1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Faraday Technology FTIDE010 driver 4 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> 5 * 6 * Includes portions of the SL2312/SL3516/Gemini PATA driver 7 * Copyright (C) 2003 StorLine, Inc <jason@storlink.com.tw> 8 * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com> 9 * Copyright (C) 2010 Frederic Pecourt <opengemini@free.fr> 10 * Copyright (C) 2011 Tobias Waldvogel <tobias.waldvogel@gmail.com> 11 */ 12 13 #include <linux/platform_device.h> 14 #include <linux/module.h> 15 #include <linux/libata.h> 16 #include <linux/bitops.h> 17 #include <linux/of_address.h> 18 #include <linux/of_device.h> 19 #include <linux/clk.h> 20 #include "sata_gemini.h" 21 22 #define DRV_NAME "pata_ftide010" 23 24 /** 25 * struct ftide010 - state container for the Faraday FTIDE010 26 * @dev: pointer back to the device representing this controller 27 * @base: remapped I/O space address 28 * @pclk: peripheral clock for the IDE block 29 * @host: pointer to the ATA host for this device 30 * @master_cbl: master cable type 31 * @slave_cbl: slave cable type 32 * @sg: Gemini SATA bridge pointer, if running on the Gemini 33 * @master_to_sata0: Gemini SATA bridge: the ATA master is connected 34 * to the SATA0 bridge 35 * @slave_to_sata0: Gemini SATA bridge: the ATA slave is connected 36 * to the SATA0 bridge 37 * @master_to_sata1: Gemini SATA bridge: the ATA master is connected 38 * to the SATA1 bridge 39 * @slave_to_sata1: Gemini SATA bridge: the ATA slave is connected 40 * to the SATA1 bridge 41 */ 42 struct ftide010 { 43 struct device *dev; 44 void __iomem *base; 45 struct clk *pclk; 46 struct ata_host *host; 47 unsigned int master_cbl; 48 unsigned int slave_cbl; 49 /* Gemini-specific properties */ 50 struct sata_gemini *sg; 51 bool master_to_sata0; 52 bool slave_to_sata0; 53 bool master_to_sata1; 54 bool slave_to_sata1; 55 }; 56 57 #define FTIDE010_DMA_REG 0x00 58 #define FTIDE010_DMA_STATUS 0x02 59 #define FTIDE010_IDE_BMDTPR 0x04 60 #define FTIDE010_IDE_DEVICE_ID 0x08 61 #define FTIDE010_PIO_TIMING 0x10 62 #define FTIDE010_MWDMA_TIMING 0x11 63 #define FTIDE010_UDMA_TIMING0 0x12 /* Master */ 64 #define FTIDE010_UDMA_TIMING1 0x13 /* Slave */ 65 #define FTIDE010_CLK_MOD 0x14 66 /* These registers are mapped directly to the IDE registers */ 67 #define FTIDE010_CMD_DATA 0x20 68 #define FTIDE010_ERROR_FEATURES 0x21 69 #define FTIDE010_NSECT 0x22 70 #define FTIDE010_LBAL 0x23 71 #define FTIDE010_LBAM 0x24 72 #define FTIDE010_LBAH 0x25 73 #define FTIDE010_DEVICE 0x26 74 #define FTIDE010_STATUS_COMMAND 0x27 75 #define FTIDE010_ALTSTAT_CTRL 0x36 76 77 /* Set this bit for UDMA mode 5 and 6 */ 78 #define FTIDE010_UDMA_TIMING_MODE_56 BIT(7) 79 80 /* 0 = 50 MHz, 1 = 66 MHz */ 81 #define FTIDE010_CLK_MOD_DEV0_CLK_SEL BIT(0) 82 #define FTIDE010_CLK_MOD_DEV1_CLK_SEL BIT(1) 83 /* Enable UDMA on a device */ 84 #define FTIDE010_CLK_MOD_DEV0_UDMA_EN BIT(4) 85 #define FTIDE010_CLK_MOD_DEV1_UDMA_EN BIT(5) 86 87 static struct scsi_host_template pata_ftide010_sht = { 88 ATA_BMDMA_SHT(DRV_NAME), 89 }; 90 91 /* 92 * Bus timings 93 * 94 * The unit of the below required timings is two clock periods of the ATA 95 * reference clock which is 30 nanoseconds per unit at 66MHz and 20 96 * nanoseconds per unit at 50 MHz. The PIO timings assume 33MHz speed for 97 * PIO. 98 * 99 * pio_active_time: array of 5 elements for T2 timing for Mode 0, 100 * 1, 2, 3 and 4. Range 0..15. 101 * pio_recovery_time: array of 5 elements for T2l timing for Mode 0, 102 * 1, 2, 3 and 4. Range 0..15. 103 * mdma_50_active_time: array of 4 elements for Td timing for multi 104 * word DMA, Mode 0, 1, and 2 at 50 MHz. Range 0..15. 105 * mdma_50_recovery_time: array of 4 elements for Tk timing for 106 * multi word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15. 107 * mdma_66_active_time: array of 4 elements for Td timing for multi 108 * word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15. 109 * mdma_66_recovery_time: array of 4 elements for Tk timing for 110 * multi word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15. 111 * udma_50_setup_time: array of 4 elements for Tvds timing for ultra 112 * DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz. Range 0..7. 113 * udma_50_hold_time: array of 4 elements for Tdvh timing for 114 * multi word DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz, Range 0..7. 115 * udma_66_setup_time: array of 4 elements for Tvds timing for multi 116 * word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7. 117 * udma_66_hold_time: array of 4 elements for Tdvh timing for 118 * multi word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7. 119 */ 120 static const u8 pio_active_time[5] = {10, 10, 10, 3, 3}; 121 static const u8 pio_recovery_time[5] = {10, 3, 1, 3, 1}; 122 static const u8 mwdma_50_active_time[3] = {6, 2, 2}; 123 static const u8 mwdma_50_recovery_time[3] = {6, 2, 1}; 124 static const u8 mwdma_66_active_time[3] = {8, 3, 3}; 125 static const u8 mwdma_66_recovery_time[3] = {8, 2, 1}; 126 static const u8 udma_50_setup_time[6] = {3, 3, 2, 2, 1, 1}; 127 static const u8 udma_50_hold_time[6] = {3, 1, 1, 1, 1, 1}; 128 static const u8 udma_66_setup_time[7] = {4, 4, 3, 2, }; 129 static const u8 udma_66_hold_time[7] = {}; 130 131 /* 132 * We set 66 MHz for all MWDMA modes 133 */ 134 static const bool set_mdma_66_mhz[] = { true, true, true, true }; 135 136 /* 137 * We set 66 MHz for UDMA modes 3, 4 and 6 and no others 138 */ 139 static const bool set_udma_66_mhz[] = { false, false, false, true, true, false, true }; 140 141 static void ftide010_set_dmamode(struct ata_port *ap, struct ata_device *adev) 142 { 143 struct ftide010 *ftide = ap->host->private_data; 144 u8 speed = adev->dma_mode; 145 u8 devno = adev->devno & 1; 146 u8 udma_en_mask; 147 u8 f66m_en_mask; 148 u8 clkreg; 149 u8 timreg; 150 u8 i; 151 152 /* Target device 0 (master) or 1 (slave) */ 153 if (!devno) { 154 udma_en_mask = FTIDE010_CLK_MOD_DEV0_UDMA_EN; 155 f66m_en_mask = FTIDE010_CLK_MOD_DEV0_CLK_SEL; 156 } else { 157 udma_en_mask = FTIDE010_CLK_MOD_DEV1_UDMA_EN; 158 f66m_en_mask = FTIDE010_CLK_MOD_DEV1_CLK_SEL; 159 } 160 161 clkreg = readb(ftide->base + FTIDE010_CLK_MOD); 162 clkreg &= ~udma_en_mask; 163 clkreg &= ~f66m_en_mask; 164 165 if (speed & XFER_UDMA_0) { 166 i = speed & ~XFER_UDMA_0; 167 dev_dbg(ftide->dev, "set UDMA mode %02x, index %d\n", 168 speed, i); 169 170 clkreg |= udma_en_mask; 171 if (set_udma_66_mhz[i]) { 172 clkreg |= f66m_en_mask; 173 timreg = udma_66_setup_time[i] << 4 | 174 udma_66_hold_time[i]; 175 } else { 176 timreg = udma_50_setup_time[i] << 4 | 177 udma_50_hold_time[i]; 178 } 179 180 /* A special bit needs to be set for modes 5 and 6 */ 181 if (i >= 5) 182 timreg |= FTIDE010_UDMA_TIMING_MODE_56; 183 184 dev_dbg(ftide->dev, "UDMA write clkreg = %02x, timreg = %02x\n", 185 clkreg, timreg); 186 187 writeb(clkreg, ftide->base + FTIDE010_CLK_MOD); 188 writeb(timreg, ftide->base + FTIDE010_UDMA_TIMING0 + devno); 189 } else { 190 i = speed & ~XFER_MW_DMA_0; 191 dev_dbg(ftide->dev, "set MWDMA mode %02x, index %d\n", 192 speed, i); 193 194 if (set_mdma_66_mhz[i]) { 195 clkreg |= f66m_en_mask; 196 timreg = mwdma_66_active_time[i] << 4 | 197 mwdma_66_recovery_time[i]; 198 } else { 199 timreg = mwdma_50_active_time[i] << 4 | 200 mwdma_50_recovery_time[i]; 201 } 202 dev_dbg(ftide->dev, 203 "MWDMA write clkreg = %02x, timreg = %02x\n", 204 clkreg, timreg); 205 /* This will affect all devices */ 206 writeb(clkreg, ftide->base + FTIDE010_CLK_MOD); 207 writeb(timreg, ftide->base + FTIDE010_MWDMA_TIMING); 208 } 209 210 /* 211 * Store the current device (master or slave) in ap->private_data 212 * so that .qc_issue() can detect if this changes and reprogram 213 * the DMA settings. 214 */ 215 ap->private_data = adev; 216 217 return; 218 } 219 220 static void ftide010_set_piomode(struct ata_port *ap, struct ata_device *adev) 221 { 222 struct ftide010 *ftide = ap->host->private_data; 223 u8 pio = adev->pio_mode - XFER_PIO_0; 224 225 dev_dbg(ftide->dev, "set PIO mode %02x, index %d\n", 226 adev->pio_mode, pio); 227 writeb(pio_active_time[pio] << 4 | pio_recovery_time[pio], 228 ftide->base + FTIDE010_PIO_TIMING); 229 } 230 231 /* 232 * We implement our own qc_issue() callback since we may need to set up 233 * the timings differently for master and slave transfers: the CLK_MOD_REG 234 * and MWDMA_TIMING_REG is shared between master and slave, so reprogramming 235 * this may be necessary. 236 */ 237 static unsigned int ftide010_qc_issue(struct ata_queued_cmd *qc) 238 { 239 struct ata_port *ap = qc->ap; 240 struct ata_device *adev = qc->dev; 241 242 /* 243 * If the device changed, i.e. slave->master, master->slave, 244 * then set up the DMA mode again so we are sure the timings 245 * are correct. 246 */ 247 if (adev != ap->private_data && ata_dma_enabled(adev)) 248 ftide010_set_dmamode(ap, adev); 249 250 return ata_bmdma_qc_issue(qc); 251 } 252 253 static struct ata_port_operations pata_ftide010_port_ops = { 254 .inherits = &ata_bmdma_port_ops, 255 .set_dmamode = ftide010_set_dmamode, 256 .set_piomode = ftide010_set_piomode, 257 .qc_issue = ftide010_qc_issue, 258 }; 259 260 static struct ata_port_info ftide010_port_info = { 261 .flags = ATA_FLAG_SLAVE_POSS, 262 .mwdma_mask = ATA_MWDMA2, 263 .udma_mask = ATA_UDMA6, 264 .pio_mask = ATA_PIO4, 265 .port_ops = &pata_ftide010_port_ops, 266 }; 267 268 #if IS_ENABLED(CONFIG_SATA_GEMINI) 269 270 static int pata_ftide010_gemini_port_start(struct ata_port *ap) 271 { 272 struct ftide010 *ftide = ap->host->private_data; 273 struct device *dev = ftide->dev; 274 struct sata_gemini *sg = ftide->sg; 275 int bridges = 0; 276 int ret; 277 278 ret = ata_bmdma_port_start(ap); 279 if (ret) 280 return ret; 281 282 if (ftide->master_to_sata0) { 283 dev_info(dev, "SATA0 (master) start\n"); 284 ret = gemini_sata_start_bridge(sg, 0); 285 if (!ret) 286 bridges++; 287 } 288 if (ftide->master_to_sata1) { 289 dev_info(dev, "SATA1 (master) start\n"); 290 ret = gemini_sata_start_bridge(sg, 1); 291 if (!ret) 292 bridges++; 293 } 294 /* Avoid double-starting */ 295 if (ftide->slave_to_sata0 && !ftide->master_to_sata0) { 296 dev_info(dev, "SATA0 (slave) start\n"); 297 ret = gemini_sata_start_bridge(sg, 0); 298 if (!ret) 299 bridges++; 300 } 301 /* Avoid double-starting */ 302 if (ftide->slave_to_sata1 && !ftide->master_to_sata1) { 303 dev_info(dev, "SATA1 (slave) start\n"); 304 ret = gemini_sata_start_bridge(sg, 1); 305 if (!ret) 306 bridges++; 307 } 308 309 dev_info(dev, "brought %d bridges online\n", bridges); 310 return (bridges > 0) ? 0 : -EINVAL; // -ENODEV; 311 } 312 313 static void pata_ftide010_gemini_port_stop(struct ata_port *ap) 314 { 315 struct ftide010 *ftide = ap->host->private_data; 316 struct device *dev = ftide->dev; 317 struct sata_gemini *sg = ftide->sg; 318 319 if (ftide->master_to_sata0) { 320 dev_info(dev, "SATA0 (master) stop\n"); 321 gemini_sata_stop_bridge(sg, 0); 322 } 323 if (ftide->master_to_sata1) { 324 dev_info(dev, "SATA1 (master) stop\n"); 325 gemini_sata_stop_bridge(sg, 1); 326 } 327 /* Avoid double-stopping */ 328 if (ftide->slave_to_sata0 && !ftide->master_to_sata0) { 329 dev_info(dev, "SATA0 (slave) stop\n"); 330 gemini_sata_stop_bridge(sg, 0); 331 } 332 /* Avoid double-stopping */ 333 if (ftide->slave_to_sata1 && !ftide->master_to_sata1) { 334 dev_info(dev, "SATA1 (slave) stop\n"); 335 gemini_sata_stop_bridge(sg, 1); 336 } 337 } 338 339 static int pata_ftide010_gemini_cable_detect(struct ata_port *ap) 340 { 341 struct ftide010 *ftide = ap->host->private_data; 342 343 /* 344 * Return the master cable, I have no clue how to return a different 345 * cable for the slave than for the master. 346 */ 347 return ftide->master_cbl; 348 } 349 350 static int pata_ftide010_gemini_init(struct ftide010 *ftide, 351 struct ata_port_info *pi, 352 bool is_ata1) 353 { 354 struct device *dev = ftide->dev; 355 struct sata_gemini *sg; 356 enum gemini_muxmode muxmode; 357 358 /* Look up SATA bridge */ 359 sg = gemini_sata_bridge_get(); 360 if (IS_ERR(sg)) 361 return PTR_ERR(sg); 362 ftide->sg = sg; 363 364 muxmode = gemini_sata_get_muxmode(sg); 365 366 /* Special ops */ 367 pata_ftide010_port_ops.port_start = 368 pata_ftide010_gemini_port_start; 369 pata_ftide010_port_ops.port_stop = 370 pata_ftide010_gemini_port_stop; 371 pata_ftide010_port_ops.cable_detect = 372 pata_ftide010_gemini_cable_detect; 373 374 /* Flag port as SATA-capable */ 375 if (gemini_sata_bridge_enabled(sg, is_ata1)) 376 pi->flags |= ATA_FLAG_SATA; 377 378 /* This device has broken DMA, only PIO works */ 379 if (of_machine_is_compatible("itian,sq201")) { 380 pi->mwdma_mask = 0; 381 pi->udma_mask = 0; 382 } 383 384 /* 385 * We assume that a simple 40-wire cable is used in the PATA mode. 386 * if you're adding a system using the PATA interface, make sure 387 * the right cable is set up here, it might be necessary to use 388 * special hardware detection or encode the cable type in the device 389 * tree with special properties. 390 */ 391 if (!is_ata1) { 392 switch (muxmode) { 393 case GEMINI_MUXMODE_0: 394 ftide->master_cbl = ATA_CBL_SATA; 395 ftide->slave_cbl = ATA_CBL_PATA40; 396 ftide->master_to_sata0 = true; 397 break; 398 case GEMINI_MUXMODE_1: 399 ftide->master_cbl = ATA_CBL_SATA; 400 ftide->slave_cbl = ATA_CBL_NONE; 401 ftide->master_to_sata0 = true; 402 break; 403 case GEMINI_MUXMODE_2: 404 ftide->master_cbl = ATA_CBL_PATA40; 405 ftide->slave_cbl = ATA_CBL_PATA40; 406 break; 407 case GEMINI_MUXMODE_3: 408 ftide->master_cbl = ATA_CBL_SATA; 409 ftide->slave_cbl = ATA_CBL_SATA; 410 ftide->master_to_sata0 = true; 411 ftide->slave_to_sata1 = true; 412 break; 413 } 414 } else { 415 switch (muxmode) { 416 case GEMINI_MUXMODE_0: 417 ftide->master_cbl = ATA_CBL_SATA; 418 ftide->slave_cbl = ATA_CBL_NONE; 419 ftide->master_to_sata1 = true; 420 break; 421 case GEMINI_MUXMODE_1: 422 ftide->master_cbl = ATA_CBL_SATA; 423 ftide->slave_cbl = ATA_CBL_PATA40; 424 ftide->master_to_sata1 = true; 425 break; 426 case GEMINI_MUXMODE_2: 427 ftide->master_cbl = ATA_CBL_SATA; 428 ftide->slave_cbl = ATA_CBL_SATA; 429 ftide->slave_to_sata0 = true; 430 ftide->master_to_sata1 = true; 431 break; 432 case GEMINI_MUXMODE_3: 433 ftide->master_cbl = ATA_CBL_PATA40; 434 ftide->slave_cbl = ATA_CBL_PATA40; 435 break; 436 } 437 } 438 dev_info(dev, "set up Gemini PATA%d\n", is_ata1); 439 440 return 0; 441 } 442 #else 443 static int pata_ftide010_gemini_init(struct ftide010 *ftide, 444 struct ata_port_info *pi, 445 bool is_ata1) 446 { 447 return -ENOTSUPP; 448 } 449 #endif 450 451 452 static int pata_ftide010_probe(struct platform_device *pdev) 453 { 454 struct device *dev = &pdev->dev; 455 struct device_node *np = dev->of_node; 456 struct ata_port_info pi = ftide010_port_info; 457 const struct ata_port_info *ppi[] = { &pi, NULL }; 458 struct ftide010 *ftide; 459 struct resource *res; 460 int irq; 461 int ret; 462 int i; 463 464 ftide = devm_kzalloc(dev, sizeof(*ftide), GFP_KERNEL); 465 if (!ftide) 466 return -ENOMEM; 467 ftide->dev = dev; 468 469 irq = platform_get_irq(pdev, 0); 470 if (irq < 0) 471 return irq; 472 473 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 474 if (!res) 475 return -ENODEV; 476 477 ftide->base = devm_ioremap_resource(dev, res); 478 if (IS_ERR(ftide->base)) 479 return PTR_ERR(ftide->base); 480 481 ftide->pclk = devm_clk_get(dev, "PCLK"); 482 if (!IS_ERR(ftide->pclk)) { 483 ret = clk_prepare_enable(ftide->pclk); 484 if (ret) { 485 dev_err(dev, "failed to enable PCLK\n"); 486 return ret; 487 } 488 } 489 490 /* Some special Cortina Gemini init, if needed */ 491 if (of_device_is_compatible(np, "cortina,gemini-pata")) { 492 /* 493 * We need to know which instance is probing (the 494 * Gemini has two instances of FTIDE010) and we do 495 * this simply by looking at the physical base 496 * address, which is 0x63400000 for ATA1, else we 497 * are ATA0. This will also set up the cable types. 498 */ 499 ret = pata_ftide010_gemini_init(ftide, 500 &pi, 501 (res->start == 0x63400000)); 502 if (ret) 503 goto err_dis_clk; 504 } else { 505 /* Else assume we are connected using PATA40 */ 506 ftide->master_cbl = ATA_CBL_PATA40; 507 ftide->slave_cbl = ATA_CBL_PATA40; 508 } 509 510 ftide->host = ata_host_alloc_pinfo(dev, ppi, 1); 511 if (!ftide->host) { 512 ret = -ENOMEM; 513 goto err_dis_clk; 514 } 515 ftide->host->private_data = ftide; 516 517 for (i = 0; i < ftide->host->n_ports; i++) { 518 struct ata_port *ap = ftide->host->ports[i]; 519 struct ata_ioports *ioaddr = &ap->ioaddr; 520 521 ioaddr->bmdma_addr = ftide->base + FTIDE010_DMA_REG; 522 ioaddr->cmd_addr = ftide->base + FTIDE010_CMD_DATA; 523 ioaddr->ctl_addr = ftide->base + FTIDE010_ALTSTAT_CTRL; 524 ioaddr->altstatus_addr = ftide->base + FTIDE010_ALTSTAT_CTRL; 525 ata_sff_std_ports(ioaddr); 526 } 527 528 dev_info(dev, "device ID %08x, irq %d, reg %pR\n", 529 readl(ftide->base + FTIDE010_IDE_DEVICE_ID), irq, res); 530 531 ret = ata_host_activate(ftide->host, irq, ata_bmdma_interrupt, 532 0, &pata_ftide010_sht); 533 if (ret) 534 goto err_dis_clk; 535 536 return 0; 537 538 err_dis_clk: 539 if (!IS_ERR(ftide->pclk)) 540 clk_disable_unprepare(ftide->pclk); 541 return ret; 542 } 543 544 static int pata_ftide010_remove(struct platform_device *pdev) 545 { 546 struct ata_host *host = platform_get_drvdata(pdev); 547 struct ftide010 *ftide = host->private_data; 548 549 ata_host_detach(ftide->host); 550 if (!IS_ERR(ftide->pclk)) 551 clk_disable_unprepare(ftide->pclk); 552 553 return 0; 554 } 555 556 static const struct of_device_id pata_ftide010_of_match[] = { 557 { .compatible = "faraday,ftide010", }, 558 { /* sentinel */ } 559 }; 560 561 static struct platform_driver pata_ftide010_driver = { 562 .driver = { 563 .name = DRV_NAME, 564 .of_match_table = of_match_ptr(pata_ftide010_of_match), 565 }, 566 .probe = pata_ftide010_probe, 567 .remove = pata_ftide010_remove, 568 }; 569 module_platform_driver(pata_ftide010_driver); 570 571 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); 572 MODULE_LICENSE("GPL"); 573 MODULE_ALIAS("platform:" DRV_NAME); 574