1 /* 2 * sata_svw.c - ServerWorks / Apple K2 SATA 3 * 4 * Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and 5 * Jeff Garzik <jgarzik@pobox.com> 6 * Please ALWAYS copy linux-ide@vger.kernel.org 7 * on emails. 8 * 9 * Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> 10 * 11 * Bits from Jeff Garzik, Copyright RedHat, Inc. 12 * 13 * This driver probably works with non-Apple versions of the 14 * Broadcom chipset... 15 * 16 * 17 * This program is free software; you can redistribute it and/or modify 18 * it under the terms of the GNU General Public License as published by 19 * the Free Software Foundation; either version 2, or (at your option) 20 * any later version. 21 * 22 * This program is distributed in the hope that it will be useful, 23 * but WITHOUT ANY WARRANTY; without even the implied warranty of 24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 25 * GNU General Public License for more details. 26 * 27 * You should have received a copy of the GNU General Public License 28 * along with this program; see the file COPYING. If not, write to 29 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 30 * 31 * 32 * libata documentation is available via 'make {ps|pdf}docs', 33 * as Documentation/DocBook/libata.* 34 * 35 * Hardware documentation available under NDA. 36 * 37 */ 38 39 #include <linux/kernel.h> 40 #include <linux/module.h> 41 #include <linux/pci.h> 42 #include <linux/init.h> 43 #include <linux/blkdev.h> 44 #include <linux/delay.h> 45 #include <linux/interrupt.h> 46 #include <linux/device.h> 47 #include <scsi/scsi_host.h> 48 #include <scsi/scsi_cmnd.h> 49 #include <scsi/scsi.h> 50 #include <linux/libata.h> 51 52 #ifdef CONFIG_PPC_OF 53 #include <asm/prom.h> 54 #include <asm/pci-bridge.h> 55 #endif /* CONFIG_PPC_OF */ 56 57 #define DRV_NAME "sata_svw" 58 #define DRV_VERSION "2.3" 59 60 enum { 61 /* ap->flags bits */ 62 K2_FLAG_SATA_8_PORTS = (1 << 24), 63 K2_FLAG_NO_ATAPI_DMA = (1 << 25), 64 K2_FLAG_BAR_POS_3 = (1 << 26), 65 66 /* Taskfile registers offsets */ 67 K2_SATA_TF_CMD_OFFSET = 0x00, 68 K2_SATA_TF_DATA_OFFSET = 0x00, 69 K2_SATA_TF_ERROR_OFFSET = 0x04, 70 K2_SATA_TF_NSECT_OFFSET = 0x08, 71 K2_SATA_TF_LBAL_OFFSET = 0x0c, 72 K2_SATA_TF_LBAM_OFFSET = 0x10, 73 K2_SATA_TF_LBAH_OFFSET = 0x14, 74 K2_SATA_TF_DEVICE_OFFSET = 0x18, 75 K2_SATA_TF_CMDSTAT_OFFSET = 0x1c, 76 K2_SATA_TF_CTL_OFFSET = 0x20, 77 78 /* DMA base */ 79 K2_SATA_DMA_CMD_OFFSET = 0x30, 80 81 /* SCRs base */ 82 K2_SATA_SCR_STATUS_OFFSET = 0x40, 83 K2_SATA_SCR_ERROR_OFFSET = 0x44, 84 K2_SATA_SCR_CONTROL_OFFSET = 0x48, 85 86 /* Others */ 87 K2_SATA_SICR1_OFFSET = 0x80, 88 K2_SATA_SICR2_OFFSET = 0x84, 89 K2_SATA_SIM_OFFSET = 0x88, 90 91 /* Port stride */ 92 K2_SATA_PORT_OFFSET = 0x100, 93 94 chip_svw4 = 0, 95 chip_svw8 = 1, 96 chip_svw42 = 2, /* bar 3 */ 97 chip_svw43 = 3, /* bar 5 */ 98 }; 99 100 static u8 k2_stat_check_status(struct ata_port *ap); 101 102 103 static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc) 104 { 105 u8 cmnd = qc->scsicmd->cmnd[0]; 106 107 if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA) 108 return -1; /* ATAPI DMA not supported */ 109 else { 110 switch (cmnd) { 111 case READ_10: 112 case READ_12: 113 case READ_16: 114 case WRITE_10: 115 case WRITE_12: 116 case WRITE_16: 117 return 0; 118 119 default: 120 return -1; 121 } 122 123 } 124 } 125 126 static int k2_sata_scr_read(struct ata_link *link, 127 unsigned int sc_reg, u32 *val) 128 { 129 if (sc_reg > SCR_CONTROL) 130 return -EINVAL; 131 *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4)); 132 return 0; 133 } 134 135 136 static int k2_sata_scr_write(struct ata_link *link, 137 unsigned int sc_reg, u32 val) 138 { 139 if (sc_reg > SCR_CONTROL) 140 return -EINVAL; 141 writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); 142 return 0; 143 } 144 145 146 static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) 147 { 148 struct ata_ioports *ioaddr = &ap->ioaddr; 149 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; 150 151 if (tf->ctl != ap->last_ctl) { 152 writeb(tf->ctl, ioaddr->ctl_addr); 153 ap->last_ctl = tf->ctl; 154 ata_wait_idle(ap); 155 } 156 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { 157 writew(tf->feature | (((u16)tf->hob_feature) << 8), 158 ioaddr->feature_addr); 159 writew(tf->nsect | (((u16)tf->hob_nsect) << 8), 160 ioaddr->nsect_addr); 161 writew(tf->lbal | (((u16)tf->hob_lbal) << 8), 162 ioaddr->lbal_addr); 163 writew(tf->lbam | (((u16)tf->hob_lbam) << 8), 164 ioaddr->lbam_addr); 165 writew(tf->lbah | (((u16)tf->hob_lbah) << 8), 166 ioaddr->lbah_addr); 167 } else if (is_addr) { 168 writew(tf->feature, ioaddr->feature_addr); 169 writew(tf->nsect, ioaddr->nsect_addr); 170 writew(tf->lbal, ioaddr->lbal_addr); 171 writew(tf->lbam, ioaddr->lbam_addr); 172 writew(tf->lbah, ioaddr->lbah_addr); 173 } 174 175 if (tf->flags & ATA_TFLAG_DEVICE) 176 writeb(tf->device, ioaddr->device_addr); 177 178 ata_wait_idle(ap); 179 } 180 181 182 static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) 183 { 184 struct ata_ioports *ioaddr = &ap->ioaddr; 185 u16 nsect, lbal, lbam, lbah, feature; 186 187 tf->command = k2_stat_check_status(ap); 188 tf->device = readw(ioaddr->device_addr); 189 feature = readw(ioaddr->error_addr); 190 nsect = readw(ioaddr->nsect_addr); 191 lbal = readw(ioaddr->lbal_addr); 192 lbam = readw(ioaddr->lbam_addr); 193 lbah = readw(ioaddr->lbah_addr); 194 195 tf->feature = feature; 196 tf->nsect = nsect; 197 tf->lbal = lbal; 198 tf->lbam = lbam; 199 tf->lbah = lbah; 200 201 if (tf->flags & ATA_TFLAG_LBA48) { 202 tf->hob_feature = feature >> 8; 203 tf->hob_nsect = nsect >> 8; 204 tf->hob_lbal = lbal >> 8; 205 tf->hob_lbam = lbam >> 8; 206 tf->hob_lbah = lbah >> 8; 207 } 208 } 209 210 /** 211 * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO) 212 * @qc: Info associated with this ATA transaction. 213 * 214 * LOCKING: 215 * spin_lock_irqsave(host lock) 216 */ 217 218 static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc) 219 { 220 struct ata_port *ap = qc->ap; 221 unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); 222 u8 dmactl; 223 void __iomem *mmio = ap->ioaddr.bmdma_addr; 224 225 /* load PRD table addr. */ 226 mb(); /* make sure PRD table writes are visible to controller */ 227 writel(ap->bmdma_prd_dma, mmio + ATA_DMA_TABLE_OFS); 228 229 /* specify data direction, triple-check start bit is clear */ 230 dmactl = readb(mmio + ATA_DMA_CMD); 231 dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); 232 if (!rw) 233 dmactl |= ATA_DMA_WR; 234 writeb(dmactl, mmio + ATA_DMA_CMD); 235 236 /* issue r/w command if this is not a ATA DMA command*/ 237 if (qc->tf.protocol != ATA_PROT_DMA) 238 ap->ops->sff_exec_command(ap, &qc->tf); 239 } 240 241 /** 242 * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO) 243 * @qc: Info associated with this ATA transaction. 244 * 245 * LOCKING: 246 * spin_lock_irqsave(host lock) 247 */ 248 249 static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc) 250 { 251 struct ata_port *ap = qc->ap; 252 void __iomem *mmio = ap->ioaddr.bmdma_addr; 253 u8 dmactl; 254 255 /* start host DMA transaction */ 256 dmactl = readb(mmio + ATA_DMA_CMD); 257 writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); 258 /* This works around possible data corruption. 259 260 On certain SATA controllers that can be seen when the r/w 261 command is given to the controller before the host DMA is 262 started. 263 264 On a Read command, the controller would initiate the 265 command to the drive even before it sees the DMA 266 start. When there are very fast drives connected to the 267 controller, or when the data request hits in the drive 268 cache, there is the possibility that the drive returns a 269 part or all of the requested data to the controller before 270 the DMA start is issued. In this case, the controller 271 would become confused as to what to do with the data. In 272 the worst case when all the data is returned back to the 273 controller, the controller could hang. In other cases it 274 could return partial data returning in data 275 corruption. This problem has been seen in PPC systems and 276 can also appear on an system with very fast disks, where 277 the SATA controller is sitting behind a number of bridges, 278 and hence there is significant latency between the r/w 279 command and the start command. */ 280 /* issue r/w command if the access is to ATA */ 281 if (qc->tf.protocol == ATA_PROT_DMA) 282 ap->ops->sff_exec_command(ap, &qc->tf); 283 } 284 285 286 static u8 k2_stat_check_status(struct ata_port *ap) 287 { 288 return readl(ap->ioaddr.status_addr); 289 } 290 291 #ifdef CONFIG_PPC_OF 292 /* 293 * k2_sata_proc_info 294 * inout : decides on the direction of the dataflow and the meaning of the 295 * variables 296 * buffer: If inout==FALSE data is being written to it else read from it 297 * *start: If inout==FALSE start of the valid data in the buffer 298 * offset: If inout==FALSE offset from the beginning of the imaginary file 299 * from which we start writing into the buffer 300 * length: If inout==FALSE max number of bytes to be written into the buffer 301 * else number of bytes in the buffer 302 */ 303 static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, 304 off_t offset, int count, int inout) 305 { 306 struct ata_port *ap; 307 struct device_node *np; 308 int len, index; 309 310 /* Find the ata_port */ 311 ap = ata_shost_to_port(shost); 312 if (ap == NULL) 313 return 0; 314 315 /* Find the OF node for the PCI device proper */ 316 np = pci_device_to_OF_node(to_pci_dev(ap->host->dev)); 317 if (np == NULL) 318 return 0; 319 320 /* Match it to a port node */ 321 index = (ap == ap->host->ports[0]) ? 0 : 1; 322 for (np = np->child; np != NULL; np = np->sibling) { 323 const u32 *reg = of_get_property(np, "reg", NULL); 324 if (!reg) 325 continue; 326 if (index == *reg) 327 break; 328 } 329 if (np == NULL) 330 return 0; 331 332 len = sprintf(page, "devspec: %s\n", np->full_name); 333 334 return len; 335 } 336 #endif /* CONFIG_PPC_OF */ 337 338 339 static struct scsi_host_template k2_sata_sht = { 340 ATA_BMDMA_SHT(DRV_NAME), 341 #ifdef CONFIG_PPC_OF 342 .proc_info = k2_sata_proc_info, 343 #endif 344 }; 345 346 347 static struct ata_port_operations k2_sata_ops = { 348 .inherits = &ata_bmdma_port_ops, 349 .sff_tf_load = k2_sata_tf_load, 350 .sff_tf_read = k2_sata_tf_read, 351 .sff_check_status = k2_stat_check_status, 352 .check_atapi_dma = k2_sata_check_atapi_dma, 353 .bmdma_setup = k2_bmdma_setup_mmio, 354 .bmdma_start = k2_bmdma_start_mmio, 355 .scr_read = k2_sata_scr_read, 356 .scr_write = k2_sata_scr_write, 357 }; 358 359 static const struct ata_port_info k2_port_info[] = { 360 /* chip_svw4 */ 361 { 362 .flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA, 363 .pio_mask = ATA_PIO4, 364 .mwdma_mask = ATA_MWDMA2, 365 .udma_mask = ATA_UDMA6, 366 .port_ops = &k2_sata_ops, 367 }, 368 /* chip_svw8 */ 369 { 370 .flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA | 371 K2_FLAG_SATA_8_PORTS, 372 .pio_mask = ATA_PIO4, 373 .mwdma_mask = ATA_MWDMA2, 374 .udma_mask = ATA_UDMA6, 375 .port_ops = &k2_sata_ops, 376 }, 377 /* chip_svw42 */ 378 { 379 .flags = ATA_FLAG_SATA | K2_FLAG_BAR_POS_3, 380 .pio_mask = ATA_PIO4, 381 .mwdma_mask = ATA_MWDMA2, 382 .udma_mask = ATA_UDMA6, 383 .port_ops = &k2_sata_ops, 384 }, 385 /* chip_svw43 */ 386 { 387 .flags = ATA_FLAG_SATA, 388 .pio_mask = ATA_PIO4, 389 .mwdma_mask = ATA_MWDMA2, 390 .udma_mask = ATA_UDMA6, 391 .port_ops = &k2_sata_ops, 392 }, 393 }; 394 395 static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) 396 { 397 port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; 398 port->data_addr = base + K2_SATA_TF_DATA_OFFSET; 399 port->feature_addr = 400 port->error_addr = base + K2_SATA_TF_ERROR_OFFSET; 401 port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET; 402 port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET; 403 port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET; 404 port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET; 405 port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET; 406 port->command_addr = 407 port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET; 408 port->altstatus_addr = 409 port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET; 410 port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET; 411 port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET; 412 } 413 414 415 static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 416 { 417 const struct ata_port_info *ppi[] = 418 { &k2_port_info[ent->driver_data], NULL }; 419 struct ata_host *host; 420 void __iomem *mmio_base; 421 int n_ports, i, rc, bar_pos; 422 423 ata_print_version_once(&pdev->dev, DRV_VERSION); 424 425 /* allocate host */ 426 n_ports = 4; 427 if (ppi[0]->flags & K2_FLAG_SATA_8_PORTS) 428 n_ports = 8; 429 430 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); 431 if (!host) 432 return -ENOMEM; 433 434 bar_pos = 5; 435 if (ppi[0]->flags & K2_FLAG_BAR_POS_3) 436 bar_pos = 3; 437 /* 438 * If this driver happens to only be useful on Apple's K2, then 439 * we should check that here as it has a normal Serverworks ID 440 */ 441 rc = pcim_enable_device(pdev); 442 if (rc) 443 return rc; 444 445 /* 446 * Check if we have resources mapped at all (second function may 447 * have been disabled by firmware) 448 */ 449 if (pci_resource_len(pdev, bar_pos) == 0) { 450 /* In IDE mode we need to pin the device to ensure that 451 pcim_release does not clear the busmaster bit in config 452 space, clearing causes busmaster DMA to fail on 453 ports 3 & 4 */ 454 pcim_pin_device(pdev); 455 return -ENODEV; 456 } 457 458 /* Request and iomap PCI regions */ 459 rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME); 460 if (rc == -EBUSY) 461 pcim_pin_device(pdev); 462 if (rc) 463 return rc; 464 host->iomap = pcim_iomap_table(pdev); 465 mmio_base = host->iomap[bar_pos]; 466 467 /* different controllers have different number of ports - currently 4 or 8 */ 468 /* All ports are on the same function. Multi-function device is no 469 * longer available. This should not be seen in any system. */ 470 for (i = 0; i < host->n_ports; i++) { 471 struct ata_port *ap = host->ports[i]; 472 unsigned int offset = i * K2_SATA_PORT_OFFSET; 473 474 k2_sata_setup_port(&ap->ioaddr, mmio_base + offset); 475 476 ata_port_pbar_desc(ap, 5, -1, "mmio"); 477 ata_port_pbar_desc(ap, 5, offset, "port"); 478 } 479 480 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); 481 if (rc) 482 return rc; 483 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); 484 if (rc) 485 return rc; 486 487 /* Clear a magic bit in SCR1 according to Darwin, those help 488 * some funky seagate drives (though so far, those were already 489 * set by the firmware on the machines I had access to) 490 */ 491 writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, 492 mmio_base + K2_SATA_SICR1_OFFSET); 493 494 /* Clear SATA error & interrupts we don't use */ 495 writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); 496 writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); 497 498 pci_set_master(pdev); 499 return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, 500 IRQF_SHARED, &k2_sata_sht); 501 } 502 503 /* 0x240 is device ID for Apple K2 device 504 * 0x241 is device ID for Serverworks Frodo4 505 * 0x242 is device ID for Serverworks Frodo8 506 * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA 507 * controller 508 * */ 509 static const struct pci_device_id k2_sata_pci_tbl[] = { 510 { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, 511 { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 }, 512 { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 }, 513 { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, 514 { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, 515 { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, 516 { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 }, 517 518 { } 519 }; 520 521 static struct pci_driver k2_sata_pci_driver = { 522 .name = DRV_NAME, 523 .id_table = k2_sata_pci_tbl, 524 .probe = k2_sata_init_one, 525 .remove = ata_pci_remove_one, 526 }; 527 528 static int __init k2_sata_init(void) 529 { 530 return pci_register_driver(&k2_sata_pci_driver); 531 } 532 533 static void __exit k2_sata_exit(void) 534 { 535 pci_unregister_driver(&k2_sata_pci_driver); 536 } 537 538 MODULE_AUTHOR("Benjamin Herrenschmidt"); 539 MODULE_DESCRIPTION("low-level driver for K2 SATA controller"); 540 MODULE_LICENSE("GPL"); 541 MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl); 542 MODULE_VERSION(DRV_VERSION); 543 544 module_init(k2_sata_init); 545 module_exit(k2_sata_exit); 546