xref: /openbmc/linux/drivers/base/pinctrl.c (revision 7effbd18)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Driver core interface to the pinctrl subsystem.
4  *
5  * Copyright (C) 2012 ST-Ericsson SA
6  * Written on behalf of Linaro for ST-Ericsson
7  * Based on bits of regulator core, gpio core and clk core
8  *
9  * Author: Linus Walleij <linus.walleij@linaro.org>
10  */
11 
12 #include <linux/device.h>
13 #include <linux/pinctrl/devinfo.h>
14 #include <linux/pinctrl/consumer.h>
15 #include <linux/slab.h>
16 
17 /**
18  * pinctrl_bind_pins() - called by the device core before probe
19  * @dev: the device that is just about to probe
20  */
21 int pinctrl_bind_pins(struct device *dev)
22 {
23 	int ret;
24 
25 	if (dev->of_node_reused)
26 		return 0;
27 
28 	dev->pins = devm_kzalloc(dev, sizeof(*(dev->pins)), GFP_KERNEL);
29 	if (!dev->pins)
30 		return -ENOMEM;
31 
32 	dev->pins->p = devm_pinctrl_get(dev);
33 	if (IS_ERR(dev->pins->p)) {
34 		dev_dbg(dev, "no pinctrl handle\n");
35 		ret = PTR_ERR(dev->pins->p);
36 		goto cleanup_alloc;
37 	}
38 
39 	dev->pins->default_state = pinctrl_lookup_state(dev->pins->p,
40 					PINCTRL_STATE_DEFAULT);
41 	if (IS_ERR(dev->pins->default_state)) {
42 		dev_dbg(dev, "no default pinctrl state\n");
43 		ret = 0;
44 		goto cleanup_get;
45 	}
46 
47 	dev->pins->init_state = pinctrl_lookup_state(dev->pins->p,
48 					PINCTRL_STATE_INIT);
49 	if (IS_ERR(dev->pins->init_state)) {
50 		/* Not supplying this state is perfectly legal */
51 		dev_dbg(dev, "no init pinctrl state\n");
52 
53 		ret = pinctrl_select_state(dev->pins->p,
54 					   dev->pins->default_state);
55 	} else {
56 		ret = pinctrl_select_state(dev->pins->p, dev->pins->init_state);
57 	}
58 
59 	if (ret) {
60 		dev_dbg(dev, "failed to activate initial pinctrl state\n");
61 		goto cleanup_get;
62 	}
63 
64 #ifdef CONFIG_PM
65 	/*
66 	 * If power management is enabled, we also look for the optional
67 	 * sleep and idle pin states, with semantics as defined in
68 	 * <linux/pinctrl/pinctrl-state.h>
69 	 */
70 	dev->pins->sleep_state = pinctrl_lookup_state(dev->pins->p,
71 					PINCTRL_STATE_SLEEP);
72 	if (IS_ERR(dev->pins->sleep_state))
73 		/* Not supplying this state is perfectly legal */
74 		dev_dbg(dev, "no sleep pinctrl state\n");
75 
76 	dev->pins->idle_state = pinctrl_lookup_state(dev->pins->p,
77 					PINCTRL_STATE_IDLE);
78 	if (IS_ERR(dev->pins->idle_state))
79 		/* Not supplying this state is perfectly legal */
80 		dev_dbg(dev, "no idle pinctrl state\n");
81 #endif
82 
83 	return 0;
84 
85 	/*
86 	 * If no pinctrl handle or default state was found for this device,
87 	 * let's explicitly free the pin container in the device, there is
88 	 * no point in keeping it around.
89 	 */
90 cleanup_get:
91 	devm_pinctrl_put(dev->pins->p);
92 cleanup_alloc:
93 	devm_kfree(dev, dev->pins);
94 	dev->pins = NULL;
95 
96 	/* Return deferrals */
97 	if (ret == -EPROBE_DEFER)
98 		return ret;
99 	/* Return serious errors */
100 	if (ret == -EINVAL)
101 		return ret;
102 	/* We ignore errors like -ENOENT meaning no pinctrl state */
103 
104 	return 0;
105 }
106