1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver 4 * 5 * (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com> 6 * 7 * Per Atp867 data sheet rev 1.2, Acard. 8 * Based in part on early ide code from 9 * 2003-2004 by Eric Uhrhane, Google, Inc. 10 * 11 * TODO: 12 * 1. RAID features [comparison, XOR, striping, mirroring, etc.] 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/pci.h> 18 #include <linux/blkdev.h> 19 #include <linux/delay.h> 20 #include <linux/device.h> 21 #include <linux/gfp.h> 22 #include <scsi/scsi_host.h> 23 #include <linux/libata.h> 24 25 #define DRV_NAME "pata_atp867x" 26 #define DRV_VERSION "0.7.5" 27 28 /* 29 * IO Registers 30 * Note that all runtime hot priv ports are cached in ap private_data 31 */ 32 33 enum { 34 ATP867X_IO_CHANNEL_OFFSET = 0x10, 35 36 /* 37 * IO Register Bitfields 38 */ 39 40 ATP867X_IO_PIOSPD_ACTIVE_SHIFT = 4, 41 ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0, 42 43 ATP867X_IO_DMAMODE_MSTR_SHIFT = 0, 44 ATP867X_IO_DMAMODE_MSTR_MASK = 0x07, 45 ATP867X_IO_DMAMODE_SLAVE_SHIFT = 4, 46 ATP867X_IO_DMAMODE_SLAVE_MASK = 0x70, 47 48 ATP867X_IO_DMAMODE_UDMA_6 = 0x07, 49 ATP867X_IO_DMAMODE_UDMA_5 = 0x06, 50 ATP867X_IO_DMAMODE_UDMA_4 = 0x05, 51 ATP867X_IO_DMAMODE_UDMA_3 = 0x04, 52 ATP867X_IO_DMAMODE_UDMA_2 = 0x03, 53 ATP867X_IO_DMAMODE_UDMA_1 = 0x02, 54 ATP867X_IO_DMAMODE_UDMA_0 = 0x01, 55 ATP867X_IO_DMAMODE_DISABLE = 0x00, 56 57 ATP867X_IO_SYS_INFO_66MHZ = 0x04, 58 ATP867X_IO_SYS_INFO_SLOW_UDMA5 = 0x02, 59 ATP867X_IO_SYS_MASK_RESERVED = (~0xf1), 60 61 ATP867X_IO_PORTSPD_VAL = 0x1143, 62 ATP867X_PREREAD_VAL = 0x0200, 63 64 ATP867X_NUM_PORTS = 4, 65 ATP867X_BAR_IOBASE = 0, 66 ATP867X_BAR_ROMBASE = 6, 67 }; 68 69 #define ATP867X_IOBASE(ap) ((ap)->host->iomap[0]) 70 #define ATP867X_SYS_INFO(ap) (0x3F + ATP867X_IOBASE(ap)) 71 72 #define ATP867X_IO_PORTBASE(ap, port) (0x00 + ATP867X_IOBASE(ap) + \ 73 (port) * ATP867X_IO_CHANNEL_OFFSET) 74 #define ATP867X_IO_DMABASE(ap, port) (0x40 + \ 75 ATP867X_IO_PORTBASE((ap), (port))) 76 77 #define ATP867X_IO_STATUS(ap, port) (0x07 + \ 78 ATP867X_IO_PORTBASE((ap), (port))) 79 #define ATP867X_IO_ALTSTATUS(ap, port) (0x0E + \ 80 ATP867X_IO_PORTBASE((ap), (port))) 81 82 /* 83 * hot priv ports 84 */ 85 #define ATP867X_IO_MSTRPIOSPD(ap, port) (0x08 + \ 86 ATP867X_IO_DMABASE((ap), (port))) 87 #define ATP867X_IO_SLAVPIOSPD(ap, port) (0x09 + \ 88 ATP867X_IO_DMABASE((ap), (port))) 89 #define ATP867X_IO_8BPIOSPD(ap, port) (0x0A + \ 90 ATP867X_IO_DMABASE((ap), (port))) 91 #define ATP867X_IO_DMAMODE(ap, port) (0x0B + \ 92 ATP867X_IO_DMABASE((ap), (port))) 93 94 #define ATP867X_IO_PORTSPD(ap, port) (0x4A + \ 95 ATP867X_IO_PORTBASE((ap), (port))) 96 #define ATP867X_IO_PREREAD(ap, port) (0x4C + \ 97 ATP867X_IO_PORTBASE((ap), (port))) 98 99 struct atp867x_priv { 100 void __iomem *dma_mode; 101 void __iomem *mstr_piospd; 102 void __iomem *slave_piospd; 103 void __iomem *eightb_piospd; 104 int pci66mhz; 105 }; 106 107 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev) 108 { 109 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 110 struct atp867x_priv *dp = ap->private_data; 111 u8 speed = adev->dma_mode; 112 u8 b; 113 u8 mode = speed - XFER_UDMA_0 + 1; 114 115 /* 116 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed 117 * on 66MHz bus 118 * rev-A: UDMA_1~4 (5, 6 no change) 119 * rev-B: all UDMA modes 120 * UDMA_0 stays not to disable UDMA 121 */ 122 if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0 && 123 (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B || 124 mode < ATP867X_IO_DMAMODE_UDMA_5)) 125 mode--; 126 127 b = ioread8(dp->dma_mode); 128 if (adev->devno & 1) { 129 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) | 130 (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT); 131 } else { 132 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) | 133 (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT); 134 } 135 iowrite8(b, dp->dma_mode); 136 } 137 138 static int atp867x_get_active_clocks_shifted(struct ata_port *ap, 139 unsigned int clk) 140 { 141 struct atp867x_priv *dp = ap->private_data; 142 unsigned char clocks = clk; 143 144 /* 145 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed 146 * on 66MHz bus 147 */ 148 if (dp->pci66mhz) 149 clocks++; 150 151 switch (clocks) { 152 case 0: 153 clocks = 1; 154 break; 155 case 1 ... 6: 156 break; 157 default: 158 printk(KERN_WARNING "ATP867X: active %dclk is invalid. " 159 "Using 12clk.\n", clk); 160 fallthrough; 161 case 9 ... 12: 162 clocks = 7; /* 12 clk */ 163 break; 164 case 7: 165 case 8: /* default 8 clk */ 166 clocks = 0; 167 goto active_clock_shift_done; 168 } 169 170 active_clock_shift_done: 171 return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT; 172 } 173 174 static int atp867x_get_recover_clocks_shifted(unsigned int clk) 175 { 176 unsigned char clocks = clk; 177 178 switch (clocks) { 179 case 0: 180 clocks = 1; 181 break; 182 case 1 ... 11: 183 break; 184 case 13: 185 case 14: 186 --clocks; /* by the spec */ 187 break; 188 case 15: 189 break; 190 default: 191 printk(KERN_WARNING "ATP867X: recover %dclk is invalid. " 192 "Using default 12clk.\n", clk); 193 fallthrough; 194 case 12: /* default 12 clk */ 195 clocks = 0; 196 break; 197 } 198 199 return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT; 200 } 201 202 static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev) 203 { 204 struct ata_device *peer = ata_dev_pair(adev); 205 struct atp867x_priv *dp = ap->private_data; 206 u8 speed = adev->pio_mode; 207 struct ata_timing t, p; 208 int T, UT; 209 u8 b; 210 211 T = 1000000000 / 33333; 212 UT = T / 4; 213 214 ata_timing_compute(adev, speed, &t, T, UT); 215 if (peer && peer->pio_mode) { 216 ata_timing_compute(peer, peer->pio_mode, &p, T, UT); 217 ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT); 218 } 219 220 b = ioread8(dp->dma_mode); 221 if (adev->devno & 1) 222 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK); 223 else 224 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK); 225 iowrite8(b, dp->dma_mode); 226 227 b = atp867x_get_active_clocks_shifted(ap, t.active) | 228 atp867x_get_recover_clocks_shifted(t.recover); 229 230 if (adev->devno & 1) 231 iowrite8(b, dp->slave_piospd); 232 else 233 iowrite8(b, dp->mstr_piospd); 234 235 b = atp867x_get_active_clocks_shifted(ap, t.act8b) | 236 atp867x_get_recover_clocks_shifted(t.rec8b); 237 238 iowrite8(b, dp->eightb_piospd); 239 } 240 241 static int atp867x_cable_override(struct pci_dev *pdev) 242 { 243 if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP && 244 (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A || 245 pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) { 246 return 1; 247 } 248 return 0; 249 } 250 251 static int atp867x_cable_detect(struct ata_port *ap) 252 { 253 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 254 255 if (atp867x_cable_override(pdev)) 256 return ATA_CBL_PATA40_SHORT; 257 258 return ATA_CBL_PATA_UNK; 259 } 260 261 static struct scsi_host_template atp867x_sht = { 262 ATA_BMDMA_SHT(DRV_NAME), 263 }; 264 265 static struct ata_port_operations atp867x_ops = { 266 .inherits = &ata_bmdma_port_ops, 267 .cable_detect = atp867x_cable_detect, 268 .set_piomode = atp867x_set_piomode, 269 .set_dmamode = atp867x_set_dmamode, 270 }; 271 272 273 #ifdef ATP867X_DEBUG 274 static void atp867x_check_res(struct pci_dev *pdev) 275 { 276 int i; 277 unsigned long start, len; 278 279 /* Check the PCI resources for this channel are enabled */ 280 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { 281 start = pci_resource_start(pdev, i); 282 len = pci_resource_len(pdev, i); 283 printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n", 284 start, len); 285 } 286 } 287 288 static void atp867x_check_ports(struct ata_port *ap, int port) 289 { 290 struct ata_ioports *ioaddr = &ap->ioaddr; 291 struct atp867x_priv *dp = ap->private_data; 292 293 printk(KERN_DEBUG "ATP867X: port[%d] addresses\n" 294 " cmd_addr =0x%llx, 0x%llx\n" 295 " ctl_addr =0x%llx, 0x%llx\n" 296 " bmdma_addr =0x%llx, 0x%llx\n" 297 " data_addr =0x%llx\n" 298 " error_addr =0x%llx\n" 299 " feature_addr =0x%llx\n" 300 " nsect_addr =0x%llx\n" 301 " lbal_addr =0x%llx\n" 302 " lbam_addr =0x%llx\n" 303 " lbah_addr =0x%llx\n" 304 " device_addr =0x%llx\n" 305 " status_addr =0x%llx\n" 306 " command_addr =0x%llx\n" 307 " dp->dma_mode =0x%llx\n" 308 " dp->mstr_piospd =0x%llx\n" 309 " dp->slave_piospd =0x%llx\n" 310 " dp->eightb_piospd =0x%llx\n" 311 " dp->pci66mhz =0x%lx\n", 312 port, 313 (unsigned long long)ioaddr->cmd_addr, 314 (unsigned long long)ATP867X_IO_PORTBASE(ap, port), 315 (unsigned long long)ioaddr->ctl_addr, 316 (unsigned long long)ATP867X_IO_ALTSTATUS(ap, port), 317 (unsigned long long)ioaddr->bmdma_addr, 318 (unsigned long long)ATP867X_IO_DMABASE(ap, port), 319 (unsigned long long)ioaddr->data_addr, 320 (unsigned long long)ioaddr->error_addr, 321 (unsigned long long)ioaddr->feature_addr, 322 (unsigned long long)ioaddr->nsect_addr, 323 (unsigned long long)ioaddr->lbal_addr, 324 (unsigned long long)ioaddr->lbam_addr, 325 (unsigned long long)ioaddr->lbah_addr, 326 (unsigned long long)ioaddr->device_addr, 327 (unsigned long long)ioaddr->status_addr, 328 (unsigned long long)ioaddr->command_addr, 329 (unsigned long long)dp->dma_mode, 330 (unsigned long long)dp->mstr_piospd, 331 (unsigned long long)dp->slave_piospd, 332 (unsigned long long)dp->eightb_piospd, 333 (unsigned long)dp->pci66mhz); 334 } 335 #endif 336 337 static int atp867x_set_priv(struct ata_port *ap) 338 { 339 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 340 struct atp867x_priv *dp; 341 int port = ap->port_no; 342 343 dp = ap->private_data = 344 devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL); 345 if (dp == NULL) 346 return -ENOMEM; 347 348 dp->dma_mode = ATP867X_IO_DMAMODE(ap, port); 349 dp->mstr_piospd = ATP867X_IO_MSTRPIOSPD(ap, port); 350 dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port); 351 dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port); 352 353 dp->pci66mhz = 354 ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ; 355 356 return 0; 357 } 358 359 static void atp867x_fixup(struct ata_host *host) 360 { 361 struct pci_dev *pdev = to_pci_dev(host->dev); 362 struct ata_port *ap = host->ports[0]; 363 int i; 364 u8 v; 365 366 /* 367 * Broken BIOS might not set latency high enough 368 */ 369 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v); 370 if (v < 0x80) { 371 v = 0x80; 372 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v); 373 printk(KERN_DEBUG "ATP867X: set latency timer of device %s" 374 " to %d\n", pci_name(pdev), v); 375 } 376 377 /* 378 * init 8bit io ports speed(0aaarrrr) to 43h and 379 * init udma modes of master/slave to 0/0(11h) 380 */ 381 for (i = 0; i < ATP867X_NUM_PORTS; i++) 382 iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i)); 383 384 /* 385 * init PreREAD counts 386 */ 387 for (i = 0; i < ATP867X_NUM_PORTS; i++) 388 iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i)); 389 390 v = ioread8(ATP867X_IOBASE(ap) + 0x28); 391 v &= 0xcf; /* Enable INTA#: bit4=0 means enable */ 392 v |= 0xc0; /* Enable PCI burst, MRM & not immediate interrupts */ 393 iowrite8(v, ATP867X_IOBASE(ap) + 0x28); 394 395 /* 396 * Turn off the over clocked udma5 mode, only for Rev-B 397 */ 398 v = ioread8(ATP867X_SYS_INFO(ap)); 399 v &= ATP867X_IO_SYS_MASK_RESERVED; 400 if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B) 401 v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5; 402 iowrite8(v, ATP867X_SYS_INFO(ap)); 403 } 404 405 static int atp867x_ata_pci_sff_init_host(struct ata_host *host) 406 { 407 struct device *gdev = host->dev; 408 struct pci_dev *pdev = to_pci_dev(gdev); 409 unsigned int mask = 0; 410 int i, rc; 411 412 /* 413 * do not map rombase 414 */ 415 rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME); 416 if (rc == -EBUSY) 417 pcim_pin_device(pdev); 418 if (rc) 419 return rc; 420 host->iomap = pcim_iomap_table(pdev); 421 422 #ifdef ATP867X_DEBUG 423 atp867x_check_res(pdev); 424 425 for (i = 0; i < PCI_STD_NUM_BARS; i++) 426 printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i, 427 (unsigned long long)(host->iomap[i])); 428 #endif 429 430 /* 431 * request, iomap BARs and init port addresses accordingly 432 */ 433 for (i = 0; i < host->n_ports; i++) { 434 struct ata_port *ap = host->ports[i]; 435 struct ata_ioports *ioaddr = &ap->ioaddr; 436 437 ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i); 438 ioaddr->ctl_addr = ioaddr->altstatus_addr 439 = ATP867X_IO_ALTSTATUS(ap, i); 440 ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i); 441 442 ata_sff_std_ports(ioaddr); 443 rc = atp867x_set_priv(ap); 444 if (rc) 445 return rc; 446 447 #ifdef ATP867X_DEBUG 448 atp867x_check_ports(ap, i); 449 #endif 450 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", 451 (unsigned long)ioaddr->cmd_addr, 452 (unsigned long)ioaddr->ctl_addr); 453 ata_port_desc(ap, "bmdma 0x%lx", 454 (unsigned long)ioaddr->bmdma_addr); 455 456 mask |= 1 << i; 457 } 458 459 if (!mask) { 460 dev_err(gdev, "no available native port\n"); 461 return -ENODEV; 462 } 463 464 atp867x_fixup(host); 465 466 return dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK); 467 } 468 469 static int atp867x_init_one(struct pci_dev *pdev, 470 const struct pci_device_id *id) 471 { 472 static const struct ata_port_info info_867x = { 473 .flags = ATA_FLAG_SLAVE_POSS, 474 .pio_mask = ATA_PIO4, 475 .udma_mask = ATA_UDMA6, 476 .port_ops = &atp867x_ops, 477 }; 478 479 struct ata_host *host; 480 const struct ata_port_info *ppi[] = { &info_867x, NULL }; 481 int rc; 482 483 ata_print_version_once(&pdev->dev, DRV_VERSION); 484 485 rc = pcim_enable_device(pdev); 486 if (rc) 487 return rc; 488 489 printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)", 490 pdev->device); 491 492 host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS); 493 if (!host) { 494 dev_err(&pdev->dev, "failed to allocate ATA host\n"); 495 rc = -ENOMEM; 496 goto err_out; 497 } 498 499 rc = atp867x_ata_pci_sff_init_host(host); 500 if (rc) { 501 dev_err(&pdev->dev, "failed to init host\n"); 502 goto err_out; 503 } 504 505 pci_set_master(pdev); 506 507 rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, 508 IRQF_SHARED, &atp867x_sht); 509 if (rc) 510 dev_err(&pdev->dev, "failed to activate host\n"); 511 512 err_out: 513 return rc; 514 } 515 516 #ifdef CONFIG_PM_SLEEP 517 static int atp867x_reinit_one(struct pci_dev *pdev) 518 { 519 struct ata_host *host = pci_get_drvdata(pdev); 520 int rc; 521 522 rc = ata_pci_device_do_resume(pdev); 523 if (rc) 524 return rc; 525 526 atp867x_fixup(host); 527 528 ata_host_resume(host); 529 return 0; 530 } 531 #endif 532 533 static struct pci_device_id atp867x_pci_tbl[] = { 534 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 }, 535 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 }, 536 { }, 537 }; 538 539 static struct pci_driver atp867x_driver = { 540 .name = DRV_NAME, 541 .id_table = atp867x_pci_tbl, 542 .probe = atp867x_init_one, 543 .remove = ata_pci_remove_one, 544 #ifdef CONFIG_PM_SLEEP 545 .suspend = ata_pci_device_suspend, 546 .resume = atp867x_reinit_one, 547 #endif 548 }; 549 550 module_pci_driver(atp867x_driver); 551 552 MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc."); 553 MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller"); 554 MODULE_LICENSE("GPL"); 555 MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl); 556 MODULE_VERSION(DRV_VERSION); 557