1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * pata_netcell.c - Netcell PATA driver 4 * 5 * (c) 2006 Red Hat 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/pci.h> 11 #include <linux/blkdev.h> 12 #include <linux/delay.h> 13 #include <linux/device.h> 14 #include <scsi/scsi_host.h> 15 #include <linux/libata.h> 16 #include <linux/ata.h> 17 18 #define DRV_NAME "pata_netcell" 19 #define DRV_VERSION "0.1.7" 20 21 /* No PIO or DMA methods needed for this device */ 22 23 static unsigned int netcell_read_id(struct ata_device *adev, 24 struct ata_taskfile *tf, u16 *id) 25 { 26 unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); 27 /* Firmware forgets to mark words 85-87 valid */ 28 if (err_mask == 0) 29 id[ATA_ID_CSF_DEFAULT] |= 0x4000; 30 return err_mask; 31 } 32 33 static struct scsi_host_template netcell_sht = { 34 ATA_BMDMA_SHT(DRV_NAME), 35 }; 36 37 static struct ata_port_operations netcell_ops = { 38 .inherits = &ata_bmdma_port_ops, 39 .cable_detect = ata_cable_80wire, 40 .read_id = netcell_read_id, 41 }; 42 43 44 /** 45 * netcell_init_one - Register Netcell ATA PCI device with kernel services 46 * @pdev: PCI device to register 47 * @ent: Entry in netcell_pci_tbl matching with @pdev 48 * 49 * Called from kernel PCI layer. 50 * 51 * LOCKING: 52 * Inherited from PCI layer (may sleep). 53 * 54 * RETURNS: 55 * Zero on success, or -ERRNO value. 56 */ 57 58 static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) 59 { 60 static const struct ata_port_info info = { 61 .flags = ATA_FLAG_SLAVE_POSS, 62 /* Actually we don't really care about these as the 63 firmware deals with it */ 64 .pio_mask = ATA_PIO4, 65 .mwdma_mask = ATA_MWDMA2, 66 .udma_mask = ATA_UDMA5, /* UDMA 133 */ 67 .port_ops = &netcell_ops, 68 }; 69 const struct ata_port_info *port_info[] = { &info, NULL }; 70 int rc; 71 72 ata_print_version_once(&pdev->dev, DRV_VERSION); 73 74 rc = pcim_enable_device(pdev); 75 if (rc) 76 return rc; 77 78 /* Any chip specific setup/optimisation/messages here */ 79 ata_pci_bmdma_clear_simplex(pdev); 80 81 /* And let the library code do the work */ 82 return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0); 83 } 84 85 static const struct pci_device_id netcell_pci_tbl[] = { 86 { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), }, 87 88 { } /* terminate list */ 89 }; 90 91 static struct pci_driver netcell_pci_driver = { 92 .name = DRV_NAME, 93 .id_table = netcell_pci_tbl, 94 .probe = netcell_init_one, 95 .remove = ata_pci_remove_one, 96 #ifdef CONFIG_PM_SLEEP 97 .suspend = ata_pci_device_suspend, 98 .resume = ata_pci_device_resume, 99 #endif 100 }; 101 102 module_pci_driver(netcell_pci_driver); 103 104 MODULE_AUTHOR("Alan Cox"); 105 MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID"); 106 MODULE_LICENSE("GPL"); 107 MODULE_DEVICE_TABLE(pci, netcell_pci_tbl); 108 MODULE_VERSION(DRV_VERSION); 109