xref: /openbmc/linux/drivers/ata/pata_pxa.c (revision 8e9356c6)
1 /*
2  * Generic PXA PATA driver
3  *
4  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
5  *
6  *  This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation; either version 2, or (at your option)
9  *  any later version.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *  GNU General Public License for more details.
15  *
16  *  You should have received a copy of the GNU General Public License
17  *  along with this program; see the file COPYING.  If not, write to
18  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
19  */
20 
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <linux/init.h>
24 #include <linux/blkdev.h>
25 #include <linux/ata.h>
26 #include <linux/libata.h>
27 #include <linux/platform_device.h>
28 #include <linux/gpio.h>
29 #include <linux/slab.h>
30 #include <linux/completion.h>
31 
32 #include <scsi/scsi_host.h>
33 
34 #include <mach/pxa2xx-regs.h>
35 #include <linux/platform_data/ata-pxa.h>
36 #include <mach/dma.h>
37 
38 #define DRV_NAME	"pata_pxa"
39 #define DRV_VERSION	"0.1"
40 
41 struct pata_pxa_data {
42 	uint32_t		dma_channel;
43 	struct pxa_dma_desc	*dma_desc;
44 	dma_addr_t		dma_desc_addr;
45 	uint32_t		dma_desc_id;
46 
47 	/* DMA IO physical address */
48 	uint32_t		dma_io_addr;
49 	/* PXA DREQ<0:2> pin selector */
50 	uint32_t		dma_dreq;
51 	/* DMA DCSR register value */
52 	uint32_t		dma_dcsr;
53 
54 	struct completion	dma_done;
55 };
56 
57 /*
58  * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor,
59  * if the transfer is longer, it is split into multiple chained descriptors.
60  */
61 static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc)
62 {
63 	struct pata_pxa_data *pd = qc->ap->private_data;
64 
65 	uint32_t cpu_len, seg_len;
66 	dma_addr_t cpu_addr;
67 
68 	cpu_addr = sg_dma_address(sg);
69 	cpu_len = sg_dma_len(sg);
70 
71 	do {
72 		seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len;
73 
74 		pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr +
75 			((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc));
76 
77 		pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 |
78 					DCMD_WIDTH2 | (DCMD_LENGTH & seg_len);
79 
80 		if (qc->tf.flags & ATA_TFLAG_WRITE) {
81 			pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr;
82 			pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr;
83 			pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR |
84 						DCMD_FLOWTRG;
85 		} else {
86 			pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr;
87 			pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr;
88 			pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR |
89 						DCMD_FLOWSRC;
90 		}
91 
92 		cpu_len -= seg_len;
93 		cpu_addr += seg_len;
94 		pd->dma_desc_id++;
95 
96 	} while (cpu_len);
97 
98 	/* Should not happen */
99 	if (seg_len & 0x1f)
100 		DALGN |= (1 << pd->dma_dreq);
101 }
102 
103 /*
104  * Prepare taskfile for submission.
105  */
106 static void pxa_qc_prep(struct ata_queued_cmd *qc)
107 {
108 	struct pata_pxa_data *pd = qc->ap->private_data;
109 	int si = 0;
110 	struct scatterlist *sg;
111 
112 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
113 		return;
114 
115 	pd->dma_desc_id = 0;
116 
117 	DCSR(pd->dma_channel) = 0;
118 	DALGN &= ~(1 << pd->dma_dreq);
119 
120 	for_each_sg(qc->sg, sg, qc->n_elem, si)
121 		pxa_load_dmac(sg, qc);
122 
123 	pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP;
124 
125 	/* Fire IRQ only at the end of last block */
126 	pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN;
127 
128 	DDADR(pd->dma_channel) = pd->dma_desc_addr;
129 	DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel;
130 
131 }
132 
133 /*
134  * Configure the DMA controller, load the DMA descriptors, but don't start the
135  * DMA controller yet. Only issue the ATA command.
136  */
137 static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
138 {
139 	qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
140 }
141 
142 /*
143  * Execute the DMA transfer.
144  */
145 static void pxa_bmdma_start(struct ata_queued_cmd *qc)
146 {
147 	struct pata_pxa_data *pd = qc->ap->private_data;
148 	init_completion(&pd->dma_done);
149 	DCSR(pd->dma_channel) = DCSR_RUN;
150 }
151 
152 /*
153  * Wait until the DMA transfer completes, then stop the DMA controller.
154  */
155 static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
156 {
157 	struct pata_pxa_data *pd = qc->ap->private_data;
158 
159 	if ((DCSR(pd->dma_channel) & DCSR_RUN) &&
160 		wait_for_completion_timeout(&pd->dma_done, HZ))
161 		dev_err(qc->ap->dev, "Timeout waiting for DMA completion!");
162 
163 	DCSR(pd->dma_channel) = 0;
164 }
165 
166 /*
167  * Read DMA status. The bmdma_stop() will take care of properly finishing the
168  * DMA transfer so we always have DMA-complete interrupt here.
169  */
170 static unsigned char pxa_bmdma_status(struct ata_port *ap)
171 {
172 	struct pata_pxa_data *pd = ap->private_data;
173 	unsigned char ret = ATA_DMA_INTR;
174 
175 	if (pd->dma_dcsr & DCSR_BUSERR)
176 		ret |= ATA_DMA_ERR;
177 
178 	return ret;
179 }
180 
181 /*
182  * No IRQ register present so we do nothing.
183  */
184 static void pxa_irq_clear(struct ata_port *ap)
185 {
186 }
187 
188 /*
189  * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
190  * unclear why ATAPI has DMA issues.
191  */
192 static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
193 {
194 	return -EOPNOTSUPP;
195 }
196 
197 static struct scsi_host_template pxa_ata_sht = {
198 	ATA_BMDMA_SHT(DRV_NAME),
199 };
200 
201 static struct ata_port_operations pxa_ata_port_ops = {
202 	.inherits		= &ata_bmdma_port_ops,
203 	.cable_detect		= ata_cable_40wire,
204 
205 	.bmdma_setup		= pxa_bmdma_setup,
206 	.bmdma_start		= pxa_bmdma_start,
207 	.bmdma_stop		= pxa_bmdma_stop,
208 	.bmdma_status		= pxa_bmdma_status,
209 
210 	.check_atapi_dma	= pxa_check_atapi_dma,
211 
212 	.sff_irq_clear		= pxa_irq_clear,
213 
214 	.qc_prep		= pxa_qc_prep,
215 };
216 
217 /*
218  * DMA interrupt handler.
219  */
220 static void pxa_ata_dma_irq(int dma, void *port)
221 {
222 	struct ata_port *ap = port;
223 	struct pata_pxa_data *pd = ap->private_data;
224 
225 	pd->dma_dcsr = DCSR(dma);
226 	DCSR(dma) = pd->dma_dcsr;
227 
228 	if (pd->dma_dcsr & DCSR_STOPSTATE)
229 		complete(&pd->dma_done);
230 }
231 
232 static int pxa_ata_probe(struct platform_device *pdev)
233 {
234 	struct ata_host *host;
235 	struct ata_port *ap;
236 	struct pata_pxa_data *data;
237 	struct resource *cmd_res;
238 	struct resource *ctl_res;
239 	struct resource *dma_res;
240 	struct resource *irq_res;
241 	struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
242 	int ret = 0;
243 
244 	/*
245 	 * Resource validation, three resources are needed:
246 	 *  - CMD port base address
247 	 *  - CTL port base address
248 	 *  - DMA port base address
249 	 *  - IRQ pin
250 	 */
251 	if (pdev->num_resources != 4) {
252 		dev_err(&pdev->dev, "invalid number of resources\n");
253 		return -EINVAL;
254 	}
255 
256 	/*
257 	 * CMD port base address
258 	 */
259 	cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
260 	if (unlikely(cmd_res == NULL))
261 		return -EINVAL;
262 
263 	/*
264 	 * CTL port base address
265 	 */
266 	ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
267 	if (unlikely(ctl_res == NULL))
268 		return -EINVAL;
269 
270 	/*
271 	 * DMA port base address
272 	 */
273 	dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
274 	if (unlikely(dma_res == NULL))
275 		return -EINVAL;
276 
277 	/*
278 	 * IRQ pin
279 	 */
280 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
281 	if (unlikely(irq_res == NULL))
282 		return -EINVAL;
283 
284 	/*
285 	 * Allocate the host
286 	 */
287 	host = ata_host_alloc(&pdev->dev, 1);
288 	if (!host)
289 		return -ENOMEM;
290 
291 	ap		= host->ports[0];
292 	ap->ops		= &pxa_ata_port_ops;
293 	ap->pio_mask	= ATA_PIO4;
294 	ap->mwdma_mask	= ATA_MWDMA2;
295 
296 	ap->ioaddr.cmd_addr	= devm_ioremap(&pdev->dev, cmd_res->start,
297 						resource_size(cmd_res));
298 	ap->ioaddr.ctl_addr	= devm_ioremap(&pdev->dev, ctl_res->start,
299 						resource_size(ctl_res));
300 	ap->ioaddr.bmdma_addr	= devm_ioremap(&pdev->dev, dma_res->start,
301 						resource_size(dma_res));
302 
303 	/*
304 	 * Adjust register offsets
305 	 */
306 	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
307 	ap->ioaddr.data_addr	= ap->ioaddr.cmd_addr +
308 					(ATA_REG_DATA << pdata->reg_shift);
309 	ap->ioaddr.error_addr	= ap->ioaddr.cmd_addr +
310 					(ATA_REG_ERR << pdata->reg_shift);
311 	ap->ioaddr.feature_addr	= ap->ioaddr.cmd_addr +
312 					(ATA_REG_FEATURE << pdata->reg_shift);
313 	ap->ioaddr.nsect_addr	= ap->ioaddr.cmd_addr +
314 					(ATA_REG_NSECT << pdata->reg_shift);
315 	ap->ioaddr.lbal_addr	= ap->ioaddr.cmd_addr +
316 					(ATA_REG_LBAL << pdata->reg_shift);
317 	ap->ioaddr.lbam_addr	= ap->ioaddr.cmd_addr +
318 					(ATA_REG_LBAM << pdata->reg_shift);
319 	ap->ioaddr.lbah_addr	= ap->ioaddr.cmd_addr +
320 					(ATA_REG_LBAH << pdata->reg_shift);
321 	ap->ioaddr.device_addr	= ap->ioaddr.cmd_addr +
322 					(ATA_REG_DEVICE << pdata->reg_shift);
323 	ap->ioaddr.status_addr	= ap->ioaddr.cmd_addr +
324 					(ATA_REG_STATUS << pdata->reg_shift);
325 	ap->ioaddr.command_addr	= ap->ioaddr.cmd_addr +
326 					(ATA_REG_CMD << pdata->reg_shift);
327 
328 	/*
329 	 * Allocate and load driver's internal data structure
330 	 */
331 	data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
332 								GFP_KERNEL);
333 	if (!data)
334 		return -ENOMEM;
335 
336 	ap->private_data = data;
337 	data->dma_dreq = pdata->dma_dreq;
338 	data->dma_io_addr = dma_res->start;
339 
340 	/*
341 	 * Allocate space for the DMA descriptors
342 	 */
343 	data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
344 					&data->dma_desc_addr, GFP_KERNEL);
345 	if (!data->dma_desc)
346 		return -EINVAL;
347 
348 	/*
349 	 * Request the DMA channel
350 	 */
351 	data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW,
352 						pxa_ata_dma_irq, ap);
353 	if (data->dma_channel < 0)
354 		return -EBUSY;
355 
356 	/*
357 	 * Stop and clear the DMA channel
358 	 */
359 	DCSR(data->dma_channel) = 0;
360 
361 	/*
362 	 * Activate the ATA host
363 	 */
364 	ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
365 				pdata->irq_flags, &pxa_ata_sht);
366 	if (ret)
367 		pxa_free_dma(data->dma_channel);
368 
369 	return ret;
370 }
371 
372 static int pxa_ata_remove(struct platform_device *pdev)
373 {
374 	struct ata_host *host = platform_get_drvdata(pdev);
375 	struct pata_pxa_data *data = host->ports[0]->private_data;
376 
377 	pxa_free_dma(data->dma_channel);
378 
379 	ata_host_detach(host);
380 
381 	return 0;
382 }
383 
384 static struct platform_driver pxa_ata_driver = {
385 	.probe		= pxa_ata_probe,
386 	.remove		= pxa_ata_remove,
387 	.driver		= {
388 		.name		= DRV_NAME,
389 		.owner		= THIS_MODULE,
390 	},
391 };
392 
393 module_platform_driver(pxa_ata_driver);
394 
395 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
396 MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
397 MODULE_LICENSE("GPL");
398 MODULE_VERSION(DRV_VERSION);
399 MODULE_ALIAS("platform:" DRV_NAME);
400