1 /* 2 * pata-cs5535.c - CS5535 PATA for new ATA layer 3 * (C) 2005-2006 Red Hat Inc 4 * Alan Cox <alan@lxorguk.ukuu.org.uk> 5 * 6 * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and 7 * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de> 8 * and Alexander Kiausch <alex.kiausch@t-online.de> 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 22 * 23 * Loosely based on the piix & svwks drivers. 24 * 25 * Documentation: 26 * Available from AMD web site. 27 * TODO 28 * Review errata to see if serializing is necessary 29 */ 30 31 #include <linux/kernel.h> 32 #include <linux/module.h> 33 #include <linux/pci.h> 34 #include <linux/init.h> 35 #include <linux/blkdev.h> 36 #include <linux/delay.h> 37 #include <scsi/scsi_host.h> 38 #include <linux/libata.h> 39 #include <asm/msr.h> 40 41 #define DRV_NAME "pata_cs5535" 42 #define DRV_VERSION "0.2.12" 43 44 /* 45 * The Geode (Aka Athlon GX now) uses an internal MSR based 46 * bus system for control. Demented but there you go. 47 */ 48 49 #define MSR_ATAC_BASE 0x51300000 50 #define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) 51 #define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) 52 #define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) 53 #define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) 54 #define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) 55 #define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) 56 #define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) 57 #define ATAC_RESET (MSR_ATAC_BASE+0x10) 58 #define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) 59 #define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) 60 #define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) 61 #define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) 62 #define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) 63 64 #define ATAC_BM0_CMD_PRIM 0x00 65 #define ATAC_BM0_STS_PRIM 0x02 66 #define ATAC_BM0_PRD 0x04 67 68 #define CS5535_CABLE_DETECT 0x48 69 70 /** 71 * cs5535_cable_detect - detect cable type 72 * @ap: Port to detect on 73 * 74 * Perform cable detection for ATA66 capable cable. Return a libata 75 * cable type. 76 */ 77 78 static int cs5535_cable_detect(struct ata_port *ap) 79 { 80 u8 cable; 81 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 82 83 pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable); 84 if (cable & 1) 85 return ATA_CBL_PATA80; 86 else 87 return ATA_CBL_PATA40; 88 } 89 90 /** 91 * cs5535_set_piomode - PIO setup 92 * @ap: ATA interface 93 * @adev: device on the interface 94 * 95 * Set our PIO requirements. The CS5535 is pretty clean about all this 96 */ 97 98 static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) 99 { 100 static const u16 pio_timings[5] = { 101 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 102 }; 103 static const u16 pio_cmd_timings[5] = { 104 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 105 }; 106 u32 reg, dummy; 107 struct ata_device *pair = ata_dev_pair(adev); 108 109 int mode = adev->pio_mode - XFER_PIO_0; 110 int cmdmode = mode; 111 112 /* Command timing has to be for the lowest of the pair of devices */ 113 if (pair) { 114 int pairmode = pair->pio_mode - XFER_PIO_0; 115 cmdmode = min(mode, pairmode); 116 /* Write the other drive timing register if it changed */ 117 if (cmdmode < pairmode) 118 wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno, 119 pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0); 120 } 121 /* Write the drive timing register */ 122 wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno, 123 pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0); 124 125 /* Set the PIO "format 1" bit in the DMA timing register */ 126 rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); 127 wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0); 128 } 129 130 /** 131 * cs5535_set_dmamode - DMA timing setup 132 * @ap: ATA interface 133 * @adev: Device being configured 134 * 135 */ 136 137 static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev) 138 { 139 static const u32 udma_timings[5] = { 140 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 141 }; 142 static const u32 mwdma_timings[3] = { 143 0x7F0FFFF3, 0x7F035352, 0x7F024241 144 }; 145 u32 reg, dummy; 146 int mode = adev->dma_mode; 147 148 rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); 149 reg &= 0x80000000UL; 150 if (mode >= XFER_UDMA_0) 151 reg |= udma_timings[mode - XFER_UDMA_0]; 152 else 153 reg |= mwdma_timings[mode - XFER_MW_DMA_0]; 154 wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0); 155 } 156 157 static struct scsi_host_template cs5535_sht = { 158 ATA_BMDMA_SHT(DRV_NAME), 159 }; 160 161 static struct ata_port_operations cs5535_port_ops = { 162 .inherits = &ata_bmdma_port_ops, 163 .cable_detect = cs5535_cable_detect, 164 .set_piomode = cs5535_set_piomode, 165 .set_dmamode = cs5535_set_dmamode, 166 }; 167 168 /** 169 * cs5535_init_one - Initialise a CS5530 170 * @dev: PCI device 171 * @id: Entry in match table 172 * 173 * Install a driver for the newly found CS5530 companion chip. Most of 174 * this is just housekeeping. We have to set the chip up correctly and 175 * turn off various bits of emulation magic. 176 */ 177 178 static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) 179 { 180 static const struct ata_port_info info = { 181 .flags = ATA_FLAG_SLAVE_POSS, 182 .pio_mask = ATA_PIO4, 183 .mwdma_mask = ATA_MWDMA2, 184 .udma_mask = ATA_UDMA4, 185 .port_ops = &cs5535_port_ops 186 }; 187 const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; 188 189 return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0); 190 } 191 192 static const struct pci_device_id cs5535[] = { 193 { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), }, 194 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), }, 195 196 { }, 197 }; 198 199 static struct pci_driver cs5535_pci_driver = { 200 .name = DRV_NAME, 201 .id_table = cs5535, 202 .probe = cs5535_init_one, 203 .remove = ata_pci_remove_one, 204 #ifdef CONFIG_PM 205 .suspend = ata_pci_device_suspend, 206 .resume = ata_pci_device_resume, 207 #endif 208 }; 209 210 static int __init cs5535_init(void) 211 { 212 return pci_register_driver(&cs5535_pci_driver); 213 } 214 215 static void __exit cs5535_exit(void) 216 { 217 pci_unregister_driver(&cs5535_pci_driver); 218 } 219 220 MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch"); 221 MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535"); 222 MODULE_LICENSE("GPL"); 223 MODULE_DEVICE_TABLE(pci, cs5535); 224 MODULE_VERSION(DRV_VERSION); 225 226 module_init(cs5535_init); 227 module_exit(cs5535_exit); 228