1 /* 2 * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver 3 * 4 * (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com> 5 * 6 * Per Atp867 data sheet rev 1.2, Acard. 7 * Based in part on early ide code from 8 * 2003-2004 by Eric Uhrhane, Google, Inc. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 23 * 24 * 25 * TODO: 26 * 1. RAID features [comparison, XOR, striping, mirroring, etc.] 27 */ 28 29 #include <linux/kernel.h> 30 #include <linux/module.h> 31 #include <linux/pci.h> 32 #include <linux/blkdev.h> 33 #include <linux/delay.h> 34 #include <linux/device.h> 35 #include <linux/gfp.h> 36 #include <scsi/scsi_host.h> 37 #include <linux/libata.h> 38 39 #define DRV_NAME "pata_atp867x" 40 #define DRV_VERSION "0.7.5" 41 42 /* 43 * IO Registers 44 * Note that all runtime hot priv ports are cached in ap private_data 45 */ 46 47 enum { 48 ATP867X_IO_CHANNEL_OFFSET = 0x10, 49 50 /* 51 * IO Register Bitfields 52 */ 53 54 ATP867X_IO_PIOSPD_ACTIVE_SHIFT = 4, 55 ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0, 56 57 ATP867X_IO_DMAMODE_MSTR_SHIFT = 0, 58 ATP867X_IO_DMAMODE_MSTR_MASK = 0x07, 59 ATP867X_IO_DMAMODE_SLAVE_SHIFT = 4, 60 ATP867X_IO_DMAMODE_SLAVE_MASK = 0x70, 61 62 ATP867X_IO_DMAMODE_UDMA_6 = 0x07, 63 ATP867X_IO_DMAMODE_UDMA_5 = 0x06, 64 ATP867X_IO_DMAMODE_UDMA_4 = 0x05, 65 ATP867X_IO_DMAMODE_UDMA_3 = 0x04, 66 ATP867X_IO_DMAMODE_UDMA_2 = 0x03, 67 ATP867X_IO_DMAMODE_UDMA_1 = 0x02, 68 ATP867X_IO_DMAMODE_UDMA_0 = 0x01, 69 ATP867X_IO_DMAMODE_DISABLE = 0x00, 70 71 ATP867X_IO_SYS_INFO_66MHZ = 0x04, 72 ATP867X_IO_SYS_INFO_SLOW_UDMA5 = 0x02, 73 ATP867X_IO_SYS_MASK_RESERVED = (~0xf1), 74 75 ATP867X_IO_PORTSPD_VAL = 0x1143, 76 ATP867X_PREREAD_VAL = 0x0200, 77 78 ATP867X_NUM_PORTS = 4, 79 ATP867X_BAR_IOBASE = 0, 80 ATP867X_BAR_ROMBASE = 6, 81 }; 82 83 #define ATP867X_IOBASE(ap) ((ap)->host->iomap[0]) 84 #define ATP867X_SYS_INFO(ap) (0x3F + ATP867X_IOBASE(ap)) 85 86 #define ATP867X_IO_PORTBASE(ap, port) (0x00 + ATP867X_IOBASE(ap) + \ 87 (port) * ATP867X_IO_CHANNEL_OFFSET) 88 #define ATP867X_IO_DMABASE(ap, port) (0x40 + \ 89 ATP867X_IO_PORTBASE((ap), (port))) 90 91 #define ATP867X_IO_STATUS(ap, port) (0x07 + \ 92 ATP867X_IO_PORTBASE((ap), (port))) 93 #define ATP867X_IO_ALTSTATUS(ap, port) (0x0E + \ 94 ATP867X_IO_PORTBASE((ap), (port))) 95 96 /* 97 * hot priv ports 98 */ 99 #define ATP867X_IO_MSTRPIOSPD(ap, port) (0x08 + \ 100 ATP867X_IO_DMABASE((ap), (port))) 101 #define ATP867X_IO_SLAVPIOSPD(ap, port) (0x09 + \ 102 ATP867X_IO_DMABASE((ap), (port))) 103 #define ATP867X_IO_8BPIOSPD(ap, port) (0x0A + \ 104 ATP867X_IO_DMABASE((ap), (port))) 105 #define ATP867X_IO_DMAMODE(ap, port) (0x0B + \ 106 ATP867X_IO_DMABASE((ap), (port))) 107 108 #define ATP867X_IO_PORTSPD(ap, port) (0x4A + \ 109 ATP867X_IO_PORTBASE((ap), (port))) 110 #define ATP867X_IO_PREREAD(ap, port) (0x4C + \ 111 ATP867X_IO_PORTBASE((ap), (port))) 112 113 struct atp867x_priv { 114 void __iomem *dma_mode; 115 void __iomem *mstr_piospd; 116 void __iomem *slave_piospd; 117 void __iomem *eightb_piospd; 118 int pci66mhz; 119 }; 120 121 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev) 122 { 123 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 124 struct atp867x_priv *dp = ap->private_data; 125 u8 speed = adev->dma_mode; 126 u8 b; 127 u8 mode = speed - XFER_UDMA_0 + 1; 128 129 /* 130 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed 131 * on 66MHz bus 132 * rev-A: UDMA_1~4 (5, 6 no change) 133 * rev-B: all UDMA modes 134 * UDMA_0 stays not to disable UDMA 135 */ 136 if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0 && 137 (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B || 138 mode < ATP867X_IO_DMAMODE_UDMA_5)) 139 mode--; 140 141 b = ioread8(dp->dma_mode); 142 if (adev->devno & 1) { 143 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) | 144 (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT); 145 } else { 146 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) | 147 (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT); 148 } 149 iowrite8(b, dp->dma_mode); 150 } 151 152 static int atp867x_get_active_clocks_shifted(struct ata_port *ap, 153 unsigned int clk) 154 { 155 struct atp867x_priv *dp = ap->private_data; 156 unsigned char clocks = clk; 157 158 /* 159 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed 160 * on 66MHz bus 161 */ 162 if (dp->pci66mhz) 163 clocks++; 164 165 switch (clocks) { 166 case 0: 167 clocks = 1; 168 break; 169 case 1 ... 6: 170 break; 171 default: 172 printk(KERN_WARNING "ATP867X: active %dclk is invalid. " 173 "Using 12clk.\n", clk); 174 case 9 ... 12: 175 clocks = 7; /* 12 clk */ 176 break; 177 case 7: 178 case 8: /* default 8 clk */ 179 clocks = 0; 180 goto active_clock_shift_done; 181 } 182 183 active_clock_shift_done: 184 return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT; 185 } 186 187 static int atp867x_get_recover_clocks_shifted(unsigned int clk) 188 { 189 unsigned char clocks = clk; 190 191 switch (clocks) { 192 case 0: 193 clocks = 1; 194 break; 195 case 1 ... 11: 196 break; 197 case 13: 198 case 14: 199 --clocks; /* by the spec */ 200 break; 201 case 15: 202 break; 203 default: 204 printk(KERN_WARNING "ATP867X: recover %dclk is invalid. " 205 "Using default 12clk.\n", clk); 206 case 12: /* default 12 clk */ 207 clocks = 0; 208 break; 209 } 210 211 return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT; 212 } 213 214 static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev) 215 { 216 struct ata_device *peer = ata_dev_pair(adev); 217 struct atp867x_priv *dp = ap->private_data; 218 u8 speed = adev->pio_mode; 219 struct ata_timing t, p; 220 int T, UT; 221 u8 b; 222 223 T = 1000000000 / 33333; 224 UT = T / 4; 225 226 ata_timing_compute(adev, speed, &t, T, UT); 227 if (peer && peer->pio_mode) { 228 ata_timing_compute(peer, peer->pio_mode, &p, T, UT); 229 ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT); 230 } 231 232 b = ioread8(dp->dma_mode); 233 if (adev->devno & 1) 234 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK); 235 else 236 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK); 237 iowrite8(b, dp->dma_mode); 238 239 b = atp867x_get_active_clocks_shifted(ap, t.active) | 240 atp867x_get_recover_clocks_shifted(t.recover); 241 242 if (adev->devno & 1) 243 iowrite8(b, dp->slave_piospd); 244 else 245 iowrite8(b, dp->mstr_piospd); 246 247 b = atp867x_get_active_clocks_shifted(ap, t.act8b) | 248 atp867x_get_recover_clocks_shifted(t.rec8b); 249 250 iowrite8(b, dp->eightb_piospd); 251 } 252 253 static int atp867x_cable_override(struct pci_dev *pdev) 254 { 255 if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP && 256 (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A || 257 pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) { 258 return 1; 259 } 260 return 0; 261 } 262 263 static int atp867x_cable_detect(struct ata_port *ap) 264 { 265 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 266 267 if (atp867x_cable_override(pdev)) 268 return ATA_CBL_PATA40_SHORT; 269 270 return ATA_CBL_PATA_UNK; 271 } 272 273 static struct scsi_host_template atp867x_sht = { 274 ATA_BMDMA_SHT(DRV_NAME), 275 }; 276 277 static struct ata_port_operations atp867x_ops = { 278 .inherits = &ata_bmdma_port_ops, 279 .cable_detect = atp867x_cable_detect, 280 .set_piomode = atp867x_set_piomode, 281 .set_dmamode = atp867x_set_dmamode, 282 }; 283 284 285 #ifdef ATP867X_DEBUG 286 static void atp867x_check_res(struct pci_dev *pdev) 287 { 288 int i; 289 unsigned long start, len; 290 291 /* Check the PCI resources for this channel are enabled */ 292 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { 293 start = pci_resource_start(pdev, i); 294 len = pci_resource_len(pdev, i); 295 printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n", 296 start, len); 297 } 298 } 299 300 static void atp867x_check_ports(struct ata_port *ap, int port) 301 { 302 struct ata_ioports *ioaddr = &ap->ioaddr; 303 struct atp867x_priv *dp = ap->private_data; 304 305 printk(KERN_DEBUG "ATP867X: port[%d] addresses\n" 306 " cmd_addr =0x%llx, 0x%llx\n" 307 " ctl_addr =0x%llx, 0x%llx\n" 308 " bmdma_addr =0x%llx, 0x%llx\n" 309 " data_addr =0x%llx\n" 310 " error_addr =0x%llx\n" 311 " feature_addr =0x%llx\n" 312 " nsect_addr =0x%llx\n" 313 " lbal_addr =0x%llx\n" 314 " lbam_addr =0x%llx\n" 315 " lbah_addr =0x%llx\n" 316 " device_addr =0x%llx\n" 317 " status_addr =0x%llx\n" 318 " command_addr =0x%llx\n" 319 " dp->dma_mode =0x%llx\n" 320 " dp->mstr_piospd =0x%llx\n" 321 " dp->slave_piospd =0x%llx\n" 322 " dp->eightb_piospd =0x%llx\n" 323 " dp->pci66mhz =0x%lx\n", 324 port, 325 (unsigned long long)ioaddr->cmd_addr, 326 (unsigned long long)ATP867X_IO_PORTBASE(ap, port), 327 (unsigned long long)ioaddr->ctl_addr, 328 (unsigned long long)ATP867X_IO_ALTSTATUS(ap, port), 329 (unsigned long long)ioaddr->bmdma_addr, 330 (unsigned long long)ATP867X_IO_DMABASE(ap, port), 331 (unsigned long long)ioaddr->data_addr, 332 (unsigned long long)ioaddr->error_addr, 333 (unsigned long long)ioaddr->feature_addr, 334 (unsigned long long)ioaddr->nsect_addr, 335 (unsigned long long)ioaddr->lbal_addr, 336 (unsigned long long)ioaddr->lbam_addr, 337 (unsigned long long)ioaddr->lbah_addr, 338 (unsigned long long)ioaddr->device_addr, 339 (unsigned long long)ioaddr->status_addr, 340 (unsigned long long)ioaddr->command_addr, 341 (unsigned long long)dp->dma_mode, 342 (unsigned long long)dp->mstr_piospd, 343 (unsigned long long)dp->slave_piospd, 344 (unsigned long long)dp->eightb_piospd, 345 (unsigned long)dp->pci66mhz); 346 } 347 #endif 348 349 static int atp867x_set_priv(struct ata_port *ap) 350 { 351 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 352 struct atp867x_priv *dp; 353 int port = ap->port_no; 354 355 dp = ap->private_data = 356 devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL); 357 if (dp == NULL) 358 return -ENOMEM; 359 360 dp->dma_mode = ATP867X_IO_DMAMODE(ap, port); 361 dp->mstr_piospd = ATP867X_IO_MSTRPIOSPD(ap, port); 362 dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port); 363 dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port); 364 365 dp->pci66mhz = 366 ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ; 367 368 return 0; 369 } 370 371 static void atp867x_fixup(struct ata_host *host) 372 { 373 struct pci_dev *pdev = to_pci_dev(host->dev); 374 struct ata_port *ap = host->ports[0]; 375 int i; 376 u8 v; 377 378 /* 379 * Broken BIOS might not set latency high enough 380 */ 381 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v); 382 if (v < 0x80) { 383 v = 0x80; 384 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v); 385 printk(KERN_DEBUG "ATP867X: set latency timer of device %s" 386 " to %d\n", pci_name(pdev), v); 387 } 388 389 /* 390 * init 8bit io ports speed(0aaarrrr) to 43h and 391 * init udma modes of master/slave to 0/0(11h) 392 */ 393 for (i = 0; i < ATP867X_NUM_PORTS; i++) 394 iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i)); 395 396 /* 397 * init PreREAD counts 398 */ 399 for (i = 0; i < ATP867X_NUM_PORTS; i++) 400 iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i)); 401 402 v = ioread8(ATP867X_IOBASE(ap) + 0x28); 403 v &= 0xcf; /* Enable INTA#: bit4=0 means enable */ 404 v |= 0xc0; /* Enable PCI burst, MRM & not immediate interrupts */ 405 iowrite8(v, ATP867X_IOBASE(ap) + 0x28); 406 407 /* 408 * Turn off the over clocked udma5 mode, only for Rev-B 409 */ 410 v = ioread8(ATP867X_SYS_INFO(ap)); 411 v &= ATP867X_IO_SYS_MASK_RESERVED; 412 if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B) 413 v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5; 414 iowrite8(v, ATP867X_SYS_INFO(ap)); 415 } 416 417 static int atp867x_ata_pci_sff_init_host(struct ata_host *host) 418 { 419 struct device *gdev = host->dev; 420 struct pci_dev *pdev = to_pci_dev(gdev); 421 unsigned int mask = 0; 422 int i, rc; 423 424 /* 425 * do not map rombase 426 */ 427 rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME); 428 if (rc == -EBUSY) 429 pcim_pin_device(pdev); 430 if (rc) 431 return rc; 432 host->iomap = pcim_iomap_table(pdev); 433 434 #ifdef ATP867X_DEBUG 435 atp867x_check_res(pdev); 436 437 for (i = 0; i < PCI_ROM_RESOURCE; i++) 438 printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i, 439 (unsigned long long)(host->iomap[i])); 440 #endif 441 442 /* 443 * request, iomap BARs and init port addresses accordingly 444 */ 445 for (i = 0; i < host->n_ports; i++) { 446 struct ata_port *ap = host->ports[i]; 447 struct ata_ioports *ioaddr = &ap->ioaddr; 448 449 ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i); 450 ioaddr->ctl_addr = ioaddr->altstatus_addr 451 = ATP867X_IO_ALTSTATUS(ap, i); 452 ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i); 453 454 ata_sff_std_ports(ioaddr); 455 rc = atp867x_set_priv(ap); 456 if (rc) 457 return rc; 458 459 #ifdef ATP867X_DEBUG 460 atp867x_check_ports(ap, i); 461 #endif 462 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", 463 (unsigned long)ioaddr->cmd_addr, 464 (unsigned long)ioaddr->ctl_addr); 465 ata_port_desc(ap, "bmdma 0x%lx", 466 (unsigned long)ioaddr->bmdma_addr); 467 468 mask |= 1 << i; 469 } 470 471 if (!mask) { 472 dev_err(gdev, "no available native port\n"); 473 return -ENODEV; 474 } 475 476 atp867x_fixup(host); 477 478 rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); 479 if (rc) 480 return rc; 481 482 rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); 483 return rc; 484 } 485 486 static int atp867x_init_one(struct pci_dev *pdev, 487 const struct pci_device_id *id) 488 { 489 static const struct ata_port_info info_867x = { 490 .flags = ATA_FLAG_SLAVE_POSS, 491 .pio_mask = ATA_PIO4, 492 .udma_mask = ATA_UDMA6, 493 .port_ops = &atp867x_ops, 494 }; 495 496 struct ata_host *host; 497 const struct ata_port_info *ppi[] = { &info_867x, NULL }; 498 int rc; 499 500 ata_print_version_once(&pdev->dev, DRV_VERSION); 501 502 rc = pcim_enable_device(pdev); 503 if (rc) 504 return rc; 505 506 printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)", 507 pdev->device); 508 509 host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS); 510 if (!host) { 511 dev_err(&pdev->dev, "failed to allocate ATA host\n"); 512 rc = -ENOMEM; 513 goto err_out; 514 } 515 516 rc = atp867x_ata_pci_sff_init_host(host); 517 if (rc) { 518 dev_err(&pdev->dev, "failed to init host\n"); 519 goto err_out; 520 } 521 522 pci_set_master(pdev); 523 524 rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, 525 IRQF_SHARED, &atp867x_sht); 526 if (rc) 527 dev_err(&pdev->dev, "failed to activate host\n"); 528 529 err_out: 530 return rc; 531 } 532 533 #ifdef CONFIG_PM_SLEEP 534 static int atp867x_reinit_one(struct pci_dev *pdev) 535 { 536 struct ata_host *host = pci_get_drvdata(pdev); 537 int rc; 538 539 rc = ata_pci_device_do_resume(pdev); 540 if (rc) 541 return rc; 542 543 atp867x_fixup(host); 544 545 ata_host_resume(host); 546 return 0; 547 } 548 #endif 549 550 static struct pci_device_id atp867x_pci_tbl[] = { 551 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 }, 552 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 }, 553 { }, 554 }; 555 556 static struct pci_driver atp867x_driver = { 557 .name = DRV_NAME, 558 .id_table = atp867x_pci_tbl, 559 .probe = atp867x_init_one, 560 .remove = ata_pci_remove_one, 561 #ifdef CONFIG_PM_SLEEP 562 .suspend = ata_pci_device_suspend, 563 .resume = atp867x_reinit_one, 564 #endif 565 }; 566 567 module_pci_driver(atp867x_driver); 568 569 MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc."); 570 MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller"); 571 MODULE_LICENSE("GPL"); 572 MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl); 573 MODULE_VERSION(DRV_VERSION); 574