1 /* 2 * sata_sil.c - Silicon Image SATA 3 * 4 * Maintained by: Jeff Garzik <jgarzik@pobox.com> 5 * Please ALWAYS copy linux-ide@vger.kernel.org 6 * on emails. 7 * 8 * Copyright 2003-2005 Red Hat, Inc. 9 * Copyright 2003 Benjamin Herrenschmidt 10 * 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2, or (at your option) 15 * any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; see the file COPYING. If not, write to 24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * 27 * libata documentation is available via 'make {ps|pdf}docs', 28 * as Documentation/DocBook/libata.* 29 * 30 * Documentation for SiI 3112: 31 * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 32 * 33 * Other errata and documentation available under NDA. 34 * 35 */ 36 37 #include <linux/kernel.h> 38 #include <linux/module.h> 39 #include <linux/pci.h> 40 #include <linux/init.h> 41 #include <linux/blkdev.h> 42 #include <linux/delay.h> 43 #include <linux/interrupt.h> 44 #include <linux/device.h> 45 #include <scsi/scsi_host.h> 46 #include <linux/libata.h> 47 48 #define DRV_NAME "sata_sil" 49 #define DRV_VERSION "2.3" 50 51 enum { 52 SIL_MMIO_BAR = 5, 53 54 /* 55 * host flags 56 */ 57 SIL_FLAG_NO_SATA_IRQ = (1 << 28), 58 SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), 59 SIL_FLAG_MOD15WRITE = (1 << 30), 60 61 SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | 62 ATA_FLAG_MMIO, 63 SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME, 64 65 /* 66 * Controller IDs 67 */ 68 sil_3112 = 0, 69 sil_3112_no_sata_irq = 1, 70 sil_3512 = 2, 71 sil_3114 = 3, 72 73 /* 74 * Register offsets 75 */ 76 SIL_SYSCFG = 0x48, 77 78 /* 79 * Register bits 80 */ 81 /* SYSCFG */ 82 SIL_MASK_IDE0_INT = (1 << 22), 83 SIL_MASK_IDE1_INT = (1 << 23), 84 SIL_MASK_IDE2_INT = (1 << 24), 85 SIL_MASK_IDE3_INT = (1 << 25), 86 SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, 87 SIL_MASK_4PORT = SIL_MASK_2PORT | 88 SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, 89 90 /* BMDMA/BMDMA2 */ 91 SIL_INTR_STEERING = (1 << 1), 92 93 SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ 94 SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ 95 SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ 96 SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ 97 SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ 98 SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ 99 SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ 100 SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ 101 SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ 102 SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ 103 104 /* SIEN */ 105 SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ 106 107 /* 108 * Others 109 */ 110 SIL_QUIRK_MOD15WRITE = (1 << 0), 111 SIL_QUIRK_UDMA5MAX = (1 << 1), 112 }; 113 114 static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); 115 #ifdef CONFIG_PM 116 static int sil_pci_device_resume(struct pci_dev *pdev); 117 #endif 118 static void sil_dev_config(struct ata_device *dev); 119 static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); 120 static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val); 121 static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed); 122 static void sil_freeze(struct ata_port *ap); 123 static void sil_thaw(struct ata_port *ap); 124 125 126 static const struct pci_device_id sil_pci_tbl[] = { 127 { PCI_VDEVICE(CMD, 0x3112), sil_3112 }, 128 { PCI_VDEVICE(CMD, 0x0240), sil_3112 }, 129 { PCI_VDEVICE(CMD, 0x3512), sil_3512 }, 130 { PCI_VDEVICE(CMD, 0x3114), sil_3114 }, 131 { PCI_VDEVICE(ATI, 0x436e), sil_3112 }, 132 { PCI_VDEVICE(ATI, 0x4379), sil_3112_no_sata_irq }, 133 { PCI_VDEVICE(ATI, 0x437a), sil_3112_no_sata_irq }, 134 135 { } /* terminate list */ 136 }; 137 138 139 /* TODO firmware versions should be added - eric */ 140 static const struct sil_drivelist { 141 const char *product; 142 unsigned int quirk; 143 } sil_blacklist [] = { 144 { "ST320012AS", SIL_QUIRK_MOD15WRITE }, 145 { "ST330013AS", SIL_QUIRK_MOD15WRITE }, 146 { "ST340017AS", SIL_QUIRK_MOD15WRITE }, 147 { "ST360015AS", SIL_QUIRK_MOD15WRITE }, 148 { "ST380023AS", SIL_QUIRK_MOD15WRITE }, 149 { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, 150 { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, 151 { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, 152 { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, 153 { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, 154 { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, 155 { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, 156 { } 157 }; 158 159 static struct pci_driver sil_pci_driver = { 160 .name = DRV_NAME, 161 .id_table = sil_pci_tbl, 162 .probe = sil_init_one, 163 .remove = ata_pci_remove_one, 164 #ifdef CONFIG_PM 165 .suspend = ata_pci_device_suspend, 166 .resume = sil_pci_device_resume, 167 #endif 168 }; 169 170 static struct scsi_host_template sil_sht = { 171 .module = THIS_MODULE, 172 .name = DRV_NAME, 173 .ioctl = ata_scsi_ioctl, 174 .queuecommand = ata_scsi_queuecmd, 175 .can_queue = ATA_DEF_QUEUE, 176 .this_id = ATA_SHT_THIS_ID, 177 .sg_tablesize = LIBATA_MAX_PRD, 178 .cmd_per_lun = ATA_SHT_CMD_PER_LUN, 179 .emulated = ATA_SHT_EMULATED, 180 .use_clustering = ATA_SHT_USE_CLUSTERING, 181 .proc_name = DRV_NAME, 182 .dma_boundary = ATA_DMA_BOUNDARY, 183 .slave_configure = ata_scsi_slave_config, 184 .slave_destroy = ata_scsi_slave_destroy, 185 .bios_param = ata_std_bios_param, 186 }; 187 188 static const struct ata_port_operations sil_ops = { 189 .dev_config = sil_dev_config, 190 .tf_load = ata_tf_load, 191 .tf_read = ata_tf_read, 192 .check_status = ata_check_status, 193 .exec_command = ata_exec_command, 194 .dev_select = ata_std_dev_select, 195 .set_mode = sil_set_mode, 196 .bmdma_setup = ata_bmdma_setup, 197 .bmdma_start = ata_bmdma_start, 198 .bmdma_stop = ata_bmdma_stop, 199 .bmdma_status = ata_bmdma_status, 200 .qc_prep = ata_qc_prep, 201 .qc_issue = ata_qc_issue_prot, 202 .data_xfer = ata_data_xfer, 203 .freeze = sil_freeze, 204 .thaw = sil_thaw, 205 .error_handler = ata_bmdma_error_handler, 206 .post_internal_cmd = ata_bmdma_post_internal_cmd, 207 .irq_clear = ata_bmdma_irq_clear, 208 .irq_on = ata_irq_on, 209 .scr_read = sil_scr_read, 210 .scr_write = sil_scr_write, 211 .port_start = ata_port_start, 212 }; 213 214 static const struct ata_port_info sil_port_info[] = { 215 /* sil_3112 */ 216 { 217 .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, 218 .link_flags = SIL_DFL_LINK_FLAGS, 219 .pio_mask = 0x1f, /* pio0-4 */ 220 .mwdma_mask = 0x07, /* mwdma0-2 */ 221 .udma_mask = ATA_UDMA5, 222 .port_ops = &sil_ops, 223 }, 224 /* sil_3112_no_sata_irq */ 225 { 226 .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | 227 SIL_FLAG_NO_SATA_IRQ, 228 .link_flags = SIL_DFL_LINK_FLAGS, 229 .pio_mask = 0x1f, /* pio0-4 */ 230 .mwdma_mask = 0x07, /* mwdma0-2 */ 231 .udma_mask = ATA_UDMA5, 232 .port_ops = &sil_ops, 233 }, 234 /* sil_3512 */ 235 { 236 .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, 237 .link_flags = SIL_DFL_LINK_FLAGS, 238 .pio_mask = 0x1f, /* pio0-4 */ 239 .mwdma_mask = 0x07, /* mwdma0-2 */ 240 .udma_mask = ATA_UDMA5, 241 .port_ops = &sil_ops, 242 }, 243 /* sil_3114 */ 244 { 245 .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, 246 .link_flags = SIL_DFL_LINK_FLAGS, 247 .pio_mask = 0x1f, /* pio0-4 */ 248 .mwdma_mask = 0x07, /* mwdma0-2 */ 249 .udma_mask = ATA_UDMA5, 250 .port_ops = &sil_ops, 251 }, 252 }; 253 254 /* per-port register offsets */ 255 /* TODO: we can probably calculate rather than use a table */ 256 static const struct { 257 unsigned long tf; /* ATA taskfile register block */ 258 unsigned long ctl; /* ATA control/altstatus register block */ 259 unsigned long bmdma; /* DMA register block */ 260 unsigned long bmdma2; /* DMA register block #2 */ 261 unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ 262 unsigned long scr; /* SATA control register block */ 263 unsigned long sien; /* SATA Interrupt Enable register */ 264 unsigned long xfer_mode;/* data transfer mode register */ 265 unsigned long sfis_cfg; /* SATA FIS reception config register */ 266 } sil_port[] = { 267 /* port 0 ... */ 268 /* tf ctl bmdma bmdma2 fifo scr sien mode sfis */ 269 { 0x80, 0x8A, 0x0, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, 270 { 0xC0, 0xCA, 0x8, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, 271 { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, 272 { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, 273 /* ... port 3 */ 274 }; 275 276 MODULE_AUTHOR("Jeff Garzik"); 277 MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); 278 MODULE_LICENSE("GPL"); 279 MODULE_DEVICE_TABLE(pci, sil_pci_tbl); 280 MODULE_VERSION(DRV_VERSION); 281 282 static int slow_down; 283 module_param(slow_down, int, 0444); 284 MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); 285 286 287 static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) 288 { 289 u8 cache_line = 0; 290 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); 291 return cache_line; 292 } 293 294 /** 295 * sil_set_mode - wrap set_mode functions 296 * @link: link to set up 297 * @r_failed: returned device when we fail 298 * 299 * Wrap the libata method for device setup as after the setup we need 300 * to inspect the results and do some configuration work 301 */ 302 303 static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed) 304 { 305 struct ata_port *ap = link->ap; 306 void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; 307 void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; 308 struct ata_device *dev; 309 u32 tmp, dev_mode[2] = { }; 310 int rc; 311 312 rc = ata_do_set_mode(link, r_failed); 313 if (rc) 314 return rc; 315 316 ata_link_for_each_dev(dev, link) { 317 if (!ata_dev_enabled(dev)) 318 dev_mode[dev->devno] = 0; /* PIO0/1/2 */ 319 else if (dev->flags & ATA_DFLAG_PIO) 320 dev_mode[dev->devno] = 1; /* PIO3/4 */ 321 else 322 dev_mode[dev->devno] = 3; /* UDMA */ 323 /* value 2 indicates MDMA */ 324 } 325 326 tmp = readl(addr); 327 tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); 328 tmp |= dev_mode[0]; 329 tmp |= (dev_mode[1] << 4); 330 writel(tmp, addr); 331 readl(addr); /* flush */ 332 return 0; 333 } 334 335 static inline void __iomem *sil_scr_addr(struct ata_port *ap, 336 unsigned int sc_reg) 337 { 338 void __iomem *offset = ap->ioaddr.scr_addr; 339 340 switch (sc_reg) { 341 case SCR_STATUS: 342 return offset + 4; 343 case SCR_ERROR: 344 return offset + 8; 345 case SCR_CONTROL: 346 return offset; 347 default: 348 /* do nothing */ 349 break; 350 } 351 352 return NULL; 353 } 354 355 static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) 356 { 357 void __iomem *mmio = sil_scr_addr(ap, sc_reg); 358 359 if (mmio) { 360 *val = readl(mmio); 361 return 0; 362 } 363 return -EINVAL; 364 } 365 366 static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val) 367 { 368 void __iomem *mmio = sil_scr_addr(ap, sc_reg); 369 370 if (mmio) { 371 writel(val, mmio); 372 return 0; 373 } 374 return -EINVAL; 375 } 376 377 static void sil_host_intr(struct ata_port *ap, u32 bmdma2) 378 { 379 struct ata_eh_info *ehi = &ap->link.eh_info; 380 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); 381 u8 status; 382 383 if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { 384 u32 serror; 385 386 /* SIEN doesn't mask SATA IRQs on some 3112s. Those 387 * controllers continue to assert IRQ as long as 388 * SError bits are pending. Clear SError immediately. 389 */ 390 sil_scr_read(ap, SCR_ERROR, &serror); 391 sil_scr_write(ap, SCR_ERROR, serror); 392 393 /* Sometimes spurious interrupts occur, double check 394 * it's PHYRDY CHG. 395 */ 396 if (serror & SERR_PHYRDY_CHG) { 397 ap->link.eh_info.serror |= serror; 398 goto freeze; 399 } 400 401 if (!(bmdma2 & SIL_DMA_COMPLETE)) 402 return; 403 } 404 405 if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { 406 /* this sometimes happens, just clear IRQ */ 407 ata_chk_status(ap); 408 return; 409 } 410 411 /* Check whether we are expecting interrupt in this state */ 412 switch (ap->hsm_task_state) { 413 case HSM_ST_FIRST: 414 /* Some pre-ATAPI-4 devices assert INTRQ 415 * at this state when ready to receive CDB. 416 */ 417 418 /* Check the ATA_DFLAG_CDB_INTR flag is enough here. 419 * The flag was turned on only for atapi devices. No 420 * need to check ata_is_atapi(qc->tf.protocol) again. 421 */ 422 if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) 423 goto err_hsm; 424 break; 425 case HSM_ST_LAST: 426 if (ata_is_dma(qc->tf.protocol)) { 427 /* clear DMA-Start bit */ 428 ap->ops->bmdma_stop(qc); 429 430 if (bmdma2 & SIL_DMA_ERROR) { 431 qc->err_mask |= AC_ERR_HOST_BUS; 432 ap->hsm_task_state = HSM_ST_ERR; 433 } 434 } 435 break; 436 case HSM_ST: 437 break; 438 default: 439 goto err_hsm; 440 } 441 442 /* check main status, clearing INTRQ */ 443 status = ata_chk_status(ap); 444 if (unlikely(status & ATA_BUSY)) 445 goto err_hsm; 446 447 /* ack bmdma irq events */ 448 ata_bmdma_irq_clear(ap); 449 450 /* kick HSM in the ass */ 451 ata_hsm_move(ap, qc, status, 0); 452 453 if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) 454 ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2); 455 456 return; 457 458 err_hsm: 459 qc->err_mask |= AC_ERR_HSM; 460 freeze: 461 ata_port_freeze(ap); 462 } 463 464 static irqreturn_t sil_interrupt(int irq, void *dev_instance) 465 { 466 struct ata_host *host = dev_instance; 467 void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; 468 int handled = 0; 469 int i; 470 471 spin_lock(&host->lock); 472 473 for (i = 0; i < host->n_ports; i++) { 474 struct ata_port *ap = host->ports[i]; 475 u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); 476 477 if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) 478 continue; 479 480 /* turn off SATA_IRQ if not supported */ 481 if (ap->flags & SIL_FLAG_NO_SATA_IRQ) 482 bmdma2 &= ~SIL_DMA_SATA_IRQ; 483 484 if (bmdma2 == 0xffffffff || 485 !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) 486 continue; 487 488 sil_host_intr(ap, bmdma2); 489 handled = 1; 490 } 491 492 spin_unlock(&host->lock); 493 494 return IRQ_RETVAL(handled); 495 } 496 497 static void sil_freeze(struct ata_port *ap) 498 { 499 void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; 500 u32 tmp; 501 502 /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ 503 writel(0, mmio_base + sil_port[ap->port_no].sien); 504 505 /* plug IRQ */ 506 tmp = readl(mmio_base + SIL_SYSCFG); 507 tmp |= SIL_MASK_IDE0_INT << ap->port_no; 508 writel(tmp, mmio_base + SIL_SYSCFG); 509 readl(mmio_base + SIL_SYSCFG); /* flush */ 510 } 511 512 static void sil_thaw(struct ata_port *ap) 513 { 514 void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; 515 u32 tmp; 516 517 /* clear IRQ */ 518 ata_chk_status(ap); 519 ata_bmdma_irq_clear(ap); 520 521 /* turn on SATA IRQ if supported */ 522 if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) 523 writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); 524 525 /* turn on IRQ */ 526 tmp = readl(mmio_base + SIL_SYSCFG); 527 tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); 528 writel(tmp, mmio_base + SIL_SYSCFG); 529 } 530 531 /** 532 * sil_dev_config - Apply device/host-specific errata fixups 533 * @dev: Device to be examined 534 * 535 * After the IDENTIFY [PACKET] DEVICE step is complete, and a 536 * device is known to be present, this function is called. 537 * We apply two errata fixups which are specific to Silicon Image, 538 * a Seagate and a Maxtor fixup. 539 * 540 * For certain Seagate devices, we must limit the maximum sectors 541 * to under 8K. 542 * 543 * For certain Maxtor devices, we must not program the drive 544 * beyond udma5. 545 * 546 * Both fixups are unfairly pessimistic. As soon as I get more 547 * information on these errata, I will create a more exhaustive 548 * list, and apply the fixups to only the specific 549 * devices/hosts/firmwares that need it. 550 * 551 * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted 552 * The Maxtor quirk is in the blacklist, but I'm keeping the original 553 * pessimistic fix for the following reasons... 554 * - There seems to be less info on it, only one device gleaned off the 555 * Windows driver, maybe only one is affected. More info would be greatly 556 * appreciated. 557 * - But then again UDMA5 is hardly anything to complain about 558 */ 559 static void sil_dev_config(struct ata_device *dev) 560 { 561 struct ata_port *ap = dev->link->ap; 562 int print_info = ap->link.eh_context.i.flags & ATA_EHI_PRINTINFO; 563 unsigned int n, quirks = 0; 564 unsigned char model_num[ATA_ID_PROD_LEN + 1]; 565 566 ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); 567 568 for (n = 0; sil_blacklist[n].product; n++) 569 if (!strcmp(sil_blacklist[n].product, model_num)) { 570 quirks = sil_blacklist[n].quirk; 571 break; 572 } 573 574 /* limit requests to 15 sectors */ 575 if (slow_down || 576 ((ap->flags & SIL_FLAG_MOD15WRITE) && 577 (quirks & SIL_QUIRK_MOD15WRITE))) { 578 if (print_info) 579 ata_dev_printk(dev, KERN_INFO, "applying Seagate " 580 "errata fix (mod15write workaround)\n"); 581 dev->max_sectors = 15; 582 return; 583 } 584 585 /* limit to udma5 */ 586 if (quirks & SIL_QUIRK_UDMA5MAX) { 587 if (print_info) 588 ata_dev_printk(dev, KERN_INFO, "applying Maxtor " 589 "errata fix %s\n", model_num); 590 dev->udma_mask &= ATA_UDMA5; 591 return; 592 } 593 } 594 595 static void sil_init_controller(struct ata_host *host) 596 { 597 struct pci_dev *pdev = to_pci_dev(host->dev); 598 void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; 599 u8 cls; 600 u32 tmp; 601 int i; 602 603 /* Initialize FIFO PCI bus arbitration */ 604 cls = sil_get_device_cache_line(pdev); 605 if (cls) { 606 cls >>= 3; 607 cls++; /* cls = (line_size/8)+1 */ 608 for (i = 0; i < host->n_ports; i++) 609 writew(cls << 8 | cls, 610 mmio_base + sil_port[i].fifo_cfg); 611 } else 612 dev_printk(KERN_WARNING, &pdev->dev, 613 "cache line size not set. Driver may not function\n"); 614 615 /* Apply R_ERR on DMA activate FIS errata workaround */ 616 if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) { 617 int cnt; 618 619 for (i = 0, cnt = 0; i < host->n_ports; i++) { 620 tmp = readl(mmio_base + sil_port[i].sfis_cfg); 621 if ((tmp & 0x3) != 0x01) 622 continue; 623 if (!cnt) 624 dev_printk(KERN_INFO, &pdev->dev, 625 "Applying R_ERR on DMA activate " 626 "FIS errata fix\n"); 627 writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); 628 cnt++; 629 } 630 } 631 632 if (host->n_ports == 4) { 633 /* flip the magic "make 4 ports work" bit */ 634 tmp = readl(mmio_base + sil_port[2].bmdma); 635 if ((tmp & SIL_INTR_STEERING) == 0) 636 writel(tmp | SIL_INTR_STEERING, 637 mmio_base + sil_port[2].bmdma); 638 } 639 } 640 641 static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 642 { 643 static int printed_version; 644 int board_id = ent->driver_data; 645 const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL }; 646 struct ata_host *host; 647 void __iomem *mmio_base; 648 int n_ports, rc; 649 unsigned int i; 650 651 if (!printed_version++) 652 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); 653 654 /* allocate host */ 655 n_ports = 2; 656 if (board_id == sil_3114) 657 n_ports = 4; 658 659 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); 660 if (!host) 661 return -ENOMEM; 662 663 /* acquire resources and fill host */ 664 rc = pcim_enable_device(pdev); 665 if (rc) 666 return rc; 667 668 rc = pcim_iomap_regions(pdev, 1 << SIL_MMIO_BAR, DRV_NAME); 669 if (rc == -EBUSY) 670 pcim_pin_device(pdev); 671 if (rc) 672 return rc; 673 host->iomap = pcim_iomap_table(pdev); 674 675 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); 676 if (rc) 677 return rc; 678 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); 679 if (rc) 680 return rc; 681 682 mmio_base = host->iomap[SIL_MMIO_BAR]; 683 684 for (i = 0; i < host->n_ports; i++) { 685 struct ata_port *ap = host->ports[i]; 686 struct ata_ioports *ioaddr = &ap->ioaddr; 687 688 ioaddr->cmd_addr = mmio_base + sil_port[i].tf; 689 ioaddr->altstatus_addr = 690 ioaddr->ctl_addr = mmio_base + sil_port[i].ctl; 691 ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; 692 ioaddr->scr_addr = mmio_base + sil_port[i].scr; 693 ata_std_ports(ioaddr); 694 695 ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio"); 696 ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf"); 697 } 698 699 /* initialize and activate */ 700 sil_init_controller(host); 701 702 pci_set_master(pdev); 703 return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED, 704 &sil_sht); 705 } 706 707 #ifdef CONFIG_PM 708 static int sil_pci_device_resume(struct pci_dev *pdev) 709 { 710 struct ata_host *host = dev_get_drvdata(&pdev->dev); 711 int rc; 712 713 rc = ata_pci_device_do_resume(pdev); 714 if (rc) 715 return rc; 716 717 sil_init_controller(host); 718 ata_host_resume(host); 719 720 return 0; 721 } 722 #endif 723 724 static int __init sil_init(void) 725 { 726 return pci_register_driver(&sil_pci_driver); 727 } 728 729 static void __exit sil_exit(void) 730 { 731 pci_unregister_driver(&sil_pci_driver); 732 } 733 734 735 module_init(sil_init); 736 module_exit(sil_exit); 737