1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Libata based driver for Apple "macio" family of PATA controllers 4 * 5 * Copyright 2008/2009 Benjamin Herrenschmidt, IBM Corp 6 * <benh@kernel.crashing.org> 7 * 8 * Some bits and pieces from drivers/ide/ppc/pmac.c 9 * 10 */ 11 12 #undef DEBUG 13 #undef DEBUG_DMA 14 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/init.h> 18 #include <linux/blkdev.h> 19 #include <linux/ata.h> 20 #include <linux/libata.h> 21 #include <linux/adb.h> 22 #include <linux/pmu.h> 23 #include <linux/scatterlist.h> 24 #include <linux/irqdomain.h> 25 #include <linux/of.h> 26 #include <linux/gfp.h> 27 #include <linux/pci.h> 28 29 #include <scsi/scsi.h> 30 #include <scsi/scsi_host.h> 31 #include <scsi/scsi_device.h> 32 33 #include <asm/macio.h> 34 #include <asm/io.h> 35 #include <asm/dbdma.h> 36 #include <asm/machdep.h> 37 #include <asm/pmac_feature.h> 38 #include <asm/mediabay.h> 39 40 #ifdef DEBUG_DMA 41 #define dev_dbgdma(dev, format, arg...) \ 42 dev_printk(KERN_DEBUG , dev , format , ## arg) 43 #else 44 #define dev_dbgdma(dev, format, arg...) \ 45 ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; }) 46 #endif 47 48 #define DRV_NAME "pata_macio" 49 #define DRV_VERSION "0.9" 50 51 /* Models of macio ATA controller */ 52 enum { 53 controller_ohare, /* OHare based */ 54 controller_heathrow, /* Heathrow/Paddington */ 55 controller_kl_ata3, /* KeyLargo ATA-3 */ 56 controller_kl_ata4, /* KeyLargo ATA-4 */ 57 controller_un_ata6, /* UniNorth2 ATA-6 */ 58 controller_k2_ata6, /* K2 ATA-6 */ 59 controller_sh_ata6, /* Shasta ATA-6 */ 60 }; 61 62 static const char* macio_ata_names[] = { 63 "OHare ATA", /* OHare based */ 64 "Heathrow ATA", /* Heathrow/Paddington */ 65 "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */ 66 "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */ 67 "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */ 68 "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */ 69 "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */ 70 }; 71 72 /* 73 * Extra registers, both 32-bit little-endian 74 */ 75 #define IDE_TIMING_CONFIG 0x200 76 #define IDE_INTERRUPT 0x300 77 78 /* Kauai (U2) ATA has different register setup */ 79 #define IDE_KAUAI_PIO_CONFIG 0x200 80 #define IDE_KAUAI_ULTRA_CONFIG 0x210 81 #define IDE_KAUAI_POLL_CONFIG 0x220 82 83 /* 84 * Timing configuration register definitions 85 */ 86 87 /* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */ 88 #define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS) 89 #define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS) 90 #define IDE_SYSCLK_NS 30 /* 33Mhz cell */ 91 #define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */ 92 93 /* 133Mhz cell, found in shasta. 94 * See comments about 100 Mhz Uninorth 2... 95 * Note that PIO_MASK and MDMA_MASK seem to overlap, that's just 96 * weird and I don't now why .. at this stage 97 */ 98 #define TR_133_PIOREG_PIO_MASK 0xff000fff 99 #define TR_133_PIOREG_MDMA_MASK 0x00fff800 100 #define TR_133_UDMAREG_UDMA_MASK 0x0003ffff 101 #define TR_133_UDMAREG_UDMA_EN 0x00000001 102 103 /* 100Mhz cell, found in Uninorth 2 and K2. It appears as a pci device 104 * (106b/0033) on uninorth or K2 internal PCI bus and it's clock is 105 * controlled like gem or fw. It appears to be an evolution of keylargo 106 * ATA4 with a timing register extended to 2x32bits registers (one 107 * for PIO & MWDMA and one for UDMA, and a similar DBDMA channel. 108 * It has it's own local feature control register as well. 109 * 110 * After scratching my mind over the timing values, at least for PIO 111 * and MDMA, I think I've figured the format of the timing register, 112 * though I use pre-calculated tables for UDMA as usual... 113 */ 114 #define TR_100_PIO_ADDRSETUP_MASK 0xff000000 /* Size of field unknown */ 115 #define TR_100_PIO_ADDRSETUP_SHIFT 24 116 #define TR_100_MDMA_MASK 0x00fff000 117 #define TR_100_MDMA_RECOVERY_MASK 0x00fc0000 118 #define TR_100_MDMA_RECOVERY_SHIFT 18 119 #define TR_100_MDMA_ACCESS_MASK 0x0003f000 120 #define TR_100_MDMA_ACCESS_SHIFT 12 121 #define TR_100_PIO_MASK 0xff000fff 122 #define TR_100_PIO_RECOVERY_MASK 0x00000fc0 123 #define TR_100_PIO_RECOVERY_SHIFT 6 124 #define TR_100_PIO_ACCESS_MASK 0x0000003f 125 #define TR_100_PIO_ACCESS_SHIFT 0 126 127 #define TR_100_UDMAREG_UDMA_MASK 0x0000ffff 128 #define TR_100_UDMAREG_UDMA_EN 0x00000001 129 130 131 /* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on 132 * 40 connector cable and to 4 on 80 connector one. 133 * Clock unit is 15ns (66Mhz) 134 * 135 * 3 Values can be programmed: 136 * - Write data setup, which appears to match the cycle time. They 137 * also call it DIOW setup. 138 * - Ready to pause time (from spec) 139 * - Address setup. That one is weird. I don't see where exactly 140 * it fits in UDMA cycles, I got it's name from an obscure piece 141 * of commented out code in Darwin. They leave it to 0, we do as 142 * well, despite a comment that would lead to think it has a 143 * min value of 45ns. 144 * Apple also add 60ns to the write data setup (or cycle time ?) on 145 * reads. 146 */ 147 #define TR_66_UDMA_MASK 0xfff00000 148 #define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */ 149 #define TR_66_PIO_ADDRSETUP_MASK 0xe0000000 /* Address setup */ 150 #define TR_66_PIO_ADDRSETUP_SHIFT 29 151 #define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */ 152 #define TR_66_UDMA_RDY2PAUS_SHIFT 25 153 #define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */ 154 #define TR_66_UDMA_WRDATASETUP_SHIFT 21 155 #define TR_66_MDMA_MASK 0x000ffc00 156 #define TR_66_MDMA_RECOVERY_MASK 0x000f8000 157 #define TR_66_MDMA_RECOVERY_SHIFT 15 158 #define TR_66_MDMA_ACCESS_MASK 0x00007c00 159 #define TR_66_MDMA_ACCESS_SHIFT 10 160 #define TR_66_PIO_MASK 0xe00003ff 161 #define TR_66_PIO_RECOVERY_MASK 0x000003e0 162 #define TR_66_PIO_RECOVERY_SHIFT 5 163 #define TR_66_PIO_ACCESS_MASK 0x0000001f 164 #define TR_66_PIO_ACCESS_SHIFT 0 165 166 /* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo 167 * Can do pio & mdma modes, clock unit is 30ns (33Mhz) 168 * 169 * The access time and recovery time can be programmed. Some older 170 * Darwin code base limit OHare to 150ns cycle time. I decided to do 171 * the same here fore safety against broken old hardware ;) 172 * The HalfTick bit, when set, adds half a clock (15ns) to the access 173 * time and removes one from recovery. It's not supported on KeyLargo 174 * implementation afaik. The E bit appears to be set for PIO mode 0 and 175 * is used to reach long timings used in this mode. 176 */ 177 #define TR_33_MDMA_MASK 0x003ff800 178 #define TR_33_MDMA_RECOVERY_MASK 0x001f0000 179 #define TR_33_MDMA_RECOVERY_SHIFT 16 180 #define TR_33_MDMA_ACCESS_MASK 0x0000f800 181 #define TR_33_MDMA_ACCESS_SHIFT 11 182 #define TR_33_MDMA_HALFTICK 0x00200000 183 #define TR_33_PIO_MASK 0x000007ff 184 #define TR_33_PIO_E 0x00000400 185 #define TR_33_PIO_RECOVERY_MASK 0x000003e0 186 #define TR_33_PIO_RECOVERY_SHIFT 5 187 #define TR_33_PIO_ACCESS_MASK 0x0000001f 188 #define TR_33_PIO_ACCESS_SHIFT 0 189 190 /* 191 * Interrupt register definitions. Only present on newer cells 192 * (Keylargo and later afaik) so we don't use it. 193 */ 194 #define IDE_INTR_DMA 0x80000000 195 #define IDE_INTR_DEVICE 0x40000000 196 197 /* 198 * FCR Register on Kauai. Not sure what bit 0x4 is ... 199 */ 200 #define KAUAI_FCR_UATA_MAGIC 0x00000004 201 #define KAUAI_FCR_UATA_RESET_N 0x00000002 202 #define KAUAI_FCR_UATA_ENABLE 0x00000001 203 204 205 /* Allow up to 256 DBDMA commands per xfer */ 206 #define MAX_DCMDS 256 207 208 /* Don't let a DMA segment go all the way to 64K */ 209 #define MAX_DBDMA_SEG 0xff00 210 211 212 /* 213 * Wait 1s for disk to answer on IDE bus after a hard reset 214 * of the device (via GPIO/FCR). 215 * 216 * Some devices seem to "pollute" the bus even after dropping 217 * the BSY bit (typically some combo drives slave on the UDMA 218 * bus) after a hard reset. Since we hard reset all drives on 219 * KeyLargo ATA66, we have to keep that delay around. I may end 220 * up not hard resetting anymore on these and keep the delay only 221 * for older interfaces instead (we have to reset when coming 222 * from MacOS...) --BenH. 223 */ 224 #define IDE_WAKEUP_DELAY_MS 1000 225 226 struct pata_macio_timing; 227 228 struct pata_macio_priv { 229 int kind; 230 int aapl_bus_id; 231 int mediabay : 1; 232 struct device_node *node; 233 struct macio_dev *mdev; 234 struct pci_dev *pdev; 235 struct device *dev; 236 int irq; 237 u32 treg[2][2]; 238 void __iomem *tfregs; 239 void __iomem *kauai_fcr; 240 struct dbdma_cmd * dma_table_cpu; 241 dma_addr_t dma_table_dma; 242 struct ata_host *host; 243 const struct pata_macio_timing *timings; 244 }; 245 246 /* Previous variants of this driver used to calculate timings 247 * for various variants of the chip and use tables for others. 248 * 249 * Not only was this confusing, but in addition, it isn't clear 250 * whether our calculation code was correct. It didn't entirely 251 * match the darwin code and whatever documentation I could find 252 * on these cells 253 * 254 * I decided to entirely rely on a table instead for this version 255 * of the driver. Also, because I don't really care about derated 256 * modes and really old HW other than making it work, I'm not going 257 * to calculate / snoop timing values for something else than the 258 * standard modes. 259 */ 260 struct pata_macio_timing { 261 int mode; 262 u32 reg1; /* Bits to set in first timing reg */ 263 u32 reg2; /* Bits to set in second timing reg */ 264 }; 265 266 static const struct pata_macio_timing pata_macio_ohare_timings[] = { 267 { XFER_PIO_0, 0x00000526, 0, }, 268 { XFER_PIO_1, 0x00000085, 0, }, 269 { XFER_PIO_2, 0x00000025, 0, }, 270 { XFER_PIO_3, 0x00000025, 0, }, 271 { XFER_PIO_4, 0x00000025, 0, }, 272 { XFER_MW_DMA_0, 0x00074000, 0, }, 273 { XFER_MW_DMA_1, 0x00221000, 0, }, 274 { XFER_MW_DMA_2, 0x00211000, 0, }, 275 { -1, 0, 0 } 276 }; 277 278 static const struct pata_macio_timing pata_macio_heathrow_timings[] = { 279 { XFER_PIO_0, 0x00000526, 0, }, 280 { XFER_PIO_1, 0x00000085, 0, }, 281 { XFER_PIO_2, 0x00000025, 0, }, 282 { XFER_PIO_3, 0x00000025, 0, }, 283 { XFER_PIO_4, 0x00000025, 0, }, 284 { XFER_MW_DMA_0, 0x00074000, 0, }, 285 { XFER_MW_DMA_1, 0x00221000, 0, }, 286 { XFER_MW_DMA_2, 0x00211000, 0, }, 287 { -1, 0, 0 } 288 }; 289 290 static const struct pata_macio_timing pata_macio_kl33_timings[] = { 291 { XFER_PIO_0, 0x00000526, 0, }, 292 { XFER_PIO_1, 0x00000085, 0, }, 293 { XFER_PIO_2, 0x00000025, 0, }, 294 { XFER_PIO_3, 0x00000025, 0, }, 295 { XFER_PIO_4, 0x00000025, 0, }, 296 { XFER_MW_DMA_0, 0x00084000, 0, }, 297 { XFER_MW_DMA_1, 0x00021800, 0, }, 298 { XFER_MW_DMA_2, 0x00011800, 0, }, 299 { -1, 0, 0 } 300 }; 301 302 static const struct pata_macio_timing pata_macio_kl66_timings[] = { 303 { XFER_PIO_0, 0x0000038c, 0, }, 304 { XFER_PIO_1, 0x0000020a, 0, }, 305 { XFER_PIO_2, 0x00000127, 0, }, 306 { XFER_PIO_3, 0x000000c6, 0, }, 307 { XFER_PIO_4, 0x00000065, 0, }, 308 { XFER_MW_DMA_0, 0x00084000, 0, }, 309 { XFER_MW_DMA_1, 0x00029800, 0, }, 310 { XFER_MW_DMA_2, 0x00019400, 0, }, 311 { XFER_UDMA_0, 0x19100000, 0, }, 312 { XFER_UDMA_1, 0x14d00000, 0, }, 313 { XFER_UDMA_2, 0x10900000, 0, }, 314 { XFER_UDMA_3, 0x0c700000, 0, }, 315 { XFER_UDMA_4, 0x0c500000, 0, }, 316 { -1, 0, 0 } 317 }; 318 319 static const struct pata_macio_timing pata_macio_kauai_timings[] = { 320 { XFER_PIO_0, 0x08000a92, 0, }, 321 { XFER_PIO_1, 0x0800060f, 0, }, 322 { XFER_PIO_2, 0x0800038b, 0, }, 323 { XFER_PIO_3, 0x05000249, 0, }, 324 { XFER_PIO_4, 0x04000148, 0, }, 325 { XFER_MW_DMA_0, 0x00618000, 0, }, 326 { XFER_MW_DMA_1, 0x00209000, 0, }, 327 { XFER_MW_DMA_2, 0x00148000, 0, }, 328 { XFER_UDMA_0, 0, 0x000070c1, }, 329 { XFER_UDMA_1, 0, 0x00005d81, }, 330 { XFER_UDMA_2, 0, 0x00004a61, }, 331 { XFER_UDMA_3, 0, 0x00003a51, }, 332 { XFER_UDMA_4, 0, 0x00002a31, }, 333 { XFER_UDMA_5, 0, 0x00002921, }, 334 { -1, 0, 0 } 335 }; 336 337 static const struct pata_macio_timing pata_macio_shasta_timings[] = { 338 { XFER_PIO_0, 0x0a000c97, 0, }, 339 { XFER_PIO_1, 0x07000712, 0, }, 340 { XFER_PIO_2, 0x040003cd, 0, }, 341 { XFER_PIO_3, 0x0500028b, 0, }, 342 { XFER_PIO_4, 0x0400010a, 0, }, 343 { XFER_MW_DMA_0, 0x00820800, 0, }, 344 { XFER_MW_DMA_1, 0x0028b000, 0, }, 345 { XFER_MW_DMA_2, 0x001ca000, 0, }, 346 { XFER_UDMA_0, 0, 0x00035901, }, 347 { XFER_UDMA_1, 0, 0x000348b1, }, 348 { XFER_UDMA_2, 0, 0x00033881, }, 349 { XFER_UDMA_3, 0, 0x00033861, }, 350 { XFER_UDMA_4, 0, 0x00033841, }, 351 { XFER_UDMA_5, 0, 0x00033031, }, 352 { XFER_UDMA_6, 0, 0x00033021, }, 353 { -1, 0, 0 } 354 }; 355 356 static const struct pata_macio_timing *pata_macio_find_timing( 357 struct pata_macio_priv *priv, 358 int mode) 359 { 360 int i; 361 362 for (i = 0; priv->timings[i].mode > 0; i++) { 363 if (priv->timings[i].mode == mode) 364 return &priv->timings[i]; 365 } 366 return NULL; 367 } 368 369 370 static void pata_macio_apply_timings(struct ata_port *ap, unsigned int device) 371 { 372 struct pata_macio_priv *priv = ap->private_data; 373 void __iomem *rbase = ap->ioaddr.cmd_addr; 374 375 if (priv->kind == controller_sh_ata6 || 376 priv->kind == controller_un_ata6 || 377 priv->kind == controller_k2_ata6) { 378 writel(priv->treg[device][0], rbase + IDE_KAUAI_PIO_CONFIG); 379 writel(priv->treg[device][1], rbase + IDE_KAUAI_ULTRA_CONFIG); 380 } else 381 writel(priv->treg[device][0], rbase + IDE_TIMING_CONFIG); 382 } 383 384 static void pata_macio_dev_select(struct ata_port *ap, unsigned int device) 385 { 386 ata_sff_dev_select(ap, device); 387 388 /* Apply timings */ 389 pata_macio_apply_timings(ap, device); 390 } 391 392 static void pata_macio_set_timings(struct ata_port *ap, 393 struct ata_device *adev) 394 { 395 struct pata_macio_priv *priv = ap->private_data; 396 const struct pata_macio_timing *t; 397 398 dev_dbg(priv->dev, "Set timings: DEV=%d,PIO=0x%x (%s),DMA=0x%x (%s)\n", 399 adev->devno, 400 adev->pio_mode, 401 ata_mode_string(ata_xfer_mode2mask(adev->pio_mode)), 402 adev->dma_mode, 403 ata_mode_string(ata_xfer_mode2mask(adev->dma_mode))); 404 405 /* First clear timings */ 406 priv->treg[adev->devno][0] = priv->treg[adev->devno][1] = 0; 407 408 /* Now get the PIO timings */ 409 t = pata_macio_find_timing(priv, adev->pio_mode); 410 if (t == NULL) { 411 dev_warn(priv->dev, "Invalid PIO timing requested: 0x%x\n", 412 adev->pio_mode); 413 t = pata_macio_find_timing(priv, XFER_PIO_0); 414 } 415 BUG_ON(t == NULL); 416 417 /* PIO timings only ever use the first treg */ 418 priv->treg[adev->devno][0] |= t->reg1; 419 420 /* Now get DMA timings */ 421 t = pata_macio_find_timing(priv, adev->dma_mode); 422 if (t == NULL || (t->reg1 == 0 && t->reg2 == 0)) { 423 dev_dbg(priv->dev, "DMA timing not set yet, using MW_DMA_0\n"); 424 t = pata_macio_find_timing(priv, XFER_MW_DMA_0); 425 } 426 BUG_ON(t == NULL); 427 428 /* DMA timings can use both tregs */ 429 priv->treg[adev->devno][0] |= t->reg1; 430 priv->treg[adev->devno][1] |= t->reg2; 431 432 dev_dbg(priv->dev, " -> %08x %08x\n", 433 priv->treg[adev->devno][0], 434 priv->treg[adev->devno][1]); 435 436 /* Apply to hardware */ 437 pata_macio_apply_timings(ap, adev->devno); 438 } 439 440 /* 441 * Blast some well known "safe" values to the timing registers at init or 442 * wakeup from sleep time, before we do real calculation 443 */ 444 static void pata_macio_default_timings(struct pata_macio_priv *priv) 445 { 446 unsigned int value, value2 = 0; 447 448 switch(priv->kind) { 449 case controller_sh_ata6: 450 value = 0x0a820c97; 451 value2 = 0x00033031; 452 break; 453 case controller_un_ata6: 454 case controller_k2_ata6: 455 value = 0x08618a92; 456 value2 = 0x00002921; 457 break; 458 case controller_kl_ata4: 459 value = 0x0008438c; 460 break; 461 case controller_kl_ata3: 462 value = 0x00084526; 463 break; 464 case controller_heathrow: 465 case controller_ohare: 466 default: 467 value = 0x00074526; 468 break; 469 } 470 priv->treg[0][0] = priv->treg[1][0] = value; 471 priv->treg[0][1] = priv->treg[1][1] = value2; 472 } 473 474 static int pata_macio_cable_detect(struct ata_port *ap) 475 { 476 struct pata_macio_priv *priv = ap->private_data; 477 478 /* Get cable type from device-tree */ 479 if (priv->kind == controller_kl_ata4 || 480 priv->kind == controller_un_ata6 || 481 priv->kind == controller_k2_ata6 || 482 priv->kind == controller_sh_ata6) { 483 const char* cable = of_get_property(priv->node, "cable-type", 484 NULL); 485 struct device_node *root = of_find_node_by_path("/"); 486 const char *model = of_get_property(root, "model", NULL); 487 488 of_node_put(root); 489 490 if (cable && !strncmp(cable, "80-", 3)) { 491 /* Some drives fail to detect 80c cable in PowerBook 492 * These machine use proprietary short IDE cable 493 * anyway 494 */ 495 if (!strncmp(model, "PowerBook", 9)) 496 return ATA_CBL_PATA40_SHORT; 497 else 498 return ATA_CBL_PATA80; 499 } 500 } 501 502 /* G5's seem to have incorrect cable type in device-tree. 503 * Let's assume they always have a 80 conductor cable, this seem to 504 * be always the case unless the user mucked around 505 */ 506 if (of_device_is_compatible(priv->node, "K2-UATA") || 507 of_device_is_compatible(priv->node, "shasta-ata")) 508 return ATA_CBL_PATA80; 509 510 /* Anything else is 40 connectors */ 511 return ATA_CBL_PATA40; 512 } 513 514 static enum ata_completion_errors pata_macio_qc_prep(struct ata_queued_cmd *qc) 515 { 516 unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE); 517 struct ata_port *ap = qc->ap; 518 struct pata_macio_priv *priv = ap->private_data; 519 struct scatterlist *sg; 520 struct dbdma_cmd *table; 521 unsigned int si, pi; 522 523 dev_dbgdma(priv->dev, "%s: qc %p flags %lx, write %d dev %d\n", 524 __func__, qc, qc->flags, write, qc->dev->devno); 525 526 if (!(qc->flags & ATA_QCFLAG_DMAMAP)) 527 return AC_ERR_OK; 528 529 table = (struct dbdma_cmd *) priv->dma_table_cpu; 530 531 pi = 0; 532 for_each_sg(qc->sg, sg, qc->n_elem, si) { 533 u32 addr, sg_len, len; 534 535 /* determine if physical DMA addr spans 64K boundary. 536 * Note h/w doesn't support 64-bit, so we unconditionally 537 * truncate dma_addr_t to u32. 538 */ 539 addr = (u32) sg_dma_address(sg); 540 sg_len = sg_dma_len(sg); 541 542 while (sg_len) { 543 /* table overflow should never happen */ 544 if (WARN_ON_ONCE(pi >= MAX_DCMDS)) 545 return AC_ERR_SYSTEM; 546 547 len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG; 548 table->command = cpu_to_le16(write ? OUTPUT_MORE: INPUT_MORE); 549 table->req_count = cpu_to_le16(len); 550 table->phy_addr = cpu_to_le32(addr); 551 table->cmd_dep = 0; 552 table->xfer_status = 0; 553 table->res_count = 0; 554 addr += len; 555 sg_len -= len; 556 ++table; 557 ++pi; 558 } 559 } 560 561 /* Should never happen according to Tejun */ 562 if (WARN_ON_ONCE(!pi)) 563 return AC_ERR_SYSTEM; 564 565 /* Convert the last command to an input/output */ 566 table--; 567 table->command = cpu_to_le16(write ? OUTPUT_LAST: INPUT_LAST); 568 table++; 569 570 /* Add the stop command to the end of the list */ 571 memset(table, 0, sizeof(struct dbdma_cmd)); 572 table->command = cpu_to_le16(DBDMA_STOP); 573 574 dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi); 575 576 return AC_ERR_OK; 577 } 578 579 580 static void pata_macio_freeze(struct ata_port *ap) 581 { 582 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 583 584 if (dma_regs) { 585 unsigned int timeout = 1000000; 586 587 /* Make sure DMA controller is stopped */ 588 writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma_regs->control); 589 while (--timeout && (readl(&dma_regs->status) & RUN)) 590 udelay(1); 591 } 592 593 ata_sff_freeze(ap); 594 } 595 596 597 static void pata_macio_bmdma_setup(struct ata_queued_cmd *qc) 598 { 599 struct ata_port *ap = qc->ap; 600 struct pata_macio_priv *priv = ap->private_data; 601 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 602 int dev = qc->dev->devno; 603 604 dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); 605 606 /* Make sure DMA commands updates are visible */ 607 writel(priv->dma_table_dma, &dma_regs->cmdptr); 608 609 /* On KeyLargo 66Mhz cell, we need to add 60ns to wrDataSetup on 610 * UDMA reads 611 */ 612 if (priv->kind == controller_kl_ata4 && 613 (priv->treg[dev][0] & TR_66_UDMA_EN)) { 614 void __iomem *rbase = ap->ioaddr.cmd_addr; 615 u32 reg = priv->treg[dev][0]; 616 617 if (!(qc->tf.flags & ATA_TFLAG_WRITE)) 618 reg += 0x00800000; 619 writel(reg, rbase + IDE_TIMING_CONFIG); 620 } 621 622 /* issue r/w command */ 623 ap->ops->sff_exec_command(ap, &qc->tf); 624 } 625 626 static void pata_macio_bmdma_start(struct ata_queued_cmd *qc) 627 { 628 struct ata_port *ap = qc->ap; 629 struct pata_macio_priv *priv = ap->private_data; 630 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 631 632 dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); 633 634 writel((RUN << 16) | RUN, &dma_regs->control); 635 /* Make sure it gets to the controller right now */ 636 (void)readl(&dma_regs->control); 637 } 638 639 static void pata_macio_bmdma_stop(struct ata_queued_cmd *qc) 640 { 641 struct ata_port *ap = qc->ap; 642 struct pata_macio_priv *priv = ap->private_data; 643 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 644 unsigned int timeout = 1000000; 645 646 dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc); 647 648 /* Stop the DMA engine and wait for it to full halt */ 649 writel (((RUN|WAKE|DEAD) << 16), &dma_regs->control); 650 while (--timeout && (readl(&dma_regs->status) & RUN)) 651 udelay(1); 652 } 653 654 static u8 pata_macio_bmdma_status(struct ata_port *ap) 655 { 656 struct pata_macio_priv *priv = ap->private_data; 657 struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr; 658 u32 dstat, rstat = ATA_DMA_INTR; 659 unsigned long timeout = 0; 660 661 dstat = readl(&dma_regs->status); 662 663 dev_dbgdma(priv->dev, "%s: dstat=%x\n", __func__, dstat); 664 665 /* We have two things to deal with here: 666 * 667 * - The dbdma won't stop if the command was started 668 * but completed with an error without transferring all 669 * datas. This happens when bad blocks are met during 670 * a multi-block transfer. 671 * 672 * - The dbdma fifo hasn't yet finished flushing to 673 * system memory when the disk interrupt occurs. 674 */ 675 676 /* First check for errors */ 677 if ((dstat & (RUN|DEAD)) != RUN) 678 rstat |= ATA_DMA_ERR; 679 680 /* If ACTIVE is cleared, the STOP command has been hit and 681 * the transfer is complete. If not, we have to flush the 682 * channel. 683 */ 684 if ((dstat & ACTIVE) == 0) 685 return rstat; 686 687 dev_dbgdma(priv->dev, "%s: DMA still active, flushing...\n", __func__); 688 689 /* If dbdma didn't execute the STOP command yet, the 690 * active bit is still set. We consider that we aren't 691 * sharing interrupts (which is hopefully the case with 692 * those controllers) and so we just try to flush the 693 * channel for pending data in the fifo 694 */ 695 udelay(1); 696 writel((FLUSH << 16) | FLUSH, &dma_regs->control); 697 for (;;) { 698 udelay(1); 699 dstat = readl(&dma_regs->status); 700 if ((dstat & FLUSH) == 0) 701 break; 702 if (++timeout > 1000) { 703 dev_warn(priv->dev, "timeout flushing DMA\n"); 704 rstat |= ATA_DMA_ERR; 705 break; 706 } 707 } 708 return rstat; 709 } 710 711 /* port_start is when we allocate the DMA command list */ 712 static int pata_macio_port_start(struct ata_port *ap) 713 { 714 struct pata_macio_priv *priv = ap->private_data; 715 716 if (ap->ioaddr.bmdma_addr == NULL) 717 return 0; 718 719 /* Allocate space for the DBDMA commands. 720 * 721 * The +2 is +1 for the stop command and +1 to allow for 722 * aligning the start address to a multiple of 16 bytes. 723 */ 724 priv->dma_table_cpu = 725 dmam_alloc_coherent(priv->dev, 726 (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), 727 &priv->dma_table_dma, GFP_KERNEL); 728 if (priv->dma_table_cpu == NULL) { 729 dev_err(priv->dev, "Unable to allocate DMA command list\n"); 730 ap->ioaddr.bmdma_addr = NULL; 731 ap->mwdma_mask = 0; 732 ap->udma_mask = 0; 733 } 734 return 0; 735 } 736 737 static void pata_macio_irq_clear(struct ata_port *ap) 738 { 739 struct pata_macio_priv *priv = ap->private_data; 740 741 /* Nothing to do here */ 742 743 dev_dbgdma(priv->dev, "%s\n", __func__); 744 } 745 746 static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume) 747 { 748 dev_dbg(priv->dev, "Enabling & resetting... \n"); 749 750 if (priv->mediabay) 751 return; 752 753 if (priv->kind == controller_ohare && !resume) { 754 /* The code below is having trouble on some ohare machines 755 * (timing related ?). Until I can put my hand on one of these 756 * units, I keep the old way 757 */ 758 ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 0, 1); 759 } else { 760 int rc; 761 762 /* Reset and enable controller */ 763 rc = ppc_md.feature_call(PMAC_FTR_IDE_RESET, 764 priv->node, priv->aapl_bus_id, 1); 765 ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, 766 priv->node, priv->aapl_bus_id, 1); 767 msleep(10); 768 /* Only bother waiting if there's a reset control */ 769 if (rc == 0) { 770 ppc_md.feature_call(PMAC_FTR_IDE_RESET, 771 priv->node, priv->aapl_bus_id, 0); 772 msleep(IDE_WAKEUP_DELAY_MS); 773 } 774 } 775 776 /* If resuming a PCI device, restore the config space here */ 777 if (priv->pdev && resume) { 778 int rc; 779 780 pci_restore_state(priv->pdev); 781 rc = pcim_enable_device(priv->pdev); 782 if (rc) 783 dev_err(&priv->pdev->dev, 784 "Failed to enable device after resume (%d)\n", 785 rc); 786 else 787 pci_set_master(priv->pdev); 788 } 789 790 /* On Kauai, initialize the FCR. We don't perform a reset, doesn't really 791 * seem necessary and speeds up the boot process 792 */ 793 if (priv->kauai_fcr) 794 writel(KAUAI_FCR_UATA_MAGIC | 795 KAUAI_FCR_UATA_RESET_N | 796 KAUAI_FCR_UATA_ENABLE, priv->kauai_fcr); 797 } 798 799 /* Hook the standard slave config to fixup some HW related alignment 800 * restrictions 801 */ 802 static int pata_macio_slave_config(struct scsi_device *sdev) 803 { 804 struct ata_port *ap = ata_shost_to_port(sdev->host); 805 struct pata_macio_priv *priv = ap->private_data; 806 struct ata_device *dev; 807 u16 cmd; 808 int rc; 809 810 /* First call original */ 811 rc = ata_scsi_slave_config(sdev); 812 if (rc) 813 return rc; 814 815 /* This is lifted from sata_nv */ 816 dev = &ap->link.device[sdev->id]; 817 818 /* OHare has issues with non cache aligned DMA on some chipsets */ 819 if (priv->kind == controller_ohare) { 820 blk_queue_update_dma_alignment(sdev->request_queue, 31); 821 blk_queue_update_dma_pad(sdev->request_queue, 31); 822 823 /* Tell the world about it */ 824 ata_dev_info(dev, "OHare alignment limits applied\n"); 825 return 0; 826 } 827 828 /* We only have issues with ATAPI */ 829 if (dev->class != ATA_DEV_ATAPI) 830 return 0; 831 832 /* Shasta and K2 seem to have "issues" with reads ... */ 833 if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) { 834 /* Allright these are bad, apply restrictions */ 835 blk_queue_update_dma_alignment(sdev->request_queue, 15); 836 blk_queue_update_dma_pad(sdev->request_queue, 15); 837 838 /* We enable MWI and hack cache line size directly here, this 839 * is specific to this chipset and not normal values, we happen 840 * to somewhat know what we are doing here (which is basically 841 * to do the same Apple does and pray they did not get it wrong :-) 842 */ 843 BUG_ON(!priv->pdev); 844 pci_write_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, 0x08); 845 pci_read_config_word(priv->pdev, PCI_COMMAND, &cmd); 846 pci_write_config_word(priv->pdev, PCI_COMMAND, 847 cmd | PCI_COMMAND_INVALIDATE); 848 849 /* Tell the world about it */ 850 ata_dev_info(dev, "K2/Shasta alignment limits applied\n"); 851 } 852 853 return 0; 854 } 855 856 #ifdef CONFIG_PM_SLEEP 857 static int pata_macio_do_suspend(struct pata_macio_priv *priv, pm_message_t mesg) 858 { 859 /* First, core libata suspend to do most of the work */ 860 ata_host_suspend(priv->host, mesg); 861 862 /* Restore to default timings */ 863 pata_macio_default_timings(priv); 864 865 /* Mask interrupt. Not strictly necessary but old driver did 866 * it and I'd rather not change that here */ 867 disable_irq(priv->irq); 868 869 /* The media bay will handle itself just fine */ 870 if (priv->mediabay) 871 return 0; 872 873 /* Kauai has bus control FCRs directly here */ 874 if (priv->kauai_fcr) { 875 u32 fcr = readl(priv->kauai_fcr); 876 fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE); 877 writel(fcr, priv->kauai_fcr); 878 } 879 880 /* For PCI, save state and disable DMA. No need to call 881 * pci_set_power_state(), the HW doesn't do D states that 882 * way, the platform code will take care of suspending the 883 * ASIC properly 884 */ 885 if (priv->pdev) { 886 pci_save_state(priv->pdev); 887 pci_disable_device(priv->pdev); 888 } 889 890 /* Disable the bus on older machines and the cell on kauai */ 891 ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 892 priv->aapl_bus_id, 0); 893 894 return 0; 895 } 896 897 static int pata_macio_do_resume(struct pata_macio_priv *priv) 898 { 899 /* Reset and re-enable the HW */ 900 pata_macio_reset_hw(priv, 1); 901 902 /* Sanitize drive timings */ 903 pata_macio_apply_timings(priv->host->ports[0], 0); 904 905 /* We want our IRQ back ! */ 906 enable_irq(priv->irq); 907 908 /* Let the libata core take it from there */ 909 ata_host_resume(priv->host); 910 911 return 0; 912 } 913 #endif /* CONFIG_PM_SLEEP */ 914 915 static const struct scsi_host_template pata_macio_sht = { 916 __ATA_BASE_SHT(DRV_NAME), 917 .sg_tablesize = MAX_DCMDS, 918 /* We may not need that strict one */ 919 .dma_boundary = ATA_DMA_BOUNDARY, 920 /* Not sure what the real max is but we know it's less than 64K, let's 921 * use 64K minus 256 922 */ 923 .max_segment_size = MAX_DBDMA_SEG, 924 .slave_configure = pata_macio_slave_config, 925 .sdev_groups = ata_common_sdev_groups, 926 .can_queue = ATA_DEF_QUEUE, 927 .tag_alloc_policy = BLK_TAG_ALLOC_RR, 928 }; 929 930 static struct ata_port_operations pata_macio_ops = { 931 .inherits = &ata_bmdma_port_ops, 932 933 .freeze = pata_macio_freeze, 934 .set_piomode = pata_macio_set_timings, 935 .set_dmamode = pata_macio_set_timings, 936 .cable_detect = pata_macio_cable_detect, 937 .sff_dev_select = pata_macio_dev_select, 938 .qc_prep = pata_macio_qc_prep, 939 .bmdma_setup = pata_macio_bmdma_setup, 940 .bmdma_start = pata_macio_bmdma_start, 941 .bmdma_stop = pata_macio_bmdma_stop, 942 .bmdma_status = pata_macio_bmdma_status, 943 .port_start = pata_macio_port_start, 944 .sff_irq_clear = pata_macio_irq_clear, 945 }; 946 947 static void pata_macio_invariants(struct pata_macio_priv *priv) 948 { 949 const int *bidp; 950 951 /* Identify the type of controller */ 952 if (of_device_is_compatible(priv->node, "shasta-ata")) { 953 priv->kind = controller_sh_ata6; 954 priv->timings = pata_macio_shasta_timings; 955 } else if (of_device_is_compatible(priv->node, "kauai-ata")) { 956 priv->kind = controller_un_ata6; 957 priv->timings = pata_macio_kauai_timings; 958 } else if (of_device_is_compatible(priv->node, "K2-UATA")) { 959 priv->kind = controller_k2_ata6; 960 priv->timings = pata_macio_kauai_timings; 961 } else if (of_device_is_compatible(priv->node, "keylargo-ata")) { 962 if (of_node_name_eq(priv->node, "ata-4")) { 963 priv->kind = controller_kl_ata4; 964 priv->timings = pata_macio_kl66_timings; 965 } else { 966 priv->kind = controller_kl_ata3; 967 priv->timings = pata_macio_kl33_timings; 968 } 969 } else if (of_device_is_compatible(priv->node, "heathrow-ata")) { 970 priv->kind = controller_heathrow; 971 priv->timings = pata_macio_heathrow_timings; 972 } else { 973 priv->kind = controller_ohare; 974 priv->timings = pata_macio_ohare_timings; 975 } 976 977 /* XXX FIXME --- setup priv->mediabay here */ 978 979 /* Get Apple bus ID (for clock and ASIC control) */ 980 bidp = of_get_property(priv->node, "AAPL,bus-id", NULL); 981 priv->aapl_bus_id = bidp ? *bidp : 0; 982 983 /* Fixup missing Apple bus ID in case of media-bay */ 984 if (priv->mediabay && !bidp) 985 priv->aapl_bus_id = 1; 986 } 987 988 static void pata_macio_setup_ios(struct ata_ioports *ioaddr, 989 void __iomem * base, void __iomem * dma) 990 { 991 /* cmd_addr is the base of regs for that port */ 992 ioaddr->cmd_addr = base; 993 994 /* taskfile registers */ 995 ioaddr->data_addr = base + (ATA_REG_DATA << 4); 996 ioaddr->error_addr = base + (ATA_REG_ERR << 4); 997 ioaddr->feature_addr = base + (ATA_REG_FEATURE << 4); 998 ioaddr->nsect_addr = base + (ATA_REG_NSECT << 4); 999 ioaddr->lbal_addr = base + (ATA_REG_LBAL << 4); 1000 ioaddr->lbam_addr = base + (ATA_REG_LBAM << 4); 1001 ioaddr->lbah_addr = base + (ATA_REG_LBAH << 4); 1002 ioaddr->device_addr = base + (ATA_REG_DEVICE << 4); 1003 ioaddr->status_addr = base + (ATA_REG_STATUS << 4); 1004 ioaddr->command_addr = base + (ATA_REG_CMD << 4); 1005 ioaddr->altstatus_addr = base + 0x160; 1006 ioaddr->ctl_addr = base + 0x160; 1007 ioaddr->bmdma_addr = dma; 1008 } 1009 1010 static void pmac_macio_calc_timing_masks(struct pata_macio_priv *priv, 1011 struct ata_port_info *pinfo) 1012 { 1013 int i = 0; 1014 1015 pinfo->pio_mask = 0; 1016 pinfo->mwdma_mask = 0; 1017 pinfo->udma_mask = 0; 1018 1019 while (priv->timings[i].mode > 0) { 1020 unsigned int mask = 1U << (priv->timings[i].mode & 0x0f); 1021 switch(priv->timings[i].mode & 0xf0) { 1022 case 0x00: /* PIO */ 1023 pinfo->pio_mask |= (mask >> 8); 1024 break; 1025 case 0x20: /* MWDMA */ 1026 pinfo->mwdma_mask |= mask; 1027 break; 1028 case 0x40: /* UDMA */ 1029 pinfo->udma_mask |= mask; 1030 break; 1031 } 1032 i++; 1033 } 1034 dev_dbg(priv->dev, "Supported masks: PIO=%x, MWDMA=%x, UDMA=%x\n", 1035 pinfo->pio_mask, pinfo->mwdma_mask, pinfo->udma_mask); 1036 } 1037 1038 static int pata_macio_common_init(struct pata_macio_priv *priv, 1039 resource_size_t tfregs, 1040 resource_size_t dmaregs, 1041 resource_size_t fcregs, 1042 unsigned long irq) 1043 { 1044 struct ata_port_info pinfo; 1045 const struct ata_port_info *ppi[] = { &pinfo, NULL }; 1046 void __iomem *dma_regs = NULL; 1047 1048 /* Fill up privates with various invariants collected from the 1049 * device-tree 1050 */ 1051 pata_macio_invariants(priv); 1052 1053 /* Make sure we have sane initial timings in the cache */ 1054 pata_macio_default_timings(priv); 1055 1056 /* Allocate libata host for 1 port */ 1057 memset(&pinfo, 0, sizeof(struct ata_port_info)); 1058 pmac_macio_calc_timing_masks(priv, &pinfo); 1059 pinfo.flags = ATA_FLAG_SLAVE_POSS; 1060 pinfo.port_ops = &pata_macio_ops; 1061 pinfo.private_data = priv; 1062 1063 priv->host = ata_host_alloc_pinfo(priv->dev, ppi, 1); 1064 if (priv->host == NULL) { 1065 dev_err(priv->dev, "Failed to allocate ATA port structure\n"); 1066 return -ENOMEM; 1067 } 1068 1069 /* Setup the private data in host too */ 1070 priv->host->private_data = priv; 1071 1072 /* Map base registers */ 1073 priv->tfregs = devm_ioremap(priv->dev, tfregs, 0x100); 1074 if (priv->tfregs == NULL) { 1075 dev_err(priv->dev, "Failed to map ATA ports\n"); 1076 return -ENOMEM; 1077 } 1078 priv->host->iomap = &priv->tfregs; 1079 1080 /* Map DMA regs */ 1081 if (dmaregs != 0) { 1082 dma_regs = devm_ioremap(priv->dev, dmaregs, 1083 sizeof(struct dbdma_regs)); 1084 if (dma_regs == NULL) 1085 dev_warn(priv->dev, "Failed to map ATA DMA registers\n"); 1086 } 1087 1088 /* If chip has local feature control, map those regs too */ 1089 if (fcregs != 0) { 1090 priv->kauai_fcr = devm_ioremap(priv->dev, fcregs, 4); 1091 if (priv->kauai_fcr == NULL) { 1092 dev_err(priv->dev, "Failed to map ATA FCR register\n"); 1093 return -ENOMEM; 1094 } 1095 } 1096 1097 /* Setup port data structure */ 1098 pata_macio_setup_ios(&priv->host->ports[0]->ioaddr, 1099 priv->tfregs, dma_regs); 1100 priv->host->ports[0]->private_data = priv; 1101 1102 /* hard-reset the controller */ 1103 pata_macio_reset_hw(priv, 0); 1104 pata_macio_apply_timings(priv->host->ports[0], 0); 1105 1106 /* Enable bus master if necessary */ 1107 if (priv->pdev && dma_regs) 1108 pci_set_master(priv->pdev); 1109 1110 dev_info(priv->dev, "Activating pata-macio chipset %s, Apple bus ID %d\n", 1111 macio_ata_names[priv->kind], priv->aapl_bus_id); 1112 1113 /* Start it up */ 1114 priv->irq = irq; 1115 return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0, 1116 &pata_macio_sht); 1117 } 1118 1119 static int pata_macio_attach(struct macio_dev *mdev, 1120 const struct of_device_id *match) 1121 { 1122 struct pata_macio_priv *priv; 1123 resource_size_t tfregs, dmaregs = 0; 1124 unsigned long irq; 1125 int rc; 1126 1127 /* Check for broken device-trees */ 1128 if (macio_resource_count(mdev) == 0) { 1129 dev_err(&mdev->ofdev.dev, 1130 "No addresses for controller\n"); 1131 return -ENXIO; 1132 } 1133 1134 /* Enable managed resources */ 1135 macio_enable_devres(mdev); 1136 1137 /* Allocate and init private data structure */ 1138 priv = devm_kzalloc(&mdev->ofdev.dev, 1139 sizeof(struct pata_macio_priv), GFP_KERNEL); 1140 if (!priv) 1141 return -ENOMEM; 1142 1143 priv->node = of_node_get(mdev->ofdev.dev.of_node); 1144 priv->mdev = mdev; 1145 priv->dev = &mdev->ofdev.dev; 1146 1147 /* Request memory resource for taskfile registers */ 1148 if (macio_request_resource(mdev, 0, "pata-macio")) { 1149 dev_err(&mdev->ofdev.dev, 1150 "Cannot obtain taskfile resource\n"); 1151 return -EBUSY; 1152 } 1153 tfregs = macio_resource_start(mdev, 0); 1154 1155 /* Request resources for DMA registers if any */ 1156 if (macio_resource_count(mdev) >= 2) { 1157 if (macio_request_resource(mdev, 1, "pata-macio-dma")) 1158 dev_err(&mdev->ofdev.dev, 1159 "Cannot obtain DMA resource\n"); 1160 else 1161 dmaregs = macio_resource_start(mdev, 1); 1162 } 1163 1164 /* 1165 * Fixup missing IRQ for some old implementations with broken 1166 * device-trees. 1167 * 1168 * This is a bit bogus, it should be fixed in the device-tree itself, 1169 * via the existing macio fixups, based on the type of interrupt 1170 * controller in the machine. However, I have no test HW for this case, 1171 * and this trick works well enough on those old machines... 1172 */ 1173 if (macio_irq_count(mdev) == 0) { 1174 dev_warn(&mdev->ofdev.dev, 1175 "No interrupts for controller, using 13\n"); 1176 irq = irq_create_mapping(NULL, 13); 1177 } else 1178 irq = macio_irq(mdev, 0); 1179 1180 /* Prevvent media bay callbacks until fully registered */ 1181 lock_media_bay(priv->mdev->media_bay); 1182 1183 /* Get register addresses and call common initialization */ 1184 rc = pata_macio_common_init(priv, 1185 tfregs, /* Taskfile regs */ 1186 dmaregs, /* DBDMA regs */ 1187 0, /* Feature control */ 1188 irq); 1189 unlock_media_bay(priv->mdev->media_bay); 1190 1191 return rc; 1192 } 1193 1194 static int pata_macio_detach(struct macio_dev *mdev) 1195 { 1196 struct ata_host *host = macio_get_drvdata(mdev); 1197 struct pata_macio_priv *priv = host->private_data; 1198 1199 lock_media_bay(priv->mdev->media_bay); 1200 1201 /* Make sure the mediabay callback doesn't try to access 1202 * dead stuff 1203 */ 1204 priv->host->private_data = NULL; 1205 1206 ata_host_detach(host); 1207 1208 unlock_media_bay(priv->mdev->media_bay); 1209 1210 return 0; 1211 } 1212 1213 #ifdef CONFIG_PM_SLEEP 1214 static int pata_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) 1215 { 1216 struct ata_host *host = macio_get_drvdata(mdev); 1217 1218 return pata_macio_do_suspend(host->private_data, mesg); 1219 } 1220 1221 static int pata_macio_resume(struct macio_dev *mdev) 1222 { 1223 struct ata_host *host = macio_get_drvdata(mdev); 1224 1225 return pata_macio_do_resume(host->private_data); 1226 } 1227 #endif /* CONFIG_PM_SLEEP */ 1228 1229 #ifdef CONFIG_PMAC_MEDIABAY 1230 static void pata_macio_mb_event(struct macio_dev* mdev, int mb_state) 1231 { 1232 struct ata_host *host = macio_get_drvdata(mdev); 1233 struct ata_port *ap; 1234 struct ata_eh_info *ehi; 1235 struct ata_device *dev; 1236 unsigned long flags; 1237 1238 if (!host || !host->private_data) 1239 return; 1240 ap = host->ports[0]; 1241 spin_lock_irqsave(ap->lock, flags); 1242 ehi = &ap->link.eh_info; 1243 if (mb_state == MB_CD) { 1244 ata_ehi_push_desc(ehi, "mediabay plug"); 1245 ata_ehi_hotplugged(ehi); 1246 ata_port_freeze(ap); 1247 } else { 1248 ata_ehi_push_desc(ehi, "mediabay unplug"); 1249 ata_for_each_dev(dev, &ap->link, ALL) 1250 dev->flags |= ATA_DFLAG_DETACH; 1251 ata_port_abort(ap); 1252 } 1253 spin_unlock_irqrestore(ap->lock, flags); 1254 1255 } 1256 #endif /* CONFIG_PMAC_MEDIABAY */ 1257 1258 1259 static int pata_macio_pci_attach(struct pci_dev *pdev, 1260 const struct pci_device_id *id) 1261 { 1262 struct pata_macio_priv *priv; 1263 struct device_node *np; 1264 resource_size_t rbase; 1265 1266 /* We cannot use a MacIO controller without its OF device node */ 1267 np = pci_device_to_OF_node(pdev); 1268 if (np == NULL) { 1269 dev_err(&pdev->dev, 1270 "Cannot find OF device node for controller\n"); 1271 return -ENODEV; 1272 } 1273 1274 /* Check that it can be enabled */ 1275 if (pcim_enable_device(pdev)) { 1276 dev_err(&pdev->dev, 1277 "Cannot enable controller PCI device\n"); 1278 return -ENXIO; 1279 } 1280 1281 /* Allocate and init private data structure */ 1282 priv = devm_kzalloc(&pdev->dev, 1283 sizeof(struct pata_macio_priv), GFP_KERNEL); 1284 if (!priv) 1285 return -ENOMEM; 1286 1287 priv->node = of_node_get(np); 1288 priv->pdev = pdev; 1289 priv->dev = &pdev->dev; 1290 1291 /* Get MMIO regions */ 1292 if (pci_request_regions(pdev, "pata-macio")) { 1293 dev_err(&pdev->dev, 1294 "Cannot obtain PCI resources\n"); 1295 return -EBUSY; 1296 } 1297 1298 /* Get register addresses and call common initialization */ 1299 rbase = pci_resource_start(pdev, 0); 1300 if (pata_macio_common_init(priv, 1301 rbase + 0x2000, /* Taskfile regs */ 1302 rbase + 0x1000, /* DBDMA regs */ 1303 rbase, /* Feature control */ 1304 pdev->irq)) 1305 return -ENXIO; 1306 1307 return 0; 1308 } 1309 1310 static void pata_macio_pci_detach(struct pci_dev *pdev) 1311 { 1312 struct ata_host *host = pci_get_drvdata(pdev); 1313 1314 ata_host_detach(host); 1315 } 1316 1317 #ifdef CONFIG_PM_SLEEP 1318 static int pata_macio_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) 1319 { 1320 struct ata_host *host = pci_get_drvdata(pdev); 1321 1322 return pata_macio_do_suspend(host->private_data, mesg); 1323 } 1324 1325 static int pata_macio_pci_resume(struct pci_dev *pdev) 1326 { 1327 struct ata_host *host = pci_get_drvdata(pdev); 1328 1329 return pata_macio_do_resume(host->private_data); 1330 } 1331 #endif /* CONFIG_PM_SLEEP */ 1332 1333 static const struct of_device_id pata_macio_match[] = 1334 { 1335 { .name = "IDE", }, 1336 { .name = "ATA", }, 1337 { .type = "ide", }, 1338 { .type = "ata", }, 1339 { /* sentinel */ } 1340 }; 1341 MODULE_DEVICE_TABLE(of, pata_macio_match); 1342 1343 static struct macio_driver pata_macio_driver = 1344 { 1345 .driver = { 1346 .name = "pata-macio", 1347 .owner = THIS_MODULE, 1348 .of_match_table = pata_macio_match, 1349 }, 1350 .probe = pata_macio_attach, 1351 .remove = pata_macio_detach, 1352 #ifdef CONFIG_PM_SLEEP 1353 .suspend = pata_macio_suspend, 1354 .resume = pata_macio_resume, 1355 #endif 1356 #ifdef CONFIG_PMAC_MEDIABAY 1357 .mediabay_event = pata_macio_mb_event, 1358 #endif 1359 }; 1360 1361 static const struct pci_device_id pata_macio_pci_match[] = { 1362 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 }, 1363 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 }, 1364 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 }, 1365 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 }, 1366 { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 }, 1367 {}, 1368 }; 1369 1370 static struct pci_driver pata_macio_pci_driver = { 1371 .name = "pata-pci-macio", 1372 .id_table = pata_macio_pci_match, 1373 .probe = pata_macio_pci_attach, 1374 .remove = pata_macio_pci_detach, 1375 #ifdef CONFIG_PM_SLEEP 1376 .suspend = pata_macio_pci_suspend, 1377 .resume = pata_macio_pci_resume, 1378 #endif 1379 .driver = { 1380 .owner = THIS_MODULE, 1381 }, 1382 }; 1383 MODULE_DEVICE_TABLE(pci, pata_macio_pci_match); 1384 1385 1386 static int __init pata_macio_init(void) 1387 { 1388 int rc; 1389 1390 if (!machine_is(powermac)) 1391 return -ENODEV; 1392 1393 rc = pci_register_driver(&pata_macio_pci_driver); 1394 if (rc) 1395 return rc; 1396 rc = macio_register_driver(&pata_macio_driver); 1397 if (rc) { 1398 pci_unregister_driver(&pata_macio_pci_driver); 1399 return rc; 1400 } 1401 return 0; 1402 } 1403 1404 static void __exit pata_macio_exit(void) 1405 { 1406 macio_unregister_driver(&pata_macio_driver); 1407 pci_unregister_driver(&pata_macio_pci_driver); 1408 } 1409 1410 module_init(pata_macio_init); 1411 module_exit(pata_macio_exit); 1412 1413 MODULE_AUTHOR("Benjamin Herrenschmidt"); 1414 MODULE_DESCRIPTION("Apple MacIO PATA driver"); 1415 MODULE_LICENSE("GPL"); 1416 MODULE_VERSION(DRV_VERSION); 1417