xref: /openbmc/linux/drivers/ata/sata_sil24.c (revision 96de2506)
1 /*
2  * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
3  *
4  * Copyright 2005  Tejun Heo
5  *
6  * Based on preview driver from Silicon Image.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of the GNU General Public License as published by the
10  * Free Software Foundation; either version 2, or (at your option) any
11  * later version.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  */
19 
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/gfp.h>
23 #include <linux/pci.h>
24 #include <linux/blkdev.h>
25 #include <linux/delay.h>
26 #include <linux/interrupt.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/device.h>
29 #include <scsi/scsi_host.h>
30 #include <scsi/scsi_cmnd.h>
31 #include <linux/libata.h>
32 
33 #define DRV_NAME	"sata_sil24"
34 #define DRV_VERSION	"1.1"
35 
36 /*
37  * Port request block (PRB) 32 bytes
38  */
39 struct sil24_prb {
40 	__le16	ctrl;
41 	__le16	prot;
42 	__le32	rx_cnt;
43 	u8	fis[6 * 4];
44 };
45 
46 /*
47  * Scatter gather entry (SGE) 16 bytes
48  */
49 struct sil24_sge {
50 	__le64	addr;
51 	__le32	cnt;
52 	__le32	flags;
53 };
54 
55 
56 enum {
57 	SIL24_HOST_BAR		= 0,
58 	SIL24_PORT_BAR		= 2,
59 
60 	/* sil24 fetches in chunks of 64bytes.  The first block
61 	 * contains the PRB and two SGEs.  From the second block, it's
62 	 * consisted of four SGEs and called SGT.  Calculate the
63 	 * number of SGTs that fit into one page.
64 	 */
65 	SIL24_PRB_SZ		= sizeof(struct sil24_prb)
66 				  + 2 * sizeof(struct sil24_sge),
67 	SIL24_MAX_SGT		= (PAGE_SIZE - SIL24_PRB_SZ)
68 				  / (4 * sizeof(struct sil24_sge)),
69 
70 	/* This will give us one unused SGEs for ATA.  This extra SGE
71 	 * will be used to store CDB for ATAPI devices.
72 	 */
73 	SIL24_MAX_SGE		= 4 * SIL24_MAX_SGT + 1,
74 
75 	/*
76 	 * Global controller registers (128 bytes @ BAR0)
77 	 */
78 		/* 32 bit regs */
79 	HOST_SLOT_STAT		= 0x00, /* 32 bit slot stat * 4 */
80 	HOST_CTRL		= 0x40,
81 	HOST_IRQ_STAT		= 0x44,
82 	HOST_PHY_CFG		= 0x48,
83 	HOST_BIST_CTRL		= 0x50,
84 	HOST_BIST_PTRN		= 0x54,
85 	HOST_BIST_STAT		= 0x58,
86 	HOST_MEM_BIST_STAT	= 0x5c,
87 	HOST_FLASH_CMD		= 0x70,
88 		/* 8 bit regs */
89 	HOST_FLASH_DATA		= 0x74,
90 	HOST_TRANSITION_DETECT	= 0x75,
91 	HOST_GPIO_CTRL		= 0x76,
92 	HOST_I2C_ADDR		= 0x78, /* 32 bit */
93 	HOST_I2C_DATA		= 0x7c,
94 	HOST_I2C_XFER_CNT	= 0x7e,
95 	HOST_I2C_CTRL		= 0x7f,
96 
97 	/* HOST_SLOT_STAT bits */
98 	HOST_SSTAT_ATTN		= (1 << 31),
99 
100 	/* HOST_CTRL bits */
101 	HOST_CTRL_M66EN		= (1 << 16), /* M66EN PCI bus signal */
102 	HOST_CTRL_TRDY		= (1 << 17), /* latched PCI TRDY */
103 	HOST_CTRL_STOP		= (1 << 18), /* latched PCI STOP */
104 	HOST_CTRL_DEVSEL	= (1 << 19), /* latched PCI DEVSEL */
105 	HOST_CTRL_REQ64		= (1 << 20), /* latched PCI REQ64 */
106 	HOST_CTRL_GLOBAL_RST	= (1 << 31), /* global reset */
107 
108 	/*
109 	 * Port registers
110 	 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
111 	 */
112 	PORT_REGS_SIZE		= 0x2000,
113 
114 	PORT_LRAM		= 0x0000, /* 31 LRAM slots and PMP regs */
115 	PORT_LRAM_SLOT_SZ	= 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
116 
117 	PORT_PMP		= 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
118 	PORT_PMP_STATUS		= 0x0000, /* port device status offset */
119 	PORT_PMP_QACTIVE	= 0x0004, /* port device QActive offset */
120 	PORT_PMP_SIZE		= 0x0008, /* 8 bytes per PMP */
121 
122 		/* 32 bit regs */
123 	PORT_CTRL_STAT		= 0x1000, /* write: ctrl-set, read: stat */
124 	PORT_CTRL_CLR		= 0x1004, /* write: ctrl-clear */
125 	PORT_IRQ_STAT		= 0x1008, /* high: status, low: interrupt */
126 	PORT_IRQ_ENABLE_SET	= 0x1010, /* write: enable-set */
127 	PORT_IRQ_ENABLE_CLR	= 0x1014, /* write: enable-clear */
128 	PORT_ACTIVATE_UPPER_ADDR= 0x101c,
129 	PORT_EXEC_FIFO		= 0x1020, /* command execution fifo */
130 	PORT_CMD_ERR		= 0x1024, /* command error number */
131 	PORT_FIS_CFG		= 0x1028,
132 	PORT_FIFO_THRES		= 0x102c,
133 		/* 16 bit regs */
134 	PORT_DECODE_ERR_CNT	= 0x1040,
135 	PORT_DECODE_ERR_THRESH	= 0x1042,
136 	PORT_CRC_ERR_CNT	= 0x1044,
137 	PORT_CRC_ERR_THRESH	= 0x1046,
138 	PORT_HSHK_ERR_CNT	= 0x1048,
139 	PORT_HSHK_ERR_THRESH	= 0x104a,
140 		/* 32 bit regs */
141 	PORT_PHY_CFG		= 0x1050,
142 	PORT_SLOT_STAT		= 0x1800,
143 	PORT_CMD_ACTIVATE	= 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
144 	PORT_CONTEXT		= 0x1e04,
145 	PORT_EXEC_DIAG		= 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
146 	PORT_PSD_DIAG		= 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
147 	PORT_SCONTROL		= 0x1f00,
148 	PORT_SSTATUS		= 0x1f04,
149 	PORT_SERROR		= 0x1f08,
150 	PORT_SACTIVE		= 0x1f0c,
151 
152 	/* PORT_CTRL_STAT bits */
153 	PORT_CS_PORT_RST	= (1 << 0), /* port reset */
154 	PORT_CS_DEV_RST		= (1 << 1), /* device reset */
155 	PORT_CS_INIT		= (1 << 2), /* port initialize */
156 	PORT_CS_IRQ_WOC		= (1 << 3), /* interrupt write one to clear */
157 	PORT_CS_CDB16		= (1 << 5), /* 0=12b cdb, 1=16b cdb */
158 	PORT_CS_PMP_RESUME	= (1 << 6), /* PMP resume */
159 	PORT_CS_32BIT_ACTV	= (1 << 10), /* 32-bit activation */
160 	PORT_CS_PMP_EN		= (1 << 13), /* port multiplier enable */
161 	PORT_CS_RDY		= (1 << 31), /* port ready to accept commands */
162 
163 	/* PORT_IRQ_STAT/ENABLE_SET/CLR */
164 	/* bits[11:0] are masked */
165 	PORT_IRQ_COMPLETE	= (1 << 0), /* command(s) completed */
166 	PORT_IRQ_ERROR		= (1 << 1), /* command execution error */
167 	PORT_IRQ_PORTRDY_CHG	= (1 << 2), /* port ready change */
168 	PORT_IRQ_PWR_CHG	= (1 << 3), /* power management change */
169 	PORT_IRQ_PHYRDY_CHG	= (1 << 4), /* PHY ready change */
170 	PORT_IRQ_COMWAKE	= (1 << 5), /* COMWAKE received */
171 	PORT_IRQ_UNK_FIS	= (1 << 6), /* unknown FIS received */
172 	PORT_IRQ_DEV_XCHG	= (1 << 7), /* device exchanged */
173 	PORT_IRQ_8B10B		= (1 << 8), /* 8b/10b decode error threshold */
174 	PORT_IRQ_CRC		= (1 << 9), /* CRC error threshold */
175 	PORT_IRQ_HANDSHAKE	= (1 << 10), /* handshake error threshold */
176 	PORT_IRQ_SDB_NOTIFY	= (1 << 11), /* SDB notify received */
177 
178 	DEF_PORT_IRQ		= PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
179 				  PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
180 				  PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
181 
182 	/* bits[27:16] are unmasked (raw) */
183 	PORT_IRQ_RAW_SHIFT	= 16,
184 	PORT_IRQ_MASKED_MASK	= 0x7ff,
185 	PORT_IRQ_RAW_MASK	= (0x7ff << PORT_IRQ_RAW_SHIFT),
186 
187 	/* ENABLE_SET/CLR specific, intr steering - 2 bit field */
188 	PORT_IRQ_STEER_SHIFT	= 30,
189 	PORT_IRQ_STEER_MASK	= (3 << PORT_IRQ_STEER_SHIFT),
190 
191 	/* PORT_CMD_ERR constants */
192 	PORT_CERR_DEV		= 1, /* Error bit in D2H Register FIS */
193 	PORT_CERR_SDB		= 2, /* Error bit in SDB FIS */
194 	PORT_CERR_DATA		= 3, /* Error in data FIS not detected by dev */
195 	PORT_CERR_SEND		= 4, /* Initial cmd FIS transmission failure */
196 	PORT_CERR_INCONSISTENT	= 5, /* Protocol mismatch */
197 	PORT_CERR_DIRECTION	= 6, /* Data direction mismatch */
198 	PORT_CERR_UNDERRUN	= 7, /* Ran out of SGEs while writing */
199 	PORT_CERR_OVERRUN	= 8, /* Ran out of SGEs while reading */
200 	PORT_CERR_PKT_PROT	= 11, /* DIR invalid in 1st PIO setup of ATAPI */
201 	PORT_CERR_SGT_BOUNDARY	= 16, /* PLD ecode 00 - SGT not on qword boundary */
202 	PORT_CERR_SGT_TGTABRT	= 17, /* PLD ecode 01 - target abort */
203 	PORT_CERR_SGT_MSTABRT	= 18, /* PLD ecode 10 - master abort */
204 	PORT_CERR_SGT_PCIPERR	= 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
205 	PORT_CERR_CMD_BOUNDARY	= 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
206 	PORT_CERR_CMD_TGTABRT	= 25, /* ctrl[15:13] 010 - target abort */
207 	PORT_CERR_CMD_MSTABRT	= 26, /* ctrl[15:13] 100 - master abort */
208 	PORT_CERR_CMD_PCIPERR	= 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
209 	PORT_CERR_XFR_UNDEF	= 32, /* PSD ecode 00 - undefined */
210 	PORT_CERR_XFR_TGTABRT	= 33, /* PSD ecode 01 - target abort */
211 	PORT_CERR_XFR_MSTABRT	= 34, /* PSD ecode 10 - master abort */
212 	PORT_CERR_XFR_PCIPERR	= 35, /* PSD ecode 11 - PCI prity err during transfer */
213 	PORT_CERR_SENDSERVICE	= 36, /* FIS received while sending service */
214 
215 	/* bits of PRB control field */
216 	PRB_CTRL_PROTOCOL	= (1 << 0), /* override def. ATA protocol */
217 	PRB_CTRL_PACKET_READ	= (1 << 4), /* PACKET cmd read */
218 	PRB_CTRL_PACKET_WRITE	= (1 << 5), /* PACKET cmd write */
219 	PRB_CTRL_NIEN		= (1 << 6), /* Mask completion irq */
220 	PRB_CTRL_SRST		= (1 << 7), /* Soft reset request (ign BSY?) */
221 
222 	/* PRB protocol field */
223 	PRB_PROT_PACKET		= (1 << 0),
224 	PRB_PROT_TCQ		= (1 << 1),
225 	PRB_PROT_NCQ		= (1 << 2),
226 	PRB_PROT_READ		= (1 << 3),
227 	PRB_PROT_WRITE		= (1 << 4),
228 	PRB_PROT_TRANSPARENT	= (1 << 5),
229 
230 	/*
231 	 * Other constants
232 	 */
233 	SGE_TRM			= (1 << 31), /* Last SGE in chain */
234 	SGE_LNK			= (1 << 30), /* linked list
235 						Points to SGT, not SGE */
236 	SGE_DRD			= (1 << 29), /* discard data read (/dev/null)
237 						data address ignored */
238 
239 	SIL24_MAX_CMDS		= 31,
240 
241 	/* board id */
242 	BID_SIL3124		= 0,
243 	BID_SIL3132		= 1,
244 	BID_SIL3131		= 2,
245 
246 	/* host flags */
247 	SIL24_COMMON_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
248 				  ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
249 				  ATA_FLAG_AN | ATA_FLAG_PMP,
250 	SIL24_FLAG_PCIX_IRQ_WOC	= (1 << 24), /* IRQ loss errata on PCI-X */
251 
252 	IRQ_STAT_4PORTS		= 0xf,
253 };
254 
255 struct sil24_ata_block {
256 	struct sil24_prb prb;
257 	struct sil24_sge sge[SIL24_MAX_SGE];
258 };
259 
260 struct sil24_atapi_block {
261 	struct sil24_prb prb;
262 	u8 cdb[16];
263 	struct sil24_sge sge[SIL24_MAX_SGE];
264 };
265 
266 union sil24_cmd_block {
267 	struct sil24_ata_block ata;
268 	struct sil24_atapi_block atapi;
269 };
270 
271 static const struct sil24_cerr_info {
272 	unsigned int err_mask, action;
273 	const char *desc;
274 } sil24_cerr_db[] = {
275 	[0]			= { AC_ERR_DEV, 0,
276 				    "device error" },
277 	[PORT_CERR_DEV]		= { AC_ERR_DEV, 0,
278 				    "device error via D2H FIS" },
279 	[PORT_CERR_SDB]		= { AC_ERR_DEV, 0,
280 				    "device error via SDB FIS" },
281 	[PORT_CERR_DATA]	= { AC_ERR_ATA_BUS, ATA_EH_RESET,
282 				    "error in data FIS" },
283 	[PORT_CERR_SEND]	= { AC_ERR_ATA_BUS, ATA_EH_RESET,
284 				    "failed to transmit command FIS" },
285 	[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
286 				     "protocol mismatch" },
287 	[PORT_CERR_DIRECTION]	= { AC_ERR_HSM, ATA_EH_RESET,
288 				    "data direction mismatch" },
289 	[PORT_CERR_UNDERRUN]	= { AC_ERR_HSM, ATA_EH_RESET,
290 				    "ran out of SGEs while writing" },
291 	[PORT_CERR_OVERRUN]	= { AC_ERR_HSM, ATA_EH_RESET,
292 				    "ran out of SGEs while reading" },
293 	[PORT_CERR_PKT_PROT]	= { AC_ERR_HSM, ATA_EH_RESET,
294 				    "invalid data direction for ATAPI CDB" },
295 	[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
296 				     "SGT not on qword boundary" },
297 	[PORT_CERR_SGT_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
298 				    "PCI target abort while fetching SGT" },
299 	[PORT_CERR_SGT_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
300 				    "PCI master abort while fetching SGT" },
301 	[PORT_CERR_SGT_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
302 				    "PCI parity error while fetching SGT" },
303 	[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
304 				     "PRB not on qword boundary" },
305 	[PORT_CERR_CMD_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
306 				    "PCI target abort while fetching PRB" },
307 	[PORT_CERR_CMD_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
308 				    "PCI master abort while fetching PRB" },
309 	[PORT_CERR_CMD_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
310 				    "PCI parity error while fetching PRB" },
311 	[PORT_CERR_XFR_UNDEF]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
312 				    "undefined error while transferring data" },
313 	[PORT_CERR_XFR_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
314 				    "PCI target abort while transferring data" },
315 	[PORT_CERR_XFR_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
316 				    "PCI master abort while transferring data" },
317 	[PORT_CERR_XFR_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
318 				    "PCI parity error while transferring data" },
319 	[PORT_CERR_SENDSERVICE]	= { AC_ERR_HSM, ATA_EH_RESET,
320 				    "FIS received while sending service FIS" },
321 };
322 
323 /*
324  * ap->private_data
325  *
326  * The preview driver always returned 0 for status.  We emulate it
327  * here from the previous interrupt.
328  */
329 struct sil24_port_priv {
330 	union sil24_cmd_block *cmd_block;	/* 32 cmd blocks */
331 	dma_addr_t cmd_block_dma;		/* DMA base addr for them */
332 	int do_port_rst;
333 };
334 
335 static void sil24_dev_config(struct ata_device *dev);
336 static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val);
337 static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val);
338 static int sil24_qc_defer(struct ata_queued_cmd *qc);
339 static void sil24_qc_prep(struct ata_queued_cmd *qc);
340 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
341 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
342 static void sil24_pmp_attach(struct ata_port *ap);
343 static void sil24_pmp_detach(struct ata_port *ap);
344 static void sil24_freeze(struct ata_port *ap);
345 static void sil24_thaw(struct ata_port *ap);
346 static int sil24_softreset(struct ata_link *link, unsigned int *class,
347 			   unsigned long deadline);
348 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
349 			   unsigned long deadline);
350 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
351 			       unsigned long deadline);
352 static void sil24_error_handler(struct ata_port *ap);
353 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
354 static int sil24_port_start(struct ata_port *ap);
355 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
356 #ifdef CONFIG_PM_SLEEP
357 static int sil24_pci_device_resume(struct pci_dev *pdev);
358 #endif
359 #ifdef CONFIG_PM
360 static int sil24_port_resume(struct ata_port *ap);
361 #endif
362 
363 static const struct pci_device_id sil24_pci_tbl[] = {
364 	{ PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
365 	{ PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
366 	{ PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
367 	{ PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
368 	{ PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
369 	{ PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
370 	{ PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
371 
372 	{ } /* terminate list */
373 };
374 
375 static struct pci_driver sil24_pci_driver = {
376 	.name			= DRV_NAME,
377 	.id_table		= sil24_pci_tbl,
378 	.probe			= sil24_init_one,
379 	.remove			= ata_pci_remove_one,
380 #ifdef CONFIG_PM_SLEEP
381 	.suspend		= ata_pci_device_suspend,
382 	.resume			= sil24_pci_device_resume,
383 #endif
384 };
385 
386 static struct scsi_host_template sil24_sht = {
387 	ATA_NCQ_SHT(DRV_NAME),
388 	.can_queue		= SIL24_MAX_CMDS,
389 	.sg_tablesize		= SIL24_MAX_SGE,
390 	.dma_boundary		= ATA_DMA_BOUNDARY,
391 	.tag_alloc_policy	= BLK_TAG_ALLOC_FIFO,
392 };
393 
394 static struct ata_port_operations sil24_ops = {
395 	.inherits		= &sata_pmp_port_ops,
396 
397 	.qc_defer		= sil24_qc_defer,
398 	.qc_prep		= sil24_qc_prep,
399 	.qc_issue		= sil24_qc_issue,
400 	.qc_fill_rtf		= sil24_qc_fill_rtf,
401 
402 	.freeze			= sil24_freeze,
403 	.thaw			= sil24_thaw,
404 	.softreset		= sil24_softreset,
405 	.hardreset		= sil24_hardreset,
406 	.pmp_softreset		= sil24_softreset,
407 	.pmp_hardreset		= sil24_pmp_hardreset,
408 	.error_handler		= sil24_error_handler,
409 	.post_internal_cmd	= sil24_post_internal_cmd,
410 	.dev_config		= sil24_dev_config,
411 
412 	.scr_read		= sil24_scr_read,
413 	.scr_write		= sil24_scr_write,
414 	.pmp_attach		= sil24_pmp_attach,
415 	.pmp_detach		= sil24_pmp_detach,
416 
417 	.port_start		= sil24_port_start,
418 #ifdef CONFIG_PM
419 	.port_resume		= sil24_port_resume,
420 #endif
421 };
422 
423 static bool sata_sil24_msi;    /* Disable MSI */
424 module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
425 MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
426 
427 /*
428  * Use bits 30-31 of port_flags to encode available port numbers.
429  * Current maxium is 4.
430  */
431 #define SIL24_NPORTS2FLAG(nports)	((((unsigned)(nports) - 1) & 0x3) << 30)
432 #define SIL24_FLAG2NPORTS(flag)		((((flag) >> 30) & 0x3) + 1)
433 
434 static const struct ata_port_info sil24_port_info[] = {
435 	/* sil_3124 */
436 	{
437 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
438 				  SIL24_FLAG_PCIX_IRQ_WOC,
439 		.pio_mask	= ATA_PIO4,
440 		.mwdma_mask	= ATA_MWDMA2,
441 		.udma_mask	= ATA_UDMA5,
442 		.port_ops	= &sil24_ops,
443 	},
444 	/* sil_3132 */
445 	{
446 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
447 		.pio_mask	= ATA_PIO4,
448 		.mwdma_mask	= ATA_MWDMA2,
449 		.udma_mask	= ATA_UDMA5,
450 		.port_ops	= &sil24_ops,
451 	},
452 	/* sil_3131/sil_3531 */
453 	{
454 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
455 		.pio_mask	= ATA_PIO4,
456 		.mwdma_mask	= ATA_MWDMA2,
457 		.udma_mask	= ATA_UDMA5,
458 		.port_ops	= &sil24_ops,
459 	},
460 };
461 
462 static int sil24_tag(int tag)
463 {
464 	if (unlikely(ata_tag_internal(tag)))
465 		return 0;
466 	return tag;
467 }
468 
469 static unsigned long sil24_port_offset(struct ata_port *ap)
470 {
471 	return ap->port_no * PORT_REGS_SIZE;
472 }
473 
474 static void __iomem *sil24_port_base(struct ata_port *ap)
475 {
476 	return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
477 }
478 
479 static void sil24_dev_config(struct ata_device *dev)
480 {
481 	void __iomem *port = sil24_port_base(dev->link->ap);
482 
483 	if (dev->cdb_len == 16)
484 		writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
485 	else
486 		writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
487 }
488 
489 static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
490 {
491 	void __iomem *port = sil24_port_base(ap);
492 	struct sil24_prb __iomem *prb;
493 	u8 fis[6 * 4];
494 
495 	prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ;
496 	memcpy_fromio(fis, prb->fis, sizeof(fis));
497 	ata_tf_from_fis(fis, tf);
498 }
499 
500 static int sil24_scr_map[] = {
501 	[SCR_CONTROL]	= 0,
502 	[SCR_STATUS]	= 1,
503 	[SCR_ERROR]	= 2,
504 	[SCR_ACTIVE]	= 3,
505 };
506 
507 static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val)
508 {
509 	void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
510 
511 	if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
512 		*val = readl(scr_addr + sil24_scr_map[sc_reg] * 4);
513 		return 0;
514 	}
515 	return -EINVAL;
516 }
517 
518 static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val)
519 {
520 	void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
521 
522 	if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
523 		writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
524 		return 0;
525 	}
526 	return -EINVAL;
527 }
528 
529 static void sil24_config_port(struct ata_port *ap)
530 {
531 	void __iomem *port = sil24_port_base(ap);
532 
533 	/* configure IRQ WoC */
534 	if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
535 		writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
536 	else
537 		writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
538 
539 	/* zero error counters. */
540 	writew(0x8000, port + PORT_DECODE_ERR_THRESH);
541 	writew(0x8000, port + PORT_CRC_ERR_THRESH);
542 	writew(0x8000, port + PORT_HSHK_ERR_THRESH);
543 	writew(0x0000, port + PORT_DECODE_ERR_CNT);
544 	writew(0x0000, port + PORT_CRC_ERR_CNT);
545 	writew(0x0000, port + PORT_HSHK_ERR_CNT);
546 
547 	/* always use 64bit activation */
548 	writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
549 
550 	/* clear port multiplier enable and resume bits */
551 	writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
552 }
553 
554 static void sil24_config_pmp(struct ata_port *ap, int attached)
555 {
556 	void __iomem *port = sil24_port_base(ap);
557 
558 	if (attached)
559 		writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
560 	else
561 		writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR);
562 }
563 
564 static void sil24_clear_pmp(struct ata_port *ap)
565 {
566 	void __iomem *port = sil24_port_base(ap);
567 	int i;
568 
569 	writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
570 
571 	for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
572 		void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE;
573 
574 		writel(0, pmp_base + PORT_PMP_STATUS);
575 		writel(0, pmp_base + PORT_PMP_QACTIVE);
576 	}
577 }
578 
579 static int sil24_init_port(struct ata_port *ap)
580 {
581 	void __iomem *port = sil24_port_base(ap);
582 	struct sil24_port_priv *pp = ap->private_data;
583 	u32 tmp;
584 
585 	/* clear PMP error status */
586 	if (sata_pmp_attached(ap))
587 		sil24_clear_pmp(ap);
588 
589 	writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
590 	ata_wait_register(ap, port + PORT_CTRL_STAT,
591 			  PORT_CS_INIT, PORT_CS_INIT, 10, 100);
592 	tmp = ata_wait_register(ap, port + PORT_CTRL_STAT,
593 				PORT_CS_RDY, 0, 10, 100);
594 
595 	if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
596 		pp->do_port_rst = 1;
597 		ap->link.eh_context.i.action |= ATA_EH_RESET;
598 		return -EIO;
599 	}
600 
601 	return 0;
602 }
603 
604 static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
605 				 const struct ata_taskfile *tf,
606 				 int is_cmd, u32 ctrl,
607 				 unsigned long timeout_msec)
608 {
609 	void __iomem *port = sil24_port_base(ap);
610 	struct sil24_port_priv *pp = ap->private_data;
611 	struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
612 	dma_addr_t paddr = pp->cmd_block_dma;
613 	u32 irq_enabled, irq_mask, irq_stat;
614 	int rc;
615 
616 	prb->ctrl = cpu_to_le16(ctrl);
617 	ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
618 
619 	/* temporarily plug completion and error interrupts */
620 	irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
621 	writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
622 
623 	/*
624 	 * The barrier is required to ensure that writes to cmd_block reach
625 	 * the memory before the write to PORT_CMD_ACTIVATE.
626 	 */
627 	wmb();
628 	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
629 	writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
630 
631 	irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
632 	irq_stat = ata_wait_register(ap, port + PORT_IRQ_STAT, irq_mask, 0x0,
633 				     10, timeout_msec);
634 
635 	writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
636 	irq_stat >>= PORT_IRQ_RAW_SHIFT;
637 
638 	if (irq_stat & PORT_IRQ_COMPLETE)
639 		rc = 0;
640 	else {
641 		/* force port into known state */
642 		sil24_init_port(ap);
643 
644 		if (irq_stat & PORT_IRQ_ERROR)
645 			rc = -EIO;
646 		else
647 			rc = -EBUSY;
648 	}
649 
650 	/* restore IRQ enabled */
651 	writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
652 
653 	return rc;
654 }
655 
656 static int sil24_softreset(struct ata_link *link, unsigned int *class,
657 			   unsigned long deadline)
658 {
659 	struct ata_port *ap = link->ap;
660 	int pmp = sata_srst_pmp(link);
661 	unsigned long timeout_msec = 0;
662 	struct ata_taskfile tf;
663 	const char *reason;
664 	int rc;
665 
666 	DPRINTK("ENTER\n");
667 
668 	/* put the port into known state */
669 	if (sil24_init_port(ap)) {
670 		reason = "port not ready";
671 		goto err;
672 	}
673 
674 	/* do SRST */
675 	if (time_after(deadline, jiffies))
676 		timeout_msec = jiffies_to_msecs(deadline - jiffies);
677 
678 	ata_tf_init(link->device, &tf);	/* doesn't really matter */
679 	rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST,
680 				   timeout_msec);
681 	if (rc == -EBUSY) {
682 		reason = "timeout";
683 		goto err;
684 	} else if (rc) {
685 		reason = "SRST command error";
686 		goto err;
687 	}
688 
689 	sil24_read_tf(ap, 0, &tf);
690 	*class = ata_dev_classify(&tf);
691 
692 	DPRINTK("EXIT, class=%u\n", *class);
693 	return 0;
694 
695  err:
696 	ata_link_err(link, "softreset failed (%s)\n", reason);
697 	return -EIO;
698 }
699 
700 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
701 			   unsigned long deadline)
702 {
703 	struct ata_port *ap = link->ap;
704 	void __iomem *port = sil24_port_base(ap);
705 	struct sil24_port_priv *pp = ap->private_data;
706 	int did_port_rst = 0;
707 	const char *reason;
708 	int tout_msec, rc;
709 	u32 tmp;
710 
711  retry:
712 	/* Sometimes, DEV_RST is not enough to recover the controller.
713 	 * This happens often after PM DMA CS errata.
714 	 */
715 	if (pp->do_port_rst) {
716 		ata_port_warn(ap,
717 			      "controller in dubious state, performing PORT_RST\n");
718 
719 		writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
720 		ata_msleep(ap, 10);
721 		writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
722 		ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0,
723 				  10, 5000);
724 
725 		/* restore port configuration */
726 		sil24_config_port(ap);
727 		sil24_config_pmp(ap, ap->nr_pmp_links);
728 
729 		pp->do_port_rst = 0;
730 		did_port_rst = 1;
731 	}
732 
733 	/* sil24 does the right thing(tm) without any protection */
734 	sata_set_spd(link);
735 
736 	tout_msec = 100;
737 	if (ata_link_online(link))
738 		tout_msec = 5000;
739 
740 	writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
741 	tmp = ata_wait_register(ap, port + PORT_CTRL_STAT,
742 				PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
743 				tout_msec);
744 
745 	/* SStatus oscillates between zero and valid status after
746 	 * DEV_RST, debounce it.
747 	 */
748 	rc = sata_link_debounce(link, sata_deb_timing_long, deadline);
749 	if (rc) {
750 		reason = "PHY debouncing failed";
751 		goto err;
752 	}
753 
754 	if (tmp & PORT_CS_DEV_RST) {
755 		if (ata_link_offline(link))
756 			return 0;
757 		reason = "link not ready";
758 		goto err;
759 	}
760 
761 	/* Sil24 doesn't store signature FIS after hardreset, so we
762 	 * can't wait for BSY to clear.  Some devices take a long time
763 	 * to get ready and those devices will choke if we don't wait
764 	 * for BSY clearance here.  Tell libata to perform follow-up
765 	 * softreset.
766 	 */
767 	return -EAGAIN;
768 
769  err:
770 	if (!did_port_rst) {
771 		pp->do_port_rst = 1;
772 		goto retry;
773 	}
774 
775 	ata_link_err(link, "hardreset failed (%s)\n", reason);
776 	return -EIO;
777 }
778 
779 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
780 				 struct sil24_sge *sge)
781 {
782 	struct scatterlist *sg;
783 	struct sil24_sge *last_sge = NULL;
784 	unsigned int si;
785 
786 	for_each_sg(qc->sg, sg, qc->n_elem, si) {
787 		sge->addr = cpu_to_le64(sg_dma_address(sg));
788 		sge->cnt = cpu_to_le32(sg_dma_len(sg));
789 		sge->flags = 0;
790 
791 		last_sge = sge;
792 		sge++;
793 	}
794 
795 	last_sge->flags = cpu_to_le32(SGE_TRM);
796 }
797 
798 static int sil24_qc_defer(struct ata_queued_cmd *qc)
799 {
800 	struct ata_link *link = qc->dev->link;
801 	struct ata_port *ap = link->ap;
802 	u8 prot = qc->tf.protocol;
803 
804 	/*
805 	 * There is a bug in the chip:
806 	 * Port LRAM Causes the PRB/SGT Data to be Corrupted
807 	 * If the host issues a read request for LRAM and SActive registers
808 	 * while active commands are available in the port, PRB/SGT data in
809 	 * the LRAM can become corrupted. This issue applies only when
810 	 * reading from, but not writing to, the LRAM.
811 	 *
812 	 * Therefore, reading LRAM when there is no particular error [and
813 	 * other commands may be outstanding] is prohibited.
814 	 *
815 	 * To avoid this bug there are two situations where a command must run
816 	 * exclusive of any other commands on the port:
817 	 *
818 	 * - ATAPI commands which check the sense data
819 	 * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
820 	 *   set.
821 	 *
822  	 */
823 	int is_excl = (ata_is_atapi(prot) ||
824 		       (qc->flags & ATA_QCFLAG_RESULT_TF));
825 
826 	if (unlikely(ap->excl_link)) {
827 		if (link == ap->excl_link) {
828 			if (ap->nr_active_links)
829 				return ATA_DEFER_PORT;
830 			qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
831 		} else
832 			return ATA_DEFER_PORT;
833 	} else if (unlikely(is_excl)) {
834 		ap->excl_link = link;
835 		if (ap->nr_active_links)
836 			return ATA_DEFER_PORT;
837 		qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
838 	}
839 
840 	return ata_std_qc_defer(qc);
841 }
842 
843 static void sil24_qc_prep(struct ata_queued_cmd *qc)
844 {
845 	struct ata_port *ap = qc->ap;
846 	struct sil24_port_priv *pp = ap->private_data;
847 	union sil24_cmd_block *cb;
848 	struct sil24_prb *prb;
849 	struct sil24_sge *sge;
850 	u16 ctrl = 0;
851 
852 	cb = &pp->cmd_block[sil24_tag(qc->hw_tag)];
853 
854 	if (!ata_is_atapi(qc->tf.protocol)) {
855 		prb = &cb->ata.prb;
856 		sge = cb->ata.sge;
857 		if (ata_is_data(qc->tf.protocol)) {
858 			u16 prot = 0;
859 			ctrl = PRB_CTRL_PROTOCOL;
860 			if (ata_is_ncq(qc->tf.protocol))
861 				prot |= PRB_PROT_NCQ;
862 			if (qc->tf.flags & ATA_TFLAG_WRITE)
863 				prot |= PRB_PROT_WRITE;
864 			else
865 				prot |= PRB_PROT_READ;
866 			prb->prot = cpu_to_le16(prot);
867 		}
868 	} else {
869 		prb = &cb->atapi.prb;
870 		sge = cb->atapi.sge;
871 		memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb));
872 		memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
873 
874 		if (ata_is_data(qc->tf.protocol)) {
875 			if (qc->tf.flags & ATA_TFLAG_WRITE)
876 				ctrl = PRB_CTRL_PACKET_WRITE;
877 			else
878 				ctrl = PRB_CTRL_PACKET_READ;
879 		}
880 	}
881 
882 	prb->ctrl = cpu_to_le16(ctrl);
883 	ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis);
884 
885 	if (qc->flags & ATA_QCFLAG_DMAMAP)
886 		sil24_fill_sg(qc, sge);
887 }
888 
889 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
890 {
891 	struct ata_port *ap = qc->ap;
892 	struct sil24_port_priv *pp = ap->private_data;
893 	void __iomem *port = sil24_port_base(ap);
894 	unsigned int tag = sil24_tag(qc->hw_tag);
895 	dma_addr_t paddr;
896 	void __iomem *activate;
897 
898 	paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
899 	activate = port + PORT_CMD_ACTIVATE + tag * 8;
900 
901 	/*
902 	 * The barrier is required to ensure that writes to cmd_block reach
903 	 * the memory before the write to PORT_CMD_ACTIVATE.
904 	 */
905 	wmb();
906 	writel((u32)paddr, activate);
907 	writel((u64)paddr >> 32, activate + 4);
908 
909 	return 0;
910 }
911 
912 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
913 {
914 	sil24_read_tf(qc->ap, qc->hw_tag, &qc->result_tf);
915 	return true;
916 }
917 
918 static void sil24_pmp_attach(struct ata_port *ap)
919 {
920 	u32 *gscr = ap->link.device->gscr;
921 
922 	sil24_config_pmp(ap, 1);
923 	sil24_init_port(ap);
924 
925 	if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
926 	    sata_pmp_gscr_devid(gscr) == 0x4140) {
927 		ata_port_info(ap,
928 			"disabling NCQ support due to sil24-mv4140 quirk\n");
929 		ap->flags &= ~ATA_FLAG_NCQ;
930 	}
931 }
932 
933 static void sil24_pmp_detach(struct ata_port *ap)
934 {
935 	sil24_init_port(ap);
936 	sil24_config_pmp(ap, 0);
937 
938 	ap->flags |= ATA_FLAG_NCQ;
939 }
940 
941 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
942 			       unsigned long deadline)
943 {
944 	int rc;
945 
946 	rc = sil24_init_port(link->ap);
947 	if (rc) {
948 		ata_link_err(link, "hardreset failed (port not ready)\n");
949 		return rc;
950 	}
951 
952 	return sata_std_hardreset(link, class, deadline);
953 }
954 
955 static void sil24_freeze(struct ata_port *ap)
956 {
957 	void __iomem *port = sil24_port_base(ap);
958 
959 	/* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
960 	 * PORT_IRQ_ENABLE instead.
961 	 */
962 	writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
963 }
964 
965 static void sil24_thaw(struct ata_port *ap)
966 {
967 	void __iomem *port = sil24_port_base(ap);
968 	u32 tmp;
969 
970 	/* clear IRQ */
971 	tmp = readl(port + PORT_IRQ_STAT);
972 	writel(tmp, port + PORT_IRQ_STAT);
973 
974 	/* turn IRQ back on */
975 	writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
976 }
977 
978 static void sil24_error_intr(struct ata_port *ap)
979 {
980 	void __iomem *port = sil24_port_base(ap);
981 	struct sil24_port_priv *pp = ap->private_data;
982 	struct ata_queued_cmd *qc = NULL;
983 	struct ata_link *link;
984 	struct ata_eh_info *ehi;
985 	int abort = 0, freeze = 0;
986 	u32 irq_stat;
987 
988 	/* on error, we need to clear IRQ explicitly */
989 	irq_stat = readl(port + PORT_IRQ_STAT);
990 	writel(irq_stat, port + PORT_IRQ_STAT);
991 
992 	/* first, analyze and record host port events */
993 	link = &ap->link;
994 	ehi = &link->eh_info;
995 	ata_ehi_clear_desc(ehi);
996 
997 	ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
998 
999 	if (irq_stat & PORT_IRQ_SDB_NOTIFY) {
1000 		ata_ehi_push_desc(ehi, "SDB notify");
1001 		sata_async_notification(ap);
1002 	}
1003 
1004 	if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
1005 		ata_ehi_hotplugged(ehi);
1006 		ata_ehi_push_desc(ehi, "%s",
1007 				  irq_stat & PORT_IRQ_PHYRDY_CHG ?
1008 				  "PHY RDY changed" : "device exchanged");
1009 		freeze = 1;
1010 	}
1011 
1012 	if (irq_stat & PORT_IRQ_UNK_FIS) {
1013 		ehi->err_mask |= AC_ERR_HSM;
1014 		ehi->action |= ATA_EH_RESET;
1015 		ata_ehi_push_desc(ehi, "unknown FIS");
1016 		freeze = 1;
1017 	}
1018 
1019 	/* deal with command error */
1020 	if (irq_stat & PORT_IRQ_ERROR) {
1021 		const struct sil24_cerr_info *ci = NULL;
1022 		unsigned int err_mask = 0, action = 0;
1023 		u32 context, cerr;
1024 		int pmp;
1025 
1026 		abort = 1;
1027 
1028 		/* DMA Context Switch Failure in Port Multiplier Mode
1029 		 * errata.  If we have active commands to 3 or more
1030 		 * devices, any error condition on active devices can
1031 		 * corrupt DMA context switching.
1032 		 */
1033 		if (ap->nr_active_links >= 3) {
1034 			ehi->err_mask |= AC_ERR_OTHER;
1035 			ehi->action |= ATA_EH_RESET;
1036 			ata_ehi_push_desc(ehi, "PMP DMA CS errata");
1037 			pp->do_port_rst = 1;
1038 			freeze = 1;
1039 		}
1040 
1041 		/* find out the offending link and qc */
1042 		if (sata_pmp_attached(ap)) {
1043 			context = readl(port + PORT_CONTEXT);
1044 			pmp = (context >> 5) & 0xf;
1045 
1046 			if (pmp < ap->nr_pmp_links) {
1047 				link = &ap->pmp_link[pmp];
1048 				ehi = &link->eh_info;
1049 				qc = ata_qc_from_tag(ap, link->active_tag);
1050 
1051 				ata_ehi_clear_desc(ehi);
1052 				ata_ehi_push_desc(ehi, "irq_stat 0x%08x",
1053 						  irq_stat);
1054 			} else {
1055 				err_mask |= AC_ERR_HSM;
1056 				action |= ATA_EH_RESET;
1057 				freeze = 1;
1058 			}
1059 		} else
1060 			qc = ata_qc_from_tag(ap, link->active_tag);
1061 
1062 		/* analyze CMD_ERR */
1063 		cerr = readl(port + PORT_CMD_ERR);
1064 		if (cerr < ARRAY_SIZE(sil24_cerr_db))
1065 			ci = &sil24_cerr_db[cerr];
1066 
1067 		if (ci && ci->desc) {
1068 			err_mask |= ci->err_mask;
1069 			action |= ci->action;
1070 			if (action & ATA_EH_RESET)
1071 				freeze = 1;
1072 			ata_ehi_push_desc(ehi, "%s", ci->desc);
1073 		} else {
1074 			err_mask |= AC_ERR_OTHER;
1075 			action |= ATA_EH_RESET;
1076 			freeze = 1;
1077 			ata_ehi_push_desc(ehi, "unknown command error %d",
1078 					  cerr);
1079 		}
1080 
1081 		/* record error info */
1082 		if (qc)
1083 			qc->err_mask |= err_mask;
1084 		else
1085 			ehi->err_mask |= err_mask;
1086 
1087 		ehi->action |= action;
1088 
1089 		/* if PMP, resume */
1090 		if (sata_pmp_attached(ap))
1091 			writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
1092 	}
1093 
1094 	/* freeze or abort */
1095 	if (freeze)
1096 		ata_port_freeze(ap);
1097 	else if (abort) {
1098 		if (qc)
1099 			ata_link_abort(qc->dev->link);
1100 		else
1101 			ata_port_abort(ap);
1102 	}
1103 }
1104 
1105 static inline void sil24_host_intr(struct ata_port *ap)
1106 {
1107 	void __iomem *port = sil24_port_base(ap);
1108 	u32 slot_stat, qc_active;
1109 	int rc;
1110 
1111 	/* If PCIX_IRQ_WOC, there's an inherent race window between
1112 	 * clearing IRQ pending status and reading PORT_SLOT_STAT
1113 	 * which may cause spurious interrupts afterwards.  This is
1114 	 * unavoidable and much better than losing interrupts which
1115 	 * happens if IRQ pending is cleared after reading
1116 	 * PORT_SLOT_STAT.
1117 	 */
1118 	if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
1119 		writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
1120 
1121 	slot_stat = readl(port + PORT_SLOT_STAT);
1122 
1123 	if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
1124 		sil24_error_intr(ap);
1125 		return;
1126 	}
1127 
1128 	qc_active = slot_stat & ~HOST_SSTAT_ATTN;
1129 	rc = ata_qc_complete_multiple(ap, qc_active);
1130 	if (rc > 0)
1131 		return;
1132 	if (rc < 0) {
1133 		struct ata_eh_info *ehi = &ap->link.eh_info;
1134 		ehi->err_mask |= AC_ERR_HSM;
1135 		ehi->action |= ATA_EH_RESET;
1136 		ata_port_freeze(ap);
1137 		return;
1138 	}
1139 
1140 	/* spurious interrupts are expected if PCIX_IRQ_WOC */
1141 	if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
1142 		ata_port_info(ap,
1143 			"spurious interrupt (slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1144 			slot_stat, ap->link.active_tag, ap->link.sactive);
1145 }
1146 
1147 static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
1148 {
1149 	struct ata_host *host = dev_instance;
1150 	void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1151 	unsigned handled = 0;
1152 	u32 status;
1153 	int i;
1154 
1155 	status = readl(host_base + HOST_IRQ_STAT);
1156 
1157 	if (status == 0xffffffff) {
1158 		dev_err(host->dev, "IRQ status == 0xffffffff, "
1159 			"PCI fault or device removal?\n");
1160 		goto out;
1161 	}
1162 
1163 	if (!(status & IRQ_STAT_4PORTS))
1164 		goto out;
1165 
1166 	spin_lock(&host->lock);
1167 
1168 	for (i = 0; i < host->n_ports; i++)
1169 		if (status & (1 << i)) {
1170 			sil24_host_intr(host->ports[i]);
1171 			handled++;
1172 		}
1173 
1174 	spin_unlock(&host->lock);
1175  out:
1176 	return IRQ_RETVAL(handled);
1177 }
1178 
1179 static void sil24_error_handler(struct ata_port *ap)
1180 {
1181 	struct sil24_port_priv *pp = ap->private_data;
1182 
1183 	if (sil24_init_port(ap))
1184 		ata_eh_freeze_port(ap);
1185 
1186 	sata_pmp_error_handler(ap);
1187 
1188 	pp->do_port_rst = 0;
1189 }
1190 
1191 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
1192 {
1193 	struct ata_port *ap = qc->ap;
1194 
1195 	/* make DMA engine forget about the failed command */
1196 	if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap))
1197 		ata_eh_freeze_port(ap);
1198 }
1199 
1200 static int sil24_port_start(struct ata_port *ap)
1201 {
1202 	struct device *dev = ap->host->dev;
1203 	struct sil24_port_priv *pp;
1204 	union sil24_cmd_block *cb;
1205 	size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
1206 	dma_addr_t cb_dma;
1207 
1208 	pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1209 	if (!pp)
1210 		return -ENOMEM;
1211 
1212 	cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
1213 	if (!cb)
1214 		return -ENOMEM;
1215 	memset(cb, 0, cb_size);
1216 
1217 	pp->cmd_block = cb;
1218 	pp->cmd_block_dma = cb_dma;
1219 
1220 	ap->private_data = pp;
1221 
1222 	ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
1223 	ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
1224 
1225 	return 0;
1226 }
1227 
1228 static void sil24_init_controller(struct ata_host *host)
1229 {
1230 	void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1231 	u32 tmp;
1232 	int i;
1233 
1234 	/* GPIO off */
1235 	writel(0, host_base + HOST_FLASH_CMD);
1236 
1237 	/* clear global reset & mask interrupts during initialization */
1238 	writel(0, host_base + HOST_CTRL);
1239 
1240 	/* init ports */
1241 	for (i = 0; i < host->n_ports; i++) {
1242 		struct ata_port *ap = host->ports[i];
1243 		void __iomem *port = sil24_port_base(ap);
1244 
1245 
1246 		/* Initial PHY setting */
1247 		writel(0x20c, port + PORT_PHY_CFG);
1248 
1249 		/* Clear port RST */
1250 		tmp = readl(port + PORT_CTRL_STAT);
1251 		if (tmp & PORT_CS_PORT_RST) {
1252 			writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
1253 			tmp = ata_wait_register(NULL, port + PORT_CTRL_STAT,
1254 						PORT_CS_PORT_RST,
1255 						PORT_CS_PORT_RST, 10, 100);
1256 			if (tmp & PORT_CS_PORT_RST)
1257 				dev_err(host->dev,
1258 					"failed to clear port RST\n");
1259 		}
1260 
1261 		/* configure port */
1262 		sil24_config_port(ap);
1263 	}
1264 
1265 	/* Turn on interrupts */
1266 	writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
1267 }
1268 
1269 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1270 {
1271 	extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
1272 	struct ata_port_info pi = sil24_port_info[ent->driver_data];
1273 	const struct ata_port_info *ppi[] = { &pi, NULL };
1274 	void __iomem * const *iomap;
1275 	struct ata_host *host;
1276 	int rc;
1277 	u32 tmp;
1278 
1279 	/* cause link error if sil24_cmd_block is sized wrongly */
1280 	if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
1281 		__MARKER__sil24_cmd_block_is_sized_wrongly = 1;
1282 
1283 	ata_print_version_once(&pdev->dev, DRV_VERSION);
1284 
1285 	/* acquire resources */
1286 	rc = pcim_enable_device(pdev);
1287 	if (rc)
1288 		return rc;
1289 
1290 	rc = pcim_iomap_regions(pdev,
1291 				(1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
1292 				DRV_NAME);
1293 	if (rc)
1294 		return rc;
1295 	iomap = pcim_iomap_table(pdev);
1296 
1297 	/* apply workaround for completion IRQ loss on PCI-X errata */
1298 	if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
1299 		tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
1300 		if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
1301 			dev_info(&pdev->dev,
1302 				 "Applying completion IRQ loss on PCI-X errata fix\n");
1303 		else
1304 			pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
1305 	}
1306 
1307 	/* allocate and fill host */
1308 	host = ata_host_alloc_pinfo(&pdev->dev, ppi,
1309 				    SIL24_FLAG2NPORTS(ppi[0]->flags));
1310 	if (!host)
1311 		return -ENOMEM;
1312 	host->iomap = iomap;
1313 
1314 	/* configure and activate the device */
1315 	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
1316 		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
1317 		if (rc) {
1318 			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1319 			if (rc) {
1320 				dev_err(&pdev->dev,
1321 					"64-bit DMA enable failed\n");
1322 				return rc;
1323 			}
1324 		}
1325 	} else {
1326 		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
1327 		if (rc) {
1328 			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
1329 			return rc;
1330 		}
1331 		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1332 		if (rc) {
1333 			dev_err(&pdev->dev,
1334 				"32-bit consistent DMA enable failed\n");
1335 			return rc;
1336 		}
1337 	}
1338 
1339 	/* Set max read request size to 4096.  This slightly increases
1340 	 * write throughput for pci-e variants.
1341 	 */
1342 	pcie_set_readrq(pdev, 4096);
1343 
1344 	sil24_init_controller(host);
1345 
1346 	if (sata_sil24_msi && !pci_enable_msi(pdev)) {
1347 		dev_info(&pdev->dev, "Using MSI\n");
1348 		pci_intx(pdev, 0);
1349 	}
1350 
1351 	pci_set_master(pdev);
1352 	return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
1353 				 &sil24_sht);
1354 }
1355 
1356 #ifdef CONFIG_PM_SLEEP
1357 static int sil24_pci_device_resume(struct pci_dev *pdev)
1358 {
1359 	struct ata_host *host = pci_get_drvdata(pdev);
1360 	void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1361 	int rc;
1362 
1363 	rc = ata_pci_device_do_resume(pdev);
1364 	if (rc)
1365 		return rc;
1366 
1367 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
1368 		writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
1369 
1370 	sil24_init_controller(host);
1371 
1372 	ata_host_resume(host);
1373 
1374 	return 0;
1375 }
1376 #endif
1377 
1378 #ifdef CONFIG_PM
1379 static int sil24_port_resume(struct ata_port *ap)
1380 {
1381 	sil24_config_pmp(ap, ap->nr_pmp_links);
1382 	return 0;
1383 }
1384 #endif
1385 
1386 module_pci_driver(sil24_pci_driver);
1387 
1388 MODULE_AUTHOR("Tejun Heo");
1389 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1390 MODULE_LICENSE("GPL");
1391 MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
1392