1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * pata_atiixp.c - ATI PATA for new ATA layer 4 * (C) 2005 Red Hat Inc 5 * (C) 2009-2010 Bartlomiej Zolnierkiewicz 6 * 7 * Based on 8 * 9 * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004 10 * 11 * Copyright (C) 2003 ATI Inc. <hyu@ati.com> 12 * Copyright (C) 2004 Bartlomiej Zolnierkiewicz 13 * 14 */ 15 16 #include <linux/kernel.h> 17 #include <linux/module.h> 18 #include <linux/pci.h> 19 #include <linux/blkdev.h> 20 #include <linux/delay.h> 21 #include <scsi/scsi_host.h> 22 #include <linux/libata.h> 23 #include <linux/dmi.h> 24 25 #define DRV_NAME "pata_atiixp" 26 #define DRV_VERSION "0.4.6" 27 28 enum { 29 ATIIXP_IDE_PIO_TIMING = 0x40, 30 ATIIXP_IDE_MWDMA_TIMING = 0x44, 31 ATIIXP_IDE_PIO_CONTROL = 0x48, 32 ATIIXP_IDE_PIO_MODE = 0x4a, 33 ATIIXP_IDE_UDMA_CONTROL = 0x54, 34 ATIIXP_IDE_UDMA_MODE = 0x56 35 }; 36 37 static const struct dmi_system_id attixp_cable_override_dmi_table[] = { 38 { 39 /* Board has onboard PATA<->SATA converters */ 40 .ident = "MSI E350DM-E33", 41 .matches = { 42 DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), 43 DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"), 44 }, 45 }, 46 { } 47 }; 48 49 static int atiixp_cable_detect(struct ata_port *ap) 50 { 51 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 52 u8 udma; 53 54 if (dmi_check_system(attixp_cable_override_dmi_table)) 55 return ATA_CBL_PATA40_SHORT; 56 57 /* Hack from drivers/ide/pci. Really we want to know how to do the 58 raw detection not play follow the bios mode guess */ 59 pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); 60 if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40) 61 return ATA_CBL_PATA80; 62 return ATA_CBL_PATA40; 63 } 64 65 static DEFINE_SPINLOCK(atiixp_lock); 66 67 /** 68 * atiixp_prereset - perform reset handling 69 * @link: ATA link 70 * @deadline: deadline jiffies for the operation 71 * 72 * Reset sequence checking enable bits to see which ports are 73 * active. 74 */ 75 76 static int atiixp_prereset(struct ata_link *link, unsigned long deadline) 77 { 78 static const struct pci_bits atiixp_enable_bits[] = { 79 { 0x48, 1, 0x01, 0x00 }, 80 { 0x48, 1, 0x08, 0x00 } 81 }; 82 83 struct ata_port *ap = link->ap; 84 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 85 86 if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) 87 return -ENOENT; 88 89 return ata_sff_prereset(link, deadline); 90 } 91 92 /** 93 * atiixp_set_pio_timing - set initial PIO mode data 94 * @ap: ATA interface 95 * @adev: ATA device 96 * @pio: Requested PIO 97 * 98 * Called by both the pio and dma setup functions to set the controller 99 * timings for PIO transfers. We must load both the mode number and 100 * timing values into the controller. 101 */ 102 103 static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) 104 { 105 static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 }; 106 107 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 108 int dn = 2 * ap->port_no + adev->devno; 109 int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); 110 u32 pio_timing_data; 111 u16 pio_mode_data; 112 113 pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); 114 pio_mode_data &= ~(0x7 << (4 * dn)); 115 pio_mode_data |= pio << (4 * dn); 116 pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data); 117 118 pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); 119 pio_timing_data &= ~(0xFF << timing_shift); 120 pio_timing_data |= (pio_timings[pio] << timing_shift); 121 pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); 122 } 123 124 /** 125 * atiixp_set_piomode - set initial PIO mode data 126 * @ap: ATA interface 127 * @adev: ATA device 128 * 129 * Called to do the PIO mode setup. We use a shared helper for this 130 * as the DMA setup must also adjust the PIO timing information. 131 */ 132 133 static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) 134 { 135 unsigned long flags; 136 spin_lock_irqsave(&atiixp_lock, flags); 137 atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); 138 spin_unlock_irqrestore(&atiixp_lock, flags); 139 } 140 141 /** 142 * atiixp_set_dmamode - set initial DMA mode data 143 * @ap: ATA interface 144 * @adev: ATA device 145 * 146 * Called to do the DMA mode setup. We use timing tables for most 147 * modes but must tune an appropriate PIO mode to match. 148 */ 149 150 static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) 151 { 152 static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 }; 153 154 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 155 int dma = adev->dma_mode; 156 int dn = 2 * ap->port_no + adev->devno; 157 int wanted_pio; 158 unsigned long flags; 159 160 spin_lock_irqsave(&atiixp_lock, flags); 161 162 if (adev->dma_mode >= XFER_UDMA_0) { 163 u16 udma_mode_data; 164 165 dma -= XFER_UDMA_0; 166 167 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data); 168 udma_mode_data &= ~(0x7 << (4 * dn)); 169 udma_mode_data |= dma << (4 * dn); 170 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data); 171 } else { 172 int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); 173 u32 mwdma_timing_data; 174 175 dma -= XFER_MW_DMA_0; 176 177 pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING, 178 &mwdma_timing_data); 179 mwdma_timing_data &= ~(0xFF << timing_shift); 180 mwdma_timing_data |= (mwdma_timings[dma] << timing_shift); 181 pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING, 182 mwdma_timing_data); 183 } 184 /* 185 * We must now look at the PIO mode situation. We may need to 186 * adjust the PIO mode to keep the timings acceptable 187 */ 188 if (adev->dma_mode >= XFER_MW_DMA_2) 189 wanted_pio = 4; 190 else if (adev->dma_mode == XFER_MW_DMA_1) 191 wanted_pio = 3; 192 else if (adev->dma_mode == XFER_MW_DMA_0) 193 wanted_pio = 0; 194 else BUG(); 195 196 if (adev->pio_mode != wanted_pio) 197 atiixp_set_pio_timing(ap, adev, wanted_pio); 198 spin_unlock_irqrestore(&atiixp_lock, flags); 199 } 200 201 /** 202 * atiixp_bmdma_start - DMA start callback 203 * @qc: Command in progress 204 * 205 * When DMA begins we need to ensure that the UDMA control 206 * register for the channel is correctly set. 207 * 208 * Note: The host lock held by the libata layer protects 209 * us from two channels both trying to set DMA bits at once 210 */ 211 212 static void atiixp_bmdma_start(struct ata_queued_cmd *qc) 213 { 214 struct ata_port *ap = qc->ap; 215 struct ata_device *adev = qc->dev; 216 217 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 218 int dn = (2 * ap->port_no) + adev->devno; 219 u16 tmp16; 220 221 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); 222 if (ata_using_udma(adev)) 223 tmp16 |= (1 << dn); 224 else 225 tmp16 &= ~(1 << dn); 226 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); 227 ata_bmdma_start(qc); 228 } 229 230 /** 231 * atiixp_bmdma_stop - DMA stop callback 232 * @qc: Command in progress 233 * 234 * DMA has completed. Clear the UDMA flag as the next operations will 235 * be PIO ones not UDMA data transfer. 236 * 237 * Note: The host lock held by the libata layer protects 238 * us from two channels both trying to set DMA bits at once 239 */ 240 241 static void atiixp_bmdma_stop(struct ata_queued_cmd *qc) 242 { 243 struct ata_port *ap = qc->ap; 244 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 245 int dn = (2 * ap->port_no) + qc->dev->devno; 246 u16 tmp16; 247 248 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); 249 tmp16 &= ~(1 << dn); 250 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); 251 ata_bmdma_stop(qc); 252 } 253 254 static struct scsi_host_template atiixp_sht = { 255 ATA_BMDMA_SHT(DRV_NAME), 256 .sg_tablesize = LIBATA_DUMB_MAX_PRD, 257 }; 258 259 static struct ata_port_operations atiixp_port_ops = { 260 .inherits = &ata_bmdma_port_ops, 261 262 .qc_prep = ata_bmdma_dumb_qc_prep, 263 .bmdma_start = atiixp_bmdma_start, 264 .bmdma_stop = atiixp_bmdma_stop, 265 266 .prereset = atiixp_prereset, 267 .cable_detect = atiixp_cable_detect, 268 .set_piomode = atiixp_set_piomode, 269 .set_dmamode = atiixp_set_dmamode, 270 }; 271 272 static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) 273 { 274 static const struct ata_port_info info = { 275 .flags = ATA_FLAG_SLAVE_POSS, 276 .pio_mask = ATA_PIO4, 277 .mwdma_mask = ATA_MWDMA12_ONLY, 278 .udma_mask = ATA_UDMA5, 279 .port_ops = &atiixp_port_ops 280 }; 281 const struct ata_port_info *ppi[] = { &info, &info }; 282 283 /* SB600 doesn't have secondary port wired */ 284 if (pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE) 285 ppi[1] = &ata_dummy_port_info; 286 287 return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL, 288 ATA_HOST_PARALLEL_SCAN); 289 } 290 291 static const struct pci_device_id atiixp[] = { 292 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), }, 293 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), }, 294 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, 295 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, 296 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), }, 297 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), }, 298 299 { }, 300 }; 301 302 static struct pci_driver atiixp_pci_driver = { 303 .name = DRV_NAME, 304 .id_table = atiixp, 305 .probe = atiixp_init_one, 306 .remove = ata_pci_remove_one, 307 #ifdef CONFIG_PM_SLEEP 308 .resume = ata_pci_device_resume, 309 .suspend = ata_pci_device_suspend, 310 #endif 311 }; 312 313 module_pci_driver(atiixp_pci_driver); 314 315 MODULE_AUTHOR("Alan Cox"); 316 MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400"); 317 MODULE_LICENSE("GPL"); 318 MODULE_DEVICE_TABLE(pci, atiixp); 319 MODULE_VERSION(DRV_VERSION); 320