial flash access */
int bcma_sflash_init(struct bcma_drv_cc *cc)
{
	struct bcma_bus *bus = cc->core->bus;
	struct bcma_sflash *sflash = &cc->sflash;
	struct bcma_sflash_tbl_e *e;
	u32 id, id2;

	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
	case BCMA_CC_FLASHT_STSER:
		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);

		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);

		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
		id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);

		switch (id) {
		case 0xbf:
			for (e = bcma_sflash_sst_tbl; e->name; e++) {
				if (e->id == id2)
					break;
			}
			break;
		default:
			for (e = bcma_sflash_st_tbl; e->name; e++) {
				if (e->id == id)
					break;
			}
			break;
		}
		if (!e->name) {
			bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
			return -ENOTSUPP;
		}

		break;
	case BCMA_CC_FLASHT_ATSER:
		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;

		for (e = bcma_sflash_at_tbl; e->name; e++) {
			if (e->id == id)
				break;
		}
		if (!e->name) {
			bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id);
			return -ENOTSUPP;
		}

		break;
	default:
		bcma_err(bus, "Unsupported flash type\n");
		return -ENOTSUPP;
	}

	sflash->window = BCMA_SFLASH;
	sflash->blocksize = e->blocksize;
	sflash->numblocks = e->numblocks;
	sflash->size = sflash->blocksize * sflash->numblocks;
	sflash->present = true;

	bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
		  e->name, sflash->size / 1024, sflash->blocksize,
		  sflash->numblocks);

	/* Prepare platform device, but don't register it yet. It's too early,
	 * malloc (required by device_private_init) is not available yet. */
	bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start +
					  sflash->size;
	bcma_sflash_dev.dev.platform_data = sflash;

	return 0;
}