1 /* 2 * sata_via.c - VIA Serial ATA controllers 3 * 4 * Maintained by: Jeff Garzik <jgarzik@pobox.com> 5 * Please ALWAYS copy linux-ide@vger.kernel.org 6 * on emails. 7 * 8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved. 9 * Copyright 2003-2004 Jeff Garzik 10 * 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2, or (at your option) 15 * any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; see the file COPYING. If not, write to 24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * 27 * libata documentation is available via 'make {ps|pdf}docs', 28 * as Documentation/DocBook/libata.* 29 * 30 * Hardware documentation available under NDA. 31 * 32 * 33 * 34 */ 35 36 #include <linux/kernel.h> 37 #include <linux/module.h> 38 #include <linux/pci.h> 39 #include <linux/init.h> 40 #include <linux/blkdev.h> 41 #include <linux/delay.h> 42 #include <linux/device.h> 43 #include <scsi/scsi.h> 44 #include <scsi/scsi_cmnd.h> 45 #include <scsi/scsi_host.h> 46 #include <linux/libata.h> 47 48 #define DRV_NAME "sata_via" 49 #define DRV_VERSION "2.6" 50 51 /* 52 * vt8251 is different from other sata controllers of VIA. It has two 53 * channels, each channel has both Master and Slave slot. 54 */ 55 enum board_ids_enum { 56 vt6420, 57 vt6421, 58 vt8251, 59 }; 60 61 enum { 62 SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ 63 SATA_INT_GATE = 0x41, /* SATA interrupt gating */ 64 SATA_NATIVE_MODE = 0x42, /* Native mode enable */ 65 PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ 66 PATA_PIO_TIMING = 0xAB, /* PATA timing register */ 67 68 PORT0 = (1 << 1), 69 PORT1 = (1 << 0), 70 ALL_PORTS = PORT0 | PORT1, 71 72 NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), 73 74 SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ 75 }; 76 77 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); 78 static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); 79 static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); 80 static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val); 81 static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); 82 static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); 83 static void svia_noop_freeze(struct ata_port *ap); 84 static int vt6420_prereset(struct ata_link *link, unsigned long deadline); 85 static void vt6420_bmdma_start(struct ata_queued_cmd *qc); 86 static int vt6421_pata_cable_detect(struct ata_port *ap); 87 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); 88 static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); 89 90 static const struct pci_device_id svia_pci_tbl[] = { 91 { PCI_VDEVICE(VIA, 0x5337), vt6420 }, 92 { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */ 93 { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */ 94 { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */ 95 { PCI_VDEVICE(VIA, 0x5372), vt6420 }, 96 { PCI_VDEVICE(VIA, 0x7372), vt6420 }, 97 { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ 98 { PCI_VDEVICE(VIA, 0x9000), vt8251 }, 99 100 { } /* terminate list */ 101 }; 102 103 static struct pci_driver svia_pci_driver = { 104 .name = DRV_NAME, 105 .id_table = svia_pci_tbl, 106 .probe = svia_init_one, 107 #ifdef CONFIG_PM 108 .suspend = ata_pci_device_suspend, 109 .resume = ata_pci_device_resume, 110 #endif 111 .remove = ata_pci_remove_one, 112 }; 113 114 static struct scsi_host_template svia_sht = { 115 ATA_BMDMA_SHT(DRV_NAME), 116 }; 117 118 static struct ata_port_operations svia_base_ops = { 119 .inherits = &ata_bmdma_port_ops, 120 .sff_tf_load = svia_tf_load, 121 }; 122 123 static struct ata_port_operations vt6420_sata_ops = { 124 .inherits = &svia_base_ops, 125 .freeze = svia_noop_freeze, 126 .prereset = vt6420_prereset, 127 .bmdma_start = vt6420_bmdma_start, 128 }; 129 130 static struct ata_port_operations vt6421_pata_ops = { 131 .inherits = &svia_base_ops, 132 .cable_detect = vt6421_pata_cable_detect, 133 .set_piomode = vt6421_set_pio_mode, 134 .set_dmamode = vt6421_set_dma_mode, 135 }; 136 137 static struct ata_port_operations vt6421_sata_ops = { 138 .inherits = &svia_base_ops, 139 .scr_read = svia_scr_read, 140 .scr_write = svia_scr_write, 141 }; 142 143 static struct ata_port_operations vt8251_ops = { 144 .inherits = &svia_base_ops, 145 .hardreset = sata_std_hardreset, 146 .scr_read = vt8251_scr_read, 147 .scr_write = vt8251_scr_write, 148 }; 149 150 static const struct ata_port_info vt6420_port_info = { 151 .flags = ATA_FLAG_SATA, 152 .pio_mask = ATA_PIO4, 153 .mwdma_mask = ATA_MWDMA2, 154 .udma_mask = ATA_UDMA6, 155 .port_ops = &vt6420_sata_ops, 156 }; 157 158 static struct ata_port_info vt6421_sport_info = { 159 .flags = ATA_FLAG_SATA, 160 .pio_mask = ATA_PIO4, 161 .mwdma_mask = ATA_MWDMA2, 162 .udma_mask = ATA_UDMA6, 163 .port_ops = &vt6421_sata_ops, 164 }; 165 166 static struct ata_port_info vt6421_pport_info = { 167 .flags = ATA_FLAG_SLAVE_POSS, 168 .pio_mask = ATA_PIO4, 169 /* No MWDMA */ 170 .udma_mask = ATA_UDMA6, 171 .port_ops = &vt6421_pata_ops, 172 }; 173 174 static struct ata_port_info vt8251_port_info = { 175 .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS, 176 .pio_mask = ATA_PIO4, 177 .mwdma_mask = ATA_MWDMA2, 178 .udma_mask = ATA_UDMA6, 179 .port_ops = &vt8251_ops, 180 }; 181 182 MODULE_AUTHOR("Jeff Garzik"); 183 MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); 184 MODULE_LICENSE("GPL"); 185 MODULE_DEVICE_TABLE(pci, svia_pci_tbl); 186 MODULE_VERSION(DRV_VERSION); 187 188 static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) 189 { 190 if (sc_reg > SCR_CONTROL) 191 return -EINVAL; 192 *val = ioread32(link->ap->ioaddr.scr_addr + (4 * sc_reg)); 193 return 0; 194 } 195 196 static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) 197 { 198 if (sc_reg > SCR_CONTROL) 199 return -EINVAL; 200 iowrite32(val, link->ap->ioaddr.scr_addr + (4 * sc_reg)); 201 return 0; 202 } 203 204 static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val) 205 { 206 static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; 207 struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); 208 int slot = 2 * link->ap->port_no + link->pmp; 209 u32 v = 0; 210 u8 raw; 211 212 switch (scr) { 213 case SCR_STATUS: 214 pci_read_config_byte(pdev, 0xA0 + slot, &raw); 215 216 /* read the DET field, bit0 and 1 of the config byte */ 217 v |= raw & 0x03; 218 219 /* read the SPD field, bit4 of the configure byte */ 220 if (raw & (1 << 4)) 221 v |= 0x02 << 4; 222 else 223 v |= 0x01 << 4; 224 225 /* read the IPM field, bit2 and 3 of the config byte */ 226 v |= ipm_tbl[(raw >> 2) & 0x3]; 227 break; 228 229 case SCR_ERROR: 230 /* devices other than 5287 uses 0xA8 as base */ 231 WARN_ON(pdev->device != 0x5287); 232 pci_read_config_dword(pdev, 0xB0 + slot * 4, &v); 233 break; 234 235 case SCR_CONTROL: 236 pci_read_config_byte(pdev, 0xA4 + slot, &raw); 237 238 /* read the DET field, bit0 and bit1 */ 239 v |= ((raw & 0x02) << 1) | (raw & 0x01); 240 241 /* read the IPM field, bit2 and bit3 */ 242 v |= ((raw >> 2) & 0x03) << 8; 243 break; 244 245 default: 246 return -EINVAL; 247 } 248 249 *val = v; 250 return 0; 251 } 252 253 static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val) 254 { 255 struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); 256 int slot = 2 * link->ap->port_no + link->pmp; 257 u32 v = 0; 258 259 switch (scr) { 260 case SCR_ERROR: 261 /* devices other than 5287 uses 0xA8 as base */ 262 WARN_ON(pdev->device != 0x5287); 263 pci_write_config_dword(pdev, 0xB0 + slot * 4, val); 264 return 0; 265 266 case SCR_CONTROL: 267 /* set the DET field */ 268 v |= ((val & 0x4) >> 1) | (val & 0x1); 269 270 /* set the IPM field */ 271 v |= ((val >> 8) & 0x3) << 2; 272 273 pci_write_config_byte(pdev, 0xA4 + slot, v); 274 return 0; 275 276 default: 277 return -EINVAL; 278 } 279 } 280 281 /** 282 * svia_tf_load - send taskfile registers to host controller 283 * @ap: Port to which output is sent 284 * @tf: ATA taskfile register set 285 * 286 * Outputs ATA taskfile to standard ATA host controller. 287 * 288 * This is to fix the internal bug of via chipsets, which will 289 * reset the device register after changing the IEN bit on ctl 290 * register. 291 */ 292 static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) 293 { 294 struct ata_taskfile ttf; 295 296 if (tf->ctl != ap->last_ctl) { 297 ttf = *tf; 298 ttf.flags |= ATA_TFLAG_DEVICE; 299 tf = &ttf; 300 } 301 ata_sff_tf_load(ap, tf); 302 } 303 304 static void svia_noop_freeze(struct ata_port *ap) 305 { 306 /* Some VIA controllers choke if ATA_NIEN is manipulated in 307 * certain way. Leave it alone and just clear pending IRQ. 308 */ 309 ap->ops->sff_check_status(ap); 310 ata_bmdma_irq_clear(ap); 311 } 312 313 /** 314 * vt6420_prereset - prereset for vt6420 315 * @link: target ATA link 316 * @deadline: deadline jiffies for the operation 317 * 318 * SCR registers on vt6420 are pieces of shit and may hang the 319 * whole machine completely if accessed with the wrong timing. 320 * To avoid such catastrophe, vt6420 doesn't provide generic SCR 321 * access operations, but uses SStatus and SControl only during 322 * boot probing in controlled way. 323 * 324 * As the old (pre EH update) probing code is proven to work, we 325 * strictly follow the access pattern. 326 * 327 * LOCKING: 328 * Kernel thread context (may sleep) 329 * 330 * RETURNS: 331 * 0 on success, -errno otherwise. 332 */ 333 static int vt6420_prereset(struct ata_link *link, unsigned long deadline) 334 { 335 struct ata_port *ap = link->ap; 336 struct ata_eh_context *ehc = &ap->link.eh_context; 337 unsigned long timeout = jiffies + (HZ * 5); 338 u32 sstatus, scontrol; 339 int online; 340 341 /* don't do any SCR stuff if we're not loading */ 342 if (!(ap->pflags & ATA_PFLAG_LOADING)) 343 goto skip_scr; 344 345 /* Resume phy. This is the old SATA resume sequence */ 346 svia_scr_write(link, SCR_CONTROL, 0x300); 347 svia_scr_read(link, SCR_CONTROL, &scontrol); /* flush */ 348 349 /* wait for phy to become ready, if necessary */ 350 do { 351 ata_msleep(link->ap, 200); 352 svia_scr_read(link, SCR_STATUS, &sstatus); 353 if ((sstatus & 0xf) != 1) 354 break; 355 } while (time_before(jiffies, timeout)); 356 357 /* open code sata_print_link_status() */ 358 svia_scr_read(link, SCR_STATUS, &sstatus); 359 svia_scr_read(link, SCR_CONTROL, &scontrol); 360 361 online = (sstatus & 0xf) == 0x3; 362 363 ata_port_printk(ap, KERN_INFO, 364 "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n", 365 online ? "up" : "down", sstatus, scontrol); 366 367 /* SStatus is read one more time */ 368 svia_scr_read(link, SCR_STATUS, &sstatus); 369 370 if (!online) { 371 /* tell EH to bail */ 372 ehc->i.action &= ~ATA_EH_RESET; 373 return 0; 374 } 375 376 skip_scr: 377 /* wait for !BSY */ 378 ata_sff_wait_ready(link, deadline); 379 380 return 0; 381 } 382 383 static void vt6420_bmdma_start(struct ata_queued_cmd *qc) 384 { 385 struct ata_port *ap = qc->ap; 386 if ((qc->tf.command == ATA_CMD_PACKET) && 387 (qc->scsicmd->sc_data_direction == DMA_TO_DEVICE)) { 388 /* Prevents corruption on some ATAPI burners */ 389 ata_sff_pause(ap); 390 } 391 ata_bmdma_start(qc); 392 } 393 394 static int vt6421_pata_cable_detect(struct ata_port *ap) 395 { 396 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 397 u8 tmp; 398 399 pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp); 400 if (tmp & 0x10) 401 return ATA_CBL_PATA40; 402 return ATA_CBL_PATA80; 403 } 404 405 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev) 406 { 407 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 408 static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 }; 409 pci_write_config_byte(pdev, PATA_PIO_TIMING - adev->devno, 410 pio_bits[adev->pio_mode - XFER_PIO_0]); 411 } 412 413 static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) 414 { 415 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 416 static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; 417 pci_write_config_byte(pdev, PATA_UDMA_TIMING - adev->devno, 418 udma_bits[adev->dma_mode - XFER_UDMA_0]); 419 } 420 421 static const unsigned int svia_bar_sizes[] = { 422 8, 4, 8, 4, 16, 256 423 }; 424 425 static const unsigned int vt6421_bar_sizes[] = { 426 16, 16, 16, 16, 32, 128 427 }; 428 429 static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port) 430 { 431 return addr + (port * 128); 432 } 433 434 static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port) 435 { 436 return addr + (port * 64); 437 } 438 439 static void vt6421_init_addrs(struct ata_port *ap) 440 { 441 void __iomem * const * iomap = ap->host->iomap; 442 void __iomem *reg_addr = iomap[ap->port_no]; 443 void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8); 444 struct ata_ioports *ioaddr = &ap->ioaddr; 445 446 ioaddr->cmd_addr = reg_addr; 447 ioaddr->altstatus_addr = 448 ioaddr->ctl_addr = (void __iomem *) 449 ((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS); 450 ioaddr->bmdma_addr = bmdma_addr; 451 ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no); 452 453 ata_sff_std_ports(ioaddr); 454 455 ata_port_pbar_desc(ap, ap->port_no, -1, "port"); 456 ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma"); 457 } 458 459 static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) 460 { 461 const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL }; 462 struct ata_host *host; 463 int rc; 464 465 rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); 466 if (rc) 467 return rc; 468 *r_host = host; 469 470 rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); 471 if (rc) { 472 dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); 473 return rc; 474 } 475 476 host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0); 477 host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1); 478 479 return 0; 480 } 481 482 static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) 483 { 484 const struct ata_port_info *ppi[] = 485 { &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info }; 486 struct ata_host *host; 487 int i, rc; 488 489 *r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi)); 490 if (!host) { 491 dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n"); 492 return -ENOMEM; 493 } 494 495 rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME); 496 if (rc) { 497 dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap " 498 "PCI BARs (errno=%d)\n", rc); 499 return rc; 500 } 501 host->iomap = pcim_iomap_table(pdev); 502 503 for (i = 0; i < host->n_ports; i++) 504 vt6421_init_addrs(host->ports[i]); 505 506 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); 507 if (rc) 508 return rc; 509 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); 510 if (rc) 511 return rc; 512 513 return 0; 514 } 515 516 static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) 517 { 518 const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL }; 519 struct ata_host *host; 520 int i, rc; 521 522 rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); 523 if (rc) 524 return rc; 525 *r_host = host; 526 527 rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); 528 if (rc) { 529 dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); 530 return rc; 531 } 532 533 /* 8251 hosts four sata ports as M/S of the two channels */ 534 for (i = 0; i < host->n_ports; i++) 535 ata_slave_link_init(host->ports[i]); 536 537 return 0; 538 } 539 540 static void svia_configure(struct pci_dev *pdev, int board_id) 541 { 542 u8 tmp8; 543 544 pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); 545 dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n", 546 (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); 547 548 /* make sure SATA channels are enabled */ 549 pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); 550 if ((tmp8 & ALL_PORTS) != ALL_PORTS) { 551 dev_printk(KERN_DEBUG, &pdev->dev, 552 "enabling SATA channels (0x%x)\n", 553 (int) tmp8); 554 tmp8 |= ALL_PORTS; 555 pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); 556 } 557 558 /* make sure interrupts for each channel sent to us */ 559 pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); 560 if ((tmp8 & ALL_PORTS) != ALL_PORTS) { 561 dev_printk(KERN_DEBUG, &pdev->dev, 562 "enabling SATA channel interrupts (0x%x)\n", 563 (int) tmp8); 564 tmp8 |= ALL_PORTS; 565 pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); 566 } 567 568 /* make sure native mode is enabled */ 569 pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); 570 if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { 571 dev_printk(KERN_DEBUG, &pdev->dev, 572 "enabling SATA channel native mode (0x%x)\n", 573 (int) tmp8); 574 tmp8 |= NATIVE_MODE_ALL; 575 pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); 576 } 577 578 /* 579 * vt6420/1 has problems talking to some drives. The following 580 * is the fix from Joseph Chan <JosephChan@via.com.tw>. 581 * 582 * When host issues HOLD, device may send up to 20DW of data 583 * before acknowledging it with HOLDA and the host should be 584 * able to buffer them in FIFO. Unfortunately, some WD drives 585 * send up to 40DW before acknowledging HOLD and, in the 586 * default configuration, this ends up overflowing vt6421's 587 * FIFO, making the controller abort the transaction with 588 * R_ERR. 589 * 590 * Rx52[2] is the internal 128DW FIFO Flow control watermark 591 * adjusting mechanism enable bit and the default value 0 592 * means host will issue HOLD to device when the left FIFO 593 * size goes below 32DW. Setting it to 1 makes the watermark 594 * 64DW. 595 * 596 * https://bugzilla.kernel.org/show_bug.cgi?id=15173 597 * http://article.gmane.org/gmane.linux.ide/46352 598 * http://thread.gmane.org/gmane.linux.kernel/1062139 599 */ 600 if (board_id == vt6420 || board_id == vt6421) { 601 pci_read_config_byte(pdev, 0x52, &tmp8); 602 tmp8 |= 1 << 2; 603 pci_write_config_byte(pdev, 0x52, tmp8); 604 } 605 } 606 607 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 608 { 609 static int printed_version; 610 unsigned int i; 611 int rc; 612 struct ata_host *host = NULL; 613 int board_id = (int) ent->driver_data; 614 const unsigned *bar_sizes; 615 616 if (!printed_version++) 617 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); 618 619 rc = pcim_enable_device(pdev); 620 if (rc) 621 return rc; 622 623 if (board_id == vt6421) 624 bar_sizes = &vt6421_bar_sizes[0]; 625 else 626 bar_sizes = &svia_bar_sizes[0]; 627 628 for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) 629 if ((pci_resource_start(pdev, i) == 0) || 630 (pci_resource_len(pdev, i) < bar_sizes[i])) { 631 dev_printk(KERN_ERR, &pdev->dev, 632 "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", 633 i, 634 (unsigned long long)pci_resource_start(pdev, i), 635 (unsigned long long)pci_resource_len(pdev, i)); 636 return -ENODEV; 637 } 638 639 switch (board_id) { 640 case vt6420: 641 rc = vt6420_prepare_host(pdev, &host); 642 break; 643 case vt6421: 644 rc = vt6421_prepare_host(pdev, &host); 645 break; 646 case vt8251: 647 rc = vt8251_prepare_host(pdev, &host); 648 break; 649 default: 650 rc = -EINVAL; 651 } 652 if (rc) 653 return rc; 654 655 svia_configure(pdev, board_id); 656 657 pci_set_master(pdev); 658 return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, 659 IRQF_SHARED, &svia_sht); 660 } 661 662 static int __init svia_init(void) 663 { 664 return pci_register_driver(&svia_pci_driver); 665 } 666 667 static void __exit svia_exit(void) 668 { 669 pci_unregister_driver(&svia_pci_driver); 670 } 671 672 module_init(svia_init); 673 module_exit(svia_exit); 674