1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * sata_sil.c - Silicon Image SATA 4 * 5 * Maintained by: Tejun Heo <tj@kernel.org> 6 * Please ALWAYS copy linux-ide@vger.kernel.org 7 * on emails. 8 * 9 * Copyright 2003-2005 Red Hat, Inc. 10 * Copyright 2003 Benjamin Herrenschmidt 11 * 12 * libata documentation is available via 'make {ps|pdf}docs', 13 * as Documentation/driver-api/libata.rst 14 * 15 * Documentation for SiI 3112: 16 * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 17 * 18 * Other errata and documentation available under NDA. 19 */ 20 21 #include <linux/kernel.h> 22 #include <linux/module.h> 23 #include <linux/pci.h> 24 #include <linux/blkdev.h> 25 #include <linux/delay.h> 26 #include <linux/interrupt.h> 27 #include <linux/device.h> 28 #include <scsi/scsi_host.h> 29 #include <linux/libata.h> 30 #include <linux/dmi.h> 31 32 #define DRV_NAME "sata_sil" 33 #define DRV_VERSION "2.4" 34 35 #define SIL_DMA_BOUNDARY 0x7fffffffUL 36 37 enum { 38 SIL_MMIO_BAR = 5, 39 40 /* 41 * host flags 42 */ 43 SIL_FLAG_NO_SATA_IRQ = (1 << 28), 44 SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), 45 SIL_FLAG_MOD15WRITE = (1 << 30), 46 47 SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA, 48 49 /* 50 * Controller IDs 51 */ 52 sil_3112 = 0, 53 sil_3112_no_sata_irq = 1, 54 sil_3512 = 2, 55 sil_3114 = 3, 56 57 /* 58 * Register offsets 59 */ 60 SIL_SYSCFG = 0x48, 61 62 /* 63 * Register bits 64 */ 65 /* SYSCFG */ 66 SIL_MASK_IDE0_INT = (1 << 22), 67 SIL_MASK_IDE1_INT = (1 << 23), 68 SIL_MASK_IDE2_INT = (1 << 24), 69 SIL_MASK_IDE3_INT = (1 << 25), 70 SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, 71 SIL_MASK_4PORT = SIL_MASK_2PORT | 72 SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, 73 74 /* BMDMA/BMDMA2 */ 75 SIL_INTR_STEERING = (1 << 1), 76 77 SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ 78 SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ 79 SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ 80 SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ 81 SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ 82 SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ 83 SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ 84 SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ 85 SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ 86 SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ 87 88 /* SIEN */ 89 SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ 90 91 /* 92 * Others 93 */ 94 SIL_QUIRK_MOD15WRITE = (1 << 0), 95 SIL_QUIRK_UDMA5MAX = (1 << 1), 96 }; 97 98 static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); 99 #ifdef CONFIG_PM_SLEEP 100 static int sil_pci_device_resume(struct pci_dev *pdev); 101 #endif 102 static void sil_dev_config(struct ata_device *dev); 103 static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); 104 static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); 105 static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed); 106 static enum ata_completion_errors sil_qc_prep(struct ata_queued_cmd *qc); 107 static void sil_bmdma_setup(struct ata_queued_cmd *qc); 108 static void sil_bmdma_start(struct ata_queued_cmd *qc); 109 static void sil_bmdma_stop(struct ata_queued_cmd *qc); 110 static void sil_freeze(struct ata_port *ap); 111 static void sil_thaw(struct ata_port *ap); 112 113 114 static const struct pci_device_id sil_pci_tbl[] = { 115 { PCI_VDEVICE(CMD, 0x3112), sil_3112 }, 116 { PCI_VDEVICE(CMD, 0x0240), sil_3112 }, 117 { PCI_VDEVICE(CMD, 0x3512), sil_3512 }, 118 { PCI_VDEVICE(CMD, 0x3114), sil_3114 }, 119 { PCI_VDEVICE(ATI, 0x436e), sil_3112 }, 120 { PCI_VDEVICE(ATI, 0x4379), sil_3112_no_sata_irq }, 121 { PCI_VDEVICE(ATI, 0x437a), sil_3112_no_sata_irq }, 122 123 { } /* terminate list */ 124 }; 125 126 127 /* TODO firmware versions should be added - eric */ 128 static const struct sil_drivelist { 129 const char *product; 130 unsigned int quirk; 131 } sil_quirks[] = { 132 { "ST320012AS", SIL_QUIRK_MOD15WRITE }, 133 { "ST330013AS", SIL_QUIRK_MOD15WRITE }, 134 { "ST340017AS", SIL_QUIRK_MOD15WRITE }, 135 { "ST360015AS", SIL_QUIRK_MOD15WRITE }, 136 { "ST380023AS", SIL_QUIRK_MOD15WRITE }, 137 { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, 138 { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, 139 { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, 140 { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, 141 { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, 142 { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, 143 { "TOSHIBA MK2561GSYN", SIL_QUIRK_MOD15WRITE }, 144 { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, 145 { } 146 }; 147 148 static struct pci_driver sil_pci_driver = { 149 .name = DRV_NAME, 150 .id_table = sil_pci_tbl, 151 .probe = sil_init_one, 152 .remove = ata_pci_remove_one, 153 #ifdef CONFIG_PM_SLEEP 154 .suspend = ata_pci_device_suspend, 155 .resume = sil_pci_device_resume, 156 #endif 157 }; 158 159 static const struct scsi_host_template sil_sht = { 160 ATA_BASE_SHT(DRV_NAME), 161 /** These controllers support Large Block Transfer which allows 162 transfer chunks up to 2GB and which cross 64KB boundaries, 163 therefore the DMA limits are more relaxed than standard ATA SFF. */ 164 .dma_boundary = SIL_DMA_BOUNDARY, 165 .sg_tablesize = ATA_MAX_PRD 166 }; 167 168 static struct ata_port_operations sil_ops = { 169 .inherits = &ata_bmdma32_port_ops, 170 .dev_config = sil_dev_config, 171 .set_mode = sil_set_mode, 172 .bmdma_setup = sil_bmdma_setup, 173 .bmdma_start = sil_bmdma_start, 174 .bmdma_stop = sil_bmdma_stop, 175 .qc_prep = sil_qc_prep, 176 .freeze = sil_freeze, 177 .thaw = sil_thaw, 178 .scr_read = sil_scr_read, 179 .scr_write = sil_scr_write, 180 }; 181 182 static const struct ata_port_info sil_port_info[] = { 183 /* sil_3112 */ 184 { 185 .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, 186 .pio_mask = ATA_PIO4, 187 .mwdma_mask = ATA_MWDMA2, 188 .udma_mask = ATA_UDMA5, 189 .port_ops = &sil_ops, 190 }, 191 /* sil_3112_no_sata_irq */ 192 { 193 .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | 194 SIL_FLAG_NO_SATA_IRQ, 195 .pio_mask = ATA_PIO4, 196 .mwdma_mask = ATA_MWDMA2, 197 .udma_mask = ATA_UDMA5, 198 .port_ops = &sil_ops, 199 }, 200 /* sil_3512 */ 201 { 202 .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, 203 .pio_mask = ATA_PIO4, 204 .mwdma_mask = ATA_MWDMA2, 205 .udma_mask = ATA_UDMA5, 206 .port_ops = &sil_ops, 207 }, 208 /* sil_3114 */ 209 { 210 .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, 211 .pio_mask = ATA_PIO4, 212 .mwdma_mask = ATA_MWDMA2, 213 .udma_mask = ATA_UDMA5, 214 .port_ops = &sil_ops, 215 }, 216 }; 217 218 /* per-port register offsets */ 219 /* TODO: we can probably calculate rather than use a table */ 220 static const struct { 221 unsigned long tf; /* ATA taskfile register block */ 222 unsigned long ctl; /* ATA control/altstatus register block */ 223 unsigned long bmdma; /* DMA register block */ 224 unsigned long bmdma2; /* DMA register block #2 */ 225 unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ 226 unsigned long scr; /* SATA control register block */ 227 unsigned long sien; /* SATA Interrupt Enable register */ 228 unsigned long xfer_mode;/* data transfer mode register */ 229 unsigned long sfis_cfg; /* SATA FIS reception config register */ 230 } sil_port[] = { 231 /* port 0 ... */ 232 /* tf ctl bmdma bmdma2 fifo scr sien mode sfis */ 233 { 0x80, 0x8A, 0x0, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, 234 { 0xC0, 0xCA, 0x8, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, 235 { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, 236 { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, 237 /* ... port 3 */ 238 }; 239 240 MODULE_AUTHOR("Jeff Garzik"); 241 MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); 242 MODULE_LICENSE("GPL"); 243 MODULE_DEVICE_TABLE(pci, sil_pci_tbl); 244 MODULE_VERSION(DRV_VERSION); 245 246 static int slow_down; 247 module_param(slow_down, int, 0444); 248 MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); 249 250 251 static void sil_bmdma_stop(struct ata_queued_cmd *qc) 252 { 253 struct ata_port *ap = qc->ap; 254 void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; 255 void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; 256 257 /* clear start/stop bit - can safely always write 0 */ 258 iowrite8(0, bmdma2); 259 260 /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ 261 ata_sff_dma_pause(ap); 262 } 263 264 static void sil_bmdma_setup(struct ata_queued_cmd *qc) 265 { 266 struct ata_port *ap = qc->ap; 267 void __iomem *bmdma = ap->ioaddr.bmdma_addr; 268 269 /* load PRD table addr. */ 270 iowrite32(ap->bmdma_prd_dma, bmdma + ATA_DMA_TABLE_OFS); 271 272 /* issue r/w command */ 273 ap->ops->sff_exec_command(ap, &qc->tf); 274 } 275 276 static void sil_bmdma_start(struct ata_queued_cmd *qc) 277 { 278 unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); 279 struct ata_port *ap = qc->ap; 280 void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; 281 void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; 282 u8 dmactl = ATA_DMA_START; 283 284 /* set transfer direction, start host DMA transaction 285 Note: For Large Block Transfer to work, the DMA must be started 286 using the bmdma2 register. */ 287 if (!rw) 288 dmactl |= ATA_DMA_WR; 289 iowrite8(dmactl, bmdma2); 290 } 291 292 /* The way God intended PCI IDE scatter/gather lists to look and behave... */ 293 static void sil_fill_sg(struct ata_queued_cmd *qc) 294 { 295 struct scatterlist *sg; 296 struct ata_port *ap = qc->ap; 297 struct ata_bmdma_prd *prd, *last_prd = NULL; 298 unsigned int si; 299 300 prd = &ap->bmdma_prd[0]; 301 for_each_sg(qc->sg, sg, qc->n_elem, si) { 302 /* Note h/w doesn't support 64-bit, so we unconditionally 303 * truncate dma_addr_t to u32. 304 */ 305 u32 addr = (u32) sg_dma_address(sg); 306 u32 sg_len = sg_dma_len(sg); 307 308 prd->addr = cpu_to_le32(addr); 309 prd->flags_len = cpu_to_le32(sg_len); 310 311 last_prd = prd; 312 prd++; 313 } 314 315 if (likely(last_prd)) 316 last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT); 317 } 318 319 static enum ata_completion_errors sil_qc_prep(struct ata_queued_cmd *qc) 320 { 321 if (!(qc->flags & ATA_QCFLAG_DMAMAP)) 322 return AC_ERR_OK; 323 324 sil_fill_sg(qc); 325 326 return AC_ERR_OK; 327 } 328 329 static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) 330 { 331 u8 cache_line = 0; 332 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); 333 return cache_line; 334 } 335 336 /** 337 * sil_set_mode - wrap set_mode functions 338 * @link: link to set up 339 * @r_failed: returned device when we fail 340 * 341 * Wrap the libata method for device setup as after the setup we need 342 * to inspect the results and do some configuration work 343 */ 344 345 static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed) 346 { 347 struct ata_port *ap = link->ap; 348 void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; 349 void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; 350 struct ata_device *dev; 351 u32 tmp, dev_mode[2] = { }; 352 int rc; 353 354 rc = ata_do_set_mode(link, r_failed); 355 if (rc) 356 return rc; 357 358 ata_for_each_dev(dev, link, ALL) { 359 if (!ata_dev_enabled(dev)) 360 dev_mode[dev->devno] = 0; /* PIO0/1/2 */ 361 else if (dev->flags & ATA_DFLAG_PIO) 362 dev_mode[dev->devno] = 1; /* PIO3/4 */ 363 else 364 dev_mode[dev->devno] = 3; /* UDMA */ 365 /* value 2 indicates MDMA */ 366 } 367 368 tmp = readl(addr); 369 tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); 370 tmp |= dev_mode[0]; 371 tmp |= (dev_mode[1] << 4); 372 writel(tmp, addr); 373 readl(addr); /* flush */ 374 return 0; 375 } 376 377 static inline void __iomem *sil_scr_addr(struct ata_port *ap, 378 unsigned int sc_reg) 379 { 380 void __iomem *offset = ap->ioaddr.scr_addr; 381 382 switch (sc_reg) { 383 case SCR_STATUS: 384 return offset + 4; 385 case SCR_ERROR: 386 return offset + 8; 387 case SCR_CONTROL: 388 return offset; 389 default: 390 /* do nothing */ 391 break; 392 } 393 394 return NULL; 395 } 396 397 static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) 398 { 399 void __iomem *mmio = sil_scr_addr(link->ap, sc_reg); 400 401 if (mmio) { 402 *val = readl(mmio); 403 return 0; 404 } 405 return -EINVAL; 406 } 407 408 static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) 409 { 410 void __iomem *mmio = sil_scr_addr(link->ap, sc_reg); 411 412 if (mmio) { 413 writel(val, mmio); 414 return 0; 415 } 416 return -EINVAL; 417 } 418 419 static void sil_host_intr(struct ata_port *ap, u32 bmdma2) 420 { 421 struct ata_eh_info *ehi = &ap->link.eh_info; 422 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); 423 u8 status; 424 425 if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { 426 u32 serror = 0xffffffff; 427 428 /* SIEN doesn't mask SATA IRQs on some 3112s. Those 429 * controllers continue to assert IRQ as long as 430 * SError bits are pending. Clear SError immediately. 431 */ 432 sil_scr_read(&ap->link, SCR_ERROR, &serror); 433 sil_scr_write(&ap->link, SCR_ERROR, serror); 434 435 /* Sometimes spurious interrupts occur, double check 436 * it's PHYRDY CHG. 437 */ 438 if (serror & SERR_PHYRDY_CHG) { 439 ap->link.eh_info.serror |= serror; 440 goto freeze; 441 } 442 443 if (!(bmdma2 & SIL_DMA_COMPLETE)) 444 return; 445 } 446 447 if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { 448 /* this sometimes happens, just clear IRQ */ 449 ap->ops->sff_check_status(ap); 450 return; 451 } 452 453 /* Check whether we are expecting interrupt in this state */ 454 switch (ap->hsm_task_state) { 455 case HSM_ST_FIRST: 456 /* Some pre-ATAPI-4 devices assert INTRQ 457 * at this state when ready to receive CDB. 458 */ 459 460 /* Check the ATA_DFLAG_CDB_INTR flag is enough here. 461 * The flag was turned on only for atapi devices. No 462 * need to check ata_is_atapi(qc->tf.protocol) again. 463 */ 464 if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) 465 goto err_hsm; 466 break; 467 case HSM_ST_LAST: 468 if (ata_is_dma(qc->tf.protocol)) { 469 /* clear DMA-Start bit */ 470 ap->ops->bmdma_stop(qc); 471 472 if (bmdma2 & SIL_DMA_ERROR) { 473 qc->err_mask |= AC_ERR_HOST_BUS; 474 ap->hsm_task_state = HSM_ST_ERR; 475 } 476 } 477 break; 478 case HSM_ST: 479 break; 480 default: 481 goto err_hsm; 482 } 483 484 /* check main status, clearing INTRQ */ 485 status = ap->ops->sff_check_status(ap); 486 if (unlikely(status & ATA_BUSY)) 487 goto err_hsm; 488 489 /* ack bmdma irq events */ 490 ata_bmdma_irq_clear(ap); 491 492 /* kick HSM in the ass */ 493 ata_sff_hsm_move(ap, qc, status, 0); 494 495 if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) 496 ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2); 497 498 return; 499 500 err_hsm: 501 qc->err_mask |= AC_ERR_HSM; 502 freeze: 503 ata_port_freeze(ap); 504 } 505 506 static irqreturn_t sil_interrupt(int irq, void *dev_instance) 507 { 508 struct ata_host *host = dev_instance; 509 void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; 510 int handled = 0; 511 int i; 512 513 spin_lock(&host->lock); 514 515 for (i = 0; i < host->n_ports; i++) { 516 struct ata_port *ap = host->ports[i]; 517 u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); 518 519 /* turn off SATA_IRQ if not supported */ 520 if (ap->flags & SIL_FLAG_NO_SATA_IRQ) 521 bmdma2 &= ~SIL_DMA_SATA_IRQ; 522 523 if (bmdma2 == 0xffffffff || 524 !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) 525 continue; 526 527 sil_host_intr(ap, bmdma2); 528 handled = 1; 529 } 530 531 spin_unlock(&host->lock); 532 533 return IRQ_RETVAL(handled); 534 } 535 536 static void sil_freeze(struct ata_port *ap) 537 { 538 void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; 539 u32 tmp; 540 541 /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ 542 writel(0, mmio_base + sil_port[ap->port_no].sien); 543 544 /* plug IRQ */ 545 tmp = readl(mmio_base + SIL_SYSCFG); 546 tmp |= SIL_MASK_IDE0_INT << ap->port_no; 547 writel(tmp, mmio_base + SIL_SYSCFG); 548 readl(mmio_base + SIL_SYSCFG); /* flush */ 549 550 /* Ensure DMA_ENABLE is off. 551 * 552 * This is because the controller will not give us access to the 553 * taskfile registers while a DMA is in progress 554 */ 555 iowrite8(ioread8(ap->ioaddr.bmdma_addr) & ~SIL_DMA_ENABLE, 556 ap->ioaddr.bmdma_addr); 557 558 /* According to ata_bmdma_stop, an HDMA transition requires 559 * on PIO cycle. But we can't read a taskfile register. 560 */ 561 ioread8(ap->ioaddr.bmdma_addr); 562 } 563 564 static void sil_thaw(struct ata_port *ap) 565 { 566 void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; 567 u32 tmp; 568 569 /* clear IRQ */ 570 ap->ops->sff_check_status(ap); 571 ata_bmdma_irq_clear(ap); 572 573 /* turn on SATA IRQ if supported */ 574 if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) 575 writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); 576 577 /* turn on IRQ */ 578 tmp = readl(mmio_base + SIL_SYSCFG); 579 tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); 580 writel(tmp, mmio_base + SIL_SYSCFG); 581 } 582 583 /** 584 * sil_dev_config - Apply device/host-specific errata fixups 585 * @dev: Device to be examined 586 * 587 * After the IDENTIFY [PACKET] DEVICE step is complete, and a 588 * device is known to be present, this function is called. 589 * We apply two errata fixups which are specific to Silicon Image, 590 * a Seagate and a Maxtor fixup. 591 * 592 * For certain Seagate devices, we must limit the maximum sectors 593 * to under 8K. 594 * 595 * For certain Maxtor devices, we must not program the drive 596 * beyond udma5. 597 * 598 * Both fixups are unfairly pessimistic. As soon as I get more 599 * information on these errata, I will create a more exhaustive 600 * list, and apply the fixups to only the specific 601 * devices/hosts/firmwares that need it. 602 * 603 * 20040111 - Seagate drives affected by the Mod15Write bug are quirked 604 * The Maxtor quirk is in sil_quirks, but I'm keeping the original 605 * pessimistic fix for the following reasons... 606 * - There seems to be less info on it, only one device gleaned off the 607 * Windows driver, maybe only one is affected. More info would be greatly 608 * appreciated. 609 * - But then again UDMA5 is hardly anything to complain about 610 */ 611 static void sil_dev_config(struct ata_device *dev) 612 { 613 struct ata_port *ap = dev->link->ap; 614 int print_info = ap->link.eh_context.i.flags & ATA_EHI_PRINTINFO; 615 unsigned int n, quirks = 0; 616 unsigned char model_num[ATA_ID_PROD_LEN + 1]; 617 618 /* This controller doesn't support trim */ 619 dev->horkage |= ATA_HORKAGE_NOTRIM; 620 621 ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); 622 623 for (n = 0; sil_quirks[n].product; n++) 624 if (!strcmp(sil_quirks[n].product, model_num)) { 625 quirks = sil_quirks[n].quirk; 626 break; 627 } 628 629 /* limit requests to 15 sectors */ 630 if (slow_down || 631 ((ap->flags & SIL_FLAG_MOD15WRITE) && 632 (quirks & SIL_QUIRK_MOD15WRITE))) { 633 if (print_info) 634 ata_dev_info(dev, 635 "applying Seagate errata fix (mod15write workaround)\n"); 636 dev->max_sectors = 15; 637 return; 638 } 639 640 /* limit to udma5 */ 641 if (quirks & SIL_QUIRK_UDMA5MAX) { 642 if (print_info) 643 ata_dev_info(dev, "applying Maxtor errata fix %s\n", 644 model_num); 645 dev->udma_mask &= ATA_UDMA5; 646 return; 647 } 648 } 649 650 static void sil_init_controller(struct ata_host *host) 651 { 652 struct pci_dev *pdev = to_pci_dev(host->dev); 653 void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; 654 u8 cls; 655 u32 tmp; 656 int i; 657 658 /* Initialize FIFO PCI bus arbitration */ 659 cls = sil_get_device_cache_line(pdev); 660 if (cls) { 661 cls >>= 3; 662 cls++; /* cls = (line_size/8)+1 */ 663 for (i = 0; i < host->n_ports; i++) 664 writew(cls << 8 | cls, 665 mmio_base + sil_port[i].fifo_cfg); 666 } else 667 dev_warn(&pdev->dev, 668 "cache line size not set. Driver may not function\n"); 669 670 /* Apply R_ERR on DMA activate FIS errata workaround */ 671 if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) { 672 int cnt; 673 674 for (i = 0, cnt = 0; i < host->n_ports; i++) { 675 tmp = readl(mmio_base + sil_port[i].sfis_cfg); 676 if ((tmp & 0x3) != 0x01) 677 continue; 678 if (!cnt) 679 dev_info(&pdev->dev, 680 "Applying R_ERR on DMA activate FIS errata fix\n"); 681 writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); 682 cnt++; 683 } 684 } 685 686 if (host->n_ports == 4) { 687 /* flip the magic "make 4 ports work" bit */ 688 tmp = readl(mmio_base + sil_port[2].bmdma); 689 if ((tmp & SIL_INTR_STEERING) == 0) 690 writel(tmp | SIL_INTR_STEERING, 691 mmio_base + sil_port[2].bmdma); 692 } 693 } 694 695 static bool sil_broken_system_poweroff(struct pci_dev *pdev) 696 { 697 static const struct dmi_system_id broken_systems[] = { 698 { 699 .ident = "HP Compaq nx6325", 700 .matches = { 701 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 702 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), 703 }, 704 /* PCI slot number of the controller */ 705 .driver_data = (void *)0x12UL, 706 }, 707 708 { } /* terminate list */ 709 }; 710 const struct dmi_system_id *dmi = dmi_first_match(broken_systems); 711 712 if (dmi) { 713 unsigned long slot = (unsigned long)dmi->driver_data; 714 /* apply the quirk only to on-board controllers */ 715 return slot == PCI_SLOT(pdev->devfn); 716 } 717 718 return false; 719 } 720 721 static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 722 { 723 int board_id = ent->driver_data; 724 struct ata_port_info pi = sil_port_info[board_id]; 725 const struct ata_port_info *ppi[] = { &pi, NULL }; 726 struct ata_host *host; 727 void __iomem *mmio_base; 728 int n_ports, rc; 729 unsigned int i; 730 731 ata_print_version_once(&pdev->dev, DRV_VERSION); 732 733 /* allocate host */ 734 n_ports = 2; 735 if (board_id == sil_3114) 736 n_ports = 4; 737 738 if (sil_broken_system_poweroff(pdev)) { 739 pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN | 740 ATA_FLAG_NO_HIBERNATE_SPINDOWN; 741 dev_info(&pdev->dev, "quirky BIOS, skipping spindown " 742 "on poweroff and hibernation\n"); 743 } 744 745 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); 746 if (!host) 747 return -ENOMEM; 748 749 /* acquire resources and fill host */ 750 rc = pcim_enable_device(pdev); 751 if (rc) 752 return rc; 753 754 rc = pcim_iomap_regions(pdev, 1 << SIL_MMIO_BAR, DRV_NAME); 755 if (rc == -EBUSY) 756 pcim_pin_device(pdev); 757 if (rc) 758 return rc; 759 host->iomap = pcim_iomap_table(pdev); 760 761 rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK); 762 if (rc) 763 return rc; 764 765 mmio_base = host->iomap[SIL_MMIO_BAR]; 766 767 for (i = 0; i < host->n_ports; i++) { 768 struct ata_port *ap = host->ports[i]; 769 struct ata_ioports *ioaddr = &ap->ioaddr; 770 771 ioaddr->cmd_addr = mmio_base + sil_port[i].tf; 772 ioaddr->altstatus_addr = 773 ioaddr->ctl_addr = mmio_base + sil_port[i].ctl; 774 ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; 775 ioaddr->scr_addr = mmio_base + sil_port[i].scr; 776 ata_sff_std_ports(ioaddr); 777 778 ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio"); 779 ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf"); 780 } 781 782 /* initialize and activate */ 783 sil_init_controller(host); 784 785 pci_set_master(pdev); 786 return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED, 787 &sil_sht); 788 } 789 790 #ifdef CONFIG_PM_SLEEP 791 static int sil_pci_device_resume(struct pci_dev *pdev) 792 { 793 struct ata_host *host = pci_get_drvdata(pdev); 794 int rc; 795 796 rc = ata_pci_device_do_resume(pdev); 797 if (rc) 798 return rc; 799 800 sil_init_controller(host); 801 ata_host_resume(host); 802 803 return 0; 804 } 805 #endif 806 807 module_pci_driver(sil_pci_driver); 808