1 /* 2 * pata_cmd640.c - CMD640 PCI PATA for new ATA layer 3 * (C) 2007 Red Hat Inc 4 * 5 * Based upon 6 * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 7 * 8 * Copyright (C) 1995-1996 Linus Torvalds & authors (see driver) 9 * 10 * This drives only the PCI version of the controller. If you have a 11 * VLB one then we have enough docs to support it but you can write 12 * your own code. 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/pci.h> 18 #include <linux/blkdev.h> 19 #include <linux/delay.h> 20 #include <linux/gfp.h> 21 #include <scsi/scsi_host.h> 22 #include <linux/libata.h> 23 24 #define DRV_NAME "pata_cmd640" 25 #define DRV_VERSION "0.0.5" 26 27 struct cmd640_reg { 28 int last; 29 u8 reg58[ATA_MAX_DEVICES]; 30 }; 31 32 enum { 33 CFR = 0x50, 34 CNTRL = 0x51, 35 CMDTIM = 0x52, 36 ARTIM0 = 0x53, 37 DRWTIM0 = 0x54, 38 ARTIM23 = 0x57, 39 DRWTIM23 = 0x58, 40 BRST = 0x59 41 }; 42 43 /** 44 * cmd640_set_piomode - set initial PIO mode data 45 * @ap: ATA port 46 * @adev: ATA device 47 * 48 * Called to do the PIO mode setup. 49 */ 50 51 static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev) 52 { 53 struct cmd640_reg *timing = ap->private_data; 54 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 55 struct ata_timing t; 56 const unsigned long T = 1000000 / 33; 57 const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; 58 u8 reg; 59 int arttim = ARTIM0 + 2 * adev->devno; 60 struct ata_device *pair = ata_dev_pair(adev); 61 62 if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { 63 printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); 64 return; 65 } 66 67 /* The second channel has shared timings and the setup timing is 68 messy to switch to merge it for worst case */ 69 if (ap->port_no && pair) { 70 struct ata_timing p; 71 ata_timing_compute(pair, pair->pio_mode, &p, T, 1); 72 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP); 73 } 74 75 /* Make the timings fit */ 76 if (t.recover > 16) { 77 t.active += t.recover - 16; 78 t.recover = 16; 79 } 80 if (t.active > 16) 81 t.active = 16; 82 83 /* Now convert the clocks into values we can actually stuff into 84 the chip */ 85 86 if (t.recover > 1) 87 t.recover--; /* 640B only */ 88 else 89 t.recover = 15; 90 91 if (t.setup > 4) 92 t.setup = 0xC0; 93 else 94 t.setup = setup_data[t.setup]; 95 96 if (ap->port_no == 0) { 97 t.active &= 0x0F; /* 0 = 16 */ 98 99 /* Load setup timing */ 100 pci_read_config_byte(pdev, arttim, ®); 101 reg &= 0x3F; 102 reg |= t.setup; 103 pci_write_config_byte(pdev, arttim, reg); 104 105 /* Load active/recovery */ 106 pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover); 107 } else { 108 /* Save the shared timings for channel, they will be loaded 109 by qc_issue. Reloading the setup time is expensive so we 110 keep a merged one loaded */ 111 pci_read_config_byte(pdev, ARTIM23, ®); 112 reg &= 0x3F; 113 reg |= t.setup; 114 pci_write_config_byte(pdev, ARTIM23, reg); 115 timing->reg58[adev->devno] = (t.active << 4) | t.recover; 116 } 117 } 118 119 120 /** 121 * cmd640_qc_issue - command preparation hook 122 * @qc: Command to be issued 123 * 124 * Channel 1 has shared timings. We must reprogram the 125 * clock each drive 2/3 switch we do. 126 */ 127 128 static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc) 129 { 130 struct ata_port *ap = qc->ap; 131 struct ata_device *adev = qc->dev; 132 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 133 struct cmd640_reg *timing = ap->private_data; 134 135 if (ap->port_no != 0 && adev->devno != timing->last) { 136 pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]); 137 timing->last = adev->devno; 138 } 139 return ata_sff_qc_issue(qc); 140 } 141 142 /** 143 * cmd640_port_start - port setup 144 * @ap: ATA port being set up 145 * 146 * The CMD640 needs to maintain private data structures so we 147 * allocate space here. 148 */ 149 150 static int cmd640_port_start(struct ata_port *ap) 151 { 152 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 153 struct cmd640_reg *timing; 154 155 timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL); 156 if (timing == NULL) 157 return -ENOMEM; 158 timing->last = -1; /* Force a load */ 159 ap->private_data = timing; 160 return 0; 161 } 162 163 static bool cmd640_sff_irq_check(struct ata_port *ap) 164 { 165 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 166 int irq_reg = ap->port_no ? ARTIM23 : CFR; 167 u8 irq_stat, irq_mask = ap->port_no ? 0x10 : 0x04; 168 169 pci_read_config_byte(pdev, irq_reg, &irq_stat); 170 171 return irq_stat & irq_mask; 172 } 173 174 static struct scsi_host_template cmd640_sht = { 175 ATA_PIO_SHT(DRV_NAME), 176 }; 177 178 static struct ata_port_operations cmd640_port_ops = { 179 .inherits = &ata_sff_port_ops, 180 /* In theory xfer_noirq is not needed once we kill the prefetcher */ 181 .sff_data_xfer = ata_sff_data_xfer_noirq, 182 .sff_irq_check = cmd640_sff_irq_check, 183 .qc_issue = cmd640_qc_issue, 184 .cable_detect = ata_cable_40wire, 185 .set_piomode = cmd640_set_piomode, 186 .port_start = cmd640_port_start, 187 }; 188 189 static void cmd640_hardware_init(struct pci_dev *pdev) 190 { 191 u8 ctrl; 192 193 /* CMD640 detected, commiserations */ 194 pci_write_config_byte(pdev, 0x5B, 0x00); 195 /* PIO0 command cycles */ 196 pci_write_config_byte(pdev, CMDTIM, 0); 197 /* 512 byte bursts (sector) */ 198 pci_write_config_byte(pdev, BRST, 0x40); 199 /* 200 * A reporter a long time ago 201 * Had problems with the data fifo 202 * So don't run the risk 203 * Of putting crap on the disk 204 * For its better just to go slow 205 */ 206 /* Do channel 0 */ 207 pci_read_config_byte(pdev, CNTRL, &ctrl); 208 pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0); 209 /* Ditto for channel 1 */ 210 pci_read_config_byte(pdev, ARTIM23, &ctrl); 211 ctrl |= 0x0C; 212 pci_write_config_byte(pdev, ARTIM23, ctrl); 213 } 214 215 static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) 216 { 217 static const struct ata_port_info info = { 218 .flags = ATA_FLAG_SLAVE_POSS, 219 .pio_mask = ATA_PIO4, 220 .port_ops = &cmd640_port_ops 221 }; 222 const struct ata_port_info *ppi[] = { &info, NULL }; 223 int rc; 224 225 rc = pcim_enable_device(pdev); 226 if (rc) 227 return rc; 228 229 cmd640_hardware_init(pdev); 230 231 return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL, 0); 232 } 233 234 #ifdef CONFIG_PM_SLEEP 235 static int cmd640_reinit_one(struct pci_dev *pdev) 236 { 237 struct ata_host *host = pci_get_drvdata(pdev); 238 int rc; 239 240 rc = ata_pci_device_do_resume(pdev); 241 if (rc) 242 return rc; 243 cmd640_hardware_init(pdev); 244 ata_host_resume(host); 245 return 0; 246 } 247 #endif 248 249 static const struct pci_device_id cmd640[] = { 250 { PCI_VDEVICE(CMD, 0x640), 0 }, 251 { }, 252 }; 253 254 static struct pci_driver cmd640_pci_driver = { 255 .name = DRV_NAME, 256 .id_table = cmd640, 257 .probe = cmd640_init_one, 258 .remove = ata_pci_remove_one, 259 #ifdef CONFIG_PM_SLEEP 260 .suspend = ata_pci_device_suspend, 261 .resume = cmd640_reinit_one, 262 #endif 263 }; 264 265 module_pci_driver(cmd640_pci_driver); 266 267 MODULE_AUTHOR("Alan Cox"); 268 MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers"); 269 MODULE_LICENSE("GPL"); 270 MODULE_DEVICE_TABLE(pci, cmd640); 271 MODULE_VERSION(DRV_VERSION); 272