1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * HD44780 Character LCD driver for Linux 4 * 5 * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> 6 * Copyright (C) 2016-2017 Glider bvba 7 */ 8 9 #include <linux/delay.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/module.h> 12 #include <linux/mod_devicetable.h> 13 #include <linux/platform_device.h> 14 #include <linux/property.h> 15 #include <linux/slab.h> 16 17 #include <misc/charlcd.h> 18 19 20 enum hd44780_pin { 21 /* Order does matter due to writing to GPIO array subsets! */ 22 PIN_DATA0, /* Optional */ 23 PIN_DATA1, /* Optional */ 24 PIN_DATA2, /* Optional */ 25 PIN_DATA3, /* Optional */ 26 PIN_DATA4, 27 PIN_DATA5, 28 PIN_DATA6, 29 PIN_DATA7, 30 PIN_CTRL_RS, 31 PIN_CTRL_RW, /* Optional */ 32 PIN_CTRL_E, 33 PIN_CTRL_BL, /* Optional */ 34 PIN_NUM 35 }; 36 37 struct hd44780 { 38 struct gpio_desc *pins[PIN_NUM]; 39 }; 40 41 static void hd44780_backlight(struct charlcd *lcd, int on) 42 { 43 struct hd44780 *hd = lcd->drvdata; 44 45 if (hd->pins[PIN_CTRL_BL]) 46 gpiod_set_value_cansleep(hd->pins[PIN_CTRL_BL], on); 47 } 48 49 static void hd44780_strobe_gpio(struct hd44780 *hd) 50 { 51 /* Maintain the data during 20 us before the strobe */ 52 udelay(20); 53 54 gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 1); 55 56 /* Maintain the strobe during 40 us */ 57 udelay(40); 58 59 gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 0); 60 } 61 62 /* write to an LCD panel register in 8 bit GPIO mode */ 63 static void hd44780_write_gpio8(struct hd44780 *hd, u8 val, unsigned int rs) 64 { 65 DECLARE_BITMAP(values, 10); /* for DATA[0-7], RS, RW */ 66 unsigned int n; 67 68 values[0] = val; 69 __assign_bit(8, values, rs); 70 n = hd->pins[PIN_CTRL_RW] ? 10 : 9; 71 72 /* Present the data to the port */ 73 gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA0], NULL, values); 74 75 hd44780_strobe_gpio(hd); 76 } 77 78 /* write to an LCD panel register in 4 bit GPIO mode */ 79 static void hd44780_write_gpio4(struct hd44780 *hd, u8 val, unsigned int rs) 80 { 81 DECLARE_BITMAP(values, 6); /* for DATA[4-7], RS, RW */ 82 unsigned int n; 83 84 /* High nibble + RS, RW */ 85 values[0] = val >> 4; 86 __assign_bit(4, values, rs); 87 n = hd->pins[PIN_CTRL_RW] ? 6 : 5; 88 89 /* Present the data to the port */ 90 gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values); 91 92 hd44780_strobe_gpio(hd); 93 94 /* Low nibble */ 95 values[0] &= ~0x0fUL; 96 values[0] |= val & 0x0f; 97 98 /* Present the data to the port */ 99 gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values); 100 101 hd44780_strobe_gpio(hd); 102 } 103 104 /* Send a command to the LCD panel in 8 bit GPIO mode */ 105 static void hd44780_write_cmd_gpio8(struct charlcd *lcd, int cmd) 106 { 107 struct hd44780 *hd = lcd->drvdata; 108 109 hd44780_write_gpio8(hd, cmd, 0); 110 111 /* The shortest command takes at least 120 us */ 112 udelay(120); 113 } 114 115 /* Send data to the LCD panel in 8 bit GPIO mode */ 116 static void hd44780_write_data_gpio8(struct charlcd *lcd, int data) 117 { 118 struct hd44780 *hd = lcd->drvdata; 119 120 hd44780_write_gpio8(hd, data, 1); 121 122 /* The shortest data takes at least 45 us */ 123 udelay(45); 124 } 125 126 static const struct charlcd_ops hd44780_ops_gpio8 = { 127 .write_cmd = hd44780_write_cmd_gpio8, 128 .write_data = hd44780_write_data_gpio8, 129 .backlight = hd44780_backlight, 130 }; 131 132 /* Send a command to the LCD panel in 4 bit GPIO mode */ 133 static void hd44780_write_cmd_gpio4(struct charlcd *lcd, int cmd) 134 { 135 struct hd44780 *hd = lcd->drvdata; 136 137 hd44780_write_gpio4(hd, cmd, 0); 138 139 /* The shortest command takes at least 120 us */ 140 udelay(120); 141 } 142 143 /* Send 4-bits of a command to the LCD panel in raw 4 bit GPIO mode */ 144 static void hd44780_write_cmd_raw_gpio4(struct charlcd *lcd, int cmd) 145 { 146 DECLARE_BITMAP(values, 6); /* for DATA[4-7], RS, RW */ 147 struct hd44780 *hd = lcd->drvdata; 148 unsigned int n; 149 150 /* Command nibble + RS, RW */ 151 values[0] = cmd & 0x0f; 152 n = hd->pins[PIN_CTRL_RW] ? 6 : 5; 153 154 /* Present the data to the port */ 155 gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values); 156 157 hd44780_strobe_gpio(hd); 158 } 159 160 /* Send data to the LCD panel in 4 bit GPIO mode */ 161 static void hd44780_write_data_gpio4(struct charlcd *lcd, int data) 162 { 163 struct hd44780 *hd = lcd->drvdata; 164 165 hd44780_write_gpio4(hd, data, 1); 166 167 /* The shortest data takes at least 45 us */ 168 udelay(45); 169 } 170 171 static const struct charlcd_ops hd44780_ops_gpio4 = { 172 .write_cmd = hd44780_write_cmd_gpio4, 173 .write_cmd_raw4 = hd44780_write_cmd_raw_gpio4, 174 .write_data = hd44780_write_data_gpio4, 175 .backlight = hd44780_backlight, 176 }; 177 178 static int hd44780_probe(struct platform_device *pdev) 179 { 180 struct device *dev = &pdev->dev; 181 unsigned int i, base; 182 struct charlcd *lcd; 183 struct hd44780 *hd; 184 int ifwidth, ret; 185 186 /* Required pins */ 187 ifwidth = gpiod_count(dev, "data"); 188 if (ifwidth < 0) 189 return ifwidth; 190 191 switch (ifwidth) { 192 case 4: 193 base = PIN_DATA4; 194 break; 195 case 8: 196 base = PIN_DATA0; 197 break; 198 default: 199 return -EINVAL; 200 } 201 202 lcd = charlcd_alloc(sizeof(struct hd44780)); 203 if (!lcd) 204 return -ENOMEM; 205 206 hd = lcd->drvdata; 207 208 for (i = 0; i < ifwidth; i++) { 209 hd->pins[base + i] = devm_gpiod_get_index(dev, "data", i, 210 GPIOD_OUT_LOW); 211 if (IS_ERR(hd->pins[base + i])) { 212 ret = PTR_ERR(hd->pins[base + i]); 213 goto fail; 214 } 215 } 216 217 hd->pins[PIN_CTRL_E] = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); 218 if (IS_ERR(hd->pins[PIN_CTRL_E])) { 219 ret = PTR_ERR(hd->pins[PIN_CTRL_E]); 220 goto fail; 221 } 222 223 hd->pins[PIN_CTRL_RS] = devm_gpiod_get(dev, "rs", GPIOD_OUT_HIGH); 224 if (IS_ERR(hd->pins[PIN_CTRL_RS])) { 225 ret = PTR_ERR(hd->pins[PIN_CTRL_RS]); 226 goto fail; 227 } 228 229 /* Optional pins */ 230 hd->pins[PIN_CTRL_RW] = devm_gpiod_get_optional(dev, "rw", 231 GPIOD_OUT_LOW); 232 if (IS_ERR(hd->pins[PIN_CTRL_RW])) { 233 ret = PTR_ERR(hd->pins[PIN_CTRL_RW]); 234 goto fail; 235 } 236 237 hd->pins[PIN_CTRL_BL] = devm_gpiod_get_optional(dev, "backlight", 238 GPIOD_OUT_LOW); 239 if (IS_ERR(hd->pins[PIN_CTRL_BL])) { 240 ret = PTR_ERR(hd->pins[PIN_CTRL_BL]); 241 goto fail; 242 } 243 244 /* Required properties */ 245 ret = device_property_read_u32(dev, "display-height-chars", 246 &lcd->height); 247 if (ret) 248 goto fail; 249 ret = device_property_read_u32(dev, "display-width-chars", &lcd->width); 250 if (ret) 251 goto fail; 252 253 /* 254 * On displays with more than two rows, the internal buffer width is 255 * usually equal to the display width 256 */ 257 if (lcd->height > 2) 258 lcd->bwidth = lcd->width; 259 260 /* Optional properties */ 261 device_property_read_u32(dev, "internal-buffer-width", &lcd->bwidth); 262 263 lcd->ifwidth = ifwidth; 264 lcd->ops = ifwidth == 8 ? &hd44780_ops_gpio8 : &hd44780_ops_gpio4; 265 266 ret = charlcd_register(lcd); 267 if (ret) 268 goto fail; 269 270 platform_set_drvdata(pdev, lcd); 271 return 0; 272 273 fail: 274 charlcd_free(lcd); 275 return ret; 276 } 277 278 static int hd44780_remove(struct platform_device *pdev) 279 { 280 struct charlcd *lcd = platform_get_drvdata(pdev); 281 282 charlcd_unregister(lcd); 283 284 charlcd_free(lcd); 285 return 0; 286 } 287 288 static const struct of_device_id hd44780_of_match[] = { 289 { .compatible = "hit,hd44780" }, 290 { /* sentinel */ } 291 }; 292 MODULE_DEVICE_TABLE(of, hd44780_of_match); 293 294 static struct platform_driver hd44780_driver = { 295 .probe = hd44780_probe, 296 .remove = hd44780_remove, 297 .driver = { 298 .name = "hd44780", 299 .of_match_table = hd44780_of_match, 300 }, 301 }; 302 303 module_platform_driver(hd44780_driver); 304 MODULE_DESCRIPTION("HD44780 Character LCD driver"); 305 MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>"); 306 MODULE_LICENSE("GPL"); 307