1 /* 2 * sata_inic162x.c - Driver for Initio 162x SATA controllers 3 * 4 * Copyright 2006 SUSE Linux Products GmbH 5 * Copyright 2006 Tejun Heo <teheo@novell.com> 6 * 7 * This file is released under GPL v2. 8 * 9 * **** WARNING **** 10 * 11 * This driver never worked properly and unfortunately data corruption is 12 * relatively common. There isn't anyone working on the driver and there's 13 * no support from the vendor. Do not use this driver in any production 14 * environment. 15 * 16 * http://thread.gmane.org/gmane.linux.debian.devel.bugs.rc/378525/focus=54491 17 * https://bugzilla.kernel.org/show_bug.cgi?id=60565 18 * 19 * ***************** 20 * 21 * This controller is eccentric and easily locks up if something isn't 22 * right. Documentation is available at initio's website but it only 23 * documents registers (not programming model). 24 * 25 * This driver has interesting history. The first version was written 26 * from the documentation and a 2.4 IDE driver posted on a Taiwan 27 * company, which didn't use any IDMA features and couldn't handle 28 * LBA48. The resulting driver couldn't handle LBA48 devices either 29 * making it pretty useless. 30 * 31 * After a while, initio picked the driver up, renamed it to 32 * sata_initio162x, updated it to use IDMA for ATA DMA commands and 33 * posted it on their website. It only used ATA_PROT_DMA for IDMA and 34 * attaching both devices and issuing IDMA and !IDMA commands 35 * simultaneously broke it due to PIRQ masking interaction but it did 36 * show how to use the IDMA (ADMA + some initio specific twists) 37 * engine. 38 * 39 * Then, I picked up their changes again and here's the usable driver 40 * which uses IDMA for everything. Everything works now including 41 * LBA48, CD/DVD burning, suspend/resume and hotplug. There are some 42 * issues tho. Result Tf is not resported properly, NCQ isn't 43 * supported yet and CD/DVD writing works with DMA assisted PIO 44 * protocol (which, for native SATA devices, shouldn't cause any 45 * noticeable difference). 46 * 47 * Anyways, so, here's finally a working driver for inic162x. Enjoy! 48 * 49 * initio: If you guys wanna improve the driver regarding result TF 50 * access and other stuff, please feel free to contact me. I'll be 51 * happy to assist. 52 */ 53 54 #include <linux/gfp.h> 55 #include <linux/kernel.h> 56 #include <linux/module.h> 57 #include <linux/pci.h> 58 #include <scsi/scsi_host.h> 59 #include <linux/libata.h> 60 #include <linux/blkdev.h> 61 #include <scsi/scsi_device.h> 62 63 #define DRV_NAME "sata_inic162x" 64 #define DRV_VERSION "0.4" 65 66 enum { 67 MMIO_BAR_PCI = 5, 68 MMIO_BAR_CARDBUS = 1, 69 70 NR_PORTS = 2, 71 72 IDMA_CPB_TBL_SIZE = 4 * 32, 73 74 INIC_DMA_BOUNDARY = 0xffffff, 75 76 HOST_ACTRL = 0x08, 77 HOST_CTL = 0x7c, 78 HOST_STAT = 0x7e, 79 HOST_IRQ_STAT = 0xbc, 80 HOST_IRQ_MASK = 0xbe, 81 82 PORT_SIZE = 0x40, 83 84 /* registers for ATA TF operation */ 85 PORT_TF_DATA = 0x00, 86 PORT_TF_FEATURE = 0x01, 87 PORT_TF_NSECT = 0x02, 88 PORT_TF_LBAL = 0x03, 89 PORT_TF_LBAM = 0x04, 90 PORT_TF_LBAH = 0x05, 91 PORT_TF_DEVICE = 0x06, 92 PORT_TF_COMMAND = 0x07, 93 PORT_TF_ALT_STAT = 0x08, 94 PORT_IRQ_STAT = 0x09, 95 PORT_IRQ_MASK = 0x0a, 96 PORT_PRD_CTL = 0x0b, 97 PORT_PRD_ADDR = 0x0c, 98 PORT_PRD_XFERLEN = 0x10, 99 PORT_CPB_CPBLAR = 0x18, 100 PORT_CPB_PTQFIFO = 0x1c, 101 102 /* IDMA register */ 103 PORT_IDMA_CTL = 0x14, 104 PORT_IDMA_STAT = 0x16, 105 106 PORT_RPQ_FIFO = 0x1e, 107 PORT_RPQ_CNT = 0x1f, 108 109 PORT_SCR = 0x20, 110 111 /* HOST_CTL bits */ 112 HCTL_LEDEN = (1 << 3), /* enable LED operation */ 113 HCTL_IRQOFF = (1 << 8), /* global IRQ off */ 114 HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */ 115 HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/ 116 HCTL_PWRDWN = (1 << 12), /* power down PHYs */ 117 HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */ 118 HCTL_RPGSEL = (1 << 15), /* register page select */ 119 120 HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST | 121 HCTL_RPGSEL, 122 123 /* HOST_IRQ_(STAT|MASK) bits */ 124 HIRQ_PORT0 = (1 << 0), 125 HIRQ_PORT1 = (1 << 1), 126 HIRQ_SOFT = (1 << 14), 127 HIRQ_GLOBAL = (1 << 15), /* STAT only */ 128 129 /* PORT_IRQ_(STAT|MASK) bits */ 130 PIRQ_OFFLINE = (1 << 0), /* device unplugged */ 131 PIRQ_ONLINE = (1 << 1), /* device plugged */ 132 PIRQ_COMPLETE = (1 << 2), /* completion interrupt */ 133 PIRQ_FATAL = (1 << 3), /* fatal error */ 134 PIRQ_ATA = (1 << 4), /* ATA interrupt */ 135 PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */ 136 PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */ 137 138 PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL, 139 PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA, 140 PIRQ_MASK_FREEZE = 0xff, 141 142 /* PORT_PRD_CTL bits */ 143 PRD_CTL_START = (1 << 0), 144 PRD_CTL_WR = (1 << 3), 145 PRD_CTL_DMAEN = (1 << 7), /* DMA enable */ 146 147 /* PORT_IDMA_CTL bits */ 148 IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */ 149 IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */ 150 IDMA_CTL_GO = (1 << 7), /* IDMA mode go */ 151 IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */ 152 153 /* PORT_IDMA_STAT bits */ 154 IDMA_STAT_PERR = (1 << 0), /* PCI ERROR MODE */ 155 IDMA_STAT_CPBERR = (1 << 1), /* ADMA CPB error */ 156 IDMA_STAT_LGCY = (1 << 3), /* ADMA legacy */ 157 IDMA_STAT_UIRQ = (1 << 4), /* ADMA unsolicited irq */ 158 IDMA_STAT_STPD = (1 << 5), /* ADMA stopped */ 159 IDMA_STAT_PSD = (1 << 6), /* ADMA pause */ 160 IDMA_STAT_DONE = (1 << 7), /* ADMA done */ 161 162 IDMA_STAT_ERR = IDMA_STAT_PERR | IDMA_STAT_CPBERR, 163 164 /* CPB Control Flags*/ 165 CPB_CTL_VALID = (1 << 0), /* CPB valid */ 166 CPB_CTL_QUEUED = (1 << 1), /* queued command */ 167 CPB_CTL_DATA = (1 << 2), /* data, rsvd in datasheet */ 168 CPB_CTL_IEN = (1 << 3), /* PCI interrupt enable */ 169 CPB_CTL_DEVDIR = (1 << 4), /* device direction control */ 170 171 /* CPB Response Flags */ 172 CPB_RESP_DONE = (1 << 0), /* ATA command complete */ 173 CPB_RESP_REL = (1 << 1), /* ATA release */ 174 CPB_RESP_IGNORED = (1 << 2), /* CPB ignored */ 175 CPB_RESP_ATA_ERR = (1 << 3), /* ATA command error */ 176 CPB_RESP_SPURIOUS = (1 << 4), /* ATA spurious interrupt error */ 177 CPB_RESP_UNDERFLOW = (1 << 5), /* APRD deficiency length error */ 178 CPB_RESP_OVERFLOW = (1 << 6), /* APRD exccess length error */ 179 CPB_RESP_CPB_ERR = (1 << 7), /* CPB error flag */ 180 181 /* PRD Control Flags */ 182 PRD_DRAIN = (1 << 1), /* ignore data excess */ 183 PRD_CDB = (1 << 2), /* atapi packet command pointer */ 184 PRD_DIRECT_INTR = (1 << 3), /* direct interrupt */ 185 PRD_DMA = (1 << 4), /* data transfer method */ 186 PRD_WRITE = (1 << 5), /* data dir, rsvd in datasheet */ 187 PRD_IOM = (1 << 6), /* io/memory transfer */ 188 PRD_END = (1 << 7), /* APRD chain end */ 189 }; 190 191 /* Comman Parameter Block */ 192 struct inic_cpb { 193 u8 resp_flags; /* Response Flags */ 194 u8 error; /* ATA Error */ 195 u8 status; /* ATA Status */ 196 u8 ctl_flags; /* Control Flags */ 197 __le32 len; /* Total Transfer Length */ 198 __le32 prd; /* First PRD pointer */ 199 u8 rsvd[4]; 200 /* 16 bytes */ 201 u8 feature; /* ATA Feature */ 202 u8 hob_feature; /* ATA Ex. Feature */ 203 u8 device; /* ATA Device/Head */ 204 u8 mirctl; /* Mirror Control */ 205 u8 nsect; /* ATA Sector Count */ 206 u8 hob_nsect; /* ATA Ex. Sector Count */ 207 u8 lbal; /* ATA Sector Number */ 208 u8 hob_lbal; /* ATA Ex. Sector Number */ 209 u8 lbam; /* ATA Cylinder Low */ 210 u8 hob_lbam; /* ATA Ex. Cylinder Low */ 211 u8 lbah; /* ATA Cylinder High */ 212 u8 hob_lbah; /* ATA Ex. Cylinder High */ 213 u8 command; /* ATA Command */ 214 u8 ctl; /* ATA Control */ 215 u8 slave_error; /* Slave ATA Error */ 216 u8 slave_status; /* Slave ATA Status */ 217 /* 32 bytes */ 218 } __packed; 219 220 /* Physical Region Descriptor */ 221 struct inic_prd { 222 __le32 mad; /* Physical Memory Address */ 223 __le16 len; /* Transfer Length */ 224 u8 rsvd; 225 u8 flags; /* Control Flags */ 226 } __packed; 227 228 struct inic_pkt { 229 struct inic_cpb cpb; 230 struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */ 231 u8 cdb[ATAPI_CDB_LEN]; 232 } __packed; 233 234 struct inic_host_priv { 235 void __iomem *mmio_base; 236 u16 cached_hctl; 237 }; 238 239 struct inic_port_priv { 240 struct inic_pkt *pkt; 241 dma_addr_t pkt_dma; 242 u32 *cpb_tbl; 243 dma_addr_t cpb_tbl_dma; 244 }; 245 246 static struct scsi_host_template inic_sht = { 247 ATA_BASE_SHT(DRV_NAME), 248 .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */ 249 .dma_boundary = INIC_DMA_BOUNDARY, 250 }; 251 252 static const int scr_map[] = { 253 [SCR_STATUS] = 0, 254 [SCR_ERROR] = 1, 255 [SCR_CONTROL] = 2, 256 }; 257 258 static void __iomem *inic_port_base(struct ata_port *ap) 259 { 260 struct inic_host_priv *hpriv = ap->host->private_data; 261 262 return hpriv->mmio_base + ap->port_no * PORT_SIZE; 263 } 264 265 static void inic_reset_port(void __iomem *port_base) 266 { 267 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; 268 269 /* stop IDMA engine */ 270 readw(idma_ctl); /* flush */ 271 msleep(1); 272 273 /* mask IRQ and assert reset */ 274 writew(IDMA_CTL_RST_IDMA, idma_ctl); 275 readw(idma_ctl); /* flush */ 276 msleep(1); 277 278 /* release reset */ 279 writew(0, idma_ctl); 280 281 /* clear irq */ 282 writeb(0xff, port_base + PORT_IRQ_STAT); 283 } 284 285 static int inic_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val) 286 { 287 void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; 288 289 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) 290 return -EINVAL; 291 292 *val = readl(scr_addr + scr_map[sc_reg] * 4); 293 294 /* this controller has stuck DIAG.N, ignore it */ 295 if (sc_reg == SCR_ERROR) 296 *val &= ~SERR_PHYRDY_CHG; 297 return 0; 298 } 299 300 static int inic_scr_write(struct ata_link *link, unsigned sc_reg, u32 val) 301 { 302 void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; 303 304 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) 305 return -EINVAL; 306 307 writel(val, scr_addr + scr_map[sc_reg] * 4); 308 return 0; 309 } 310 311 static void inic_stop_idma(struct ata_port *ap) 312 { 313 void __iomem *port_base = inic_port_base(ap); 314 315 readb(port_base + PORT_RPQ_FIFO); 316 readb(port_base + PORT_RPQ_CNT); 317 writew(0, port_base + PORT_IDMA_CTL); 318 } 319 320 static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat) 321 { 322 struct ata_eh_info *ehi = &ap->link.eh_info; 323 struct inic_port_priv *pp = ap->private_data; 324 struct inic_cpb *cpb = &pp->pkt->cpb; 325 bool freeze = false; 326 327 ata_ehi_clear_desc(ehi); 328 ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x", 329 irq_stat, idma_stat); 330 331 inic_stop_idma(ap); 332 333 if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) { 334 ata_ehi_push_desc(ehi, "hotplug"); 335 ata_ehi_hotplugged(ehi); 336 freeze = true; 337 } 338 339 if (idma_stat & IDMA_STAT_PERR) { 340 ata_ehi_push_desc(ehi, "PCI error"); 341 freeze = true; 342 } 343 344 if (idma_stat & IDMA_STAT_CPBERR) { 345 ata_ehi_push_desc(ehi, "CPB error"); 346 347 if (cpb->resp_flags & CPB_RESP_IGNORED) { 348 __ata_ehi_push_desc(ehi, " ignored"); 349 ehi->err_mask |= AC_ERR_INVALID; 350 freeze = true; 351 } 352 353 if (cpb->resp_flags & CPB_RESP_ATA_ERR) 354 ehi->err_mask |= AC_ERR_DEV; 355 356 if (cpb->resp_flags & CPB_RESP_SPURIOUS) { 357 __ata_ehi_push_desc(ehi, " spurious-intr"); 358 ehi->err_mask |= AC_ERR_HSM; 359 freeze = true; 360 } 361 362 if (cpb->resp_flags & 363 (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) { 364 __ata_ehi_push_desc(ehi, " data-over/underflow"); 365 ehi->err_mask |= AC_ERR_HSM; 366 freeze = true; 367 } 368 } 369 370 if (freeze) 371 ata_port_freeze(ap); 372 else 373 ata_port_abort(ap); 374 } 375 376 static void inic_host_intr(struct ata_port *ap) 377 { 378 void __iomem *port_base = inic_port_base(ap); 379 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); 380 u8 irq_stat; 381 u16 idma_stat; 382 383 /* read and clear IRQ status */ 384 irq_stat = readb(port_base + PORT_IRQ_STAT); 385 writeb(irq_stat, port_base + PORT_IRQ_STAT); 386 idma_stat = readw(port_base + PORT_IDMA_STAT); 387 388 if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR))) 389 inic_host_err_intr(ap, irq_stat, idma_stat); 390 391 if (unlikely(!qc)) 392 goto spurious; 393 394 if (likely(idma_stat & IDMA_STAT_DONE)) { 395 inic_stop_idma(ap); 396 397 /* Depending on circumstances, device error 398 * isn't reported by IDMA, check it explicitly. 399 */ 400 if (unlikely(readb(port_base + PORT_TF_COMMAND) & 401 (ATA_DF | ATA_ERR))) 402 qc->err_mask |= AC_ERR_DEV; 403 404 ata_qc_complete(qc); 405 return; 406 } 407 408 spurious: 409 ata_port_warn(ap, "unhandled interrupt: cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n", 410 qc ? qc->tf.command : 0xff, irq_stat, idma_stat); 411 } 412 413 static irqreturn_t inic_interrupt(int irq, void *dev_instance) 414 { 415 struct ata_host *host = dev_instance; 416 struct inic_host_priv *hpriv = host->private_data; 417 u16 host_irq_stat; 418 int i, handled = 0; 419 420 host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT); 421 422 if (unlikely(!(host_irq_stat & HIRQ_GLOBAL))) 423 goto out; 424 425 spin_lock(&host->lock); 426 427 for (i = 0; i < NR_PORTS; i++) 428 if (host_irq_stat & (HIRQ_PORT0 << i)) { 429 inic_host_intr(host->ports[i]); 430 handled++; 431 } 432 433 spin_unlock(&host->lock); 434 435 out: 436 return IRQ_RETVAL(handled); 437 } 438 439 static int inic_check_atapi_dma(struct ata_queued_cmd *qc) 440 { 441 /* For some reason ATAPI_PROT_DMA doesn't work for some 442 * commands including writes and other misc ops. Use PIO 443 * protocol instead, which BTW is driven by the DMA engine 444 * anyway, so it shouldn't make much difference for native 445 * SATA devices. 446 */ 447 if (atapi_cmd_type(qc->cdb[0]) == READ) 448 return 0; 449 return 1; 450 } 451 452 static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc) 453 { 454 struct scatterlist *sg; 455 unsigned int si; 456 u8 flags = 0; 457 458 if (qc->tf.flags & ATA_TFLAG_WRITE) 459 flags |= PRD_WRITE; 460 461 if (ata_is_dma(qc->tf.protocol)) 462 flags |= PRD_DMA; 463 464 for_each_sg(qc->sg, sg, qc->n_elem, si) { 465 prd->mad = cpu_to_le32(sg_dma_address(sg)); 466 prd->len = cpu_to_le16(sg_dma_len(sg)); 467 prd->flags = flags; 468 prd++; 469 } 470 471 WARN_ON(!si); 472 prd[-1].flags |= PRD_END; 473 } 474 475 static void inic_qc_prep(struct ata_queued_cmd *qc) 476 { 477 struct inic_port_priv *pp = qc->ap->private_data; 478 struct inic_pkt *pkt = pp->pkt; 479 struct inic_cpb *cpb = &pkt->cpb; 480 struct inic_prd *prd = pkt->prd; 481 bool is_atapi = ata_is_atapi(qc->tf.protocol); 482 bool is_data = ata_is_data(qc->tf.protocol); 483 unsigned int cdb_len = 0; 484 485 VPRINTK("ENTER\n"); 486 487 if (is_atapi) 488 cdb_len = qc->dev->cdb_len; 489 490 /* prepare packet, based on initio driver */ 491 memset(pkt, 0, sizeof(struct inic_pkt)); 492 493 cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN; 494 if (is_atapi || is_data) 495 cpb->ctl_flags |= CPB_CTL_DATA; 496 497 cpb->len = cpu_to_le32(qc->nbytes + cdb_len); 498 cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd)); 499 500 cpb->device = qc->tf.device; 501 cpb->feature = qc->tf.feature; 502 cpb->nsect = qc->tf.nsect; 503 cpb->lbal = qc->tf.lbal; 504 cpb->lbam = qc->tf.lbam; 505 cpb->lbah = qc->tf.lbah; 506 507 if (qc->tf.flags & ATA_TFLAG_LBA48) { 508 cpb->hob_feature = qc->tf.hob_feature; 509 cpb->hob_nsect = qc->tf.hob_nsect; 510 cpb->hob_lbal = qc->tf.hob_lbal; 511 cpb->hob_lbam = qc->tf.hob_lbam; 512 cpb->hob_lbah = qc->tf.hob_lbah; 513 } 514 515 cpb->command = qc->tf.command; 516 /* don't load ctl - dunno why. it's like that in the initio driver */ 517 518 /* setup PRD for CDB */ 519 if (is_atapi) { 520 memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN); 521 prd->mad = cpu_to_le32(pp->pkt_dma + 522 offsetof(struct inic_pkt, cdb)); 523 prd->len = cpu_to_le16(cdb_len); 524 prd->flags = PRD_CDB | PRD_WRITE; 525 if (!is_data) 526 prd->flags |= PRD_END; 527 prd++; 528 } 529 530 /* setup sg table */ 531 if (is_data) 532 inic_fill_sg(prd, qc); 533 534 pp->cpb_tbl[0] = pp->pkt_dma; 535 } 536 537 static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) 538 { 539 struct ata_port *ap = qc->ap; 540 void __iomem *port_base = inic_port_base(ap); 541 542 /* fire up the ADMA engine */ 543 writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL); 544 writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL); 545 writeb(0, port_base + PORT_CPB_PTQFIFO); 546 547 return 0; 548 } 549 550 static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf) 551 { 552 void __iomem *port_base = inic_port_base(ap); 553 554 tf->feature = readb(port_base + PORT_TF_FEATURE); 555 tf->nsect = readb(port_base + PORT_TF_NSECT); 556 tf->lbal = readb(port_base + PORT_TF_LBAL); 557 tf->lbam = readb(port_base + PORT_TF_LBAM); 558 tf->lbah = readb(port_base + PORT_TF_LBAH); 559 tf->device = readb(port_base + PORT_TF_DEVICE); 560 tf->command = readb(port_base + PORT_TF_COMMAND); 561 } 562 563 static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc) 564 { 565 struct ata_taskfile *rtf = &qc->result_tf; 566 struct ata_taskfile tf; 567 568 /* FIXME: Except for status and error, result TF access 569 * doesn't work. I tried reading from BAR0/2, CPB and BAR5. 570 * None works regardless of which command interface is used. 571 * For now return true iff status indicates device error. 572 * This means that we're reporting bogus sector for RW 573 * failures. Eeekk.... 574 */ 575 inic_tf_read(qc->ap, &tf); 576 577 if (!(tf.command & ATA_ERR)) 578 return false; 579 580 rtf->command = tf.command; 581 rtf->feature = tf.feature; 582 return true; 583 } 584 585 static void inic_freeze(struct ata_port *ap) 586 { 587 void __iomem *port_base = inic_port_base(ap); 588 589 writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK); 590 writeb(0xff, port_base + PORT_IRQ_STAT); 591 } 592 593 static void inic_thaw(struct ata_port *ap) 594 { 595 void __iomem *port_base = inic_port_base(ap); 596 597 writeb(0xff, port_base + PORT_IRQ_STAT); 598 writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK); 599 } 600 601 static int inic_check_ready(struct ata_link *link) 602 { 603 void __iomem *port_base = inic_port_base(link->ap); 604 605 return ata_check_ready(readb(port_base + PORT_TF_COMMAND)); 606 } 607 608 /* 609 * SRST and SControl hardreset don't give valid signature on this 610 * controller. Only controller specific hardreset mechanism works. 611 */ 612 static int inic_hardreset(struct ata_link *link, unsigned int *class, 613 unsigned long deadline) 614 { 615 struct ata_port *ap = link->ap; 616 void __iomem *port_base = inic_port_base(ap); 617 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; 618 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); 619 int rc; 620 621 /* hammer it into sane state */ 622 inic_reset_port(port_base); 623 624 writew(IDMA_CTL_RST_ATA, idma_ctl); 625 readw(idma_ctl); /* flush */ 626 ata_msleep(ap, 1); 627 writew(0, idma_ctl); 628 629 rc = sata_link_resume(link, timing, deadline); 630 if (rc) { 631 ata_link_warn(link, 632 "failed to resume link after reset (errno=%d)\n", 633 rc); 634 return rc; 635 } 636 637 *class = ATA_DEV_NONE; 638 if (ata_link_online(link)) { 639 struct ata_taskfile tf; 640 641 /* wait for link to become ready */ 642 rc = ata_wait_after_reset(link, deadline, inic_check_ready); 643 /* link occupied, -ENODEV too is an error */ 644 if (rc) { 645 ata_link_warn(link, 646 "device not ready after hardreset (errno=%d)\n", 647 rc); 648 return rc; 649 } 650 651 inic_tf_read(ap, &tf); 652 *class = ata_dev_classify(&tf); 653 } 654 655 return 0; 656 } 657 658 static void inic_error_handler(struct ata_port *ap) 659 { 660 void __iomem *port_base = inic_port_base(ap); 661 662 inic_reset_port(port_base); 663 ata_std_error_handler(ap); 664 } 665 666 static void inic_post_internal_cmd(struct ata_queued_cmd *qc) 667 { 668 /* make DMA engine forget about the failed command */ 669 if (qc->flags & ATA_QCFLAG_FAILED) 670 inic_reset_port(inic_port_base(qc->ap)); 671 } 672 673 static void init_port(struct ata_port *ap) 674 { 675 void __iomem *port_base = inic_port_base(ap); 676 struct inic_port_priv *pp = ap->private_data; 677 678 /* clear packet and CPB table */ 679 memset(pp->pkt, 0, sizeof(struct inic_pkt)); 680 memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE); 681 682 /* setup CPB lookup table addresses */ 683 writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR); 684 } 685 686 static int inic_port_resume(struct ata_port *ap) 687 { 688 init_port(ap); 689 return 0; 690 } 691 692 static int inic_port_start(struct ata_port *ap) 693 { 694 struct device *dev = ap->host->dev; 695 struct inic_port_priv *pp; 696 697 /* alloc and initialize private data */ 698 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); 699 if (!pp) 700 return -ENOMEM; 701 ap->private_data = pp; 702 703 /* Alloc resources */ 704 pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt), 705 &pp->pkt_dma, GFP_KERNEL); 706 if (!pp->pkt) 707 return -ENOMEM; 708 709 pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE, 710 &pp->cpb_tbl_dma, GFP_KERNEL); 711 if (!pp->cpb_tbl) 712 return -ENOMEM; 713 714 init_port(ap); 715 716 return 0; 717 } 718 719 static struct ata_port_operations inic_port_ops = { 720 .inherits = &sata_port_ops, 721 722 .check_atapi_dma = inic_check_atapi_dma, 723 .qc_prep = inic_qc_prep, 724 .qc_issue = inic_qc_issue, 725 .qc_fill_rtf = inic_qc_fill_rtf, 726 727 .freeze = inic_freeze, 728 .thaw = inic_thaw, 729 .hardreset = inic_hardreset, 730 .error_handler = inic_error_handler, 731 .post_internal_cmd = inic_post_internal_cmd, 732 733 .scr_read = inic_scr_read, 734 .scr_write = inic_scr_write, 735 736 .port_resume = inic_port_resume, 737 .port_start = inic_port_start, 738 }; 739 740 static const struct ata_port_info inic_port_info = { 741 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, 742 .pio_mask = ATA_PIO4, 743 .mwdma_mask = ATA_MWDMA2, 744 .udma_mask = ATA_UDMA6, 745 .port_ops = &inic_port_ops 746 }; 747 748 static int init_controller(void __iomem *mmio_base, u16 hctl) 749 { 750 int i; 751 u16 val; 752 753 hctl &= ~HCTL_KNOWN_BITS; 754 755 /* Soft reset whole controller. Spec says reset duration is 3 756 * PCI clocks, be generous and give it 10ms. 757 */ 758 writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL); 759 readw(mmio_base + HOST_CTL); /* flush */ 760 761 for (i = 0; i < 10; i++) { 762 msleep(1); 763 val = readw(mmio_base + HOST_CTL); 764 if (!(val & HCTL_SOFTRST)) 765 break; 766 } 767 768 if (val & HCTL_SOFTRST) 769 return -EIO; 770 771 /* mask all interrupts and reset ports */ 772 for (i = 0; i < NR_PORTS; i++) { 773 void __iomem *port_base = mmio_base + i * PORT_SIZE; 774 775 writeb(0xff, port_base + PORT_IRQ_MASK); 776 inic_reset_port(port_base); 777 } 778 779 /* port IRQ is masked now, unmask global IRQ */ 780 writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL); 781 val = readw(mmio_base + HOST_IRQ_MASK); 782 val &= ~(HIRQ_PORT0 | HIRQ_PORT1); 783 writew(val, mmio_base + HOST_IRQ_MASK); 784 785 return 0; 786 } 787 788 #ifdef CONFIG_PM_SLEEP 789 static int inic_pci_device_resume(struct pci_dev *pdev) 790 { 791 struct ata_host *host = pci_get_drvdata(pdev); 792 struct inic_host_priv *hpriv = host->private_data; 793 int rc; 794 795 rc = ata_pci_device_do_resume(pdev); 796 if (rc) 797 return rc; 798 799 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { 800 rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); 801 if (rc) 802 return rc; 803 } 804 805 ata_host_resume(host); 806 807 return 0; 808 } 809 #endif 810 811 static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 812 { 813 const struct ata_port_info *ppi[] = { &inic_port_info, NULL }; 814 struct ata_host *host; 815 struct inic_host_priv *hpriv; 816 void __iomem * const *iomap; 817 int mmio_bar; 818 int i, rc; 819 820 ata_print_version_once(&pdev->dev, DRV_VERSION); 821 822 dev_alert(&pdev->dev, "inic162x support is broken with common data corruption issues and will be disabled by default, contact linux-ide@vger.kernel.org if in production use\n"); 823 824 /* alloc host */ 825 host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS); 826 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); 827 if (!host || !hpriv) 828 return -ENOMEM; 829 830 host->private_data = hpriv; 831 832 /* Acquire resources and fill host. Note that PCI and cardbus 833 * use different BARs. 834 */ 835 rc = pcim_enable_device(pdev); 836 if (rc) 837 return rc; 838 839 if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM) 840 mmio_bar = MMIO_BAR_PCI; 841 else 842 mmio_bar = MMIO_BAR_CARDBUS; 843 844 rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME); 845 if (rc) 846 return rc; 847 host->iomap = iomap = pcim_iomap_table(pdev); 848 hpriv->mmio_base = iomap[mmio_bar]; 849 hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL); 850 851 for (i = 0; i < NR_PORTS; i++) { 852 struct ata_port *ap = host->ports[i]; 853 854 ata_port_pbar_desc(ap, mmio_bar, -1, "mmio"); 855 ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port"); 856 } 857 858 /* Set dma_mask. This devices doesn't support 64bit addressing. */ 859 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); 860 if (rc) { 861 dev_err(&pdev->dev, "32-bit DMA enable failed\n"); 862 return rc; 863 } 864 865 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); 866 if (rc) { 867 dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n"); 868 return rc; 869 } 870 871 /* 872 * This controller is braindamaged. dma_boundary is 0xffff 873 * like others but it will lock up the whole machine HARD if 874 * 65536 byte PRD entry is fed. Reduce maximum segment size. 875 */ 876 rc = dma_set_max_seg_size(&pdev->dev, 65536 - 512); 877 if (rc) { 878 dev_err(&pdev->dev, "failed to set the maximum segment size\n"); 879 return rc; 880 } 881 882 rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); 883 if (rc) { 884 dev_err(&pdev->dev, "failed to initialize controller\n"); 885 return rc; 886 } 887 888 pci_set_master(pdev); 889 return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED, 890 &inic_sht); 891 } 892 893 static const struct pci_device_id inic_pci_tbl[] = { 894 { PCI_VDEVICE(INIT, 0x1622), }, 895 { }, 896 }; 897 898 static struct pci_driver inic_pci_driver = { 899 .name = DRV_NAME, 900 .id_table = inic_pci_tbl, 901 #ifdef CONFIG_PM_SLEEP 902 .suspend = ata_pci_device_suspend, 903 .resume = inic_pci_device_resume, 904 #endif 905 .probe = inic_init_one, 906 .remove = ata_pci_remove_one, 907 }; 908 909 module_pci_driver(inic_pci_driver); 910 911 MODULE_AUTHOR("Tejun Heo"); 912 MODULE_DESCRIPTION("low-level driver for Initio 162x SATA"); 913 MODULE_LICENSE("GPL v2"); 914 MODULE_DEVICE_TABLE(pci, inic_pci_tbl); 915 MODULE_VERSION(DRV_VERSION); 916