1 /* 2 * sata_inic162x.c - Driver for Initio 162x SATA controllers 3 * 4 * Copyright 2006 SUSE Linux Products GmbH 5 * Copyright 2006 Tejun Heo <teheo@novell.com> 6 * 7 * This file is released under GPL v2. 8 * 9 * This controller is eccentric and easily locks up if something isn't 10 * right. Documentation is available at initio's website but it only 11 * documents registers (not programming model). 12 * 13 * This driver has interesting history. The first version was written 14 * from the documentation and a 2.4 IDE driver posted on a Taiwan 15 * company, which didn't use any IDMA features and couldn't handle 16 * LBA48. The resulting driver couldn't handle LBA48 devices either 17 * making it pretty useless. 18 * 19 * After a while, initio picked the driver up, renamed it to 20 * sata_initio162x, updated it to use IDMA for ATA DMA commands and 21 * posted it on their website. It only used ATA_PROT_DMA for IDMA and 22 * attaching both devices and issuing IDMA and !IDMA commands 23 * simultaneously broke it due to PIRQ masking interaction but it did 24 * show how to use the IDMA (ADMA + some initio specific twists) 25 * engine. 26 * 27 * Then, I picked up their changes again and here's the usable driver 28 * which uses IDMA for everything. Everything works now including 29 * LBA48, CD/DVD burning, suspend/resume and hotplug. There are some 30 * issues tho. Result Tf is not resported properly, NCQ isn't 31 * supported yet and CD/DVD writing works with DMA assisted PIO 32 * protocol (which, for native SATA devices, shouldn't cause any 33 * noticeable difference). 34 * 35 * Anyways, so, here's finally a working driver for inic162x. Enjoy! 36 * 37 * initio: If you guys wanna improve the driver regarding result TF 38 * access and other stuff, please feel free to contact me. I'll be 39 * happy to assist. 40 */ 41 42 #include <linux/gfp.h> 43 #include <linux/kernel.h> 44 #include <linux/module.h> 45 #include <linux/pci.h> 46 #include <scsi/scsi_host.h> 47 #include <linux/libata.h> 48 #include <linux/blkdev.h> 49 #include <scsi/scsi_device.h> 50 51 #define DRV_NAME "sata_inic162x" 52 #define DRV_VERSION "0.4" 53 54 enum { 55 MMIO_BAR_PCI = 5, 56 MMIO_BAR_CARDBUS = 1, 57 58 NR_PORTS = 2, 59 60 IDMA_CPB_TBL_SIZE = 4 * 32, 61 62 INIC_DMA_BOUNDARY = 0xffffff, 63 64 HOST_ACTRL = 0x08, 65 HOST_CTL = 0x7c, 66 HOST_STAT = 0x7e, 67 HOST_IRQ_STAT = 0xbc, 68 HOST_IRQ_MASK = 0xbe, 69 70 PORT_SIZE = 0x40, 71 72 /* registers for ATA TF operation */ 73 PORT_TF_DATA = 0x00, 74 PORT_TF_FEATURE = 0x01, 75 PORT_TF_NSECT = 0x02, 76 PORT_TF_LBAL = 0x03, 77 PORT_TF_LBAM = 0x04, 78 PORT_TF_LBAH = 0x05, 79 PORT_TF_DEVICE = 0x06, 80 PORT_TF_COMMAND = 0x07, 81 PORT_TF_ALT_STAT = 0x08, 82 PORT_IRQ_STAT = 0x09, 83 PORT_IRQ_MASK = 0x0a, 84 PORT_PRD_CTL = 0x0b, 85 PORT_PRD_ADDR = 0x0c, 86 PORT_PRD_XFERLEN = 0x10, 87 PORT_CPB_CPBLAR = 0x18, 88 PORT_CPB_PTQFIFO = 0x1c, 89 90 /* IDMA register */ 91 PORT_IDMA_CTL = 0x14, 92 PORT_IDMA_STAT = 0x16, 93 94 PORT_RPQ_FIFO = 0x1e, 95 PORT_RPQ_CNT = 0x1f, 96 97 PORT_SCR = 0x20, 98 99 /* HOST_CTL bits */ 100 HCTL_LEDEN = (1 << 3), /* enable LED operation */ 101 HCTL_IRQOFF = (1 << 8), /* global IRQ off */ 102 HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */ 103 HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/ 104 HCTL_PWRDWN = (1 << 12), /* power down PHYs */ 105 HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */ 106 HCTL_RPGSEL = (1 << 15), /* register page select */ 107 108 HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST | 109 HCTL_RPGSEL, 110 111 /* HOST_IRQ_(STAT|MASK) bits */ 112 HIRQ_PORT0 = (1 << 0), 113 HIRQ_PORT1 = (1 << 1), 114 HIRQ_SOFT = (1 << 14), 115 HIRQ_GLOBAL = (1 << 15), /* STAT only */ 116 117 /* PORT_IRQ_(STAT|MASK) bits */ 118 PIRQ_OFFLINE = (1 << 0), /* device unplugged */ 119 PIRQ_ONLINE = (1 << 1), /* device plugged */ 120 PIRQ_COMPLETE = (1 << 2), /* completion interrupt */ 121 PIRQ_FATAL = (1 << 3), /* fatal error */ 122 PIRQ_ATA = (1 << 4), /* ATA interrupt */ 123 PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */ 124 PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */ 125 126 PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL, 127 PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA, 128 PIRQ_MASK_FREEZE = 0xff, 129 130 /* PORT_PRD_CTL bits */ 131 PRD_CTL_START = (1 << 0), 132 PRD_CTL_WR = (1 << 3), 133 PRD_CTL_DMAEN = (1 << 7), /* DMA enable */ 134 135 /* PORT_IDMA_CTL bits */ 136 IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */ 137 IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */ 138 IDMA_CTL_GO = (1 << 7), /* IDMA mode go */ 139 IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */ 140 141 /* PORT_IDMA_STAT bits */ 142 IDMA_STAT_PERR = (1 << 0), /* PCI ERROR MODE */ 143 IDMA_STAT_CPBERR = (1 << 1), /* ADMA CPB error */ 144 IDMA_STAT_LGCY = (1 << 3), /* ADMA legacy */ 145 IDMA_STAT_UIRQ = (1 << 4), /* ADMA unsolicited irq */ 146 IDMA_STAT_STPD = (1 << 5), /* ADMA stopped */ 147 IDMA_STAT_PSD = (1 << 6), /* ADMA pause */ 148 IDMA_STAT_DONE = (1 << 7), /* ADMA done */ 149 150 IDMA_STAT_ERR = IDMA_STAT_PERR | IDMA_STAT_CPBERR, 151 152 /* CPB Control Flags*/ 153 CPB_CTL_VALID = (1 << 0), /* CPB valid */ 154 CPB_CTL_QUEUED = (1 << 1), /* queued command */ 155 CPB_CTL_DATA = (1 << 2), /* data, rsvd in datasheet */ 156 CPB_CTL_IEN = (1 << 3), /* PCI interrupt enable */ 157 CPB_CTL_DEVDIR = (1 << 4), /* device direction control */ 158 159 /* CPB Response Flags */ 160 CPB_RESP_DONE = (1 << 0), /* ATA command complete */ 161 CPB_RESP_REL = (1 << 1), /* ATA release */ 162 CPB_RESP_IGNORED = (1 << 2), /* CPB ignored */ 163 CPB_RESP_ATA_ERR = (1 << 3), /* ATA command error */ 164 CPB_RESP_SPURIOUS = (1 << 4), /* ATA spurious interrupt error */ 165 CPB_RESP_UNDERFLOW = (1 << 5), /* APRD deficiency length error */ 166 CPB_RESP_OVERFLOW = (1 << 6), /* APRD exccess length error */ 167 CPB_RESP_CPB_ERR = (1 << 7), /* CPB error flag */ 168 169 /* PRD Control Flags */ 170 PRD_DRAIN = (1 << 1), /* ignore data excess */ 171 PRD_CDB = (1 << 2), /* atapi packet command pointer */ 172 PRD_DIRECT_INTR = (1 << 3), /* direct interrupt */ 173 PRD_DMA = (1 << 4), /* data transfer method */ 174 PRD_WRITE = (1 << 5), /* data dir, rsvd in datasheet */ 175 PRD_IOM = (1 << 6), /* io/memory transfer */ 176 PRD_END = (1 << 7), /* APRD chain end */ 177 }; 178 179 /* Comman Parameter Block */ 180 struct inic_cpb { 181 u8 resp_flags; /* Response Flags */ 182 u8 error; /* ATA Error */ 183 u8 status; /* ATA Status */ 184 u8 ctl_flags; /* Control Flags */ 185 __le32 len; /* Total Transfer Length */ 186 __le32 prd; /* First PRD pointer */ 187 u8 rsvd[4]; 188 /* 16 bytes */ 189 u8 feature; /* ATA Feature */ 190 u8 hob_feature; /* ATA Ex. Feature */ 191 u8 device; /* ATA Device/Head */ 192 u8 mirctl; /* Mirror Control */ 193 u8 nsect; /* ATA Sector Count */ 194 u8 hob_nsect; /* ATA Ex. Sector Count */ 195 u8 lbal; /* ATA Sector Number */ 196 u8 hob_lbal; /* ATA Ex. Sector Number */ 197 u8 lbam; /* ATA Cylinder Low */ 198 u8 hob_lbam; /* ATA Ex. Cylinder Low */ 199 u8 lbah; /* ATA Cylinder High */ 200 u8 hob_lbah; /* ATA Ex. Cylinder High */ 201 u8 command; /* ATA Command */ 202 u8 ctl; /* ATA Control */ 203 u8 slave_error; /* Slave ATA Error */ 204 u8 slave_status; /* Slave ATA Status */ 205 /* 32 bytes */ 206 } __packed; 207 208 /* Physical Region Descriptor */ 209 struct inic_prd { 210 __le32 mad; /* Physical Memory Address */ 211 __le16 len; /* Transfer Length */ 212 u8 rsvd; 213 u8 flags; /* Control Flags */ 214 } __packed; 215 216 struct inic_pkt { 217 struct inic_cpb cpb; 218 struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */ 219 u8 cdb[ATAPI_CDB_LEN]; 220 } __packed; 221 222 struct inic_host_priv { 223 void __iomem *mmio_base; 224 u16 cached_hctl; 225 }; 226 227 struct inic_port_priv { 228 struct inic_pkt *pkt; 229 dma_addr_t pkt_dma; 230 u32 *cpb_tbl; 231 dma_addr_t cpb_tbl_dma; 232 }; 233 234 static struct scsi_host_template inic_sht = { 235 ATA_BASE_SHT(DRV_NAME), 236 .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */ 237 .dma_boundary = INIC_DMA_BOUNDARY, 238 }; 239 240 static const int scr_map[] = { 241 [SCR_STATUS] = 0, 242 [SCR_ERROR] = 1, 243 [SCR_CONTROL] = 2, 244 }; 245 246 static void __iomem *inic_port_base(struct ata_port *ap) 247 { 248 struct inic_host_priv *hpriv = ap->host->private_data; 249 250 return hpriv->mmio_base + ap->port_no * PORT_SIZE; 251 } 252 253 static void inic_reset_port(void __iomem *port_base) 254 { 255 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; 256 257 /* stop IDMA engine */ 258 readw(idma_ctl); /* flush */ 259 msleep(1); 260 261 /* mask IRQ and assert reset */ 262 writew(IDMA_CTL_RST_IDMA, idma_ctl); 263 readw(idma_ctl); /* flush */ 264 msleep(1); 265 266 /* release reset */ 267 writew(0, idma_ctl); 268 269 /* clear irq */ 270 writeb(0xff, port_base + PORT_IRQ_STAT); 271 } 272 273 static int inic_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val) 274 { 275 void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; 276 void __iomem *addr; 277 278 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) 279 return -EINVAL; 280 281 addr = scr_addr + scr_map[sc_reg] * 4; 282 *val = readl(scr_addr + scr_map[sc_reg] * 4); 283 284 /* this controller has stuck DIAG.N, ignore it */ 285 if (sc_reg == SCR_ERROR) 286 *val &= ~SERR_PHYRDY_CHG; 287 return 0; 288 } 289 290 static int inic_scr_write(struct ata_link *link, unsigned sc_reg, u32 val) 291 { 292 void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; 293 294 if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) 295 return -EINVAL; 296 297 writel(val, scr_addr + scr_map[sc_reg] * 4); 298 return 0; 299 } 300 301 static void inic_stop_idma(struct ata_port *ap) 302 { 303 void __iomem *port_base = inic_port_base(ap); 304 305 readb(port_base + PORT_RPQ_FIFO); 306 readb(port_base + PORT_RPQ_CNT); 307 writew(0, port_base + PORT_IDMA_CTL); 308 } 309 310 static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat) 311 { 312 struct ata_eh_info *ehi = &ap->link.eh_info; 313 struct inic_port_priv *pp = ap->private_data; 314 struct inic_cpb *cpb = &pp->pkt->cpb; 315 bool freeze = false; 316 317 ata_ehi_clear_desc(ehi); 318 ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x", 319 irq_stat, idma_stat); 320 321 inic_stop_idma(ap); 322 323 if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) { 324 ata_ehi_push_desc(ehi, "hotplug"); 325 ata_ehi_hotplugged(ehi); 326 freeze = true; 327 } 328 329 if (idma_stat & IDMA_STAT_PERR) { 330 ata_ehi_push_desc(ehi, "PCI error"); 331 freeze = true; 332 } 333 334 if (idma_stat & IDMA_STAT_CPBERR) { 335 ata_ehi_push_desc(ehi, "CPB error"); 336 337 if (cpb->resp_flags & CPB_RESP_IGNORED) { 338 __ata_ehi_push_desc(ehi, " ignored"); 339 ehi->err_mask |= AC_ERR_INVALID; 340 freeze = true; 341 } 342 343 if (cpb->resp_flags & CPB_RESP_ATA_ERR) 344 ehi->err_mask |= AC_ERR_DEV; 345 346 if (cpb->resp_flags & CPB_RESP_SPURIOUS) { 347 __ata_ehi_push_desc(ehi, " spurious-intr"); 348 ehi->err_mask |= AC_ERR_HSM; 349 freeze = true; 350 } 351 352 if (cpb->resp_flags & 353 (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) { 354 __ata_ehi_push_desc(ehi, " data-over/underflow"); 355 ehi->err_mask |= AC_ERR_HSM; 356 freeze = true; 357 } 358 } 359 360 if (freeze) 361 ata_port_freeze(ap); 362 else 363 ata_port_abort(ap); 364 } 365 366 static void inic_host_intr(struct ata_port *ap) 367 { 368 void __iomem *port_base = inic_port_base(ap); 369 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); 370 u8 irq_stat; 371 u16 idma_stat; 372 373 /* read and clear IRQ status */ 374 irq_stat = readb(port_base + PORT_IRQ_STAT); 375 writeb(irq_stat, port_base + PORT_IRQ_STAT); 376 idma_stat = readw(port_base + PORT_IDMA_STAT); 377 378 if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR))) 379 inic_host_err_intr(ap, irq_stat, idma_stat); 380 381 if (unlikely(!qc)) 382 goto spurious; 383 384 if (likely(idma_stat & IDMA_STAT_DONE)) { 385 inic_stop_idma(ap); 386 387 /* Depending on circumstances, device error 388 * isn't reported by IDMA, check it explicitly. 389 */ 390 if (unlikely(readb(port_base + PORT_TF_COMMAND) & 391 (ATA_DF | ATA_ERR))) 392 qc->err_mask |= AC_ERR_DEV; 393 394 ata_qc_complete(qc); 395 return; 396 } 397 398 spurious: 399 ata_port_warn(ap, "unhandled interrupt: cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n", 400 qc ? qc->tf.command : 0xff, irq_stat, idma_stat); 401 } 402 403 static irqreturn_t inic_interrupt(int irq, void *dev_instance) 404 { 405 struct ata_host *host = dev_instance; 406 struct inic_host_priv *hpriv = host->private_data; 407 u16 host_irq_stat; 408 int i, handled = 0; 409 410 host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT); 411 412 if (unlikely(!(host_irq_stat & HIRQ_GLOBAL))) 413 goto out; 414 415 spin_lock(&host->lock); 416 417 for (i = 0; i < NR_PORTS; i++) 418 if (host_irq_stat & (HIRQ_PORT0 << i)) { 419 inic_host_intr(host->ports[i]); 420 handled++; 421 } 422 423 spin_unlock(&host->lock); 424 425 out: 426 return IRQ_RETVAL(handled); 427 } 428 429 static int inic_check_atapi_dma(struct ata_queued_cmd *qc) 430 { 431 /* For some reason ATAPI_PROT_DMA doesn't work for some 432 * commands including writes and other misc ops. Use PIO 433 * protocol instead, which BTW is driven by the DMA engine 434 * anyway, so it shouldn't make much difference for native 435 * SATA devices. 436 */ 437 if (atapi_cmd_type(qc->cdb[0]) == READ) 438 return 0; 439 return 1; 440 } 441 442 static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc) 443 { 444 struct scatterlist *sg; 445 unsigned int si; 446 u8 flags = 0; 447 448 if (qc->tf.flags & ATA_TFLAG_WRITE) 449 flags |= PRD_WRITE; 450 451 if (ata_is_dma(qc->tf.protocol)) 452 flags |= PRD_DMA; 453 454 for_each_sg(qc->sg, sg, qc->n_elem, si) { 455 prd->mad = cpu_to_le32(sg_dma_address(sg)); 456 prd->len = cpu_to_le16(sg_dma_len(sg)); 457 prd->flags = flags; 458 prd++; 459 } 460 461 WARN_ON(!si); 462 prd[-1].flags |= PRD_END; 463 } 464 465 static void inic_qc_prep(struct ata_queued_cmd *qc) 466 { 467 struct inic_port_priv *pp = qc->ap->private_data; 468 struct inic_pkt *pkt = pp->pkt; 469 struct inic_cpb *cpb = &pkt->cpb; 470 struct inic_prd *prd = pkt->prd; 471 bool is_atapi = ata_is_atapi(qc->tf.protocol); 472 bool is_data = ata_is_data(qc->tf.protocol); 473 unsigned int cdb_len = 0; 474 475 VPRINTK("ENTER\n"); 476 477 if (is_atapi) 478 cdb_len = qc->dev->cdb_len; 479 480 /* prepare packet, based on initio driver */ 481 memset(pkt, 0, sizeof(struct inic_pkt)); 482 483 cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN; 484 if (is_atapi || is_data) 485 cpb->ctl_flags |= CPB_CTL_DATA; 486 487 cpb->len = cpu_to_le32(qc->nbytes + cdb_len); 488 cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd)); 489 490 cpb->device = qc->tf.device; 491 cpb->feature = qc->tf.feature; 492 cpb->nsect = qc->tf.nsect; 493 cpb->lbal = qc->tf.lbal; 494 cpb->lbam = qc->tf.lbam; 495 cpb->lbah = qc->tf.lbah; 496 497 if (qc->tf.flags & ATA_TFLAG_LBA48) { 498 cpb->hob_feature = qc->tf.hob_feature; 499 cpb->hob_nsect = qc->tf.hob_nsect; 500 cpb->hob_lbal = qc->tf.hob_lbal; 501 cpb->hob_lbam = qc->tf.hob_lbam; 502 cpb->hob_lbah = qc->tf.hob_lbah; 503 } 504 505 cpb->command = qc->tf.command; 506 /* don't load ctl - dunno why. it's like that in the initio driver */ 507 508 /* setup PRD for CDB */ 509 if (is_atapi) { 510 memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN); 511 prd->mad = cpu_to_le32(pp->pkt_dma + 512 offsetof(struct inic_pkt, cdb)); 513 prd->len = cpu_to_le16(cdb_len); 514 prd->flags = PRD_CDB | PRD_WRITE; 515 if (!is_data) 516 prd->flags |= PRD_END; 517 prd++; 518 } 519 520 /* setup sg table */ 521 if (is_data) 522 inic_fill_sg(prd, qc); 523 524 pp->cpb_tbl[0] = pp->pkt_dma; 525 } 526 527 static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) 528 { 529 struct ata_port *ap = qc->ap; 530 void __iomem *port_base = inic_port_base(ap); 531 532 /* fire up the ADMA engine */ 533 writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL); 534 writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL); 535 writeb(0, port_base + PORT_CPB_PTQFIFO); 536 537 return 0; 538 } 539 540 static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf) 541 { 542 void __iomem *port_base = inic_port_base(ap); 543 544 tf->feature = readb(port_base + PORT_TF_FEATURE); 545 tf->nsect = readb(port_base + PORT_TF_NSECT); 546 tf->lbal = readb(port_base + PORT_TF_LBAL); 547 tf->lbam = readb(port_base + PORT_TF_LBAM); 548 tf->lbah = readb(port_base + PORT_TF_LBAH); 549 tf->device = readb(port_base + PORT_TF_DEVICE); 550 tf->command = readb(port_base + PORT_TF_COMMAND); 551 } 552 553 static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc) 554 { 555 struct ata_taskfile *rtf = &qc->result_tf; 556 struct ata_taskfile tf; 557 558 /* FIXME: Except for status and error, result TF access 559 * doesn't work. I tried reading from BAR0/2, CPB and BAR5. 560 * None works regardless of which command interface is used. 561 * For now return true iff status indicates device error. 562 * This means that we're reporting bogus sector for RW 563 * failures. Eeekk.... 564 */ 565 inic_tf_read(qc->ap, &tf); 566 567 if (!(tf.command & ATA_ERR)) 568 return false; 569 570 rtf->command = tf.command; 571 rtf->feature = tf.feature; 572 return true; 573 } 574 575 static void inic_freeze(struct ata_port *ap) 576 { 577 void __iomem *port_base = inic_port_base(ap); 578 579 writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK); 580 writeb(0xff, port_base + PORT_IRQ_STAT); 581 } 582 583 static void inic_thaw(struct ata_port *ap) 584 { 585 void __iomem *port_base = inic_port_base(ap); 586 587 writeb(0xff, port_base + PORT_IRQ_STAT); 588 writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK); 589 } 590 591 static int inic_check_ready(struct ata_link *link) 592 { 593 void __iomem *port_base = inic_port_base(link->ap); 594 595 return ata_check_ready(readb(port_base + PORT_TF_COMMAND)); 596 } 597 598 /* 599 * SRST and SControl hardreset don't give valid signature on this 600 * controller. Only controller specific hardreset mechanism works. 601 */ 602 static int inic_hardreset(struct ata_link *link, unsigned int *class, 603 unsigned long deadline) 604 { 605 struct ata_port *ap = link->ap; 606 void __iomem *port_base = inic_port_base(ap); 607 void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; 608 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); 609 int rc; 610 611 /* hammer it into sane state */ 612 inic_reset_port(port_base); 613 614 writew(IDMA_CTL_RST_ATA, idma_ctl); 615 readw(idma_ctl); /* flush */ 616 ata_msleep(ap, 1); 617 writew(0, idma_ctl); 618 619 rc = sata_link_resume(link, timing, deadline); 620 if (rc) { 621 ata_link_warn(link, 622 "failed to resume link after reset (errno=%d)\n", 623 rc); 624 return rc; 625 } 626 627 *class = ATA_DEV_NONE; 628 if (ata_link_online(link)) { 629 struct ata_taskfile tf; 630 631 /* wait for link to become ready */ 632 rc = ata_wait_after_reset(link, deadline, inic_check_ready); 633 /* link occupied, -ENODEV too is an error */ 634 if (rc) { 635 ata_link_warn(link, 636 "device not ready after hardreset (errno=%d)\n", 637 rc); 638 return rc; 639 } 640 641 inic_tf_read(ap, &tf); 642 *class = ata_dev_classify(&tf); 643 } 644 645 return 0; 646 } 647 648 static void inic_error_handler(struct ata_port *ap) 649 { 650 void __iomem *port_base = inic_port_base(ap); 651 652 inic_reset_port(port_base); 653 ata_std_error_handler(ap); 654 } 655 656 static void inic_post_internal_cmd(struct ata_queued_cmd *qc) 657 { 658 /* make DMA engine forget about the failed command */ 659 if (qc->flags & ATA_QCFLAG_FAILED) 660 inic_reset_port(inic_port_base(qc->ap)); 661 } 662 663 static void init_port(struct ata_port *ap) 664 { 665 void __iomem *port_base = inic_port_base(ap); 666 struct inic_port_priv *pp = ap->private_data; 667 668 /* clear packet and CPB table */ 669 memset(pp->pkt, 0, sizeof(struct inic_pkt)); 670 memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE); 671 672 /* setup CPB lookup table addresses */ 673 writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR); 674 } 675 676 static int inic_port_resume(struct ata_port *ap) 677 { 678 init_port(ap); 679 return 0; 680 } 681 682 static int inic_port_start(struct ata_port *ap) 683 { 684 struct device *dev = ap->host->dev; 685 struct inic_port_priv *pp; 686 687 /* alloc and initialize private data */ 688 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); 689 if (!pp) 690 return -ENOMEM; 691 ap->private_data = pp; 692 693 /* Alloc resources */ 694 pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt), 695 &pp->pkt_dma, GFP_KERNEL); 696 if (!pp->pkt) 697 return -ENOMEM; 698 699 pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE, 700 &pp->cpb_tbl_dma, GFP_KERNEL); 701 if (!pp->cpb_tbl) 702 return -ENOMEM; 703 704 init_port(ap); 705 706 return 0; 707 } 708 709 static struct ata_port_operations inic_port_ops = { 710 .inherits = &sata_port_ops, 711 712 .check_atapi_dma = inic_check_atapi_dma, 713 .qc_prep = inic_qc_prep, 714 .qc_issue = inic_qc_issue, 715 .qc_fill_rtf = inic_qc_fill_rtf, 716 717 .freeze = inic_freeze, 718 .thaw = inic_thaw, 719 .hardreset = inic_hardreset, 720 .error_handler = inic_error_handler, 721 .post_internal_cmd = inic_post_internal_cmd, 722 723 .scr_read = inic_scr_read, 724 .scr_write = inic_scr_write, 725 726 .port_resume = inic_port_resume, 727 .port_start = inic_port_start, 728 }; 729 730 static struct ata_port_info inic_port_info = { 731 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, 732 .pio_mask = ATA_PIO4, 733 .mwdma_mask = ATA_MWDMA2, 734 .udma_mask = ATA_UDMA6, 735 .port_ops = &inic_port_ops 736 }; 737 738 static int init_controller(void __iomem *mmio_base, u16 hctl) 739 { 740 int i; 741 u16 val; 742 743 hctl &= ~HCTL_KNOWN_BITS; 744 745 /* Soft reset whole controller. Spec says reset duration is 3 746 * PCI clocks, be generous and give it 10ms. 747 */ 748 writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL); 749 readw(mmio_base + HOST_CTL); /* flush */ 750 751 for (i = 0; i < 10; i++) { 752 msleep(1); 753 val = readw(mmio_base + HOST_CTL); 754 if (!(val & HCTL_SOFTRST)) 755 break; 756 } 757 758 if (val & HCTL_SOFTRST) 759 return -EIO; 760 761 /* mask all interrupts and reset ports */ 762 for (i = 0; i < NR_PORTS; i++) { 763 void __iomem *port_base = mmio_base + i * PORT_SIZE; 764 765 writeb(0xff, port_base + PORT_IRQ_MASK); 766 inic_reset_port(port_base); 767 } 768 769 /* port IRQ is masked now, unmask global IRQ */ 770 writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL); 771 val = readw(mmio_base + HOST_IRQ_MASK); 772 val &= ~(HIRQ_PORT0 | HIRQ_PORT1); 773 writew(val, mmio_base + HOST_IRQ_MASK); 774 775 return 0; 776 } 777 778 #ifdef CONFIG_PM 779 static int inic_pci_device_resume(struct pci_dev *pdev) 780 { 781 struct ata_host *host = dev_get_drvdata(&pdev->dev); 782 struct inic_host_priv *hpriv = host->private_data; 783 int rc; 784 785 rc = ata_pci_device_do_resume(pdev); 786 if (rc) 787 return rc; 788 789 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { 790 rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); 791 if (rc) 792 return rc; 793 } 794 795 ata_host_resume(host); 796 797 return 0; 798 } 799 #endif 800 801 static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 802 { 803 const struct ata_port_info *ppi[] = { &inic_port_info, NULL }; 804 struct ata_host *host; 805 struct inic_host_priv *hpriv; 806 void __iomem * const *iomap; 807 int mmio_bar; 808 int i, rc; 809 810 ata_print_version_once(&pdev->dev, DRV_VERSION); 811 812 /* alloc host */ 813 host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS); 814 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); 815 if (!host || !hpriv) 816 return -ENOMEM; 817 818 host->private_data = hpriv; 819 820 /* Acquire resources and fill host. Note that PCI and cardbus 821 * use different BARs. 822 */ 823 rc = pcim_enable_device(pdev); 824 if (rc) 825 return rc; 826 827 if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM) 828 mmio_bar = MMIO_BAR_PCI; 829 else 830 mmio_bar = MMIO_BAR_CARDBUS; 831 832 rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME); 833 if (rc) 834 return rc; 835 host->iomap = iomap = pcim_iomap_table(pdev); 836 hpriv->mmio_base = iomap[mmio_bar]; 837 hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL); 838 839 for (i = 0; i < NR_PORTS; i++) { 840 struct ata_port *ap = host->ports[i]; 841 842 ata_port_pbar_desc(ap, mmio_bar, -1, "mmio"); 843 ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port"); 844 } 845 846 /* Set dma_mask. This devices doesn't support 64bit addressing. */ 847 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 848 if (rc) { 849 dev_err(&pdev->dev, "32-bit DMA enable failed\n"); 850 return rc; 851 } 852 853 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); 854 if (rc) { 855 dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n"); 856 return rc; 857 } 858 859 /* 860 * This controller is braindamaged. dma_boundary is 0xffff 861 * like others but it will lock up the whole machine HARD if 862 * 65536 byte PRD entry is fed. Reduce maximum segment size. 863 */ 864 rc = pci_set_dma_max_seg_size(pdev, 65536 - 512); 865 if (rc) { 866 dev_err(&pdev->dev, "failed to set the maximum segment size\n"); 867 return rc; 868 } 869 870 rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); 871 if (rc) { 872 dev_err(&pdev->dev, "failed to initialize controller\n"); 873 return rc; 874 } 875 876 pci_set_master(pdev); 877 return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED, 878 &inic_sht); 879 } 880 881 static const struct pci_device_id inic_pci_tbl[] = { 882 { PCI_VDEVICE(INIT, 0x1622), }, 883 { }, 884 }; 885 886 static struct pci_driver inic_pci_driver = { 887 .name = DRV_NAME, 888 .id_table = inic_pci_tbl, 889 #ifdef CONFIG_PM 890 .suspend = ata_pci_device_suspend, 891 .resume = inic_pci_device_resume, 892 #endif 893 .probe = inic_init_one, 894 .remove = ata_pci_remove_one, 895 }; 896 897 module_pci_driver(inic_pci_driver); 898 899 MODULE_AUTHOR("Tejun Heo"); 900 MODULE_DESCRIPTION("low-level driver for Initio 162x SATA"); 901 MODULE_LICENSE("GPL v2"); 902 MODULE_DEVICE_TABLE(pci, inic_pci_tbl); 903 MODULE_VERSION(DRV_VERSION); 904