1 /* 2 * pata_atiixp.c - ATI PATA for new ATA layer 3 * (C) 2005 Red Hat Inc 4 * (C) 2009-2010 Bartlomiej Zolnierkiewicz 5 * 6 * Based on 7 * 8 * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004 9 * 10 * Copyright (C) 2003 ATI Inc. <hyu@ati.com> 11 * Copyright (C) 2004 Bartlomiej Zolnierkiewicz 12 * 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/pci.h> 18 #include <linux/init.h> 19 #include <linux/blkdev.h> 20 #include <linux/delay.h> 21 #include <scsi/scsi_host.h> 22 #include <linux/libata.h> 23 #include <linux/dmi.h> 24 25 #define DRV_NAME "pata_atiixp" 26 #define DRV_VERSION "0.4.6" 27 28 enum { 29 ATIIXP_IDE_PIO_TIMING = 0x40, 30 ATIIXP_IDE_MWDMA_TIMING = 0x44, 31 ATIIXP_IDE_PIO_CONTROL = 0x48, 32 ATIIXP_IDE_PIO_MODE = 0x4a, 33 ATIIXP_IDE_UDMA_CONTROL = 0x54, 34 ATIIXP_IDE_UDMA_MODE = 0x56 35 }; 36 37 static const struct dmi_system_id attixp_cable_override_dmi_table[] = { 38 { 39 /* Board has onboard PATA<->SATA converters */ 40 .ident = "MSI E350DM-E33", 41 .matches = { 42 DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), 43 DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"), 44 }, 45 }, 46 { } 47 }; 48 49 static int atiixp_cable_detect(struct ata_port *ap) 50 { 51 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 52 u8 udma; 53 54 if (dmi_check_system(attixp_cable_override_dmi_table)) 55 return ATA_CBL_PATA40_SHORT; 56 57 /* Hack from drivers/ide/pci. Really we want to know how to do the 58 raw detection not play follow the bios mode guess */ 59 pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); 60 if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40) 61 return ATA_CBL_PATA80; 62 return ATA_CBL_PATA40; 63 } 64 65 static DEFINE_SPINLOCK(atiixp_lock); 66 67 /** 68 * atiixp_prereset - perform reset handling 69 * @link: ATA link 70 * @deadline: deadline jiffies for the operation 71 * 72 * Reset sequence checking enable bits to see which ports are 73 * active. 74 */ 75 76 static int atiixp_prereset(struct ata_link *link, unsigned long deadline) 77 { 78 static const struct pci_bits atiixp_enable_bits[] = { 79 { 0x48, 1, 0x01, 0x00 }, 80 { 0x48, 1, 0x08, 0x00 } 81 }; 82 83 struct ata_port *ap = link->ap; 84 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 85 86 if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) 87 return -ENOENT; 88 89 return ata_sff_prereset(link, deadline); 90 } 91 92 /** 93 * atiixp_set_pio_timing - set initial PIO mode data 94 * @ap: ATA interface 95 * @adev: ATA device 96 * 97 * Called by both the pio and dma setup functions to set the controller 98 * timings for PIO transfers. We must load both the mode number and 99 * timing values into the controller. 100 */ 101 102 static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) 103 { 104 static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 }; 105 106 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 107 int dn = 2 * ap->port_no + adev->devno; 108 int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); 109 u32 pio_timing_data; 110 u16 pio_mode_data; 111 112 pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); 113 pio_mode_data &= ~(0x7 << (4 * dn)); 114 pio_mode_data |= pio << (4 * dn); 115 pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data); 116 117 pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); 118 pio_timing_data &= ~(0xFF << timing_shift); 119 pio_timing_data |= (pio_timings[pio] << timing_shift); 120 pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); 121 } 122 123 /** 124 * atiixp_set_piomode - set initial PIO mode data 125 * @ap: ATA interface 126 * @adev: ATA device 127 * 128 * Called to do the PIO mode setup. We use a shared helper for this 129 * as the DMA setup must also adjust the PIO timing information. 130 */ 131 132 static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) 133 { 134 unsigned long flags; 135 spin_lock_irqsave(&atiixp_lock, flags); 136 atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); 137 spin_unlock_irqrestore(&atiixp_lock, flags); 138 } 139 140 /** 141 * atiixp_set_dmamode - set initial DMA mode data 142 * @ap: ATA interface 143 * @adev: ATA device 144 * 145 * Called to do the DMA mode setup. We use timing tables for most 146 * modes but must tune an appropriate PIO mode to match. 147 */ 148 149 static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) 150 { 151 static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 }; 152 153 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 154 int dma = adev->dma_mode; 155 int dn = 2 * ap->port_no + adev->devno; 156 int wanted_pio; 157 unsigned long flags; 158 159 spin_lock_irqsave(&atiixp_lock, flags); 160 161 if (adev->dma_mode >= XFER_UDMA_0) { 162 u16 udma_mode_data; 163 164 dma -= XFER_UDMA_0; 165 166 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data); 167 udma_mode_data &= ~(0x7 << (4 * dn)); 168 udma_mode_data |= dma << (4 * dn); 169 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data); 170 } else { 171 int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); 172 u32 mwdma_timing_data; 173 174 dma -= XFER_MW_DMA_0; 175 176 pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING, 177 &mwdma_timing_data); 178 mwdma_timing_data &= ~(0xFF << timing_shift); 179 mwdma_timing_data |= (mwdma_timings[dma] << timing_shift); 180 pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING, 181 mwdma_timing_data); 182 } 183 /* 184 * We must now look at the PIO mode situation. We may need to 185 * adjust the PIO mode to keep the timings acceptable 186 */ 187 if (adev->dma_mode >= XFER_MW_DMA_2) 188 wanted_pio = 4; 189 else if (adev->dma_mode == XFER_MW_DMA_1) 190 wanted_pio = 3; 191 else if (adev->dma_mode == XFER_MW_DMA_0) 192 wanted_pio = 0; 193 else BUG(); 194 195 if (adev->pio_mode != wanted_pio) 196 atiixp_set_pio_timing(ap, adev, wanted_pio); 197 spin_unlock_irqrestore(&atiixp_lock, flags); 198 } 199 200 /** 201 * atiixp_bmdma_start - DMA start callback 202 * @qc: Command in progress 203 * 204 * When DMA begins we need to ensure that the UDMA control 205 * register for the channel is correctly set. 206 * 207 * Note: The host lock held by the libata layer protects 208 * us from two channels both trying to set DMA bits at once 209 */ 210 211 static void atiixp_bmdma_start(struct ata_queued_cmd *qc) 212 { 213 struct ata_port *ap = qc->ap; 214 struct ata_device *adev = qc->dev; 215 216 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 217 int dn = (2 * ap->port_no) + adev->devno; 218 u16 tmp16; 219 220 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); 221 if (ata_using_udma(adev)) 222 tmp16 |= (1 << dn); 223 else 224 tmp16 &= ~(1 << dn); 225 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); 226 ata_bmdma_start(qc); 227 } 228 229 /** 230 * atiixp_dma_stop - DMA stop callback 231 * @qc: Command in progress 232 * 233 * DMA has completed. Clear the UDMA flag as the next operations will 234 * be PIO ones not UDMA data transfer. 235 * 236 * Note: The host lock held by the libata layer protects 237 * us from two channels both trying to set DMA bits at once 238 */ 239 240 static void atiixp_bmdma_stop(struct ata_queued_cmd *qc) 241 { 242 struct ata_port *ap = qc->ap; 243 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 244 int dn = (2 * ap->port_no) + qc->dev->devno; 245 u16 tmp16; 246 247 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); 248 tmp16 &= ~(1 << dn); 249 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); 250 ata_bmdma_stop(qc); 251 } 252 253 static struct scsi_host_template atiixp_sht = { 254 ATA_BMDMA_SHT(DRV_NAME), 255 .sg_tablesize = LIBATA_DUMB_MAX_PRD, 256 }; 257 258 static struct ata_port_operations atiixp_port_ops = { 259 .inherits = &ata_bmdma_port_ops, 260 261 .qc_prep = ata_bmdma_dumb_qc_prep, 262 .bmdma_start = atiixp_bmdma_start, 263 .bmdma_stop = atiixp_bmdma_stop, 264 265 .prereset = atiixp_prereset, 266 .cable_detect = atiixp_cable_detect, 267 .set_piomode = atiixp_set_piomode, 268 .set_dmamode = atiixp_set_dmamode, 269 }; 270 271 static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) 272 { 273 static const struct ata_port_info info = { 274 .flags = ATA_FLAG_SLAVE_POSS, 275 .pio_mask = ATA_PIO4, 276 .mwdma_mask = ATA_MWDMA12_ONLY, 277 .udma_mask = ATA_UDMA5, 278 .port_ops = &atiixp_port_ops 279 }; 280 const struct ata_port_info *ppi[] = { &info, &info }; 281 282 return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL, 283 ATA_HOST_PARALLEL_SCAN); 284 } 285 286 static const struct pci_device_id atiixp[] = { 287 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), }, 288 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), }, 289 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, 290 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, 291 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), }, 292 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), }, 293 294 { }, 295 }; 296 297 static struct pci_driver atiixp_pci_driver = { 298 .name = DRV_NAME, 299 .id_table = atiixp, 300 .probe = atiixp_init_one, 301 .remove = ata_pci_remove_one, 302 #ifdef CONFIG_PM 303 .resume = ata_pci_device_resume, 304 .suspend = ata_pci_device_suspend, 305 #endif 306 }; 307 308 module_pci_driver(atiixp_pci_driver); 309 310 MODULE_AUTHOR("Alan Cox"); 311 MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400"); 312 MODULE_LICENSE("GPL"); 313 MODULE_DEVICE_TABLE(pci, atiixp); 314 MODULE_VERSION(DRV_VERSION); 315