1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * EP93XX PATA controller driver. 4 * 5 * Copyright (c) 2012, Metasoft s.c. 6 * Rafal Prylowski <prylowski@metasoft.pl> 7 * 8 * Based on pata_scc.c, pata_icside.c and on earlier version of EP93XX 9 * PATA driver by Lennert Buytenhek and Alessandro Zummo. 10 * Read/Write timings, resource management and other improvements 11 * from driver by Joao Ramos and Bartlomiej Zolnierkiewicz. 12 * DMA engine support based on spi-ep93xx.c by Mika Westerberg. 13 * 14 * Original copyrights: 15 * 16 * Support for Cirrus Logic's EP93xx (EP9312, EP9315) CPUs 17 * PATA host controller driver. 18 * 19 * Copyright (c) 2009, Bartlomiej Zolnierkiewicz 20 * 21 * Heavily based on the ep93xx-ide.c driver: 22 * 23 * Copyright (c) 2009, Joao Ramos <joao.ramos@inov.pt> 24 * INESC Inovacao (INOV) 25 * 26 * EP93XX PATA controller driver. 27 * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> 28 * 29 * An ATA driver for the Cirrus Logic EP93xx PATA controller. 30 * 31 * Based on an earlier version by Alessandro Zummo, which is: 32 * Copyright (C) 2006 Tower Technologies 33 */ 34 35 #include <linux/err.h> 36 #include <linux/kernel.h> 37 #include <linux/module.h> 38 #include <linux/blkdev.h> 39 #include <scsi/scsi_host.h> 40 #include <linux/ata.h> 41 #include <linux/libata.h> 42 #include <linux/platform_device.h> 43 #include <linux/delay.h> 44 #include <linux/dmaengine.h> 45 #include <linux/ktime.h> 46 47 #include <linux/platform_data/dma-ep93xx.h> 48 #include <linux/soc/cirrus/ep93xx.h> 49 50 #define DRV_NAME "ep93xx-ide" 51 #define DRV_VERSION "1.0" 52 53 enum { 54 /* IDE Control Register */ 55 IDECTRL = 0x00, 56 IDECTRL_CS0N = (1 << 0), 57 IDECTRL_CS1N = (1 << 1), 58 IDECTRL_DIORN = (1 << 5), 59 IDECTRL_DIOWN = (1 << 6), 60 IDECTRL_INTRQ = (1 << 9), 61 IDECTRL_IORDY = (1 << 10), 62 /* 63 * the device IDE register to be accessed is selected through 64 * IDECTRL register's specific bitfields 'DA', 'CS1N' and 'CS0N': 65 * b4 b3 b2 b1 b0 66 * A2 A1 A0 CS1N CS0N 67 * the values filled in this structure allows the value to be directly 68 * ORed to the IDECTRL register, hence giving directly the A[2:0] and 69 * CS1N/CS0N values for each IDE register. 70 * The values correspond to the transformation: 71 * ((real IDE address) << 2) | CS1N value << 1 | CS0N value 72 */ 73 IDECTRL_ADDR_CMD = 0 + 2, /* CS1 */ 74 IDECTRL_ADDR_DATA = (ATA_REG_DATA << 2) + 2, 75 IDECTRL_ADDR_ERROR = (ATA_REG_ERR << 2) + 2, 76 IDECTRL_ADDR_FEATURE = (ATA_REG_FEATURE << 2) + 2, 77 IDECTRL_ADDR_NSECT = (ATA_REG_NSECT << 2) + 2, 78 IDECTRL_ADDR_LBAL = (ATA_REG_LBAL << 2) + 2, 79 IDECTRL_ADDR_LBAM = (ATA_REG_LBAM << 2) + 2, 80 IDECTRL_ADDR_LBAH = (ATA_REG_LBAH << 2) + 2, 81 IDECTRL_ADDR_DEVICE = (ATA_REG_DEVICE << 2) + 2, 82 IDECTRL_ADDR_STATUS = (ATA_REG_STATUS << 2) + 2, 83 IDECTRL_ADDR_COMMAND = (ATA_REG_CMD << 2) + 2, 84 IDECTRL_ADDR_ALTSTATUS = (0x06 << 2) + 1, /* CS0 */ 85 IDECTRL_ADDR_CTL = (0x06 << 2) + 1, /* CS0 */ 86 87 /* IDE Configuration Register */ 88 IDECFG = 0x04, 89 IDECFG_IDEEN = (1 << 0), 90 IDECFG_PIO = (1 << 1), 91 IDECFG_MDMA = (1 << 2), 92 IDECFG_UDMA = (1 << 3), 93 IDECFG_MODE_SHIFT = 4, 94 IDECFG_MODE_MASK = (0xf << 4), 95 IDECFG_WST_SHIFT = 8, 96 IDECFG_WST_MASK = (0x3 << 8), 97 98 /* MDMA Operation Register */ 99 IDEMDMAOP = 0x08, 100 101 /* UDMA Operation Register */ 102 IDEUDMAOP = 0x0c, 103 IDEUDMAOP_UEN = (1 << 0), 104 IDEUDMAOP_RWOP = (1 << 1), 105 106 /* PIO/MDMA/UDMA Data Registers */ 107 IDEDATAOUT = 0x10, 108 IDEDATAIN = 0x14, 109 IDEMDMADATAOUT = 0x18, 110 IDEMDMADATAIN = 0x1c, 111 IDEUDMADATAOUT = 0x20, 112 IDEUDMADATAIN = 0x24, 113 114 /* UDMA Status Register */ 115 IDEUDMASTS = 0x28, 116 IDEUDMASTS_DMAIDE = (1 << 16), 117 IDEUDMASTS_INTIDE = (1 << 17), 118 IDEUDMASTS_SBUSY = (1 << 18), 119 IDEUDMASTS_NDO = (1 << 24), 120 IDEUDMASTS_NDI = (1 << 25), 121 IDEUDMASTS_N4X = (1 << 26), 122 123 /* UDMA Debug Status Register */ 124 IDEUDMADEBUG = 0x2c, 125 }; 126 127 struct ep93xx_pata_data { 128 const struct platform_device *pdev; 129 void __iomem *ide_base; 130 struct ata_timing t; 131 bool iordy; 132 133 unsigned long udma_in_phys; 134 unsigned long udma_out_phys; 135 136 struct dma_chan *dma_rx_channel; 137 struct ep93xx_dma_data dma_rx_data; 138 struct dma_chan *dma_tx_channel; 139 struct ep93xx_dma_data dma_tx_data; 140 }; 141 142 static void ep93xx_pata_clear_regs(void __iomem *base) 143 { 144 writel(IDECTRL_CS0N | IDECTRL_CS1N | IDECTRL_DIORN | 145 IDECTRL_DIOWN, base + IDECTRL); 146 147 writel(0, base + IDECFG); 148 writel(0, base + IDEMDMAOP); 149 writel(0, base + IDEUDMAOP); 150 writel(0, base + IDEDATAOUT); 151 writel(0, base + IDEDATAIN); 152 writel(0, base + IDEMDMADATAOUT); 153 writel(0, base + IDEMDMADATAIN); 154 writel(0, base + IDEUDMADATAOUT); 155 writel(0, base + IDEUDMADATAIN); 156 writel(0, base + IDEUDMADEBUG); 157 } 158 159 static bool ep93xx_pata_check_iordy(void __iomem *base) 160 { 161 return !!(readl(base + IDECTRL) & IDECTRL_IORDY); 162 } 163 164 /* 165 * According to EP93xx User's Guide, WST field of IDECFG specifies number 166 * of HCLK cycles to hold the data bus after a PIO write operation. 167 * It should be programmed to guarantee following delays: 168 * 169 * PIO Mode [ns] 170 * 0 30 171 * 1 20 172 * 2 15 173 * 3 10 174 * 4 5 175 * 176 * Maximum possible value for HCLK is 100MHz. 177 */ 178 static int ep93xx_pata_get_wst(int pio_mode) 179 { 180 int val; 181 182 if (pio_mode == 0) 183 val = 3; 184 else if (pio_mode < 3) 185 val = 2; 186 else 187 val = 1; 188 189 return val << IDECFG_WST_SHIFT; 190 } 191 192 static void ep93xx_pata_enable_pio(void __iomem *base, int pio_mode) 193 { 194 writel(IDECFG_IDEEN | IDECFG_PIO | 195 ep93xx_pata_get_wst(pio_mode) | 196 (pio_mode << IDECFG_MODE_SHIFT), base + IDECFG); 197 } 198 199 /* 200 * Based on delay loop found in mach-pxa/mp900.c. 201 * 202 * Single iteration should take 5 cpu cycles. This is 25ns assuming the 203 * fastest ep93xx cpu speed (200MHz) and is better optimized for PIO4 timings 204 * than eg. 20ns. 205 */ 206 static void ep93xx_pata_delay(unsigned long count) 207 { 208 __asm__ volatile ( 209 "0:\n" 210 "mov r0, r0\n" 211 "subs %0, %1, #1\n" 212 "bge 0b\n" 213 : "=r" (count) 214 : "0" (count) 215 ); 216 } 217 218 static unsigned long ep93xx_pata_wait_for_iordy(void __iomem *base, 219 unsigned long t2) 220 { 221 /* 222 * According to ATA specification, IORDY pin can be first sampled 223 * tA = 35ns after activation of DIOR-/DIOW-. Maximum IORDY pulse 224 * width is tB = 1250ns. 225 * 226 * We are already t2 delay loop iterations after activation of 227 * DIOR-/DIOW-, so we set timeout to (1250 + 35) / 25 - t2 additional 228 * delay loop iterations. 229 */ 230 unsigned long start = (1250 + 35) / 25 - t2; 231 unsigned long counter = start; 232 233 while (!ep93xx_pata_check_iordy(base) && counter--) 234 ep93xx_pata_delay(1); 235 return start - counter; 236 } 237 238 /* common part at start of ep93xx_pata_read/write() */ 239 static void ep93xx_pata_rw_begin(void __iomem *base, unsigned long addr, 240 unsigned long t1) 241 { 242 writel(IDECTRL_DIOWN | IDECTRL_DIORN | addr, base + IDECTRL); 243 ep93xx_pata_delay(t1); 244 } 245 246 /* common part at end of ep93xx_pata_read/write() */ 247 static void ep93xx_pata_rw_end(void __iomem *base, unsigned long addr, 248 bool iordy, unsigned long t0, unsigned long t2, 249 unsigned long t2i) 250 { 251 ep93xx_pata_delay(t2); 252 /* lengthen t2 if needed */ 253 if (iordy) 254 t2 += ep93xx_pata_wait_for_iordy(base, t2); 255 writel(IDECTRL_DIOWN | IDECTRL_DIORN | addr, base + IDECTRL); 256 if (t0 > t2 && t0 - t2 > t2i) 257 ep93xx_pata_delay(t0 - t2); 258 else 259 ep93xx_pata_delay(t2i); 260 } 261 262 static u16 ep93xx_pata_read(struct ep93xx_pata_data *drv_data, 263 unsigned long addr, 264 bool reg) 265 { 266 void __iomem *base = drv_data->ide_base; 267 const struct ata_timing *t = &drv_data->t; 268 unsigned long t0 = reg ? t->cyc8b : t->cycle; 269 unsigned long t2 = reg ? t->act8b : t->active; 270 unsigned long t2i = reg ? t->rec8b : t->recover; 271 272 ep93xx_pata_rw_begin(base, addr, t->setup); 273 writel(IDECTRL_DIOWN | addr, base + IDECTRL); 274 /* 275 * The IDEDATAIN register is loaded from the DD pins at the positive 276 * edge of the DIORN signal. (EP93xx UG p27-14) 277 */ 278 ep93xx_pata_rw_end(base, addr, drv_data->iordy, t0, t2, t2i); 279 return readl(base + IDEDATAIN); 280 } 281 282 /* IDE register read */ 283 static u16 ep93xx_pata_read_reg(struct ep93xx_pata_data *drv_data, 284 unsigned long addr) 285 { 286 return ep93xx_pata_read(drv_data, addr, true); 287 } 288 289 /* PIO data read */ 290 static u16 ep93xx_pata_read_data(struct ep93xx_pata_data *drv_data, 291 unsigned long addr) 292 { 293 return ep93xx_pata_read(drv_data, addr, false); 294 } 295 296 static void ep93xx_pata_write(struct ep93xx_pata_data *drv_data, 297 u16 value, unsigned long addr, 298 bool reg) 299 { 300 void __iomem *base = drv_data->ide_base; 301 const struct ata_timing *t = &drv_data->t; 302 unsigned long t0 = reg ? t->cyc8b : t->cycle; 303 unsigned long t2 = reg ? t->act8b : t->active; 304 unsigned long t2i = reg ? t->rec8b : t->recover; 305 306 ep93xx_pata_rw_begin(base, addr, t->setup); 307 /* 308 * Value from IDEDATAOUT register is driven onto the DD pins when 309 * DIOWN is low. (EP93xx UG p27-13) 310 */ 311 writel(value, base + IDEDATAOUT); 312 writel(IDECTRL_DIORN | addr, base + IDECTRL); 313 ep93xx_pata_rw_end(base, addr, drv_data->iordy, t0, t2, t2i); 314 } 315 316 /* IDE register write */ 317 static void ep93xx_pata_write_reg(struct ep93xx_pata_data *drv_data, 318 u16 value, unsigned long addr) 319 { 320 ep93xx_pata_write(drv_data, value, addr, true); 321 } 322 323 /* PIO data write */ 324 static void ep93xx_pata_write_data(struct ep93xx_pata_data *drv_data, 325 u16 value, unsigned long addr) 326 { 327 ep93xx_pata_write(drv_data, value, addr, false); 328 } 329 330 static void ep93xx_pata_set_piomode(struct ata_port *ap, 331 struct ata_device *adev) 332 { 333 struct ep93xx_pata_data *drv_data = ap->host->private_data; 334 struct ata_device *pair = ata_dev_pair(adev); 335 /* 336 * Calculate timings for the delay loop, assuming ep93xx cpu speed 337 * is 200MHz (maximum possible for ep93xx). If actual cpu speed is 338 * slower, we will wait a bit longer in each delay. 339 * Additional division of cpu speed by 5, because single iteration 340 * of our delay loop takes 5 cpu cycles (25ns). 341 */ 342 unsigned long T = 1000000 / (200 / 5); 343 344 ata_timing_compute(adev, adev->pio_mode, &drv_data->t, T, 0); 345 if (pair && pair->pio_mode) { 346 struct ata_timing t; 347 ata_timing_compute(pair, pair->pio_mode, &t, T, 0); 348 ata_timing_merge(&t, &drv_data->t, &drv_data->t, 349 ATA_TIMING_SETUP | ATA_TIMING_8BIT); 350 } 351 drv_data->iordy = ata_pio_need_iordy(adev); 352 353 ep93xx_pata_enable_pio(drv_data->ide_base, 354 adev->pio_mode - XFER_PIO_0); 355 } 356 357 /* Note: original code is ata_sff_check_status */ 358 static u8 ep93xx_pata_check_status(struct ata_port *ap) 359 { 360 struct ep93xx_pata_data *drv_data = ap->host->private_data; 361 362 return ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_STATUS); 363 } 364 365 static u8 ep93xx_pata_check_altstatus(struct ata_port *ap) 366 { 367 struct ep93xx_pata_data *drv_data = ap->host->private_data; 368 369 return ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_ALTSTATUS); 370 } 371 372 /* Note: original code is ata_sff_tf_load */ 373 static void ep93xx_pata_tf_load(struct ata_port *ap, 374 const struct ata_taskfile *tf) 375 { 376 struct ep93xx_pata_data *drv_data = ap->host->private_data; 377 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; 378 379 if (tf->ctl != ap->last_ctl) { 380 ep93xx_pata_write_reg(drv_data, tf->ctl, IDECTRL_ADDR_CTL); 381 ap->last_ctl = tf->ctl; 382 ata_wait_idle(ap); 383 } 384 385 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { 386 ep93xx_pata_write_reg(drv_data, tf->hob_feature, 387 IDECTRL_ADDR_FEATURE); 388 ep93xx_pata_write_reg(drv_data, tf->hob_nsect, 389 IDECTRL_ADDR_NSECT); 390 ep93xx_pata_write_reg(drv_data, tf->hob_lbal, 391 IDECTRL_ADDR_LBAL); 392 ep93xx_pata_write_reg(drv_data, tf->hob_lbam, 393 IDECTRL_ADDR_LBAM); 394 ep93xx_pata_write_reg(drv_data, tf->hob_lbah, 395 IDECTRL_ADDR_LBAH); 396 } 397 398 if (is_addr) { 399 ep93xx_pata_write_reg(drv_data, tf->feature, 400 IDECTRL_ADDR_FEATURE); 401 ep93xx_pata_write_reg(drv_data, tf->nsect, IDECTRL_ADDR_NSECT); 402 ep93xx_pata_write_reg(drv_data, tf->lbal, IDECTRL_ADDR_LBAL); 403 ep93xx_pata_write_reg(drv_data, tf->lbam, IDECTRL_ADDR_LBAM); 404 ep93xx_pata_write_reg(drv_data, tf->lbah, IDECTRL_ADDR_LBAH); 405 } 406 407 if (tf->flags & ATA_TFLAG_DEVICE) 408 ep93xx_pata_write_reg(drv_data, tf->device, 409 IDECTRL_ADDR_DEVICE); 410 411 ata_wait_idle(ap); 412 } 413 414 /* Note: original code is ata_sff_tf_read */ 415 static void ep93xx_pata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) 416 { 417 struct ep93xx_pata_data *drv_data = ap->host->private_data; 418 419 tf->status = ep93xx_pata_check_status(ap); 420 tf->error = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_FEATURE); 421 tf->nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT); 422 tf->lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL); 423 tf->lbam = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAM); 424 tf->lbah = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAH); 425 tf->device = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_DEVICE); 426 427 if (tf->flags & ATA_TFLAG_LBA48) { 428 ep93xx_pata_write_reg(drv_data, tf->ctl | ATA_HOB, 429 IDECTRL_ADDR_CTL); 430 tf->hob_feature = ep93xx_pata_read_reg(drv_data, 431 IDECTRL_ADDR_FEATURE); 432 tf->hob_nsect = ep93xx_pata_read_reg(drv_data, 433 IDECTRL_ADDR_NSECT); 434 tf->hob_lbal = ep93xx_pata_read_reg(drv_data, 435 IDECTRL_ADDR_LBAL); 436 tf->hob_lbam = ep93xx_pata_read_reg(drv_data, 437 IDECTRL_ADDR_LBAM); 438 tf->hob_lbah = ep93xx_pata_read_reg(drv_data, 439 IDECTRL_ADDR_LBAH); 440 ep93xx_pata_write_reg(drv_data, tf->ctl, IDECTRL_ADDR_CTL); 441 ap->last_ctl = tf->ctl; 442 } 443 } 444 445 /* Note: original code is ata_sff_exec_command */ 446 static void ep93xx_pata_exec_command(struct ata_port *ap, 447 const struct ata_taskfile *tf) 448 { 449 struct ep93xx_pata_data *drv_data = ap->host->private_data; 450 451 ep93xx_pata_write_reg(drv_data, tf->command, 452 IDECTRL_ADDR_COMMAND); 453 ata_sff_pause(ap); 454 } 455 456 /* Note: original code is ata_sff_dev_select */ 457 static void ep93xx_pata_dev_select(struct ata_port *ap, unsigned int device) 458 { 459 struct ep93xx_pata_data *drv_data = ap->host->private_data; 460 u8 tmp = ATA_DEVICE_OBS; 461 462 if (device != 0) 463 tmp |= ATA_DEV1; 464 465 ep93xx_pata_write_reg(drv_data, tmp, IDECTRL_ADDR_DEVICE); 466 ata_sff_pause(ap); /* needed; also flushes, for mmio */ 467 } 468 469 /* Note: original code is ata_sff_set_devctl */ 470 static void ep93xx_pata_set_devctl(struct ata_port *ap, u8 ctl) 471 { 472 struct ep93xx_pata_data *drv_data = ap->host->private_data; 473 474 ep93xx_pata_write_reg(drv_data, ctl, IDECTRL_ADDR_CTL); 475 } 476 477 /* Note: original code is ata_sff_data_xfer */ 478 static unsigned int ep93xx_pata_data_xfer(struct ata_queued_cmd *qc, 479 unsigned char *buf, 480 unsigned int buflen, int rw) 481 { 482 struct ata_port *ap = qc->dev->link->ap; 483 struct ep93xx_pata_data *drv_data = ap->host->private_data; 484 u16 *data = (u16 *)buf; 485 unsigned int words = buflen >> 1; 486 487 /* Transfer multiple of 2 bytes */ 488 while (words--) 489 if (rw == READ) 490 *data++ = cpu_to_le16( 491 ep93xx_pata_read_data( 492 drv_data, IDECTRL_ADDR_DATA)); 493 else 494 ep93xx_pata_write_data(drv_data, le16_to_cpu(*data++), 495 IDECTRL_ADDR_DATA); 496 497 /* Transfer trailing 1 byte, if any. */ 498 if (unlikely(buflen & 0x01)) { 499 unsigned char pad[2] = { }; 500 501 buf += buflen - 1; 502 503 if (rw == READ) { 504 *pad = cpu_to_le16( 505 ep93xx_pata_read_data( 506 drv_data, IDECTRL_ADDR_DATA)); 507 *buf = pad[0]; 508 } else { 509 pad[0] = *buf; 510 ep93xx_pata_write_data(drv_data, le16_to_cpu(*pad), 511 IDECTRL_ADDR_DATA); 512 } 513 words++; 514 } 515 516 return words << 1; 517 } 518 519 /* Note: original code is ata_devchk */ 520 static bool ep93xx_pata_device_is_present(struct ata_port *ap, 521 unsigned int device) 522 { 523 struct ep93xx_pata_data *drv_data = ap->host->private_data; 524 u8 nsect, lbal; 525 526 ap->ops->sff_dev_select(ap, device); 527 528 ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_NSECT); 529 ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_LBAL); 530 531 ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_NSECT); 532 ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_LBAL); 533 534 ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_NSECT); 535 ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_LBAL); 536 537 nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT); 538 lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL); 539 540 if ((nsect == 0x55) && (lbal == 0xaa)) 541 return true; 542 543 return false; 544 } 545 546 /* Note: original code is ata_sff_wait_after_reset */ 547 static int ep93xx_pata_wait_after_reset(struct ata_link *link, 548 unsigned int devmask, 549 unsigned long deadline) 550 { 551 struct ata_port *ap = link->ap; 552 struct ep93xx_pata_data *drv_data = ap->host->private_data; 553 unsigned int dev0 = devmask & (1 << 0); 554 unsigned int dev1 = devmask & (1 << 1); 555 int rc, ret = 0; 556 557 ata_msleep(ap, ATA_WAIT_AFTER_RESET); 558 559 /* always check readiness of the master device */ 560 rc = ata_sff_wait_ready(link, deadline); 561 /* 562 * -ENODEV means the odd clown forgot the D7 pulldown resistor 563 * and TF status is 0xff, bail out on it too. 564 */ 565 if (rc) 566 return rc; 567 568 /* 569 * if device 1 was found in ata_devchk, wait for register 570 * access briefly, then wait for BSY to clear. 571 */ 572 if (dev1) { 573 int i; 574 575 ap->ops->sff_dev_select(ap, 1); 576 577 /* 578 * Wait for register access. Some ATAPI devices fail 579 * to set nsect/lbal after reset, so don't waste too 580 * much time on it. We're gonna wait for !BSY anyway. 581 */ 582 for (i = 0; i < 2; i++) { 583 u8 nsect, lbal; 584 585 nsect = ep93xx_pata_read_reg(drv_data, 586 IDECTRL_ADDR_NSECT); 587 lbal = ep93xx_pata_read_reg(drv_data, 588 IDECTRL_ADDR_LBAL); 589 if (nsect == 1 && lbal == 1) 590 break; 591 msleep(50); /* give drive a breather */ 592 } 593 594 rc = ata_sff_wait_ready(link, deadline); 595 if (rc) { 596 if (rc != -ENODEV) 597 return rc; 598 ret = rc; 599 } 600 } 601 /* is all this really necessary? */ 602 ap->ops->sff_dev_select(ap, 0); 603 if (dev1) 604 ap->ops->sff_dev_select(ap, 1); 605 if (dev0) 606 ap->ops->sff_dev_select(ap, 0); 607 608 return ret; 609 } 610 611 /* Note: original code is ata_bus_softreset */ 612 static int ep93xx_pata_bus_softreset(struct ata_port *ap, unsigned int devmask, 613 unsigned long deadline) 614 { 615 struct ep93xx_pata_data *drv_data = ap->host->private_data; 616 617 ep93xx_pata_write_reg(drv_data, ap->ctl, IDECTRL_ADDR_CTL); 618 udelay(20); /* FIXME: flush */ 619 ep93xx_pata_write_reg(drv_data, ap->ctl | ATA_SRST, IDECTRL_ADDR_CTL); 620 udelay(20); /* FIXME: flush */ 621 ep93xx_pata_write_reg(drv_data, ap->ctl, IDECTRL_ADDR_CTL); 622 ap->last_ctl = ap->ctl; 623 624 return ep93xx_pata_wait_after_reset(&ap->link, devmask, deadline); 625 } 626 627 static void ep93xx_pata_release_dma(struct ep93xx_pata_data *drv_data) 628 { 629 if (drv_data->dma_rx_channel) { 630 dma_release_channel(drv_data->dma_rx_channel); 631 drv_data->dma_rx_channel = NULL; 632 } 633 if (drv_data->dma_tx_channel) { 634 dma_release_channel(drv_data->dma_tx_channel); 635 drv_data->dma_tx_channel = NULL; 636 } 637 } 638 639 static bool ep93xx_pata_dma_filter(struct dma_chan *chan, void *filter_param) 640 { 641 if (ep93xx_dma_chan_is_m2p(chan)) 642 return false; 643 644 chan->private = filter_param; 645 return true; 646 } 647 648 static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data) 649 { 650 const struct platform_device *pdev = drv_data->pdev; 651 dma_cap_mask_t mask; 652 struct dma_slave_config conf; 653 654 dma_cap_zero(mask); 655 dma_cap_set(DMA_SLAVE, mask); 656 657 /* 658 * Request two channels for IDE. Another possibility would be 659 * to request only one channel, and reprogram it's direction at 660 * start of new transfer. 661 */ 662 drv_data->dma_rx_data.port = EP93XX_DMA_IDE; 663 drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM; 664 drv_data->dma_rx_data.name = "ep93xx-pata-rx"; 665 drv_data->dma_rx_channel = dma_request_channel(mask, 666 ep93xx_pata_dma_filter, &drv_data->dma_rx_data); 667 if (!drv_data->dma_rx_channel) 668 return; 669 670 drv_data->dma_tx_data.port = EP93XX_DMA_IDE; 671 drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV; 672 drv_data->dma_tx_data.name = "ep93xx-pata-tx"; 673 drv_data->dma_tx_channel = dma_request_channel(mask, 674 ep93xx_pata_dma_filter, &drv_data->dma_tx_data); 675 if (!drv_data->dma_tx_channel) { 676 dma_release_channel(drv_data->dma_rx_channel); 677 return; 678 } 679 680 /* Configure receive channel direction and source address */ 681 memset(&conf, 0, sizeof(conf)); 682 conf.direction = DMA_DEV_TO_MEM; 683 conf.src_addr = drv_data->udma_in_phys; 684 conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 685 if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) { 686 dev_err(&pdev->dev, "failed to configure rx dma channel\n"); 687 ep93xx_pata_release_dma(drv_data); 688 return; 689 } 690 691 /* Configure transmit channel direction and destination address */ 692 memset(&conf, 0, sizeof(conf)); 693 conf.direction = DMA_MEM_TO_DEV; 694 conf.dst_addr = drv_data->udma_out_phys; 695 conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 696 if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) { 697 dev_err(&pdev->dev, "failed to configure tx dma channel\n"); 698 ep93xx_pata_release_dma(drv_data); 699 } 700 } 701 702 static void ep93xx_pata_dma_start(struct ata_queued_cmd *qc) 703 { 704 struct dma_async_tx_descriptor *txd; 705 struct ep93xx_pata_data *drv_data = qc->ap->host->private_data; 706 void __iomem *base = drv_data->ide_base; 707 struct ata_device *adev = qc->dev; 708 u32 v = qc->dma_dir == DMA_TO_DEVICE ? IDEUDMAOP_RWOP : 0; 709 struct dma_chan *channel = qc->dma_dir == DMA_TO_DEVICE 710 ? drv_data->dma_tx_channel : drv_data->dma_rx_channel; 711 712 txd = dmaengine_prep_slave_sg(channel, qc->sg, qc->n_elem, qc->dma_dir, 713 DMA_CTRL_ACK); 714 if (!txd) { 715 dev_err(qc->ap->dev, "failed to prepare slave for sg dma\n"); 716 return; 717 } 718 txd->callback = NULL; 719 txd->callback_param = NULL; 720 721 if (dmaengine_submit(txd) < 0) { 722 dev_err(qc->ap->dev, "failed to submit dma transfer\n"); 723 return; 724 } 725 dma_async_issue_pending(channel); 726 727 /* 728 * When enabling UDMA operation, IDEUDMAOP register needs to be 729 * programmed in three step sequence: 730 * 1) set or clear the RWOP bit, 731 * 2) perform dummy read of the register, 732 * 3) set the UEN bit. 733 */ 734 writel(v, base + IDEUDMAOP); 735 readl(base + IDEUDMAOP); 736 writel(v | IDEUDMAOP_UEN, base + IDEUDMAOP); 737 738 writel(IDECFG_IDEEN | IDECFG_UDMA | 739 ((adev->xfer_mode - XFER_UDMA_0) << IDECFG_MODE_SHIFT), 740 base + IDECFG); 741 } 742 743 static void ep93xx_pata_dma_stop(struct ata_queued_cmd *qc) 744 { 745 struct ep93xx_pata_data *drv_data = qc->ap->host->private_data; 746 void __iomem *base = drv_data->ide_base; 747 748 /* terminate all dma transfers, if not yet finished */ 749 dmaengine_terminate_all(drv_data->dma_rx_channel); 750 dmaengine_terminate_all(drv_data->dma_tx_channel); 751 752 /* 753 * To properly stop IDE-DMA, IDEUDMAOP register must to be cleared 754 * and IDECTRL register must be set to default value. 755 */ 756 writel(0, base + IDEUDMAOP); 757 writel(readl(base + IDECTRL) | IDECTRL_DIOWN | IDECTRL_DIORN | 758 IDECTRL_CS0N | IDECTRL_CS1N, base + IDECTRL); 759 760 ep93xx_pata_enable_pio(drv_data->ide_base, 761 qc->dev->pio_mode - XFER_PIO_0); 762 763 ata_sff_dma_pause(qc->ap); 764 } 765 766 static void ep93xx_pata_dma_setup(struct ata_queued_cmd *qc) 767 { 768 qc->ap->ops->sff_exec_command(qc->ap, &qc->tf); 769 } 770 771 static u8 ep93xx_pata_dma_status(struct ata_port *ap) 772 { 773 struct ep93xx_pata_data *drv_data = ap->host->private_data; 774 u32 val = readl(drv_data->ide_base + IDEUDMASTS); 775 776 /* 777 * UDMA Status Register bits: 778 * 779 * DMAIDE - DMA request signal from UDMA state machine, 780 * INTIDE - INT line generated by UDMA because of errors in the 781 * state machine, 782 * SBUSY - UDMA state machine busy, not in idle state, 783 * NDO - error for data-out not completed, 784 * NDI - error for data-in not completed, 785 * N4X - error for data transferred not multiplies of four 786 * 32-bit words. 787 * (EP93xx UG p27-17) 788 */ 789 if (val & IDEUDMASTS_NDO || val & IDEUDMASTS_NDI || 790 val & IDEUDMASTS_N4X || val & IDEUDMASTS_INTIDE) 791 return ATA_DMA_ERR; 792 793 /* read INTRQ (INT[3]) pin input state */ 794 if (readl(drv_data->ide_base + IDECTRL) & IDECTRL_INTRQ) 795 return ATA_DMA_INTR; 796 797 if (val & IDEUDMASTS_SBUSY || val & IDEUDMASTS_DMAIDE) 798 return ATA_DMA_ACTIVE; 799 800 return 0; 801 } 802 803 /* Note: original code is ata_sff_softreset */ 804 static int ep93xx_pata_softreset(struct ata_link *al, unsigned int *classes, 805 unsigned long deadline) 806 { 807 struct ata_port *ap = al->ap; 808 unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; 809 unsigned int devmask = 0; 810 int rc; 811 u8 err; 812 813 /* determine if device 0/1 are present */ 814 if (ep93xx_pata_device_is_present(ap, 0)) 815 devmask |= (1 << 0); 816 if (slave_possible && ep93xx_pata_device_is_present(ap, 1)) 817 devmask |= (1 << 1); 818 819 /* select device 0 again */ 820 ap->ops->sff_dev_select(al->ap, 0); 821 822 /* issue bus reset */ 823 rc = ep93xx_pata_bus_softreset(ap, devmask, deadline); 824 /* if link is ocuppied, -ENODEV too is an error */ 825 if (rc && (rc != -ENODEV || sata_scr_valid(al))) { 826 ata_link_err(al, "SRST failed (errno=%d)\n", rc); 827 return rc; 828 } 829 830 /* determine by signature whether we have ATA or ATAPI devices */ 831 classes[0] = ata_sff_dev_classify(&al->device[0], devmask & (1 << 0), 832 &err); 833 if (slave_possible && err != 0x81) 834 classes[1] = ata_sff_dev_classify(&al->device[1], 835 devmask & (1 << 1), &err); 836 837 return 0; 838 } 839 840 /* Note: original code is ata_sff_drain_fifo */ 841 static void ep93xx_pata_drain_fifo(struct ata_queued_cmd *qc) 842 { 843 int count; 844 struct ata_port *ap; 845 struct ep93xx_pata_data *drv_data; 846 847 /* We only need to flush incoming data when a command was running */ 848 if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) 849 return; 850 851 ap = qc->ap; 852 drv_data = ap->host->private_data; 853 /* Drain up to 64K of data before we give up this recovery method */ 854 for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) 855 && count < 65536; count += 2) 856 ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_DATA); 857 858 if (count) 859 ata_port_dbg(ap, "drained %d bytes to clear DRQ.\n", count); 860 861 } 862 863 static int ep93xx_pata_port_start(struct ata_port *ap) 864 { 865 struct ep93xx_pata_data *drv_data = ap->host->private_data; 866 867 /* 868 * Set timings to safe values at startup (= number of ns from ATA 869 * specification), we'll switch to properly calculated values later. 870 */ 871 drv_data->t = *ata_timing_find_mode(XFER_PIO_0); 872 return 0; 873 } 874 875 static struct scsi_host_template ep93xx_pata_sht = { 876 ATA_BASE_SHT(DRV_NAME), 877 /* ep93xx dma implementation limit */ 878 .sg_tablesize = 32, 879 /* ep93xx dma can't transfer 65536 bytes at once */ 880 .dma_boundary = 0x7fff, 881 }; 882 883 static struct ata_port_operations ep93xx_pata_port_ops = { 884 .inherits = &ata_bmdma_port_ops, 885 886 .qc_prep = ata_noop_qc_prep, 887 888 .softreset = ep93xx_pata_softreset, 889 .hardreset = ATA_OP_NULL, 890 891 .sff_dev_select = ep93xx_pata_dev_select, 892 .sff_set_devctl = ep93xx_pata_set_devctl, 893 .sff_check_status = ep93xx_pata_check_status, 894 .sff_check_altstatus = ep93xx_pata_check_altstatus, 895 .sff_tf_load = ep93xx_pata_tf_load, 896 .sff_tf_read = ep93xx_pata_tf_read, 897 .sff_exec_command = ep93xx_pata_exec_command, 898 .sff_data_xfer = ep93xx_pata_data_xfer, 899 .sff_drain_fifo = ep93xx_pata_drain_fifo, 900 .sff_irq_clear = ATA_OP_NULL, 901 902 .set_piomode = ep93xx_pata_set_piomode, 903 904 .bmdma_setup = ep93xx_pata_dma_setup, 905 .bmdma_start = ep93xx_pata_dma_start, 906 .bmdma_stop = ep93xx_pata_dma_stop, 907 .bmdma_status = ep93xx_pata_dma_status, 908 909 .cable_detect = ata_cable_unknown, 910 .port_start = ep93xx_pata_port_start, 911 }; 912 913 static int ep93xx_pata_probe(struct platform_device *pdev) 914 { 915 struct ep93xx_pata_data *drv_data; 916 struct ata_host *host; 917 struct ata_port *ap; 918 int irq; 919 struct resource *mem_res; 920 void __iomem *ide_base; 921 int err; 922 923 err = ep93xx_ide_acquire_gpio(pdev); 924 if (err) 925 return err; 926 927 /* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */ 928 irq = platform_get_irq(pdev, 0); 929 if (irq < 0) { 930 err = irq; 931 goto err_rel_gpio; 932 } 933 934 mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 935 ide_base = devm_ioremap_resource(&pdev->dev, mem_res); 936 if (IS_ERR(ide_base)) { 937 err = PTR_ERR(ide_base); 938 goto err_rel_gpio; 939 } 940 941 drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL); 942 if (!drv_data) { 943 err = -ENXIO; 944 goto err_rel_gpio; 945 } 946 947 drv_data->pdev = pdev; 948 drv_data->ide_base = ide_base; 949 drv_data->udma_in_phys = mem_res->start + IDEUDMADATAIN; 950 drv_data->udma_out_phys = mem_res->start + IDEUDMADATAOUT; 951 ep93xx_pata_dma_init(drv_data); 952 953 /* allocate host */ 954 host = ata_host_alloc(&pdev->dev, 1); 955 if (!host) { 956 err = -ENXIO; 957 goto err_rel_dma; 958 } 959 960 ep93xx_pata_clear_regs(ide_base); 961 962 host->private_data = drv_data; 963 964 ap = host->ports[0]; 965 ap->dev = &pdev->dev; 966 ap->ops = &ep93xx_pata_port_ops; 967 ap->flags |= ATA_FLAG_SLAVE_POSS; 968 ap->pio_mask = ATA_PIO4; 969 970 /* 971 * Maximum UDMA modes: 972 * EP931x rev.E0 - UDMA2 973 * EP931x rev.E1 - UDMA3 974 * EP931x rev.E2 - UDMA4 975 * 976 * MWDMA support was removed from EP931x rev.E2, 977 * so this driver supports only UDMA modes. 978 */ 979 if (drv_data->dma_rx_channel && drv_data->dma_tx_channel) { 980 int chip_rev = ep93xx_chip_revision(); 981 982 if (chip_rev == EP93XX_CHIP_REV_E1) 983 ap->udma_mask = ATA_UDMA3; 984 else if (chip_rev == EP93XX_CHIP_REV_E2) 985 ap->udma_mask = ATA_UDMA4; 986 else 987 ap->udma_mask = ATA_UDMA2; 988 } 989 990 /* defaults, pio 0 */ 991 ep93xx_pata_enable_pio(ide_base, 0); 992 993 dev_info(&pdev->dev, "version " DRV_VERSION "\n"); 994 995 /* activate host */ 996 err = ata_host_activate(host, irq, ata_bmdma_interrupt, 0, 997 &ep93xx_pata_sht); 998 if (err == 0) 999 return 0; 1000 1001 err_rel_dma: 1002 ep93xx_pata_release_dma(drv_data); 1003 err_rel_gpio: 1004 ep93xx_ide_release_gpio(pdev); 1005 return err; 1006 } 1007 1008 static int ep93xx_pata_remove(struct platform_device *pdev) 1009 { 1010 struct ata_host *host = platform_get_drvdata(pdev); 1011 struct ep93xx_pata_data *drv_data = host->private_data; 1012 1013 ata_host_detach(host); 1014 ep93xx_pata_release_dma(drv_data); 1015 ep93xx_pata_clear_regs(drv_data->ide_base); 1016 ep93xx_ide_release_gpio(pdev); 1017 return 0; 1018 } 1019 1020 static struct platform_driver ep93xx_pata_platform_driver = { 1021 .driver = { 1022 .name = DRV_NAME, 1023 }, 1024 .probe = ep93xx_pata_probe, 1025 .remove = ep93xx_pata_remove, 1026 }; 1027 1028 module_platform_driver(ep93xx_pata_platform_driver); 1029 1030 MODULE_AUTHOR("Alessandro Zummo, Lennert Buytenhek, Joao Ramos, " 1031 "Bartlomiej Zolnierkiewicz, Rafal Prylowski"); 1032 MODULE_DESCRIPTION("low-level driver for cirrus ep93xx IDE controller"); 1033 MODULE_LICENSE("GPL"); 1034 MODULE_VERSION(DRV_VERSION); 1035 MODULE_ALIAS("platform:pata_ep93xx"); 1036