1 /* 2 * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA 3 * 4 * Maintained by: Jeremy Higdon @ SGI 5 * Please ALWAYS copy linux-ide@vger.kernel.org 6 * on emails. 7 * 8 * Copyright 2004 SGI 9 * 10 * Bits from Jeff Garzik, Copyright RedHat, Inc. 11 * 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2, or (at your option) 16 * any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; see the file COPYING. If not, write to 25 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 26 * 27 * 28 * libata documentation is available via 'make {ps|pdf}docs', 29 * as Documentation/DocBook/libata.* 30 * 31 * Vitesse hardware documentation presumably available under NDA. 32 * Intel 31244 (same hardware interface) documentation presumably 33 * available from http://developer.intel.com/ 34 * 35 */ 36 37 #include <linux/kernel.h> 38 #include <linux/module.h> 39 #include <linux/pci.h> 40 #include <linux/blkdev.h> 41 #include <linux/delay.h> 42 #include <linux/interrupt.h> 43 #include <linux/dma-mapping.h> 44 #include <linux/device.h> 45 #include <scsi/scsi_host.h> 46 #include <linux/libata.h> 47 48 #define DRV_NAME "sata_vsc" 49 #define DRV_VERSION "2.3" 50 51 enum { 52 VSC_MMIO_BAR = 0, 53 54 /* Interrupt register offsets (from chip base address) */ 55 VSC_SATA_INT_STAT_OFFSET = 0x00, 56 VSC_SATA_INT_MASK_OFFSET = 0x04, 57 58 /* Taskfile registers offsets */ 59 VSC_SATA_TF_CMD_OFFSET = 0x00, 60 VSC_SATA_TF_DATA_OFFSET = 0x00, 61 VSC_SATA_TF_ERROR_OFFSET = 0x04, 62 VSC_SATA_TF_FEATURE_OFFSET = 0x06, 63 VSC_SATA_TF_NSECT_OFFSET = 0x08, 64 VSC_SATA_TF_LBAL_OFFSET = 0x0c, 65 VSC_SATA_TF_LBAM_OFFSET = 0x10, 66 VSC_SATA_TF_LBAH_OFFSET = 0x14, 67 VSC_SATA_TF_DEVICE_OFFSET = 0x18, 68 VSC_SATA_TF_STATUS_OFFSET = 0x1c, 69 VSC_SATA_TF_COMMAND_OFFSET = 0x1d, 70 VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28, 71 VSC_SATA_TF_CTL_OFFSET = 0x29, 72 73 /* DMA base */ 74 VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64, 75 VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C, 76 VSC_SATA_DMA_CMD_OFFSET = 0x70, 77 78 /* SCRs base */ 79 VSC_SATA_SCR_STATUS_OFFSET = 0x100, 80 VSC_SATA_SCR_ERROR_OFFSET = 0x104, 81 VSC_SATA_SCR_CONTROL_OFFSET = 0x108, 82 83 /* Port stride */ 84 VSC_SATA_PORT_OFFSET = 0x200, 85 86 /* Error interrupt status bit offsets */ 87 VSC_SATA_INT_ERROR_CRC = 0x40, 88 VSC_SATA_INT_ERROR_T = 0x20, 89 VSC_SATA_INT_ERROR_P = 0x10, 90 VSC_SATA_INT_ERROR_R = 0x8, 91 VSC_SATA_INT_ERROR_E = 0x4, 92 VSC_SATA_INT_ERROR_M = 0x2, 93 VSC_SATA_INT_PHY_CHANGE = 0x1, 94 VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \ 95 VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \ 96 VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \ 97 VSC_SATA_INT_PHY_CHANGE), 98 }; 99 100 static int vsc_sata_scr_read(struct ata_link *link, 101 unsigned int sc_reg, u32 *val) 102 { 103 if (sc_reg > SCR_CONTROL) 104 return -EINVAL; 105 *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4)); 106 return 0; 107 } 108 109 110 static int vsc_sata_scr_write(struct ata_link *link, 111 unsigned int sc_reg, u32 val) 112 { 113 if (sc_reg > SCR_CONTROL) 114 return -EINVAL; 115 writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); 116 return 0; 117 } 118 119 120 static void vsc_freeze(struct ata_port *ap) 121 { 122 void __iomem *mask_addr; 123 124 mask_addr = ap->host->iomap[VSC_MMIO_BAR] + 125 VSC_SATA_INT_MASK_OFFSET + ap->port_no; 126 127 writeb(0, mask_addr); 128 } 129 130 131 static void vsc_thaw(struct ata_port *ap) 132 { 133 void __iomem *mask_addr; 134 135 mask_addr = ap->host->iomap[VSC_MMIO_BAR] + 136 VSC_SATA_INT_MASK_OFFSET + ap->port_no; 137 138 writeb(0xff, mask_addr); 139 } 140 141 142 static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) 143 { 144 void __iomem *mask_addr; 145 u8 mask; 146 147 mask_addr = ap->host->iomap[VSC_MMIO_BAR] + 148 VSC_SATA_INT_MASK_OFFSET + ap->port_no; 149 mask = readb(mask_addr); 150 if (ctl & ATA_NIEN) 151 mask |= 0x80; 152 else 153 mask &= 0x7F; 154 writeb(mask, mask_addr); 155 } 156 157 158 static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) 159 { 160 struct ata_ioports *ioaddr = &ap->ioaddr; 161 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; 162 163 /* 164 * The only thing the ctl register is used for is SRST. 165 * That is not enabled or disabled via tf_load. 166 * However, if ATA_NIEN is changed, then we need to change 167 * the interrupt register. 168 */ 169 if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) { 170 ap->last_ctl = tf->ctl; 171 vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN); 172 } 173 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { 174 writew(tf->feature | (((u16)tf->hob_feature) << 8), 175 ioaddr->feature_addr); 176 writew(tf->nsect | (((u16)tf->hob_nsect) << 8), 177 ioaddr->nsect_addr); 178 writew(tf->lbal | (((u16)tf->hob_lbal) << 8), 179 ioaddr->lbal_addr); 180 writew(tf->lbam | (((u16)tf->hob_lbam) << 8), 181 ioaddr->lbam_addr); 182 writew(tf->lbah | (((u16)tf->hob_lbah) << 8), 183 ioaddr->lbah_addr); 184 } else if (is_addr) { 185 writew(tf->feature, ioaddr->feature_addr); 186 writew(tf->nsect, ioaddr->nsect_addr); 187 writew(tf->lbal, ioaddr->lbal_addr); 188 writew(tf->lbam, ioaddr->lbam_addr); 189 writew(tf->lbah, ioaddr->lbah_addr); 190 } 191 192 if (tf->flags & ATA_TFLAG_DEVICE) 193 writeb(tf->device, ioaddr->device_addr); 194 195 ata_wait_idle(ap); 196 } 197 198 199 static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) 200 { 201 struct ata_ioports *ioaddr = &ap->ioaddr; 202 u16 nsect, lbal, lbam, lbah, feature; 203 204 tf->command = ata_sff_check_status(ap); 205 tf->device = readw(ioaddr->device_addr); 206 feature = readw(ioaddr->error_addr); 207 nsect = readw(ioaddr->nsect_addr); 208 lbal = readw(ioaddr->lbal_addr); 209 lbam = readw(ioaddr->lbam_addr); 210 lbah = readw(ioaddr->lbah_addr); 211 212 tf->feature = feature; 213 tf->nsect = nsect; 214 tf->lbal = lbal; 215 tf->lbam = lbam; 216 tf->lbah = lbah; 217 218 if (tf->flags & ATA_TFLAG_LBA48) { 219 tf->hob_feature = feature >> 8; 220 tf->hob_nsect = nsect >> 8; 221 tf->hob_lbal = lbal >> 8; 222 tf->hob_lbam = lbam >> 8; 223 tf->hob_lbah = lbah >> 8; 224 } 225 } 226 227 static inline void vsc_error_intr(u8 port_status, struct ata_port *ap) 228 { 229 if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M)) 230 ata_port_freeze(ap); 231 else 232 ata_port_abort(ap); 233 } 234 235 static void vsc_port_intr(u8 port_status, struct ata_port *ap) 236 { 237 struct ata_queued_cmd *qc; 238 int handled = 0; 239 240 if (unlikely(port_status & VSC_SATA_INT_ERROR)) { 241 vsc_error_intr(port_status, ap); 242 return; 243 } 244 245 qc = ata_qc_from_tag(ap, ap->link.active_tag); 246 if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING))) 247 handled = ata_bmdma_port_intr(ap, qc); 248 249 /* We received an interrupt during a polled command, 250 * or some other spurious condition. Interrupt reporting 251 * with this hardware is fairly reliable so it is safe to 252 * simply clear the interrupt 253 */ 254 if (unlikely(!handled)) 255 ap->ops->sff_check_status(ap); 256 } 257 258 /* 259 * vsc_sata_interrupt 260 * 261 * Read the interrupt register and process for the devices that have 262 * them pending. 263 */ 264 static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance) 265 { 266 struct ata_host *host = dev_instance; 267 unsigned int i; 268 unsigned int handled = 0; 269 u32 status; 270 271 status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET); 272 273 if (unlikely(status == 0xffffffff || status == 0)) { 274 if (status) 275 dev_err(host->dev, 276 ": IRQ status == 0xffffffff, PCI fault or device removal?\n"); 277 goto out; 278 } 279 280 spin_lock(&host->lock); 281 282 for (i = 0; i < host->n_ports; i++) { 283 u8 port_status = (status >> (8 * i)) & 0xff; 284 if (port_status) { 285 vsc_port_intr(port_status, host->ports[i]); 286 handled++; 287 } 288 } 289 290 spin_unlock(&host->lock); 291 out: 292 return IRQ_RETVAL(handled); 293 } 294 295 296 static struct scsi_host_template vsc_sata_sht = { 297 ATA_BMDMA_SHT(DRV_NAME), 298 }; 299 300 301 static struct ata_port_operations vsc_sata_ops = { 302 .inherits = &ata_bmdma_port_ops, 303 /* The IRQ handling is not quite standard SFF behaviour so we 304 cannot use the default lost interrupt handler */ 305 .lost_interrupt = ATA_OP_NULL, 306 .sff_tf_load = vsc_sata_tf_load, 307 .sff_tf_read = vsc_sata_tf_read, 308 .freeze = vsc_freeze, 309 .thaw = vsc_thaw, 310 .scr_read = vsc_sata_scr_read, 311 .scr_write = vsc_sata_scr_write, 312 }; 313 314 static void vsc_sata_setup_port(struct ata_ioports *port, void __iomem *base) 315 { 316 port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET; 317 port->data_addr = base + VSC_SATA_TF_DATA_OFFSET; 318 port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET; 319 port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET; 320 port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET; 321 port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET; 322 port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET; 323 port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET; 324 port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET; 325 port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET; 326 port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET; 327 port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET; 328 port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET; 329 port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET; 330 port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET; 331 writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET); 332 writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET); 333 } 334 335 336 static int vsc_sata_init_one(struct pci_dev *pdev, 337 const struct pci_device_id *ent) 338 { 339 static const struct ata_port_info pi = { 340 .flags = ATA_FLAG_SATA, 341 .pio_mask = ATA_PIO4, 342 .mwdma_mask = ATA_MWDMA2, 343 .udma_mask = ATA_UDMA6, 344 .port_ops = &vsc_sata_ops, 345 }; 346 const struct ata_port_info *ppi[] = { &pi, NULL }; 347 struct ata_host *host; 348 void __iomem *mmio_base; 349 int i, rc; 350 u8 cls; 351 352 ata_print_version_once(&pdev->dev, DRV_VERSION); 353 354 /* allocate host */ 355 host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4); 356 if (!host) 357 return -ENOMEM; 358 359 rc = pcim_enable_device(pdev); 360 if (rc) 361 return rc; 362 363 /* check if we have needed resource mapped */ 364 if (pci_resource_len(pdev, 0) == 0) 365 return -ENODEV; 366 367 /* map IO regions and initialize host accordingly */ 368 rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME); 369 if (rc == -EBUSY) 370 pcim_pin_device(pdev); 371 if (rc) 372 return rc; 373 host->iomap = pcim_iomap_table(pdev); 374 375 mmio_base = host->iomap[VSC_MMIO_BAR]; 376 377 for (i = 0; i < host->n_ports; i++) { 378 struct ata_port *ap = host->ports[i]; 379 unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET; 380 381 vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset); 382 383 ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio"); 384 ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port"); 385 } 386 387 /* 388 * Use 32 bit DMA mask, because 64 bit address support is poor. 389 */ 390 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); 391 if (rc) 392 return rc; 393 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); 394 if (rc) 395 return rc; 396 397 /* 398 * Due to a bug in the chip, the default cache line size can't be 399 * used (unless the default is non-zero). 400 */ 401 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls); 402 if (cls == 0x00) 403 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); 404 405 if (pci_enable_msi(pdev) == 0) 406 pci_intx(pdev, 0); 407 408 /* 409 * Config offset 0x98 is "Extended Control and Status Register 0" 410 * Default value is (1 << 28). All bits except bit 28 are reserved in 411 * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. 412 * If bit 28 is clear, each port has its own LED. 413 */ 414 pci_write_config_dword(pdev, 0x98, 0); 415 416 pci_set_master(pdev); 417 return ata_host_activate(host, pdev->irq, vsc_sata_interrupt, 418 IRQF_SHARED, &vsc_sata_sht); 419 } 420 421 static const struct pci_device_id vsc_sata_pci_tbl[] = { 422 { PCI_VENDOR_ID_VITESSE, 0x7174, 423 PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, 424 { PCI_VENDOR_ID_INTEL, 0x3200, 425 PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, 426 427 { } /* terminate list */ 428 }; 429 430 static struct pci_driver vsc_sata_pci_driver = { 431 .name = DRV_NAME, 432 .id_table = vsc_sata_pci_tbl, 433 .probe = vsc_sata_init_one, 434 .remove = ata_pci_remove_one, 435 }; 436 437 module_pci_driver(vsc_sata_pci_driver); 438 439 MODULE_AUTHOR("Jeremy Higdon"); 440 MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller"); 441 MODULE_LICENSE("GPL"); 442 MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl); 443 MODULE_VERSION(DRV_VERSION); 444