xref: /openbmc/linux/drivers/ata/pata_pxa.c (revision 94c7b6fc)
1 /*
2  * Generic PXA PATA driver
3  *
4  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
5  *
6  *  This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation; either version 2, or (at your option)
9  *  any later version.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *  GNU General Public License for more details.
15  *
16  *  You should have received a copy of the GNU General Public License
17  *  along with this program; see the file COPYING.  If not, write to
18  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
19  */
20 
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <linux/blkdev.h>
24 #include <linux/ata.h>
25 #include <linux/libata.h>
26 #include <linux/platform_device.h>
27 #include <linux/gpio.h>
28 #include <linux/slab.h>
29 #include <linux/completion.h>
30 
31 #include <scsi/scsi_host.h>
32 
33 #include <mach/pxa2xx-regs.h>
34 #include <linux/platform_data/ata-pxa.h>
35 #include <mach/dma.h>
36 
37 #define DRV_NAME	"pata_pxa"
38 #define DRV_VERSION	"0.1"
39 
40 struct pata_pxa_data {
41 	uint32_t		dma_channel;
42 	struct pxa_dma_desc	*dma_desc;
43 	dma_addr_t		dma_desc_addr;
44 	uint32_t		dma_desc_id;
45 
46 	/* DMA IO physical address */
47 	uint32_t		dma_io_addr;
48 	/* PXA DREQ<0:2> pin selector */
49 	uint32_t		dma_dreq;
50 	/* DMA DCSR register value */
51 	uint32_t		dma_dcsr;
52 
53 	struct completion	dma_done;
54 };
55 
56 /*
57  * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor,
58  * if the transfer is longer, it is split into multiple chained descriptors.
59  */
60 static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc)
61 {
62 	struct pata_pxa_data *pd = qc->ap->private_data;
63 
64 	uint32_t cpu_len, seg_len;
65 	dma_addr_t cpu_addr;
66 
67 	cpu_addr = sg_dma_address(sg);
68 	cpu_len = sg_dma_len(sg);
69 
70 	do {
71 		seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len;
72 
73 		pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr +
74 			((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc));
75 
76 		pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 |
77 					DCMD_WIDTH2 | (DCMD_LENGTH & seg_len);
78 
79 		if (qc->tf.flags & ATA_TFLAG_WRITE) {
80 			pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr;
81 			pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr;
82 			pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR |
83 						DCMD_FLOWTRG;
84 		} else {
85 			pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr;
86 			pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr;
87 			pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR |
88 						DCMD_FLOWSRC;
89 		}
90 
91 		cpu_len -= seg_len;
92 		cpu_addr += seg_len;
93 		pd->dma_desc_id++;
94 
95 	} while (cpu_len);
96 
97 	/* Should not happen */
98 	if (seg_len & 0x1f)
99 		DALGN |= (1 << pd->dma_dreq);
100 }
101 
102 /*
103  * Prepare taskfile for submission.
104  */
105 static void pxa_qc_prep(struct ata_queued_cmd *qc)
106 {
107 	struct pata_pxa_data *pd = qc->ap->private_data;
108 	int si = 0;
109 	struct scatterlist *sg;
110 
111 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
112 		return;
113 
114 	pd->dma_desc_id = 0;
115 
116 	DCSR(pd->dma_channel) = 0;
117 	DALGN &= ~(1 << pd->dma_dreq);
118 
119 	for_each_sg(qc->sg, sg, qc->n_elem, si)
120 		pxa_load_dmac(sg, qc);
121 
122 	pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP;
123 
124 	/* Fire IRQ only at the end of last block */
125 	pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN;
126 
127 	DDADR(pd->dma_channel) = pd->dma_desc_addr;
128 	DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel;
129 
130 }
131 
132 /*
133  * Configure the DMA controller, load the DMA descriptors, but don't start the
134  * DMA controller yet. Only issue the ATA command.
135  */
136 static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
137 {
138 	qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
139 }
140 
141 /*
142  * Execute the DMA transfer.
143  */
144 static void pxa_bmdma_start(struct ata_queued_cmd *qc)
145 {
146 	struct pata_pxa_data *pd = qc->ap->private_data;
147 	init_completion(&pd->dma_done);
148 	DCSR(pd->dma_channel) = DCSR_RUN;
149 }
150 
151 /*
152  * Wait until the DMA transfer completes, then stop the DMA controller.
153  */
154 static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
155 {
156 	struct pata_pxa_data *pd = qc->ap->private_data;
157 
158 	if ((DCSR(pd->dma_channel) & DCSR_RUN) &&
159 		wait_for_completion_timeout(&pd->dma_done, HZ))
160 		dev_err(qc->ap->dev, "Timeout waiting for DMA completion!");
161 
162 	DCSR(pd->dma_channel) = 0;
163 }
164 
165 /*
166  * Read DMA status. The bmdma_stop() will take care of properly finishing the
167  * DMA transfer so we always have DMA-complete interrupt here.
168  */
169 static unsigned char pxa_bmdma_status(struct ata_port *ap)
170 {
171 	struct pata_pxa_data *pd = ap->private_data;
172 	unsigned char ret = ATA_DMA_INTR;
173 
174 	if (pd->dma_dcsr & DCSR_BUSERR)
175 		ret |= ATA_DMA_ERR;
176 
177 	return ret;
178 }
179 
180 /*
181  * No IRQ register present so we do nothing.
182  */
183 static void pxa_irq_clear(struct ata_port *ap)
184 {
185 }
186 
187 /*
188  * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
189  * unclear why ATAPI has DMA issues.
190  */
191 static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
192 {
193 	return -EOPNOTSUPP;
194 }
195 
196 static struct scsi_host_template pxa_ata_sht = {
197 	ATA_BMDMA_SHT(DRV_NAME),
198 };
199 
200 static struct ata_port_operations pxa_ata_port_ops = {
201 	.inherits		= &ata_bmdma_port_ops,
202 	.cable_detect		= ata_cable_40wire,
203 
204 	.bmdma_setup		= pxa_bmdma_setup,
205 	.bmdma_start		= pxa_bmdma_start,
206 	.bmdma_stop		= pxa_bmdma_stop,
207 	.bmdma_status		= pxa_bmdma_status,
208 
209 	.check_atapi_dma	= pxa_check_atapi_dma,
210 
211 	.sff_irq_clear		= pxa_irq_clear,
212 
213 	.qc_prep		= pxa_qc_prep,
214 };
215 
216 /*
217  * DMA interrupt handler.
218  */
219 static void pxa_ata_dma_irq(int dma, void *port)
220 {
221 	struct ata_port *ap = port;
222 	struct pata_pxa_data *pd = ap->private_data;
223 
224 	pd->dma_dcsr = DCSR(dma);
225 	DCSR(dma) = pd->dma_dcsr;
226 
227 	if (pd->dma_dcsr & DCSR_STOPSTATE)
228 		complete(&pd->dma_done);
229 }
230 
231 static int pxa_ata_probe(struct platform_device *pdev)
232 {
233 	struct ata_host *host;
234 	struct ata_port *ap;
235 	struct pata_pxa_data *data;
236 	struct resource *cmd_res;
237 	struct resource *ctl_res;
238 	struct resource *dma_res;
239 	struct resource *irq_res;
240 	struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
241 	int ret = 0;
242 
243 	/*
244 	 * Resource validation, three resources are needed:
245 	 *  - CMD port base address
246 	 *  - CTL port base address
247 	 *  - DMA port base address
248 	 *  - IRQ pin
249 	 */
250 	if (pdev->num_resources != 4) {
251 		dev_err(&pdev->dev, "invalid number of resources\n");
252 		return -EINVAL;
253 	}
254 
255 	/*
256 	 * CMD port base address
257 	 */
258 	cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
259 	if (unlikely(cmd_res == NULL))
260 		return -EINVAL;
261 
262 	/*
263 	 * CTL port base address
264 	 */
265 	ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
266 	if (unlikely(ctl_res == NULL))
267 		return -EINVAL;
268 
269 	/*
270 	 * DMA port base address
271 	 */
272 	dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
273 	if (unlikely(dma_res == NULL))
274 		return -EINVAL;
275 
276 	/*
277 	 * IRQ pin
278 	 */
279 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
280 	if (unlikely(irq_res == NULL))
281 		return -EINVAL;
282 
283 	/*
284 	 * Allocate the host
285 	 */
286 	host = ata_host_alloc(&pdev->dev, 1);
287 	if (!host)
288 		return -ENOMEM;
289 
290 	ap		= host->ports[0];
291 	ap->ops		= &pxa_ata_port_ops;
292 	ap->pio_mask	= ATA_PIO4;
293 	ap->mwdma_mask	= ATA_MWDMA2;
294 
295 	ap->ioaddr.cmd_addr	= devm_ioremap(&pdev->dev, cmd_res->start,
296 						resource_size(cmd_res));
297 	ap->ioaddr.ctl_addr	= devm_ioremap(&pdev->dev, ctl_res->start,
298 						resource_size(ctl_res));
299 	ap->ioaddr.bmdma_addr	= devm_ioremap(&pdev->dev, dma_res->start,
300 						resource_size(dma_res));
301 
302 	/*
303 	 * Adjust register offsets
304 	 */
305 	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
306 	ap->ioaddr.data_addr	= ap->ioaddr.cmd_addr +
307 					(ATA_REG_DATA << pdata->reg_shift);
308 	ap->ioaddr.error_addr	= ap->ioaddr.cmd_addr +
309 					(ATA_REG_ERR << pdata->reg_shift);
310 	ap->ioaddr.feature_addr	= ap->ioaddr.cmd_addr +
311 					(ATA_REG_FEATURE << pdata->reg_shift);
312 	ap->ioaddr.nsect_addr	= ap->ioaddr.cmd_addr +
313 					(ATA_REG_NSECT << pdata->reg_shift);
314 	ap->ioaddr.lbal_addr	= ap->ioaddr.cmd_addr +
315 					(ATA_REG_LBAL << pdata->reg_shift);
316 	ap->ioaddr.lbam_addr	= ap->ioaddr.cmd_addr +
317 					(ATA_REG_LBAM << pdata->reg_shift);
318 	ap->ioaddr.lbah_addr	= ap->ioaddr.cmd_addr +
319 					(ATA_REG_LBAH << pdata->reg_shift);
320 	ap->ioaddr.device_addr	= ap->ioaddr.cmd_addr +
321 					(ATA_REG_DEVICE << pdata->reg_shift);
322 	ap->ioaddr.status_addr	= ap->ioaddr.cmd_addr +
323 					(ATA_REG_STATUS << pdata->reg_shift);
324 	ap->ioaddr.command_addr	= ap->ioaddr.cmd_addr +
325 					(ATA_REG_CMD << pdata->reg_shift);
326 
327 	/*
328 	 * Allocate and load driver's internal data structure
329 	 */
330 	data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
331 								GFP_KERNEL);
332 	if (!data)
333 		return -ENOMEM;
334 
335 	ap->private_data = data;
336 	data->dma_dreq = pdata->dma_dreq;
337 	data->dma_io_addr = dma_res->start;
338 
339 	/*
340 	 * Allocate space for the DMA descriptors
341 	 */
342 	data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
343 					&data->dma_desc_addr, GFP_KERNEL);
344 	if (!data->dma_desc)
345 		return -EINVAL;
346 
347 	/*
348 	 * Request the DMA channel
349 	 */
350 	data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW,
351 						pxa_ata_dma_irq, ap);
352 	if (data->dma_channel < 0)
353 		return -EBUSY;
354 
355 	/*
356 	 * Stop and clear the DMA channel
357 	 */
358 	DCSR(data->dma_channel) = 0;
359 
360 	/*
361 	 * Activate the ATA host
362 	 */
363 	ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
364 				pdata->irq_flags, &pxa_ata_sht);
365 	if (ret)
366 		pxa_free_dma(data->dma_channel);
367 
368 	return ret;
369 }
370 
371 static int pxa_ata_remove(struct platform_device *pdev)
372 {
373 	struct ata_host *host = platform_get_drvdata(pdev);
374 	struct pata_pxa_data *data = host->ports[0]->private_data;
375 
376 	pxa_free_dma(data->dma_channel);
377 
378 	ata_host_detach(host);
379 
380 	return 0;
381 }
382 
383 static struct platform_driver pxa_ata_driver = {
384 	.probe		= pxa_ata_probe,
385 	.remove		= pxa_ata_remove,
386 	.driver		= {
387 		.name		= DRV_NAME,
388 		.owner		= THIS_MODULE,
389 	},
390 };
391 
392 module_platform_driver(pxa_ata_driver);
393 
394 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
395 MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
396 MODULE_LICENSE("GPL");
397 MODULE_VERSION(DRV_VERSION);
398 MODULE_ALIAS("platform:" DRV_NAME);
399