1 /* 2 * sata_uli.c - ULi Electronics SATA 3 * 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2, or (at your option) 8 * any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; see the file COPYING. If not, write to 17 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 18 * 19 * 20 * libata documentation is available via 'make {ps|pdf}docs', 21 * as Documentation/DocBook/libata.* 22 * 23 * Hardware documentation available under NDA. 24 * 25 */ 26 27 #include <linux/kernel.h> 28 #include <linux/module.h> 29 #include <linux/pci.h> 30 #include <linux/init.h> 31 #include <linux/blkdev.h> 32 #include <linux/delay.h> 33 #include <linux/interrupt.h> 34 #include <linux/device.h> 35 #include <scsi/scsi_host.h> 36 #include <linux/libata.h> 37 38 #define DRV_NAME "sata_uli" 39 #define DRV_VERSION "1.3" 40 41 enum { 42 uli_5289 = 0, 43 uli_5287 = 1, 44 uli_5281 = 2, 45 46 uli_max_ports = 4, 47 48 /* PCI configuration registers */ 49 ULI5287_BASE = 0x90, /* sata0 phy SCR registers */ 50 ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */ 51 ULI5281_BASE = 0x60, /* sata0 phy SCR registers */ 52 ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */ 53 }; 54 55 struct uli_priv { 56 unsigned int scr_cfg_addr[uli_max_ports]; 57 }; 58 59 static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); 60 static int uli_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); 61 static int uli_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val); 62 63 static const struct pci_device_id uli_pci_tbl[] = { 64 { PCI_VDEVICE(AL, 0x5289), uli_5289 }, 65 { PCI_VDEVICE(AL, 0x5287), uli_5287 }, 66 { PCI_VDEVICE(AL, 0x5281), uli_5281 }, 67 68 { } /* terminate list */ 69 }; 70 71 static struct pci_driver uli_pci_driver = { 72 .name = DRV_NAME, 73 .id_table = uli_pci_tbl, 74 .probe = uli_init_one, 75 .remove = ata_pci_remove_one, 76 }; 77 78 static struct scsi_host_template uli_sht = { 79 .module = THIS_MODULE, 80 .name = DRV_NAME, 81 .ioctl = ata_scsi_ioctl, 82 .queuecommand = ata_scsi_queuecmd, 83 .can_queue = ATA_DEF_QUEUE, 84 .this_id = ATA_SHT_THIS_ID, 85 .sg_tablesize = LIBATA_MAX_PRD, 86 .cmd_per_lun = ATA_SHT_CMD_PER_LUN, 87 .emulated = ATA_SHT_EMULATED, 88 .use_clustering = ATA_SHT_USE_CLUSTERING, 89 .proc_name = DRV_NAME, 90 .dma_boundary = ATA_DMA_BOUNDARY, 91 .slave_configure = ata_scsi_slave_config, 92 .slave_destroy = ata_scsi_slave_destroy, 93 .bios_param = ata_std_bios_param, 94 }; 95 96 static const struct ata_port_operations uli_ops = { 97 .tf_load = ata_tf_load, 98 .tf_read = ata_tf_read, 99 .check_status = ata_check_status, 100 .exec_command = ata_exec_command, 101 .dev_select = ata_std_dev_select, 102 103 .bmdma_setup = ata_bmdma_setup, 104 .bmdma_start = ata_bmdma_start, 105 .bmdma_stop = ata_bmdma_stop, 106 .bmdma_status = ata_bmdma_status, 107 .qc_prep = ata_qc_prep, 108 .qc_issue = ata_qc_issue_prot, 109 .data_xfer = ata_data_xfer, 110 111 .freeze = ata_bmdma_freeze, 112 .thaw = ata_bmdma_thaw, 113 .error_handler = ata_bmdma_error_handler, 114 .post_internal_cmd = ata_bmdma_post_internal_cmd, 115 116 .irq_clear = ata_bmdma_irq_clear, 117 .irq_on = ata_irq_on, 118 119 .scr_read = uli_scr_read, 120 .scr_write = uli_scr_write, 121 122 .port_start = ata_port_start, 123 }; 124 125 static const struct ata_port_info uli_port_info = { 126 .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | 127 ATA_FLAG_IGN_SIMPLEX, 128 .pio_mask = 0x1f, /* pio0-4 */ 129 .udma_mask = ATA_UDMA6, 130 .port_ops = &uli_ops, 131 }; 132 133 134 MODULE_AUTHOR("Peer Chen"); 135 MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller"); 136 MODULE_LICENSE("GPL"); 137 MODULE_DEVICE_TABLE(pci, uli_pci_tbl); 138 MODULE_VERSION(DRV_VERSION); 139 140 static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) 141 { 142 struct uli_priv *hpriv = ap->host->private_data; 143 return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); 144 } 145 146 static u32 uli_scr_cfg_read(struct ata_port *ap, unsigned int sc_reg) 147 { 148 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 149 unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg); 150 u32 val; 151 152 pci_read_config_dword(pdev, cfg_addr, &val); 153 return val; 154 } 155 156 static void uli_scr_cfg_write(struct ata_port *ap, unsigned int scr, u32 val) 157 { 158 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 159 unsigned int cfg_addr = get_scr_cfg_addr(ap, scr); 160 161 pci_write_config_dword(pdev, cfg_addr, val); 162 } 163 164 static int uli_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) 165 { 166 if (sc_reg > SCR_CONTROL) 167 return -EINVAL; 168 169 *val = uli_scr_cfg_read(ap, sc_reg); 170 return 0; 171 } 172 173 static int uli_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val) 174 { 175 if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0 176 return -EINVAL; 177 178 uli_scr_cfg_write(ap, sc_reg, val); 179 return 0; 180 } 181 182 static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 183 { 184 static int printed_version; 185 const struct ata_port_info *ppi[] = { &uli_port_info, NULL }; 186 unsigned int board_idx = (unsigned int) ent->driver_data; 187 struct ata_host *host; 188 struct uli_priv *hpriv; 189 void __iomem * const *iomap; 190 struct ata_ioports *ioaddr; 191 int n_ports, rc; 192 193 if (!printed_version++) 194 dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); 195 196 rc = pcim_enable_device(pdev); 197 if (rc) 198 return rc; 199 200 n_ports = 2; 201 if (board_idx == uli_5287) 202 n_ports = 4; 203 204 /* allocate the host */ 205 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); 206 if (!host) 207 return -ENOMEM; 208 209 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); 210 if (!hpriv) 211 return -ENOMEM; 212 host->private_data = hpriv; 213 214 /* the first two ports are standard SFF */ 215 rc = ata_pci_init_sff_host(host); 216 if (rc) 217 return rc; 218 219 rc = ata_pci_init_bmdma(host); 220 if (rc) 221 return rc; 222 223 iomap = host->iomap; 224 225 switch (board_idx) { 226 case uli_5287: 227 /* If there are four, the last two live right after 228 * the standard SFF ports. 229 */ 230 hpriv->scr_cfg_addr[0] = ULI5287_BASE; 231 hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; 232 233 ioaddr = &host->ports[2]->ioaddr; 234 ioaddr->cmd_addr = iomap[0] + 8; 235 ioaddr->altstatus_addr = 236 ioaddr->ctl_addr = (void __iomem *) 237 ((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4; 238 ioaddr->bmdma_addr = iomap[4] + 16; 239 hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; 240 ata_std_ports(ioaddr); 241 242 ata_port_desc(host->ports[2], 243 "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", 244 (unsigned long long)pci_resource_start(pdev, 0) + 8, 245 ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4, 246 (unsigned long long)pci_resource_start(pdev, 4) + 16); 247 248 ioaddr = &host->ports[3]->ioaddr; 249 ioaddr->cmd_addr = iomap[2] + 8; 250 ioaddr->altstatus_addr = 251 ioaddr->ctl_addr = (void __iomem *) 252 ((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4; 253 ioaddr->bmdma_addr = iomap[4] + 24; 254 hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; 255 ata_std_ports(ioaddr); 256 257 ata_port_desc(host->ports[2], 258 "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", 259 (unsigned long long)pci_resource_start(pdev, 2) + 9, 260 ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4, 261 (unsigned long long)pci_resource_start(pdev, 4) + 24); 262 263 break; 264 265 case uli_5289: 266 hpriv->scr_cfg_addr[0] = ULI5287_BASE; 267 hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; 268 break; 269 270 case uli_5281: 271 hpriv->scr_cfg_addr[0] = ULI5281_BASE; 272 hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS; 273 break; 274 275 default: 276 BUG(); 277 break; 278 } 279 280 pci_set_master(pdev); 281 pci_intx(pdev, 1); 282 return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, 283 &uli_sht); 284 } 285 286 static int __init uli_init(void) 287 { 288 return pci_register_driver(&uli_pci_driver); 289 } 290 291 static void __exit uli_exit(void) 292 { 293 pci_unregister_driver(&uli_pci_driver); 294 } 295 296 297 module_init(uli_init); 298 module_exit(uli_exit); 299