1 /* 2 * libata-scsi.c - helper library for ATA 3 * 4 * Maintained by: Jeff Garzik <jgarzik@pobox.com> 5 * Please ALWAYS copy linux-ide@vger.kernel.org 6 * on emails. 7 * 8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved. 9 * Copyright 2003-2004 Jeff Garzik 10 * 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2, or (at your option) 15 * any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; see the file COPYING. If not, write to 24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * 27 * libata documentation is available via 'make {ps|pdf}docs', 28 * as Documentation/DocBook/libata.* 29 * 30 * Hardware documentation available from 31 * - http://www.t10.org/ 32 * - http://www.t13.org/ 33 * 34 */ 35 36 #include <linux/kernel.h> 37 #include <linux/blkdev.h> 38 #include <linux/spinlock.h> 39 #include <scsi/scsi.h> 40 #include <scsi/scsi_host.h> 41 #include <scsi/scsi_cmnd.h> 42 #include <scsi/scsi_eh.h> 43 #include <scsi/scsi_device.h> 44 #include <scsi/scsi_tcq.h> 45 #include <scsi/scsi_transport.h> 46 #include <linux/libata.h> 47 #include <linux/hdreg.h> 48 #include <linux/uaccess.h> 49 50 #include "libata.h" 51 52 #define SECTOR_SIZE 512 53 #define ATA_SCSI_RBUF_SIZE 4096 54 55 static DEFINE_SPINLOCK(ata_scsi_rbuf_lock); 56 static u8 ata_scsi_rbuf[ATA_SCSI_RBUF_SIZE]; 57 58 typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc); 59 60 static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, 61 const struct scsi_device *scsidev); 62 static struct ata_device *ata_scsi_find_dev(struct ata_port *ap, 63 const struct scsi_device *scsidev); 64 static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, 65 unsigned int id, unsigned int lun); 66 67 68 #define RW_RECOVERY_MPAGE 0x1 69 #define RW_RECOVERY_MPAGE_LEN 12 70 #define CACHE_MPAGE 0x8 71 #define CACHE_MPAGE_LEN 20 72 #define CONTROL_MPAGE 0xa 73 #define CONTROL_MPAGE_LEN 12 74 #define ALL_MPAGES 0x3f 75 #define ALL_SUB_MPAGES 0xff 76 77 78 static const u8 def_rw_recovery_mpage[RW_RECOVERY_MPAGE_LEN] = { 79 RW_RECOVERY_MPAGE, 80 RW_RECOVERY_MPAGE_LEN - 2, 81 (1 << 7), /* AWRE */ 82 0, /* read retry count */ 83 0, 0, 0, 0, 84 0, /* write retry count */ 85 0, 0, 0 86 }; 87 88 static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { 89 CACHE_MPAGE, 90 CACHE_MPAGE_LEN - 2, 91 0, /* contains WCE, needs to be 0 for logic */ 92 0, 0, 0, 0, 0, 0, 0, 0, 0, 93 0, /* contains DRA, needs to be 0 for logic */ 94 0, 0, 0, 0, 0, 0, 0 95 }; 96 97 static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { 98 CONTROL_MPAGE, 99 CONTROL_MPAGE_LEN - 2, 100 2, /* DSENSE=0, GLTSD=1 */ 101 0, /* [QAM+QERR may be 1, see 05-359r1] */ 102 0, 0, 0, 0, 0xff, 0xff, 103 0, 30 /* extended self test time, see 05-359r1 */ 104 }; 105 106 /* 107 * libata transport template. libata doesn't do real transport stuff. 108 * It just needs the eh_timed_out hook. 109 */ 110 static struct scsi_transport_template ata_scsi_transport_template = { 111 .eh_strategy_handler = ata_scsi_error, 112 .eh_timed_out = ata_scsi_timed_out, 113 .user_scan = ata_scsi_user_scan, 114 }; 115 116 117 static const struct { 118 enum link_pm value; 119 const char *name; 120 } link_pm_policy[] = { 121 { NOT_AVAILABLE, "max_performance" }, 122 { MIN_POWER, "min_power" }, 123 { MAX_PERFORMANCE, "max_performance" }, 124 { MEDIUM_POWER, "medium_power" }, 125 }; 126 127 static const char *ata_scsi_lpm_get(enum link_pm policy) 128 { 129 int i; 130 131 for (i = 0; i < ARRAY_SIZE(link_pm_policy); i++) 132 if (link_pm_policy[i].value == policy) 133 return link_pm_policy[i].name; 134 135 return NULL; 136 } 137 138 static ssize_t ata_scsi_lpm_put(struct device *dev, 139 struct device_attribute *attr, 140 const char *buf, size_t count) 141 { 142 struct Scsi_Host *shost = class_to_shost(dev); 143 struct ata_port *ap = ata_shost_to_port(shost); 144 enum link_pm policy = 0; 145 int i; 146 147 /* 148 * we are skipping array location 0 on purpose - this 149 * is because a value of NOT_AVAILABLE is displayed 150 * to the user as max_performance, but when the user 151 * writes "max_performance", they actually want the 152 * value to match MAX_PERFORMANCE. 153 */ 154 for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) { 155 const int len = strlen(link_pm_policy[i].name); 156 if (strncmp(link_pm_policy[i].name, buf, len) == 0 && 157 buf[len] == '\n') { 158 policy = link_pm_policy[i].value; 159 break; 160 } 161 } 162 if (!policy) 163 return -EINVAL; 164 165 ata_lpm_schedule(ap, policy); 166 return count; 167 } 168 169 static ssize_t 170 ata_scsi_lpm_show(struct device *dev, struct device_attribute *attr, char *buf) 171 { 172 struct Scsi_Host *shost = class_to_shost(dev); 173 struct ata_port *ap = ata_shost_to_port(shost); 174 const char *policy = 175 ata_scsi_lpm_get(ap->pm_policy); 176 177 if (!policy) 178 return -EINVAL; 179 180 return snprintf(buf, 23, "%s\n", policy); 181 } 182 DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, 183 ata_scsi_lpm_show, ata_scsi_lpm_put); 184 EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); 185 186 static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) 187 { 188 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; 189 190 scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq); 191 } 192 193 static ssize_t 194 ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr, 195 const char *buf, size_t count) 196 { 197 struct Scsi_Host *shost = class_to_shost(dev); 198 struct ata_port *ap = ata_shost_to_port(shost); 199 if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM)) 200 return ap->ops->em_store(ap, buf, count); 201 return -EINVAL; 202 } 203 204 static ssize_t 205 ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, 206 char *buf) 207 { 208 struct Scsi_Host *shost = class_to_shost(dev); 209 struct ata_port *ap = ata_shost_to_port(shost); 210 211 if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM)) 212 return ap->ops->em_show(ap, buf); 213 return -EINVAL; 214 } 215 DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO, 216 ata_scsi_em_message_show, ata_scsi_em_message_store); 217 EXPORT_SYMBOL_GPL(dev_attr_em_message); 218 219 static ssize_t 220 ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr, 221 char *buf) 222 { 223 struct Scsi_Host *shost = class_to_shost(dev); 224 struct ata_port *ap = ata_shost_to_port(shost); 225 226 return snprintf(buf, 23, "%d\n", ap->em_message_type); 227 } 228 DEVICE_ATTR(em_message_type, S_IRUGO, 229 ata_scsi_em_message_type_show, NULL); 230 EXPORT_SYMBOL_GPL(dev_attr_em_message_type); 231 232 static ssize_t 233 ata_scsi_activity_show(struct device *dev, struct device_attribute *attr, 234 char *buf) 235 { 236 struct scsi_device *sdev = to_scsi_device(dev); 237 struct ata_port *ap = ata_shost_to_port(sdev->host); 238 struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); 239 240 if (ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY)) 241 return ap->ops->sw_activity_show(atadev, buf); 242 return -EINVAL; 243 } 244 245 static ssize_t 246 ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, 247 const char *buf, size_t count) 248 { 249 struct scsi_device *sdev = to_scsi_device(dev); 250 struct ata_port *ap = ata_shost_to_port(sdev->host); 251 struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); 252 enum sw_activity val; 253 int rc; 254 255 if (ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) { 256 val = simple_strtoul(buf, NULL, 0); 257 switch (val) { 258 case OFF: case BLINK_ON: case BLINK_OFF: 259 rc = ap->ops->sw_activity_store(atadev, val); 260 if (!rc) 261 return count; 262 else 263 return rc; 264 } 265 } 266 return -EINVAL; 267 } 268 DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show, 269 ata_scsi_activity_store); 270 EXPORT_SYMBOL_GPL(dev_attr_sw_activity); 271 272 static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, 273 void (*done)(struct scsi_cmnd *)) 274 { 275 ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); 276 /* "Invalid field in cbd" */ 277 done(cmd); 278 } 279 280 /** 281 * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. 282 * @sdev: SCSI device for which BIOS geometry is to be determined 283 * @bdev: block device associated with @sdev 284 * @capacity: capacity of SCSI device 285 * @geom: location to which geometry will be output 286 * 287 * Generic bios head/sector/cylinder calculator 288 * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS) 289 * mapping. Some situations may arise where the disk is not 290 * bootable if this is not used. 291 * 292 * LOCKING: 293 * Defined by the SCSI layer. We don't really care. 294 * 295 * RETURNS: 296 * Zero. 297 */ 298 int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, 299 sector_t capacity, int geom[]) 300 { 301 geom[0] = 255; 302 geom[1] = 63; 303 sector_div(capacity, 255*63); 304 geom[2] = capacity; 305 306 return 0; 307 } 308 309 /** 310 * ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl 311 * @sdev: SCSI device to get identify data for 312 * @arg: User buffer area for identify data 313 * 314 * LOCKING: 315 * Defined by the SCSI layer. We don't really care. 316 * 317 * RETURNS: 318 * Zero on success, negative errno on error. 319 */ 320 static int ata_get_identity(struct scsi_device *sdev, void __user *arg) 321 { 322 struct ata_port *ap = ata_shost_to_port(sdev->host); 323 struct ata_device *dev = ata_scsi_find_dev(ap, sdev); 324 u16 __user *dst = arg; 325 char buf[40]; 326 327 if (!dev) 328 return -ENOMSG; 329 330 if (copy_to_user(dst, dev->id, ATA_ID_WORDS * sizeof(u16))) 331 return -EFAULT; 332 333 ata_id_string(dev->id, buf, ATA_ID_PROD, ATA_ID_PROD_LEN); 334 if (copy_to_user(dst + ATA_ID_PROD, buf, ATA_ID_PROD_LEN)) 335 return -EFAULT; 336 337 ata_id_string(dev->id, buf, ATA_ID_FW_REV, ATA_ID_FW_REV_LEN); 338 if (copy_to_user(dst + ATA_ID_FW_REV, buf, ATA_ID_FW_REV_LEN)) 339 return -EFAULT; 340 341 ata_id_string(dev->id, buf, ATA_ID_SERNO, ATA_ID_SERNO_LEN); 342 if (copy_to_user(dst + ATA_ID_SERNO, buf, ATA_ID_SERNO_LEN)) 343 return -EFAULT; 344 345 return 0; 346 } 347 348 /** 349 * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl 350 * @scsidev: Device to which we are issuing command 351 * @arg: User provided data for issuing command 352 * 353 * LOCKING: 354 * Defined by the SCSI layer. We don't really care. 355 * 356 * RETURNS: 357 * Zero on success, negative errno on error. 358 */ 359 int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) 360 { 361 int rc = 0; 362 u8 scsi_cmd[MAX_COMMAND_SIZE]; 363 u8 args[4], *argbuf = NULL, *sensebuf = NULL; 364 int argsize = 0; 365 enum dma_data_direction data_dir; 366 int cmd_result; 367 368 if (arg == NULL) 369 return -EINVAL; 370 371 if (copy_from_user(args, arg, sizeof(args))) 372 return -EFAULT; 373 374 sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); 375 if (!sensebuf) 376 return -ENOMEM; 377 378 memset(scsi_cmd, 0, sizeof(scsi_cmd)); 379 380 if (args[3]) { 381 argsize = SECTOR_SIZE * args[3]; 382 argbuf = kmalloc(argsize, GFP_KERNEL); 383 if (argbuf == NULL) { 384 rc = -ENOMEM; 385 goto error; 386 } 387 388 scsi_cmd[1] = (4 << 1); /* PIO Data-in */ 389 scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, 390 block count in sector count field */ 391 data_dir = DMA_FROM_DEVICE; 392 } else { 393 scsi_cmd[1] = (3 << 1); /* Non-data */ 394 scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */ 395 data_dir = DMA_NONE; 396 } 397 398 scsi_cmd[0] = ATA_16; 399 400 scsi_cmd[4] = args[2]; 401 if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */ 402 scsi_cmd[6] = args[3]; 403 scsi_cmd[8] = args[1]; 404 scsi_cmd[10] = 0x4f; 405 scsi_cmd[12] = 0xc2; 406 } else { 407 scsi_cmd[6] = args[1]; 408 } 409 scsi_cmd[14] = args[0]; 410 411 /* Good values for timeout and retries? Values below 412 from scsi_ioctl_send_command() for default case... */ 413 cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize, 414 sensebuf, (10*HZ), 5, 0); 415 416 if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ 417 u8 *desc = sensebuf + 8; 418 cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */ 419 420 /* If we set cc then ATA pass-through will cause a 421 * check condition even if no error. Filter that. */ 422 if (cmd_result & SAM_STAT_CHECK_CONDITION) { 423 struct scsi_sense_hdr sshdr; 424 scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, 425 &sshdr); 426 if (sshdr.sense_key == 0 && 427 sshdr.asc == 0 && sshdr.ascq == 0) 428 cmd_result &= ~SAM_STAT_CHECK_CONDITION; 429 } 430 431 /* Send userspace a few ATA registers (same as drivers/ide) */ 432 if (sensebuf[0] == 0x72 && /* format is "descriptor" */ 433 desc[0] == 0x09) { /* code is "ATA Descriptor" */ 434 args[0] = desc[13]; /* status */ 435 args[1] = desc[3]; /* error */ 436 args[2] = desc[5]; /* sector count (0:7) */ 437 if (copy_to_user(arg, args, sizeof(args))) 438 rc = -EFAULT; 439 } 440 } 441 442 443 if (cmd_result) { 444 rc = -EIO; 445 goto error; 446 } 447 448 if ((argbuf) 449 && copy_to_user(arg + sizeof(args), argbuf, argsize)) 450 rc = -EFAULT; 451 error: 452 kfree(sensebuf); 453 kfree(argbuf); 454 return rc; 455 } 456 457 /** 458 * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl 459 * @scsidev: Device to which we are issuing command 460 * @arg: User provided data for issuing command 461 * 462 * LOCKING: 463 * Defined by the SCSI layer. We don't really care. 464 * 465 * RETURNS: 466 * Zero on success, negative errno on error. 467 */ 468 int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) 469 { 470 int rc = 0; 471 u8 scsi_cmd[MAX_COMMAND_SIZE]; 472 u8 args[7], *sensebuf = NULL; 473 int cmd_result; 474 475 if (arg == NULL) 476 return -EINVAL; 477 478 if (copy_from_user(args, arg, sizeof(args))) 479 return -EFAULT; 480 481 sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); 482 if (!sensebuf) 483 return -ENOMEM; 484 485 memset(scsi_cmd, 0, sizeof(scsi_cmd)); 486 scsi_cmd[0] = ATA_16; 487 scsi_cmd[1] = (3 << 1); /* Non-data */ 488 scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */ 489 scsi_cmd[4] = args[1]; 490 scsi_cmd[6] = args[2]; 491 scsi_cmd[8] = args[3]; 492 scsi_cmd[10] = args[4]; 493 scsi_cmd[12] = args[5]; 494 scsi_cmd[13] = args[6] & 0x4f; 495 scsi_cmd[14] = args[0]; 496 497 /* Good values for timeout and retries? Values below 498 from scsi_ioctl_send_command() for default case... */ 499 cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0, 500 sensebuf, (10*HZ), 5, 0); 501 502 if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ 503 u8 *desc = sensebuf + 8; 504 cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */ 505 506 /* If we set cc then ATA pass-through will cause a 507 * check condition even if no error. Filter that. */ 508 if (cmd_result & SAM_STAT_CHECK_CONDITION) { 509 struct scsi_sense_hdr sshdr; 510 scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, 511 &sshdr); 512 if (sshdr.sense_key == 0 && 513 sshdr.asc == 0 && sshdr.ascq == 0) 514 cmd_result &= ~SAM_STAT_CHECK_CONDITION; 515 } 516 517 /* Send userspace ATA registers */ 518 if (sensebuf[0] == 0x72 && /* format is "descriptor" */ 519 desc[0] == 0x09) {/* code is "ATA Descriptor" */ 520 args[0] = desc[13]; /* status */ 521 args[1] = desc[3]; /* error */ 522 args[2] = desc[5]; /* sector count (0:7) */ 523 args[3] = desc[7]; /* lbal */ 524 args[4] = desc[9]; /* lbam */ 525 args[5] = desc[11]; /* lbah */ 526 args[6] = desc[12]; /* select */ 527 if (copy_to_user(arg, args, sizeof(args))) 528 rc = -EFAULT; 529 } 530 } 531 532 if (cmd_result) { 533 rc = -EIO; 534 goto error; 535 } 536 537 error: 538 kfree(sensebuf); 539 return rc; 540 } 541 542 int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) 543 { 544 int val = -EINVAL, rc = -EINVAL; 545 546 switch (cmd) { 547 case ATA_IOC_GET_IO32: 548 val = 0; 549 if (copy_to_user(arg, &val, 1)) 550 return -EFAULT; 551 return 0; 552 553 case ATA_IOC_SET_IO32: 554 val = (unsigned long) arg; 555 if (val != 0) 556 return -EINVAL; 557 return 0; 558 559 case HDIO_GET_IDENTITY: 560 return ata_get_identity(scsidev, arg); 561 562 case HDIO_DRIVE_CMD: 563 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) 564 return -EACCES; 565 return ata_cmd_ioctl(scsidev, arg); 566 567 case HDIO_DRIVE_TASK: 568 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) 569 return -EACCES; 570 return ata_task_ioctl(scsidev, arg); 571 572 default: 573 rc = -ENOTTY; 574 break; 575 } 576 577 return rc; 578 } 579 580 /** 581 * ata_scsi_qc_new - acquire new ata_queued_cmd reference 582 * @dev: ATA device to which the new command is attached 583 * @cmd: SCSI command that originated this ATA command 584 * @done: SCSI command completion function 585 * 586 * Obtain a reference to an unused ata_queued_cmd structure, 587 * which is the basic libata structure representing a single 588 * ATA command sent to the hardware. 589 * 590 * If a command was available, fill in the SCSI-specific 591 * portions of the structure with information on the 592 * current command. 593 * 594 * LOCKING: 595 * spin_lock_irqsave(host lock) 596 * 597 * RETURNS: 598 * Command allocated, or %NULL if none available. 599 */ 600 static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, 601 struct scsi_cmnd *cmd, 602 void (*done)(struct scsi_cmnd *)) 603 { 604 struct ata_queued_cmd *qc; 605 606 qc = ata_qc_new_init(dev); 607 if (qc) { 608 qc->scsicmd = cmd; 609 qc->scsidone = done; 610 611 qc->sg = scsi_sglist(cmd); 612 qc->n_elem = scsi_sg_count(cmd); 613 } else { 614 cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); 615 done(cmd); 616 } 617 618 return qc; 619 } 620 621 static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc) 622 { 623 struct scsi_cmnd *scmd = qc->scsicmd; 624 625 qc->extrabytes = scmd->request->extra_len; 626 qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes; 627 } 628 629 /** 630 * ata_dump_status - user friendly display of error info 631 * @id: id of the port in question 632 * @tf: ptr to filled out taskfile 633 * 634 * Decode and dump the ATA error/status registers for the user so 635 * that they have some idea what really happened at the non 636 * make-believe layer. 637 * 638 * LOCKING: 639 * inherited from caller 640 */ 641 static void ata_dump_status(unsigned id, struct ata_taskfile *tf) 642 { 643 u8 stat = tf->command, err = tf->feature; 644 645 printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); 646 if (stat & ATA_BUSY) { 647 printk("Busy }\n"); /* Data is not valid in this case */ 648 } else { 649 if (stat & 0x40) printk("DriveReady "); 650 if (stat & 0x20) printk("DeviceFault "); 651 if (stat & 0x10) printk("SeekComplete "); 652 if (stat & 0x08) printk("DataRequest "); 653 if (stat & 0x04) printk("CorrectedError "); 654 if (stat & 0x02) printk("Index "); 655 if (stat & 0x01) printk("Error "); 656 printk("}\n"); 657 658 if (err) { 659 printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); 660 if (err & 0x04) printk("DriveStatusError "); 661 if (err & 0x80) { 662 if (err & 0x04) printk("BadCRC "); 663 else printk("Sector "); 664 } 665 if (err & 0x40) printk("UncorrectableError "); 666 if (err & 0x10) printk("SectorIdNotFound "); 667 if (err & 0x02) printk("TrackZeroNotFound "); 668 if (err & 0x01) printk("AddrMarkNotFound "); 669 printk("}\n"); 670 } 671 } 672 } 673 674 /** 675 * ata_to_sense_error - convert ATA error to SCSI error 676 * @id: ATA device number 677 * @drv_stat: value contained in ATA status register 678 * @drv_err: value contained in ATA error register 679 * @sk: the sense key we'll fill out 680 * @asc: the additional sense code we'll fill out 681 * @ascq: the additional sense code qualifier we'll fill out 682 * @verbose: be verbose 683 * 684 * Converts an ATA error into a SCSI error. Fill out pointers to 685 * SK, ASC, and ASCQ bytes for later use in fixed or descriptor 686 * format sense blocks. 687 * 688 * LOCKING: 689 * spin_lock_irqsave(host lock) 690 */ 691 static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, 692 u8 *asc, u8 *ascq, int verbose) 693 { 694 int i; 695 696 /* Based on the 3ware driver translation table */ 697 static const unsigned char sense_table[][4] = { 698 /* BBD|ECC|ID|MAR */ 699 {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command 700 /* BBD|ECC|ID */ 701 {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command 702 /* ECC|MC|MARK */ 703 {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error 704 /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */ 705 {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error 706 /* MC|ID|ABRT|TRK0|MARK */ 707 {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready 708 /* MCR|MARK */ 709 {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready 710 /* Bad address mark */ 711 {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field 712 /* TRK0 */ 713 {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error 714 /* Abort & !ICRC */ 715 {0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command 716 /* Media change request */ 717 {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline 718 /* SRV */ 719 {0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found 720 /* Media change */ 721 {0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline 722 /* ECC */ 723 {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error 724 /* BBD - block marked bad */ 725 {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error 726 {0xFF, 0xFF, 0xFF, 0xFF}, // END mark 727 }; 728 static const unsigned char stat_table[][4] = { 729 /* Must be first because BUSY means no other bits valid */ 730 {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now 731 {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault 732 {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now 733 {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered 734 {0xFF, 0xFF, 0xFF, 0xFF}, // END mark 735 }; 736 737 /* 738 * Is this an error we can process/parse 739 */ 740 if (drv_stat & ATA_BUSY) { 741 drv_err = 0; /* Ignore the err bits, they're invalid */ 742 } 743 744 if (drv_err) { 745 /* Look for drv_err */ 746 for (i = 0; sense_table[i][0] != 0xFF; i++) { 747 /* Look for best matches first */ 748 if ((sense_table[i][0] & drv_err) == 749 sense_table[i][0]) { 750 *sk = sense_table[i][1]; 751 *asc = sense_table[i][2]; 752 *ascq = sense_table[i][3]; 753 goto translate_done; 754 } 755 } 756 /* No immediate match */ 757 if (verbose) 758 printk(KERN_WARNING "ata%u: no sense translation for " 759 "error 0x%02x\n", id, drv_err); 760 } 761 762 /* Fall back to interpreting status bits */ 763 for (i = 0; stat_table[i][0] != 0xFF; i++) { 764 if (stat_table[i][0] & drv_stat) { 765 *sk = stat_table[i][1]; 766 *asc = stat_table[i][2]; 767 *ascq = stat_table[i][3]; 768 goto translate_done; 769 } 770 } 771 /* No error? Undecoded? */ 772 if (verbose) 773 printk(KERN_WARNING "ata%u: no sense translation for " 774 "status: 0x%02x\n", id, drv_stat); 775 776 /* We need a sensible error return here, which is tricky, and one 777 that won't cause people to do things like return a disk wrongly */ 778 *sk = ABORTED_COMMAND; 779 *asc = 0x00; 780 *ascq = 0x00; 781 782 translate_done: 783 if (verbose) 784 printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " 785 "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", 786 id, drv_stat, drv_err, *sk, *asc, *ascq); 787 return; 788 } 789 790 /* 791 * ata_gen_passthru_sense - Generate check condition sense block. 792 * @qc: Command that completed. 793 * 794 * This function is specific to the ATA descriptor format sense 795 * block specified for the ATA pass through commands. Regardless 796 * of whether the command errored or not, return a sense 797 * block. Copy all controller registers into the sense 798 * block. Clear sense key, ASC & ASCQ if there is no error. 799 * 800 * LOCKING: 801 * None. 802 */ 803 static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) 804 { 805 struct scsi_cmnd *cmd = qc->scsicmd; 806 struct ata_taskfile *tf = &qc->result_tf; 807 unsigned char *sb = cmd->sense_buffer; 808 unsigned char *desc = sb + 8; 809 int verbose = qc->ap->ops->error_handler == NULL; 810 811 memset(sb, 0, SCSI_SENSE_BUFFERSIZE); 812 813 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; 814 815 /* 816 * Use ata_to_sense_error() to map status register bits 817 * onto sense key, asc & ascq. 818 */ 819 if (qc->err_mask || 820 tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { 821 ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature, 822 &sb[1], &sb[2], &sb[3], verbose); 823 sb[1] &= 0x0f; 824 } 825 826 /* 827 * Sense data is current and format is descriptor. 828 */ 829 sb[0] = 0x72; 830 831 desc[0] = 0x09; 832 833 /* set length of additional sense data */ 834 sb[7] = 14; 835 desc[1] = 12; 836 837 /* 838 * Copy registers into sense buffer. 839 */ 840 desc[2] = 0x00; 841 desc[3] = tf->feature; /* == error reg */ 842 desc[5] = tf->nsect; 843 desc[7] = tf->lbal; 844 desc[9] = tf->lbam; 845 desc[11] = tf->lbah; 846 desc[12] = tf->device; 847 desc[13] = tf->command; /* == status reg */ 848 849 /* 850 * Fill in Extend bit, and the high order bytes 851 * if applicable. 852 */ 853 if (tf->flags & ATA_TFLAG_LBA48) { 854 desc[2] |= 0x01; 855 desc[4] = tf->hob_nsect; 856 desc[6] = tf->hob_lbal; 857 desc[8] = tf->hob_lbam; 858 desc[10] = tf->hob_lbah; 859 } 860 } 861 862 /** 863 * ata_gen_ata_sense - generate a SCSI fixed sense block 864 * @qc: Command that we are erroring out 865 * 866 * Generate sense block for a failed ATA command @qc. Descriptor 867 * format is used to accomodate LBA48 block address. 868 * 869 * LOCKING: 870 * None. 871 */ 872 static void ata_gen_ata_sense(struct ata_queued_cmd *qc) 873 { 874 struct ata_device *dev = qc->dev; 875 struct scsi_cmnd *cmd = qc->scsicmd; 876 struct ata_taskfile *tf = &qc->result_tf; 877 unsigned char *sb = cmd->sense_buffer; 878 unsigned char *desc = sb + 8; 879 int verbose = qc->ap->ops->error_handler == NULL; 880 u64 block; 881 882 memset(sb, 0, SCSI_SENSE_BUFFERSIZE); 883 884 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; 885 886 /* sense data is current and format is descriptor */ 887 sb[0] = 0x72; 888 889 /* Use ata_to_sense_error() to map status register bits 890 * onto sense key, asc & ascq. 891 */ 892 if (qc->err_mask || 893 tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { 894 ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature, 895 &sb[1], &sb[2], &sb[3], verbose); 896 sb[1] &= 0x0f; 897 } 898 899 block = ata_tf_read_block(&qc->result_tf, dev); 900 901 /* information sense data descriptor */ 902 sb[7] = 12; 903 desc[0] = 0x00; 904 desc[1] = 10; 905 906 desc[2] |= 0x80; /* valid */ 907 desc[6] = block >> 40; 908 desc[7] = block >> 32; 909 desc[8] = block >> 24; 910 desc[9] = block >> 16; 911 desc[10] = block >> 8; 912 desc[11] = block; 913 } 914 915 static void ata_scsi_sdev_config(struct scsi_device *sdev) 916 { 917 sdev->use_10_for_rw = 1; 918 sdev->use_10_for_ms = 1; 919 920 /* Schedule policy is determined by ->qc_defer() callback and 921 * it needs to see every deferred qc. Set dev_blocked to 1 to 922 * prevent SCSI midlayer from automatically deferring 923 * requests. 924 */ 925 sdev->max_device_blocked = 1; 926 } 927 928 /** 929 * atapi_drain_needed - Check whether data transfer may overflow 930 * @rq: request to be checked 931 * 932 * ATAPI commands which transfer variable length data to host 933 * might overflow due to application error or hardare bug. This 934 * function checks whether overflow should be drained and ignored 935 * for @request. 936 * 937 * LOCKING: 938 * None. 939 * 940 * RETURNS: 941 * 1 if ; otherwise, 0. 942 */ 943 static int atapi_drain_needed(struct request *rq) 944 { 945 if (likely(!blk_pc_request(rq))) 946 return 0; 947 948 if (!rq->data_len || (rq->cmd_flags & REQ_RW)) 949 return 0; 950 951 return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC; 952 } 953 954 static int ata_scsi_dev_config(struct scsi_device *sdev, 955 struct ata_device *dev) 956 { 957 /* configure max sectors */ 958 blk_queue_max_sectors(sdev->request_queue, dev->max_sectors); 959 960 if (dev->class == ATA_DEV_ATAPI) { 961 struct request_queue *q = sdev->request_queue; 962 void *buf; 963 964 /* set the min alignment and padding */ 965 blk_queue_update_dma_alignment(sdev->request_queue, 966 ATA_DMA_PAD_SZ - 1); 967 blk_queue_update_dma_pad(sdev->request_queue, 968 ATA_DMA_PAD_SZ - 1); 969 970 /* configure draining */ 971 buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL); 972 if (!buf) { 973 ata_dev_printk(dev, KERN_ERR, 974 "drain buffer allocation failed\n"); 975 return -ENOMEM; 976 } 977 978 blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN); 979 } else { 980 /* ATA devices must be sector aligned */ 981 blk_queue_update_dma_alignment(sdev->request_queue, 982 ATA_SECT_SIZE - 1); 983 sdev->manage_start_stop = 1; 984 } 985 986 if (dev->flags & ATA_DFLAG_AN) 987 set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events); 988 989 if (dev->flags & ATA_DFLAG_NCQ) { 990 int depth; 991 992 depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); 993 depth = min(ATA_MAX_QUEUE - 1, depth); 994 scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); 995 } 996 997 return 0; 998 } 999 1000 /** 1001 * ata_scsi_slave_config - Set SCSI device attributes 1002 * @sdev: SCSI device to examine 1003 * 1004 * This is called before we actually start reading 1005 * and writing to the device, to configure certain 1006 * SCSI mid-layer behaviors. 1007 * 1008 * LOCKING: 1009 * Defined by SCSI layer. We don't really care. 1010 */ 1011 1012 int ata_scsi_slave_config(struct scsi_device *sdev) 1013 { 1014 struct ata_port *ap = ata_shost_to_port(sdev->host); 1015 struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); 1016 int rc = 0; 1017 1018 ata_scsi_sdev_config(sdev); 1019 1020 if (dev) 1021 rc = ata_scsi_dev_config(sdev, dev); 1022 1023 return rc; 1024 } 1025 1026 /** 1027 * ata_scsi_slave_destroy - SCSI device is about to be destroyed 1028 * @sdev: SCSI device to be destroyed 1029 * 1030 * @sdev is about to be destroyed for hot/warm unplugging. If 1031 * this unplugging was initiated by libata as indicated by NULL 1032 * dev->sdev, this function doesn't have to do anything. 1033 * Otherwise, SCSI layer initiated warm-unplug is in progress. 1034 * Clear dev->sdev, schedule the device for ATA detach and invoke 1035 * EH. 1036 * 1037 * LOCKING: 1038 * Defined by SCSI layer. We don't really care. 1039 */ 1040 void ata_scsi_slave_destroy(struct scsi_device *sdev) 1041 { 1042 struct ata_port *ap = ata_shost_to_port(sdev->host); 1043 struct request_queue *q = sdev->request_queue; 1044 unsigned long flags; 1045 struct ata_device *dev; 1046 1047 if (!ap->ops->error_handler) 1048 return; 1049 1050 spin_lock_irqsave(ap->lock, flags); 1051 dev = __ata_scsi_find_dev(ap, sdev); 1052 if (dev && dev->sdev) { 1053 /* SCSI device already in CANCEL state, no need to offline it */ 1054 dev->sdev = NULL; 1055 dev->flags |= ATA_DFLAG_DETACH; 1056 ata_port_schedule_eh(ap); 1057 } 1058 spin_unlock_irqrestore(ap->lock, flags); 1059 1060 kfree(q->dma_drain_buffer); 1061 q->dma_drain_buffer = NULL; 1062 q->dma_drain_size = 0; 1063 } 1064 1065 /** 1066 * ata_scsi_change_queue_depth - SCSI callback for queue depth config 1067 * @sdev: SCSI device to configure queue depth for 1068 * @queue_depth: new queue depth 1069 * 1070 * This is libata standard hostt->change_queue_depth callback. 1071 * SCSI will call into this callback when user tries to set queue 1072 * depth via sysfs. 1073 * 1074 * LOCKING: 1075 * SCSI layer (we don't care) 1076 * 1077 * RETURNS: 1078 * Newly configured queue depth. 1079 */ 1080 int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) 1081 { 1082 struct ata_port *ap = ata_shost_to_port(sdev->host); 1083 struct ata_device *dev; 1084 unsigned long flags; 1085 1086 if (queue_depth < 1 || queue_depth == sdev->queue_depth) 1087 return sdev->queue_depth; 1088 1089 dev = ata_scsi_find_dev(ap, sdev); 1090 if (!dev || !ata_dev_enabled(dev)) 1091 return sdev->queue_depth; 1092 1093 /* NCQ enabled? */ 1094 spin_lock_irqsave(ap->lock, flags); 1095 dev->flags &= ~ATA_DFLAG_NCQ_OFF; 1096 if (queue_depth == 1 || !ata_ncq_enabled(dev)) { 1097 dev->flags |= ATA_DFLAG_NCQ_OFF; 1098 queue_depth = 1; 1099 } 1100 spin_unlock_irqrestore(ap->lock, flags); 1101 1102 /* limit and apply queue depth */ 1103 queue_depth = min(queue_depth, sdev->host->can_queue); 1104 queue_depth = min(queue_depth, ata_id_queue_depth(dev->id)); 1105 queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1); 1106 1107 if (sdev->queue_depth == queue_depth) 1108 return -EINVAL; 1109 1110 scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); 1111 return queue_depth; 1112 } 1113 1114 /* XXX: for spindown warning */ 1115 static void ata_delayed_done_timerfn(unsigned long arg) 1116 { 1117 struct scsi_cmnd *scmd = (void *)arg; 1118 1119 scmd->scsi_done(scmd); 1120 } 1121 1122 /* XXX: for spindown warning */ 1123 static void ata_delayed_done(struct scsi_cmnd *scmd) 1124 { 1125 static struct timer_list timer; 1126 1127 setup_timer(&timer, ata_delayed_done_timerfn, (unsigned long)scmd); 1128 mod_timer(&timer, jiffies + 5 * HZ); 1129 } 1130 1131 /** 1132 * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command 1133 * @qc: Storage for translated ATA taskfile 1134 * 1135 * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY 1136 * (to start). Perhaps these commands should be preceded by 1137 * CHECK POWER MODE to see what power mode the device is already in. 1138 * [See SAT revision 5 at www.t10.org] 1139 * 1140 * LOCKING: 1141 * spin_lock_irqsave(host lock) 1142 * 1143 * RETURNS: 1144 * Zero on success, non-zero on error. 1145 */ 1146 static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) 1147 { 1148 struct scsi_cmnd *scmd = qc->scsicmd; 1149 struct ata_taskfile *tf = &qc->tf; 1150 const u8 *cdb = scmd->cmnd; 1151 1152 if (scmd->cmd_len < 5) 1153 goto invalid_fld; 1154 1155 tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; 1156 tf->protocol = ATA_PROT_NODATA; 1157 if (cdb[1] & 0x1) { 1158 ; /* ignore IMMED bit, violates sat-r05 */ 1159 } 1160 if (cdb[4] & 0x2) 1161 goto invalid_fld; /* LOEJ bit set not supported */ 1162 if (((cdb[4] >> 4) & 0xf) != 0) 1163 goto invalid_fld; /* power conditions not supported */ 1164 1165 if (cdb[4] & 0x1) { 1166 tf->nsect = 1; /* 1 sector, lba=0 */ 1167 1168 if (qc->dev->flags & ATA_DFLAG_LBA) { 1169 tf->flags |= ATA_TFLAG_LBA; 1170 1171 tf->lbah = 0x0; 1172 tf->lbam = 0x0; 1173 tf->lbal = 0x0; 1174 tf->device |= ATA_LBA; 1175 } else { 1176 /* CHS */ 1177 tf->lbal = 0x1; /* sect */ 1178 tf->lbam = 0x0; /* cyl low */ 1179 tf->lbah = 0x0; /* cyl high */ 1180 } 1181 1182 tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ 1183 } else { 1184 /* XXX: This is for backward compatibility, will be 1185 * removed. Read Documentation/feature-removal-schedule.txt 1186 * for more info. 1187 */ 1188 if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) && 1189 (system_state == SYSTEM_HALT || 1190 system_state == SYSTEM_POWER_OFF)) { 1191 static unsigned long warned; 1192 1193 if (!test_and_set_bit(0, &warned)) { 1194 ata_dev_printk(qc->dev, KERN_WARNING, 1195 "DISK MIGHT NOT BE SPUN DOWN PROPERLY. " 1196 "UPDATE SHUTDOWN UTILITY\n"); 1197 ata_dev_printk(qc->dev, KERN_WARNING, 1198 "For more info, visit " 1199 "http://linux-ata.org/shutdown.html\n"); 1200 1201 /* ->scsi_done is not used, use it for 1202 * delayed completion. 1203 */ 1204 scmd->scsi_done = qc->scsidone; 1205 qc->scsidone = ata_delayed_done; 1206 } 1207 scmd->result = SAM_STAT_GOOD; 1208 return 1; 1209 } 1210 1211 /* Issue ATA STANDBY IMMEDIATE command */ 1212 tf->command = ATA_CMD_STANDBYNOW1; 1213 } 1214 1215 /* 1216 * Standby and Idle condition timers could be implemented but that 1217 * would require libata to implement the Power condition mode page 1218 * and allow the user to change it. Changing mode pages requires 1219 * MODE SELECT to be implemented. 1220 */ 1221 1222 return 0; 1223 1224 invalid_fld: 1225 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); 1226 /* "Invalid field in cbd" */ 1227 return 1; 1228 } 1229 1230 1231 /** 1232 * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command 1233 * @qc: Storage for translated ATA taskfile 1234 * 1235 * Sets up an ATA taskfile to issue FLUSH CACHE or 1236 * FLUSH CACHE EXT. 1237 * 1238 * LOCKING: 1239 * spin_lock_irqsave(host lock) 1240 * 1241 * RETURNS: 1242 * Zero on success, non-zero on error. 1243 */ 1244 static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc) 1245 { 1246 struct ata_taskfile *tf = &qc->tf; 1247 1248 tf->flags |= ATA_TFLAG_DEVICE; 1249 tf->protocol = ATA_PROT_NODATA; 1250 1251 if (qc->dev->flags & ATA_DFLAG_FLUSH_EXT) 1252 tf->command = ATA_CMD_FLUSH_EXT; 1253 else 1254 tf->command = ATA_CMD_FLUSH; 1255 1256 /* flush is critical for IO integrity, consider it an IO command */ 1257 qc->flags |= ATA_QCFLAG_IO; 1258 1259 return 0; 1260 } 1261 1262 /** 1263 * scsi_6_lba_len - Get LBA and transfer length 1264 * @cdb: SCSI command to translate 1265 * 1266 * Calculate LBA and transfer length for 6-byte commands. 1267 * 1268 * RETURNS: 1269 * @plba: the LBA 1270 * @plen: the transfer length 1271 */ 1272 static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen) 1273 { 1274 u64 lba = 0; 1275 u32 len; 1276 1277 VPRINTK("six-byte command\n"); 1278 1279 lba |= ((u64)(cdb[1] & 0x1f)) << 16; 1280 lba |= ((u64)cdb[2]) << 8; 1281 lba |= ((u64)cdb[3]); 1282 1283 len = cdb[4]; 1284 1285 *plba = lba; 1286 *plen = len; 1287 } 1288 1289 /** 1290 * scsi_10_lba_len - Get LBA and transfer length 1291 * @cdb: SCSI command to translate 1292 * 1293 * Calculate LBA and transfer length for 10-byte commands. 1294 * 1295 * RETURNS: 1296 * @plba: the LBA 1297 * @plen: the transfer length 1298 */ 1299 static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen) 1300 { 1301 u64 lba = 0; 1302 u32 len = 0; 1303 1304 VPRINTK("ten-byte command\n"); 1305 1306 lba |= ((u64)cdb[2]) << 24; 1307 lba |= ((u64)cdb[3]) << 16; 1308 lba |= ((u64)cdb[4]) << 8; 1309 lba |= ((u64)cdb[5]); 1310 1311 len |= ((u32)cdb[7]) << 8; 1312 len |= ((u32)cdb[8]); 1313 1314 *plba = lba; 1315 *plen = len; 1316 } 1317 1318 /** 1319 * scsi_16_lba_len - Get LBA and transfer length 1320 * @cdb: SCSI command to translate 1321 * 1322 * Calculate LBA and transfer length for 16-byte commands. 1323 * 1324 * RETURNS: 1325 * @plba: the LBA 1326 * @plen: the transfer length 1327 */ 1328 static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen) 1329 { 1330 u64 lba = 0; 1331 u32 len = 0; 1332 1333 VPRINTK("sixteen-byte command\n"); 1334 1335 lba |= ((u64)cdb[2]) << 56; 1336 lba |= ((u64)cdb[3]) << 48; 1337 lba |= ((u64)cdb[4]) << 40; 1338 lba |= ((u64)cdb[5]) << 32; 1339 lba |= ((u64)cdb[6]) << 24; 1340 lba |= ((u64)cdb[7]) << 16; 1341 lba |= ((u64)cdb[8]) << 8; 1342 lba |= ((u64)cdb[9]); 1343 1344 len |= ((u32)cdb[10]) << 24; 1345 len |= ((u32)cdb[11]) << 16; 1346 len |= ((u32)cdb[12]) << 8; 1347 len |= ((u32)cdb[13]); 1348 1349 *plba = lba; 1350 *plen = len; 1351 } 1352 1353 /** 1354 * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one 1355 * @qc: Storage for translated ATA taskfile 1356 * 1357 * Converts SCSI VERIFY command to an ATA READ VERIFY command. 1358 * 1359 * LOCKING: 1360 * spin_lock_irqsave(host lock) 1361 * 1362 * RETURNS: 1363 * Zero on success, non-zero on error. 1364 */ 1365 static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc) 1366 { 1367 struct scsi_cmnd *scmd = qc->scsicmd; 1368 struct ata_taskfile *tf = &qc->tf; 1369 struct ata_device *dev = qc->dev; 1370 u64 dev_sectors = qc->dev->n_sectors; 1371 const u8 *cdb = scmd->cmnd; 1372 u64 block; 1373 u32 n_block; 1374 1375 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; 1376 tf->protocol = ATA_PROT_NODATA; 1377 1378 if (cdb[0] == VERIFY) { 1379 if (scmd->cmd_len < 10) 1380 goto invalid_fld; 1381 scsi_10_lba_len(cdb, &block, &n_block); 1382 } else if (cdb[0] == VERIFY_16) { 1383 if (scmd->cmd_len < 16) 1384 goto invalid_fld; 1385 scsi_16_lba_len(cdb, &block, &n_block); 1386 } else 1387 goto invalid_fld; 1388 1389 if (!n_block) 1390 goto nothing_to_do; 1391 if (block >= dev_sectors) 1392 goto out_of_range; 1393 if ((block + n_block) > dev_sectors) 1394 goto out_of_range; 1395 1396 if (dev->flags & ATA_DFLAG_LBA) { 1397 tf->flags |= ATA_TFLAG_LBA; 1398 1399 if (lba_28_ok(block, n_block)) { 1400 /* use LBA28 */ 1401 tf->command = ATA_CMD_VERIFY; 1402 tf->device |= (block >> 24) & 0xf; 1403 } else if (lba_48_ok(block, n_block)) { 1404 if (!(dev->flags & ATA_DFLAG_LBA48)) 1405 goto out_of_range; 1406 1407 /* use LBA48 */ 1408 tf->flags |= ATA_TFLAG_LBA48; 1409 tf->command = ATA_CMD_VERIFY_EXT; 1410 1411 tf->hob_nsect = (n_block >> 8) & 0xff; 1412 1413 tf->hob_lbah = (block >> 40) & 0xff; 1414 tf->hob_lbam = (block >> 32) & 0xff; 1415 tf->hob_lbal = (block >> 24) & 0xff; 1416 } else 1417 /* request too large even for LBA48 */ 1418 goto out_of_range; 1419 1420 tf->nsect = n_block & 0xff; 1421 1422 tf->lbah = (block >> 16) & 0xff; 1423 tf->lbam = (block >> 8) & 0xff; 1424 tf->lbal = block & 0xff; 1425 1426 tf->device |= ATA_LBA; 1427 } else { 1428 /* CHS */ 1429 u32 sect, head, cyl, track; 1430 1431 if (!lba_28_ok(block, n_block)) 1432 goto out_of_range; 1433 1434 /* Convert LBA to CHS */ 1435 track = (u32)block / dev->sectors; 1436 cyl = track / dev->heads; 1437 head = track % dev->heads; 1438 sect = (u32)block % dev->sectors + 1; 1439 1440 DPRINTK("block %u track %u cyl %u head %u sect %u\n", 1441 (u32)block, track, cyl, head, sect); 1442 1443 /* Check whether the converted CHS can fit. 1444 Cylinder: 0-65535 1445 Head: 0-15 1446 Sector: 1-255*/ 1447 if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) 1448 goto out_of_range; 1449 1450 tf->command = ATA_CMD_VERIFY; 1451 tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ 1452 tf->lbal = sect; 1453 tf->lbam = cyl; 1454 tf->lbah = cyl >> 8; 1455 tf->device |= head; 1456 } 1457 1458 return 0; 1459 1460 invalid_fld: 1461 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); 1462 /* "Invalid field in cbd" */ 1463 return 1; 1464 1465 out_of_range: 1466 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); 1467 /* "Logical Block Address out of range" */ 1468 return 1; 1469 1470 nothing_to_do: 1471 scmd->result = SAM_STAT_GOOD; 1472 return 1; 1473 } 1474 1475 /** 1476 * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one 1477 * @qc: Storage for translated ATA taskfile 1478 * 1479 * Converts any of six SCSI read/write commands into the 1480 * ATA counterpart, including starting sector (LBA), 1481 * sector count, and taking into account the device's LBA48 1482 * support. 1483 * 1484 * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and 1485 * %WRITE_16 are currently supported. 1486 * 1487 * LOCKING: 1488 * spin_lock_irqsave(host lock) 1489 * 1490 * RETURNS: 1491 * Zero on success, non-zero on error. 1492 */ 1493 static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) 1494 { 1495 struct scsi_cmnd *scmd = qc->scsicmd; 1496 const u8 *cdb = scmd->cmnd; 1497 unsigned int tf_flags = 0; 1498 u64 block; 1499 u32 n_block; 1500 int rc; 1501 1502 if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16) 1503 tf_flags |= ATA_TFLAG_WRITE; 1504 1505 /* Calculate the SCSI LBA, transfer length and FUA. */ 1506 switch (cdb[0]) { 1507 case READ_10: 1508 case WRITE_10: 1509 if (unlikely(scmd->cmd_len < 10)) 1510 goto invalid_fld; 1511 scsi_10_lba_len(cdb, &block, &n_block); 1512 if (unlikely(cdb[1] & (1 << 3))) 1513 tf_flags |= ATA_TFLAG_FUA; 1514 break; 1515 case READ_6: 1516 case WRITE_6: 1517 if (unlikely(scmd->cmd_len < 6)) 1518 goto invalid_fld; 1519 scsi_6_lba_len(cdb, &block, &n_block); 1520 1521 /* for 6-byte r/w commands, transfer length 0 1522 * means 256 blocks of data, not 0 block. 1523 */ 1524 if (!n_block) 1525 n_block = 256; 1526 break; 1527 case READ_16: 1528 case WRITE_16: 1529 if (unlikely(scmd->cmd_len < 16)) 1530 goto invalid_fld; 1531 scsi_16_lba_len(cdb, &block, &n_block); 1532 if (unlikely(cdb[1] & (1 << 3))) 1533 tf_flags |= ATA_TFLAG_FUA; 1534 break; 1535 default: 1536 DPRINTK("no-byte command\n"); 1537 goto invalid_fld; 1538 } 1539 1540 /* Check and compose ATA command */ 1541 if (!n_block) 1542 /* For 10-byte and 16-byte SCSI R/W commands, transfer 1543 * length 0 means transfer 0 block of data. 1544 * However, for ATA R/W commands, sector count 0 means 1545 * 256 or 65536 sectors, not 0 sectors as in SCSI. 1546 * 1547 * WARNING: one or two older ATA drives treat 0 as 0... 1548 */ 1549 goto nothing_to_do; 1550 1551 qc->flags |= ATA_QCFLAG_IO; 1552 qc->nbytes = n_block * ATA_SECT_SIZE; 1553 1554 rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags, 1555 qc->tag); 1556 if (likely(rc == 0)) 1557 return 0; 1558 1559 if (rc == -ERANGE) 1560 goto out_of_range; 1561 /* treat all other errors as -EINVAL, fall through */ 1562 invalid_fld: 1563 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); 1564 /* "Invalid field in cbd" */ 1565 return 1; 1566 1567 out_of_range: 1568 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); 1569 /* "Logical Block Address out of range" */ 1570 return 1; 1571 1572 nothing_to_do: 1573 scmd->result = SAM_STAT_GOOD; 1574 return 1; 1575 } 1576 1577 static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) 1578 { 1579 struct ata_port *ap = qc->ap; 1580 struct scsi_cmnd *cmd = qc->scsicmd; 1581 u8 *cdb = cmd->cmnd; 1582 int need_sense = (qc->err_mask != 0); 1583 1584 /* For ATA pass thru (SAT) commands, generate a sense block if 1585 * user mandated it or if there's an error. Note that if we 1586 * generate because the user forced us to, a check condition 1587 * is generated and the ATA register values are returned 1588 * whether the command completed successfully or not. If there 1589 * was no error, SK, ASC and ASCQ will all be zero. 1590 */ 1591 if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && 1592 ((cdb[2] & 0x20) || need_sense)) { 1593 ata_gen_passthru_sense(qc); 1594 } else { 1595 if (!need_sense) { 1596 cmd->result = SAM_STAT_GOOD; 1597 } else { 1598 /* TODO: decide which descriptor format to use 1599 * for 48b LBA devices and call that here 1600 * instead of the fixed desc, which is only 1601 * good for smaller LBA (and maybe CHS?) 1602 * devices. 1603 */ 1604 ata_gen_ata_sense(qc); 1605 } 1606 } 1607 1608 /* XXX: track spindown state for spindown skipping and warning */ 1609 if (unlikely(qc->tf.command == ATA_CMD_STANDBY || 1610 qc->tf.command == ATA_CMD_STANDBYNOW1)) 1611 qc->dev->flags |= ATA_DFLAG_SPUNDOWN; 1612 else if (likely(system_state != SYSTEM_HALT && 1613 system_state != SYSTEM_POWER_OFF)) 1614 qc->dev->flags &= ~ATA_DFLAG_SPUNDOWN; 1615 1616 if (need_sense && !ap->ops->error_handler) 1617 ata_dump_status(ap->print_id, &qc->result_tf); 1618 1619 qc->scsidone(cmd); 1620 1621 ata_qc_free(qc); 1622 } 1623 1624 /** 1625 * ata_scsi_translate - Translate then issue SCSI command to ATA device 1626 * @dev: ATA device to which the command is addressed 1627 * @cmd: SCSI command to execute 1628 * @done: SCSI command completion function 1629 * @xlat_func: Actor which translates @cmd to an ATA taskfile 1630 * 1631 * Our ->queuecommand() function has decided that the SCSI 1632 * command issued can be directly translated into an ATA 1633 * command, rather than handled internally. 1634 * 1635 * This function sets up an ata_queued_cmd structure for the 1636 * SCSI command, and sends that ata_queued_cmd to the hardware. 1637 * 1638 * The xlat_func argument (actor) returns 0 if ready to execute 1639 * ATA command, else 1 to finish translation. If 1 is returned 1640 * then cmd->result (and possibly cmd->sense_buffer) are assumed 1641 * to be set reflecting an error condition or clean (early) 1642 * termination. 1643 * 1644 * LOCKING: 1645 * spin_lock_irqsave(host lock) 1646 * 1647 * RETURNS: 1648 * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command 1649 * needs to be deferred. 1650 */ 1651 static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, 1652 void (*done)(struct scsi_cmnd *), 1653 ata_xlat_func_t xlat_func) 1654 { 1655 struct ata_port *ap = dev->link->ap; 1656 struct ata_queued_cmd *qc; 1657 int rc; 1658 1659 VPRINTK("ENTER\n"); 1660 1661 qc = ata_scsi_qc_new(dev, cmd, done); 1662 if (!qc) 1663 goto err_mem; 1664 1665 /* data is present; dma-map it */ 1666 if (cmd->sc_data_direction == DMA_FROM_DEVICE || 1667 cmd->sc_data_direction == DMA_TO_DEVICE) { 1668 if (unlikely(scsi_bufflen(cmd) < 1)) { 1669 ata_dev_printk(dev, KERN_WARNING, 1670 "WARNING: zero len r/w req\n"); 1671 goto err_did; 1672 } 1673 1674 ata_sg_init(qc, scsi_sglist(cmd), scsi_sg_count(cmd)); 1675 1676 qc->dma_dir = cmd->sc_data_direction; 1677 } 1678 1679 qc->complete_fn = ata_scsi_qc_complete; 1680 1681 if (xlat_func(qc)) 1682 goto early_finish; 1683 1684 if (ap->ops->qc_defer) { 1685 if ((rc = ap->ops->qc_defer(qc))) 1686 goto defer; 1687 } 1688 1689 /* select device, send command to hardware */ 1690 ata_qc_issue(qc); 1691 1692 VPRINTK("EXIT\n"); 1693 return 0; 1694 1695 early_finish: 1696 ata_qc_free(qc); 1697 qc->scsidone(cmd); 1698 DPRINTK("EXIT - early finish (good or error)\n"); 1699 return 0; 1700 1701 err_did: 1702 ata_qc_free(qc); 1703 cmd->result = (DID_ERROR << 16); 1704 qc->scsidone(cmd); 1705 err_mem: 1706 DPRINTK("EXIT - internal\n"); 1707 return 0; 1708 1709 defer: 1710 ata_qc_free(qc); 1711 DPRINTK("EXIT - defer\n"); 1712 if (rc == ATA_DEFER_LINK) 1713 return SCSI_MLQUEUE_DEVICE_BUSY; 1714 else 1715 return SCSI_MLQUEUE_HOST_BUSY; 1716 } 1717 1718 /** 1719 * ata_scsi_rbuf_get - Map response buffer. 1720 * @cmd: SCSI command containing buffer to be mapped. 1721 * @flags: unsigned long variable to store irq enable status 1722 * @copy_in: copy in from user buffer 1723 * 1724 * Prepare buffer for simulated SCSI commands. 1725 * 1726 * LOCKING: 1727 * spin_lock_irqsave(ata_scsi_rbuf_lock) on success 1728 * 1729 * RETURNS: 1730 * Pointer to response buffer. 1731 */ 1732 static void *ata_scsi_rbuf_get(struct scsi_cmnd *cmd, bool copy_in, 1733 unsigned long *flags) 1734 { 1735 spin_lock_irqsave(&ata_scsi_rbuf_lock, *flags); 1736 1737 memset(ata_scsi_rbuf, 0, ATA_SCSI_RBUF_SIZE); 1738 if (copy_in) 1739 sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 1740 ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE); 1741 return ata_scsi_rbuf; 1742 } 1743 1744 /** 1745 * ata_scsi_rbuf_put - Unmap response buffer. 1746 * @cmd: SCSI command containing buffer to be unmapped. 1747 * @copy_out: copy out result 1748 * @flags: @flags passed to ata_scsi_rbuf_get() 1749 * 1750 * Returns rbuf buffer. The result is copied to @cmd's buffer if 1751 * @copy_back is true. 1752 * 1753 * LOCKING: 1754 * Unlocks ata_scsi_rbuf_lock. 1755 */ 1756 static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, bool copy_out, 1757 unsigned long *flags) 1758 { 1759 if (copy_out) 1760 sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 1761 ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE); 1762 spin_unlock_irqrestore(&ata_scsi_rbuf_lock, *flags); 1763 } 1764 1765 /** 1766 * ata_scsi_rbuf_fill - wrapper for SCSI command simulators 1767 * @args: device IDENTIFY data / SCSI command of interest. 1768 * @actor: Callback hook for desired SCSI command simulator 1769 * 1770 * Takes care of the hard work of simulating a SCSI command... 1771 * Mapping the response buffer, calling the command's handler, 1772 * and handling the handler's return value. This return value 1773 * indicates whether the handler wishes the SCSI command to be 1774 * completed successfully (0), or not (in which case cmd->result 1775 * and sense buffer are assumed to be set). 1776 * 1777 * LOCKING: 1778 * spin_lock_irqsave(host lock) 1779 */ 1780 static void ata_scsi_rbuf_fill(struct ata_scsi_args *args, 1781 unsigned int (*actor)(struct ata_scsi_args *args, u8 *rbuf)) 1782 { 1783 u8 *rbuf; 1784 unsigned int rc; 1785 struct scsi_cmnd *cmd = args->cmd; 1786 unsigned long flags; 1787 1788 rbuf = ata_scsi_rbuf_get(cmd, false, &flags); 1789 rc = actor(args, rbuf); 1790 ata_scsi_rbuf_put(cmd, rc == 0, &flags); 1791 1792 if (rc == 0) 1793 cmd->result = SAM_STAT_GOOD; 1794 args->done(cmd); 1795 } 1796 1797 /** 1798 * ata_scsiop_inq_std - Simulate INQUIRY command 1799 * @args: device IDENTIFY data / SCSI command of interest. 1800 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 1801 * 1802 * Returns standard device identification data associated 1803 * with non-VPD INQUIRY command output. 1804 * 1805 * LOCKING: 1806 * spin_lock_irqsave(host lock) 1807 */ 1808 static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) 1809 { 1810 const u8 versions[] = { 1811 0x60, /* SAM-3 (no version claimed) */ 1812 1813 0x03, 1814 0x20, /* SBC-2 (no version claimed) */ 1815 1816 0x02, 1817 0x60 /* SPC-3 (no version claimed) */ 1818 }; 1819 u8 hdr[] = { 1820 TYPE_DISK, 1821 0, 1822 0x5, /* claim SPC-3 version compatibility */ 1823 2, 1824 95 - 4 1825 }; 1826 1827 VPRINTK("ENTER\n"); 1828 1829 /* set scsi removeable (RMB) bit per ata bit */ 1830 if (ata_id_removeable(args->id)) 1831 hdr[1] |= (1 << 7); 1832 1833 memcpy(rbuf, hdr, sizeof(hdr)); 1834 memcpy(&rbuf[8], "ATA ", 8); 1835 ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16); 1836 ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4); 1837 1838 if (rbuf[32] == 0 || rbuf[32] == ' ') 1839 memcpy(&rbuf[32], "n/a ", 4); 1840 1841 memcpy(rbuf + 59, versions, sizeof(versions)); 1842 1843 return 0; 1844 } 1845 1846 /** 1847 * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages 1848 * @args: device IDENTIFY data / SCSI command of interest. 1849 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 1850 * 1851 * Returns list of inquiry VPD pages available. 1852 * 1853 * LOCKING: 1854 * spin_lock_irqsave(host lock) 1855 */ 1856 static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) 1857 { 1858 const u8 pages[] = { 1859 0x00, /* page 0x00, this page */ 1860 0x80, /* page 0x80, unit serial no page */ 1861 0x83, /* page 0x83, device ident page */ 1862 0x89, /* page 0x89, ata info page */ 1863 0xb1, /* page 0xb1, block device characteristics page */ 1864 }; 1865 1866 rbuf[3] = sizeof(pages); /* number of supported VPD pages */ 1867 memcpy(rbuf + 4, pages, sizeof(pages)); 1868 return 0; 1869 } 1870 1871 /** 1872 * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number 1873 * @args: device IDENTIFY data / SCSI command of interest. 1874 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 1875 * 1876 * Returns ATA device serial number. 1877 * 1878 * LOCKING: 1879 * spin_lock_irqsave(host lock) 1880 */ 1881 static unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf) 1882 { 1883 const u8 hdr[] = { 1884 0, 1885 0x80, /* this page code */ 1886 0, 1887 ATA_ID_SERNO_LEN, /* page len */ 1888 }; 1889 1890 memcpy(rbuf, hdr, sizeof(hdr)); 1891 ata_id_string(args->id, (unsigned char *) &rbuf[4], 1892 ATA_ID_SERNO, ATA_ID_SERNO_LEN); 1893 return 0; 1894 } 1895 1896 /** 1897 * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity 1898 * @args: device IDENTIFY data / SCSI command of interest. 1899 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 1900 * 1901 * Yields two logical unit device identification designators: 1902 * - vendor specific ASCII containing the ATA serial number 1903 * - SAT defined "t10 vendor id based" containing ASCII vendor 1904 * name ("ATA "), model and serial numbers. 1905 * 1906 * LOCKING: 1907 * spin_lock_irqsave(host lock) 1908 */ 1909 static unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf) 1910 { 1911 const int sat_model_serial_desc_len = 68; 1912 int num; 1913 1914 rbuf[1] = 0x83; /* this page code */ 1915 num = 4; 1916 1917 /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */ 1918 rbuf[num + 0] = 2; 1919 rbuf[num + 3] = ATA_ID_SERNO_LEN; 1920 num += 4; 1921 ata_id_string(args->id, (unsigned char *) rbuf + num, 1922 ATA_ID_SERNO, ATA_ID_SERNO_LEN); 1923 num += ATA_ID_SERNO_LEN; 1924 1925 /* SAT defined lu model and serial numbers descriptor */ 1926 /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */ 1927 rbuf[num + 0] = 2; 1928 rbuf[num + 1] = 1; 1929 rbuf[num + 3] = sat_model_serial_desc_len; 1930 num += 4; 1931 memcpy(rbuf + num, "ATA ", 8); 1932 num += 8; 1933 ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_PROD, 1934 ATA_ID_PROD_LEN); 1935 num += ATA_ID_PROD_LEN; 1936 ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_SERNO, 1937 ATA_ID_SERNO_LEN); 1938 num += ATA_ID_SERNO_LEN; 1939 1940 rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */ 1941 return 0; 1942 } 1943 1944 /** 1945 * ata_scsiop_inq_89 - Simulate INQUIRY VPD page 89, ATA info 1946 * @args: device IDENTIFY data / SCSI command of interest. 1947 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 1948 * 1949 * Yields SAT-specified ATA VPD page. 1950 * 1951 * LOCKING: 1952 * spin_lock_irqsave(host lock) 1953 */ 1954 static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) 1955 { 1956 struct ata_taskfile tf; 1957 1958 memset(&tf, 0, sizeof(tf)); 1959 1960 rbuf[1] = 0x89; /* our page code */ 1961 rbuf[2] = (0x238 >> 8); /* page size fixed at 238h */ 1962 rbuf[3] = (0x238 & 0xff); 1963 1964 memcpy(&rbuf[8], "linux ", 8); 1965 memcpy(&rbuf[16], "libata ", 16); 1966 memcpy(&rbuf[32], DRV_VERSION, 4); 1967 ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4); 1968 1969 /* we don't store the ATA device signature, so we fake it */ 1970 1971 tf.command = ATA_DRDY; /* really, this is Status reg */ 1972 tf.lbal = 0x1; 1973 tf.nsect = 0x1; 1974 1975 ata_tf_to_fis(&tf, 0, 1, &rbuf[36]); /* TODO: PMP? */ 1976 rbuf[36] = 0x34; /* force D2H Reg FIS (34h) */ 1977 1978 rbuf[56] = ATA_CMD_ID_ATA; 1979 1980 memcpy(&rbuf[60], &args->id[0], 512); 1981 return 0; 1982 } 1983 1984 static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) 1985 { 1986 rbuf[1] = 0xb1; 1987 rbuf[3] = 0x3c; 1988 if (ata_id_major_version(args->id) > 7) { 1989 rbuf[4] = args->id[217] >> 8; 1990 rbuf[5] = args->id[217]; 1991 rbuf[7] = args->id[168] & 0xf; 1992 } 1993 1994 return 0; 1995 } 1996 1997 /** 1998 * ata_scsiop_noop - Command handler that simply returns success. 1999 * @args: device IDENTIFY data / SCSI command of interest. 2000 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2001 * 2002 * No operation. Simply returns success to caller, to indicate 2003 * that the caller should successfully complete this SCSI command. 2004 * 2005 * LOCKING: 2006 * spin_lock_irqsave(host lock) 2007 */ 2008 static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf) 2009 { 2010 VPRINTK("ENTER\n"); 2011 return 0; 2012 } 2013 2014 /** 2015 * ata_msense_caching - Simulate MODE SENSE caching info page 2016 * @id: device IDENTIFY data 2017 * @buf: output buffer 2018 * 2019 * Generate a caching info page, which conditionally indicates 2020 * write caching to the SCSI layer, depending on device 2021 * capabilities. 2022 * 2023 * LOCKING: 2024 * None. 2025 */ 2026 static unsigned int ata_msense_caching(u16 *id, u8 *buf) 2027 { 2028 memcpy(buf, def_cache_mpage, sizeof(def_cache_mpage)); 2029 if (ata_id_wcache_enabled(id)) 2030 buf[2] |= (1 << 2); /* write cache enable */ 2031 if (!ata_id_rahead_enabled(id)) 2032 buf[12] |= (1 << 5); /* disable read ahead */ 2033 return sizeof(def_cache_mpage); 2034 } 2035 2036 /** 2037 * ata_msense_ctl_mode - Simulate MODE SENSE control mode page 2038 * @buf: output buffer 2039 * 2040 * Generate a generic MODE SENSE control mode page. 2041 * 2042 * LOCKING: 2043 * None. 2044 */ 2045 static unsigned int ata_msense_ctl_mode(u8 *buf) 2046 { 2047 memcpy(buf, def_control_mpage, sizeof(def_control_mpage)); 2048 return sizeof(def_control_mpage); 2049 } 2050 2051 /** 2052 * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page 2053 * @buf: output buffer 2054 * 2055 * Generate a generic MODE SENSE r/w error recovery page. 2056 * 2057 * LOCKING: 2058 * None. 2059 */ 2060 static unsigned int ata_msense_rw_recovery(u8 *buf) 2061 { 2062 memcpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage)); 2063 return sizeof(def_rw_recovery_mpage); 2064 } 2065 2066 /* 2067 * We can turn this into a real blacklist if it's needed, for now just 2068 * blacklist any Maxtor BANC1G10 revision firmware 2069 */ 2070 static int ata_dev_supports_fua(u16 *id) 2071 { 2072 unsigned char model[ATA_ID_PROD_LEN + 1], fw[ATA_ID_FW_REV_LEN + 1]; 2073 2074 if (!libata_fua) 2075 return 0; 2076 if (!ata_id_has_fua(id)) 2077 return 0; 2078 2079 ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model)); 2080 ata_id_c_string(id, fw, ATA_ID_FW_REV, sizeof(fw)); 2081 2082 if (strcmp(model, "Maxtor")) 2083 return 1; 2084 if (strcmp(fw, "BANC1G10")) 2085 return 1; 2086 2087 return 0; /* blacklisted */ 2088 } 2089 2090 /** 2091 * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands 2092 * @args: device IDENTIFY data / SCSI command of interest. 2093 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2094 * 2095 * Simulate MODE SENSE commands. Assume this is invoked for direct 2096 * access devices (e.g. disks) only. There should be no block 2097 * descriptor for other device types. 2098 * 2099 * LOCKING: 2100 * spin_lock_irqsave(host lock) 2101 */ 2102 static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) 2103 { 2104 struct ata_device *dev = args->dev; 2105 u8 *scsicmd = args->cmd->cmnd, *p = rbuf; 2106 const u8 sat_blk_desc[] = { 2107 0, 0, 0, 0, /* number of blocks: sat unspecified */ 2108 0, 2109 0, 0x2, 0x0 /* block length: 512 bytes */ 2110 }; 2111 u8 pg, spg; 2112 unsigned int ebd, page_control, six_byte; 2113 u8 dpofua; 2114 2115 VPRINTK("ENTER\n"); 2116 2117 six_byte = (scsicmd[0] == MODE_SENSE); 2118 ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ 2119 /* 2120 * LLBA bit in msense(10) ignored (compliant) 2121 */ 2122 2123 page_control = scsicmd[2] >> 6; 2124 switch (page_control) { 2125 case 0: /* current */ 2126 break; /* supported */ 2127 case 3: /* saved */ 2128 goto saving_not_supp; 2129 case 1: /* changeable */ 2130 case 2: /* defaults */ 2131 default: 2132 goto invalid_fld; 2133 } 2134 2135 if (six_byte) 2136 p += 4 + (ebd ? 8 : 0); 2137 else 2138 p += 8 + (ebd ? 8 : 0); 2139 2140 pg = scsicmd[2] & 0x3f; 2141 spg = scsicmd[3]; 2142 /* 2143 * No mode subpages supported (yet) but asking for _all_ 2144 * subpages may be valid 2145 */ 2146 if (spg && (spg != ALL_SUB_MPAGES)) 2147 goto invalid_fld; 2148 2149 switch(pg) { 2150 case RW_RECOVERY_MPAGE: 2151 p += ata_msense_rw_recovery(p); 2152 break; 2153 2154 case CACHE_MPAGE: 2155 p += ata_msense_caching(args->id, p); 2156 break; 2157 2158 case CONTROL_MPAGE: 2159 p += ata_msense_ctl_mode(p); 2160 break; 2161 2162 case ALL_MPAGES: 2163 p += ata_msense_rw_recovery(p); 2164 p += ata_msense_caching(args->id, p); 2165 p += ata_msense_ctl_mode(p); 2166 break; 2167 2168 default: /* invalid page code */ 2169 goto invalid_fld; 2170 } 2171 2172 dpofua = 0; 2173 if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && 2174 (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) 2175 dpofua = 1 << 4; 2176 2177 if (six_byte) { 2178 rbuf[0] = p - rbuf - 1; 2179 rbuf[2] |= dpofua; 2180 if (ebd) { 2181 rbuf[3] = sizeof(sat_blk_desc); 2182 memcpy(rbuf + 4, sat_blk_desc, sizeof(sat_blk_desc)); 2183 } 2184 } else { 2185 unsigned int output_len = p - rbuf - 2; 2186 2187 rbuf[0] = output_len >> 8; 2188 rbuf[1] = output_len; 2189 rbuf[3] |= dpofua; 2190 if (ebd) { 2191 rbuf[7] = sizeof(sat_blk_desc); 2192 memcpy(rbuf + 8, sat_blk_desc, sizeof(sat_blk_desc)); 2193 } 2194 } 2195 return 0; 2196 2197 invalid_fld: 2198 ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); 2199 /* "Invalid field in cbd" */ 2200 return 1; 2201 2202 saving_not_supp: 2203 ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); 2204 /* "Saving parameters not supported" */ 2205 return 1; 2206 } 2207 2208 /** 2209 * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands 2210 * @args: device IDENTIFY data / SCSI command of interest. 2211 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2212 * 2213 * Simulate READ CAPACITY commands. 2214 * 2215 * LOCKING: 2216 * None. 2217 */ 2218 static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) 2219 { 2220 u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */ 2221 2222 VPRINTK("ENTER\n"); 2223 2224 if (args->cmd->cmnd[0] == READ_CAPACITY) { 2225 if (last_lba >= 0xffffffffULL) 2226 last_lba = 0xffffffff; 2227 2228 /* sector count, 32-bit */ 2229 rbuf[0] = last_lba >> (8 * 3); 2230 rbuf[1] = last_lba >> (8 * 2); 2231 rbuf[2] = last_lba >> (8 * 1); 2232 rbuf[3] = last_lba; 2233 2234 /* sector size */ 2235 rbuf[6] = ATA_SECT_SIZE >> 8; 2236 rbuf[7] = ATA_SECT_SIZE & 0xff; 2237 } else { 2238 /* sector count, 64-bit */ 2239 rbuf[0] = last_lba >> (8 * 7); 2240 rbuf[1] = last_lba >> (8 * 6); 2241 rbuf[2] = last_lba >> (8 * 5); 2242 rbuf[3] = last_lba >> (8 * 4); 2243 rbuf[4] = last_lba >> (8 * 3); 2244 rbuf[5] = last_lba >> (8 * 2); 2245 rbuf[6] = last_lba >> (8 * 1); 2246 rbuf[7] = last_lba; 2247 2248 /* sector size */ 2249 rbuf[10] = ATA_SECT_SIZE >> 8; 2250 rbuf[11] = ATA_SECT_SIZE & 0xff; 2251 } 2252 2253 return 0; 2254 } 2255 2256 /** 2257 * ata_scsiop_report_luns - Simulate REPORT LUNS command 2258 * @args: device IDENTIFY data / SCSI command of interest. 2259 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2260 * 2261 * Simulate REPORT LUNS command. 2262 * 2263 * LOCKING: 2264 * spin_lock_irqsave(host lock) 2265 */ 2266 static unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf) 2267 { 2268 VPRINTK("ENTER\n"); 2269 rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */ 2270 2271 return 0; 2272 } 2273 2274 static void atapi_sense_complete(struct ata_queued_cmd *qc) 2275 { 2276 if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { 2277 /* FIXME: not quite right; we don't want the 2278 * translation of taskfile registers into 2279 * a sense descriptors, since that's only 2280 * correct for ATA, not ATAPI 2281 */ 2282 ata_gen_passthru_sense(qc); 2283 } 2284 2285 qc->scsidone(qc->scsicmd); 2286 ata_qc_free(qc); 2287 } 2288 2289 /* is it pointless to prefer PIO for "safety reasons"? */ 2290 static inline int ata_pio_use_silly(struct ata_port *ap) 2291 { 2292 return (ap->flags & ATA_FLAG_PIO_DMA); 2293 } 2294 2295 static void atapi_request_sense(struct ata_queued_cmd *qc) 2296 { 2297 struct ata_port *ap = qc->ap; 2298 struct scsi_cmnd *cmd = qc->scsicmd; 2299 2300 DPRINTK("ATAPI request sense\n"); 2301 2302 /* FIXME: is this needed? */ 2303 memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); 2304 2305 #ifdef CONFIG_ATA_SFF 2306 if (ap->ops->sff_tf_read) 2307 ap->ops->sff_tf_read(ap, &qc->tf); 2308 #endif 2309 2310 /* fill these in, for the case where they are -not- overwritten */ 2311 cmd->sense_buffer[0] = 0x70; 2312 cmd->sense_buffer[2] = qc->tf.feature >> 4; 2313 2314 ata_qc_reinit(qc); 2315 2316 /* setup sg table and init transfer direction */ 2317 sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); 2318 ata_sg_init(qc, &qc->sgent, 1); 2319 qc->dma_dir = DMA_FROM_DEVICE; 2320 2321 memset(&qc->cdb, 0, qc->dev->cdb_len); 2322 qc->cdb[0] = REQUEST_SENSE; 2323 qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; 2324 2325 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; 2326 qc->tf.command = ATA_CMD_PACKET; 2327 2328 if (ata_pio_use_silly(ap)) { 2329 qc->tf.protocol = ATAPI_PROT_DMA; 2330 qc->tf.feature |= ATAPI_PKT_DMA; 2331 } else { 2332 qc->tf.protocol = ATAPI_PROT_PIO; 2333 qc->tf.lbam = SCSI_SENSE_BUFFERSIZE; 2334 qc->tf.lbah = 0; 2335 } 2336 qc->nbytes = SCSI_SENSE_BUFFERSIZE; 2337 2338 qc->complete_fn = atapi_sense_complete; 2339 2340 ata_qc_issue(qc); 2341 2342 DPRINTK("EXIT\n"); 2343 } 2344 2345 static void atapi_qc_complete(struct ata_queued_cmd *qc) 2346 { 2347 struct scsi_cmnd *cmd = qc->scsicmd; 2348 unsigned int err_mask = qc->err_mask; 2349 2350 VPRINTK("ENTER, err_mask 0x%X\n", err_mask); 2351 2352 /* handle completion from new EH */ 2353 if (unlikely(qc->ap->ops->error_handler && 2354 (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { 2355 2356 if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { 2357 /* FIXME: not quite right; we don't want the 2358 * translation of taskfile registers into a 2359 * sense descriptors, since that's only 2360 * correct for ATA, not ATAPI 2361 */ 2362 ata_gen_passthru_sense(qc); 2363 } 2364 2365 /* SCSI EH automatically locks door if sdev->locked is 2366 * set. Sometimes door lock request continues to 2367 * fail, for example, when no media is present. This 2368 * creates a loop - SCSI EH issues door lock which 2369 * fails and gets invoked again to acquire sense data 2370 * for the failed command. 2371 * 2372 * If door lock fails, always clear sdev->locked to 2373 * avoid this infinite loop. 2374 */ 2375 if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL) 2376 qc->dev->sdev->locked = 0; 2377 2378 qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; 2379 qc->scsidone(cmd); 2380 ata_qc_free(qc); 2381 return; 2382 } 2383 2384 /* successful completion or old EH failure path */ 2385 if (unlikely(err_mask & AC_ERR_DEV)) { 2386 cmd->result = SAM_STAT_CHECK_CONDITION; 2387 atapi_request_sense(qc); 2388 return; 2389 } else if (unlikely(err_mask)) { 2390 /* FIXME: not quite right; we don't want the 2391 * translation of taskfile registers into 2392 * a sense descriptors, since that's only 2393 * correct for ATA, not ATAPI 2394 */ 2395 ata_gen_passthru_sense(qc); 2396 } else { 2397 u8 *scsicmd = cmd->cmnd; 2398 2399 if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { 2400 unsigned long flags; 2401 u8 *buf; 2402 2403 buf = ata_scsi_rbuf_get(cmd, true, &flags); 2404 2405 /* ATAPI devices typically report zero for their SCSI version, 2406 * and sometimes deviate from the spec WRT response data 2407 * format. If SCSI version is reported as zero like normal, 2408 * then we make the following fixups: 1) Fake MMC-5 version, 2409 * to indicate to the Linux scsi midlayer this is a modern 2410 * device. 2) Ensure response data format / ATAPI information 2411 * are always correct. 2412 */ 2413 if (buf[2] == 0) { 2414 buf[2] = 0x5; 2415 buf[3] = 0x32; 2416 } 2417 2418 ata_scsi_rbuf_put(cmd, true, &flags); 2419 } 2420 2421 cmd->result = SAM_STAT_GOOD; 2422 } 2423 2424 qc->scsidone(cmd); 2425 ata_qc_free(qc); 2426 } 2427 /** 2428 * atapi_xlat - Initialize PACKET taskfile 2429 * @qc: command structure to be initialized 2430 * 2431 * LOCKING: 2432 * spin_lock_irqsave(host lock) 2433 * 2434 * RETURNS: 2435 * Zero on success, non-zero on failure. 2436 */ 2437 static unsigned int atapi_xlat(struct ata_queued_cmd *qc) 2438 { 2439 struct scsi_cmnd *scmd = qc->scsicmd; 2440 struct ata_device *dev = qc->dev; 2441 int nodata = (scmd->sc_data_direction == DMA_NONE); 2442 int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO); 2443 unsigned int nbytes; 2444 2445 memset(qc->cdb, 0, dev->cdb_len); 2446 memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len); 2447 2448 qc->complete_fn = atapi_qc_complete; 2449 2450 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; 2451 if (scmd->sc_data_direction == DMA_TO_DEVICE) { 2452 qc->tf.flags |= ATA_TFLAG_WRITE; 2453 DPRINTK("direction: write\n"); 2454 } 2455 2456 qc->tf.command = ATA_CMD_PACKET; 2457 ata_qc_set_pc_nbytes(qc); 2458 2459 /* check whether ATAPI DMA is safe */ 2460 if (!nodata && !using_pio && atapi_check_dma(qc)) 2461 using_pio = 1; 2462 2463 /* Some controller variants snoop this value for Packet 2464 * transfers to do state machine and FIFO management. Thus we 2465 * want to set it properly, and for DMA where it is 2466 * effectively meaningless. 2467 */ 2468 nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024); 2469 2470 /* Most ATAPI devices which honor transfer chunk size don't 2471 * behave according to the spec when odd chunk size which 2472 * matches the transfer length is specified. If the number of 2473 * bytes to transfer is 2n+1. According to the spec, what 2474 * should happen is to indicate that 2n+1 is going to be 2475 * transferred and transfer 2n+2 bytes where the last byte is 2476 * padding. 2477 * 2478 * In practice, this doesn't happen. ATAPI devices first 2479 * indicate and transfer 2n bytes and then indicate and 2480 * transfer 2 bytes where the last byte is padding. 2481 * 2482 * This inconsistency confuses several controllers which 2483 * perform PIO using DMA such as Intel AHCIs and sil3124/32. 2484 * These controllers use actual number of transferred bytes to 2485 * update DMA poitner and transfer of 4n+2 bytes make those 2486 * controller push DMA pointer by 4n+4 bytes because SATA data 2487 * FISes are aligned to 4 bytes. This causes data corruption 2488 * and buffer overrun. 2489 * 2490 * Always setting nbytes to even number solves this problem 2491 * because then ATAPI devices don't have to split data at 2n 2492 * boundaries. 2493 */ 2494 if (nbytes & 0x1) 2495 nbytes++; 2496 2497 qc->tf.lbam = (nbytes & 0xFF); 2498 qc->tf.lbah = (nbytes >> 8); 2499 2500 if (nodata) 2501 qc->tf.protocol = ATAPI_PROT_NODATA; 2502 else if (using_pio) 2503 qc->tf.protocol = ATAPI_PROT_PIO; 2504 else { 2505 /* DMA data xfer */ 2506 qc->tf.protocol = ATAPI_PROT_DMA; 2507 qc->tf.feature |= ATAPI_PKT_DMA; 2508 2509 if ((dev->flags & ATA_DFLAG_DMADIR) && 2510 (scmd->sc_data_direction != DMA_TO_DEVICE)) 2511 /* some SATA bridges need us to indicate data xfer direction */ 2512 qc->tf.feature |= ATAPI_DMADIR; 2513 } 2514 2515 2516 /* FIXME: We need to translate 0x05 READ_BLOCK_LIMITS to a MODE_SENSE 2517 as ATAPI tape drives don't get this right otherwise */ 2518 return 0; 2519 } 2520 2521 static struct ata_device *ata_find_dev(struct ata_port *ap, int devno) 2522 { 2523 if (!sata_pmp_attached(ap)) { 2524 if (likely(devno < ata_link_max_devices(&ap->link))) 2525 return &ap->link.device[devno]; 2526 } else { 2527 if (likely(devno < ap->nr_pmp_links)) 2528 return &ap->pmp_link[devno].device[0]; 2529 } 2530 2531 return NULL; 2532 } 2533 2534 static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, 2535 const struct scsi_device *scsidev) 2536 { 2537 int devno; 2538 2539 /* skip commands not addressed to targets we simulate */ 2540 if (!sata_pmp_attached(ap)) { 2541 if (unlikely(scsidev->channel || scsidev->lun)) 2542 return NULL; 2543 devno = scsidev->id; 2544 } else { 2545 if (unlikely(scsidev->id || scsidev->lun)) 2546 return NULL; 2547 devno = scsidev->channel; 2548 } 2549 2550 return ata_find_dev(ap, devno); 2551 } 2552 2553 /** 2554 * ata_scsi_dev_enabled - determine if device is enabled 2555 * @dev: ATA device 2556 * 2557 * Determine if commands should be sent to the specified device. 2558 * 2559 * LOCKING: 2560 * spin_lock_irqsave(host lock) 2561 * 2562 * RETURNS: 2563 * 0 if commands are not allowed / 1 if commands are allowed 2564 */ 2565 2566 static int ata_scsi_dev_enabled(struct ata_device *dev) 2567 { 2568 if (unlikely(!ata_dev_enabled(dev))) 2569 return 0; 2570 2571 if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) { 2572 if (unlikely(dev->class == ATA_DEV_ATAPI)) { 2573 ata_dev_printk(dev, KERN_WARNING, 2574 "WARNING: ATAPI is %s, device ignored.\n", 2575 atapi_enabled ? "not supported with this driver" : "disabled"); 2576 return 0; 2577 } 2578 } 2579 2580 return 1; 2581 } 2582 2583 /** 2584 * ata_scsi_find_dev - lookup ata_device from scsi_cmnd 2585 * @ap: ATA port to which the device is attached 2586 * @scsidev: SCSI device from which we derive the ATA device 2587 * 2588 * Given various information provided in struct scsi_cmnd, 2589 * map that onto an ATA bus, and using that mapping 2590 * determine which ata_device is associated with the 2591 * SCSI command to be sent. 2592 * 2593 * LOCKING: 2594 * spin_lock_irqsave(host lock) 2595 * 2596 * RETURNS: 2597 * Associated ATA device, or %NULL if not found. 2598 */ 2599 static struct ata_device * 2600 ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) 2601 { 2602 struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); 2603 2604 if (unlikely(!dev || !ata_scsi_dev_enabled(dev))) 2605 return NULL; 2606 2607 return dev; 2608 } 2609 2610 /* 2611 * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. 2612 * @byte1: Byte 1 from pass-thru CDB. 2613 * 2614 * RETURNS: 2615 * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. 2616 */ 2617 static u8 2618 ata_scsi_map_proto(u8 byte1) 2619 { 2620 switch((byte1 & 0x1e) >> 1) { 2621 case 3: /* Non-data */ 2622 return ATA_PROT_NODATA; 2623 2624 case 6: /* DMA */ 2625 case 10: /* UDMA Data-in */ 2626 case 11: /* UDMA Data-Out */ 2627 return ATA_PROT_DMA; 2628 2629 case 4: /* PIO Data-in */ 2630 case 5: /* PIO Data-out */ 2631 return ATA_PROT_PIO; 2632 2633 case 0: /* Hard Reset */ 2634 case 1: /* SRST */ 2635 case 8: /* Device Diagnostic */ 2636 case 9: /* Device Reset */ 2637 case 7: /* DMA Queued */ 2638 case 12: /* FPDMA */ 2639 case 15: /* Return Response Info */ 2640 default: /* Reserved */ 2641 break; 2642 } 2643 2644 return ATA_PROT_UNKNOWN; 2645 } 2646 2647 /** 2648 * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile 2649 * @qc: command structure to be initialized 2650 * 2651 * Handles either 12 or 16-byte versions of the CDB. 2652 * 2653 * RETURNS: 2654 * Zero on success, non-zero on failure. 2655 */ 2656 static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) 2657 { 2658 struct ata_taskfile *tf = &(qc->tf); 2659 struct scsi_cmnd *scmd = qc->scsicmd; 2660 struct ata_device *dev = qc->dev; 2661 const u8 *cdb = scmd->cmnd; 2662 2663 if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) 2664 goto invalid_fld; 2665 2666 /* 2667 * Filter TPM commands by default. These provide an 2668 * essentially uncontrolled encrypted "back door" between 2669 * applications and the disk. Set libata.allow_tpm=1 if you 2670 * have a real reason for wanting to use them. This ensures 2671 * that installed software cannot easily mess stuff up without 2672 * user intent. DVR type users will probably ship with this enabled 2673 * for movie content management. 2674 * 2675 * Note that for ATA8 we can issue a DCS change and DCS freeze lock 2676 * for this and should do in future but that it is not sufficient as 2677 * DCS is an optional feature set. Thus we also do the software filter 2678 * so that we comply with the TC consortium stated goal that the user 2679 * can turn off TC features of their system. 2680 */ 2681 if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm) 2682 goto invalid_fld; 2683 2684 /* We may not issue DMA commands if no DMA mode is set */ 2685 if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) 2686 goto invalid_fld; 2687 2688 /* 2689 * 12 and 16 byte CDBs use different offsets to 2690 * provide the various register values. 2691 */ 2692 if (cdb[0] == ATA_16) { 2693 /* 2694 * 16-byte CDB - may contain extended commands. 2695 * 2696 * If that is the case, copy the upper byte register values. 2697 */ 2698 if (cdb[1] & 0x01) { 2699 tf->hob_feature = cdb[3]; 2700 tf->hob_nsect = cdb[5]; 2701 tf->hob_lbal = cdb[7]; 2702 tf->hob_lbam = cdb[9]; 2703 tf->hob_lbah = cdb[11]; 2704 tf->flags |= ATA_TFLAG_LBA48; 2705 } else 2706 tf->flags &= ~ATA_TFLAG_LBA48; 2707 2708 /* 2709 * Always copy low byte, device and command registers. 2710 */ 2711 tf->feature = cdb[4]; 2712 tf->nsect = cdb[6]; 2713 tf->lbal = cdb[8]; 2714 tf->lbam = cdb[10]; 2715 tf->lbah = cdb[12]; 2716 tf->device = cdb[13]; 2717 tf->command = cdb[14]; 2718 } else { 2719 /* 2720 * 12-byte CDB - incapable of extended commands. 2721 */ 2722 tf->flags &= ~ATA_TFLAG_LBA48; 2723 2724 tf->feature = cdb[3]; 2725 tf->nsect = cdb[4]; 2726 tf->lbal = cdb[5]; 2727 tf->lbam = cdb[6]; 2728 tf->lbah = cdb[7]; 2729 tf->device = cdb[8]; 2730 tf->command = cdb[9]; 2731 } 2732 2733 /* enforce correct master/slave bit */ 2734 tf->device = dev->devno ? 2735 tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; 2736 2737 /* sanity check for pio multi commands */ 2738 if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) 2739 goto invalid_fld; 2740 2741 if (is_multi_taskfile(tf)) { 2742 unsigned int multi_count = 1 << (cdb[1] >> 5); 2743 2744 /* compare the passed through multi_count 2745 * with the cached multi_count of libata 2746 */ 2747 if (multi_count != dev->multi_count) 2748 ata_dev_printk(dev, KERN_WARNING, 2749 "invalid multi_count %u ignored\n", 2750 multi_count); 2751 } 2752 2753 /* READ/WRITE LONG use a non-standard sect_size */ 2754 qc->sect_size = ATA_SECT_SIZE; 2755 switch (tf->command) { 2756 case ATA_CMD_READ_LONG: 2757 case ATA_CMD_READ_LONG_ONCE: 2758 case ATA_CMD_WRITE_LONG: 2759 case ATA_CMD_WRITE_LONG_ONCE: 2760 if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1) 2761 goto invalid_fld; 2762 qc->sect_size = scsi_bufflen(scmd); 2763 } 2764 2765 /* 2766 * Filter SET_FEATURES - XFER MODE command -- otherwise, 2767 * SET_FEATURES - XFER MODE must be preceded/succeeded 2768 * by an update to hardware-specific registers for each 2769 * controller (i.e. the reason for ->set_piomode(), 2770 * ->set_dmamode(), and ->post_set_mode() hooks). 2771 */ 2772 if ((tf->command == ATA_CMD_SET_FEATURES) 2773 && (tf->feature == SETFEATURES_XFER)) 2774 goto invalid_fld; 2775 2776 /* 2777 * Set flags so that all registers will be written, 2778 * and pass on write indication (used for PIO/DMA 2779 * setup.) 2780 */ 2781 tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); 2782 2783 if (scmd->sc_data_direction == DMA_TO_DEVICE) 2784 tf->flags |= ATA_TFLAG_WRITE; 2785 2786 /* 2787 * Set transfer length. 2788 * 2789 * TODO: find out if we need to do more here to 2790 * cover scatter/gather case. 2791 */ 2792 ata_qc_set_pc_nbytes(qc); 2793 2794 /* request result TF and be quiet about device error */ 2795 qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET; 2796 2797 return 0; 2798 2799 invalid_fld: 2800 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00); 2801 /* "Invalid field in cdb" */ 2802 return 1; 2803 } 2804 2805 /** 2806 * ata_get_xlat_func - check if SCSI to ATA translation is possible 2807 * @dev: ATA device 2808 * @cmd: SCSI command opcode to consider 2809 * 2810 * Look up the SCSI command given, and determine whether the 2811 * SCSI command is to be translated or simulated. 2812 * 2813 * RETURNS: 2814 * Pointer to translation function if possible, %NULL if not. 2815 */ 2816 2817 static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) 2818 { 2819 switch (cmd) { 2820 case READ_6: 2821 case READ_10: 2822 case READ_16: 2823 2824 case WRITE_6: 2825 case WRITE_10: 2826 case WRITE_16: 2827 return ata_scsi_rw_xlat; 2828 2829 case SYNCHRONIZE_CACHE: 2830 if (ata_try_flush_cache(dev)) 2831 return ata_scsi_flush_xlat; 2832 break; 2833 2834 case VERIFY: 2835 case VERIFY_16: 2836 return ata_scsi_verify_xlat; 2837 2838 case ATA_12: 2839 case ATA_16: 2840 return ata_scsi_pass_thru; 2841 2842 case START_STOP: 2843 return ata_scsi_start_stop_xlat; 2844 } 2845 2846 return NULL; 2847 } 2848 2849 /** 2850 * ata_scsi_dump_cdb - dump SCSI command contents to dmesg 2851 * @ap: ATA port to which the command was being sent 2852 * @cmd: SCSI command to dump 2853 * 2854 * Prints the contents of a SCSI command via printk(). 2855 */ 2856 2857 static inline void ata_scsi_dump_cdb(struct ata_port *ap, 2858 struct scsi_cmnd *cmd) 2859 { 2860 #ifdef ATA_DEBUG 2861 struct scsi_device *scsidev = cmd->device; 2862 u8 *scsicmd = cmd->cmnd; 2863 2864 DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", 2865 ap->print_id, 2866 scsidev->channel, scsidev->id, scsidev->lun, 2867 scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], 2868 scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], 2869 scsicmd[8]); 2870 #endif 2871 } 2872 2873 static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, 2874 void (*done)(struct scsi_cmnd *), 2875 struct ata_device *dev) 2876 { 2877 u8 scsi_op = scmd->cmnd[0]; 2878 ata_xlat_func_t xlat_func; 2879 int rc = 0; 2880 2881 if (dev->class == ATA_DEV_ATA) { 2882 if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) 2883 goto bad_cdb_len; 2884 2885 xlat_func = ata_get_xlat_func(dev, scsi_op); 2886 } else { 2887 if (unlikely(!scmd->cmd_len)) 2888 goto bad_cdb_len; 2889 2890 xlat_func = NULL; 2891 if (likely((scsi_op != ATA_16) || !atapi_passthru16)) { 2892 /* relay SCSI command to ATAPI device */ 2893 int len = COMMAND_SIZE(scsi_op); 2894 if (unlikely(len > scmd->cmd_len || len > dev->cdb_len)) 2895 goto bad_cdb_len; 2896 2897 xlat_func = atapi_xlat; 2898 } else { 2899 /* ATA_16 passthru, treat as an ATA command */ 2900 if (unlikely(scmd->cmd_len > 16)) 2901 goto bad_cdb_len; 2902 2903 xlat_func = ata_get_xlat_func(dev, scsi_op); 2904 } 2905 } 2906 2907 if (xlat_func) 2908 rc = ata_scsi_translate(dev, scmd, done, xlat_func); 2909 else 2910 ata_scsi_simulate(dev, scmd, done); 2911 2912 return rc; 2913 2914 bad_cdb_len: 2915 DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n", 2916 scmd->cmd_len, scsi_op, dev->cdb_len); 2917 scmd->result = DID_ERROR << 16; 2918 done(scmd); 2919 return 0; 2920 } 2921 2922 /** 2923 * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device 2924 * @cmd: SCSI command to be sent 2925 * @done: Completion function, called when command is complete 2926 * 2927 * In some cases, this function translates SCSI commands into 2928 * ATA taskfiles, and queues the taskfiles to be sent to 2929 * hardware. In other cases, this function simulates a 2930 * SCSI device by evaluating and responding to certain 2931 * SCSI commands. This creates the overall effect of 2932 * ATA and ATAPI devices appearing as SCSI devices. 2933 * 2934 * LOCKING: 2935 * Releases scsi-layer-held lock, and obtains host lock. 2936 * 2937 * RETURNS: 2938 * Return value from __ata_scsi_queuecmd() if @cmd can be queued, 2939 * 0 otherwise. 2940 */ 2941 int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) 2942 { 2943 struct ata_port *ap; 2944 struct ata_device *dev; 2945 struct scsi_device *scsidev = cmd->device; 2946 struct Scsi_Host *shost = scsidev->host; 2947 int rc = 0; 2948 2949 ap = ata_shost_to_port(shost); 2950 2951 spin_unlock(shost->host_lock); 2952 spin_lock(ap->lock); 2953 2954 ata_scsi_dump_cdb(ap, cmd); 2955 2956 dev = ata_scsi_find_dev(ap, scsidev); 2957 if (likely(dev)) 2958 rc = __ata_scsi_queuecmd(cmd, done, dev); 2959 else { 2960 cmd->result = (DID_BAD_TARGET << 16); 2961 done(cmd); 2962 } 2963 2964 spin_unlock(ap->lock); 2965 spin_lock(shost->host_lock); 2966 return rc; 2967 } 2968 2969 /** 2970 * ata_scsi_simulate - simulate SCSI command on ATA device 2971 * @dev: the target device 2972 * @cmd: SCSI command being sent to device. 2973 * @done: SCSI command completion function. 2974 * 2975 * Interprets and directly executes a select list of SCSI commands 2976 * that can be handled internally. 2977 * 2978 * LOCKING: 2979 * spin_lock_irqsave(host lock) 2980 */ 2981 2982 void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, 2983 void (*done)(struct scsi_cmnd *)) 2984 { 2985 struct ata_scsi_args args; 2986 const u8 *scsicmd = cmd->cmnd; 2987 u8 tmp8; 2988 2989 args.dev = dev; 2990 args.id = dev->id; 2991 args.cmd = cmd; 2992 args.done = done; 2993 2994 switch(scsicmd[0]) { 2995 /* TODO: worth improving? */ 2996 case FORMAT_UNIT: 2997 ata_scsi_invalid_field(cmd, done); 2998 break; 2999 3000 case INQUIRY: 3001 if (scsicmd[1] & 2) /* is CmdDt set? */ 3002 ata_scsi_invalid_field(cmd, done); 3003 else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ 3004 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); 3005 else switch (scsicmd[2]) { 3006 case 0x00: 3007 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); 3008 break; 3009 case 0x80: 3010 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); 3011 break; 3012 case 0x83: 3013 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); 3014 break; 3015 case 0x89: 3016 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); 3017 break; 3018 case 0xb1: 3019 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); 3020 break; 3021 default: 3022 ata_scsi_invalid_field(cmd, done); 3023 break; 3024 } 3025 break; 3026 3027 case MODE_SENSE: 3028 case MODE_SENSE_10: 3029 ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); 3030 break; 3031 3032 case MODE_SELECT: /* unconditionally return */ 3033 case MODE_SELECT_10: /* bad-field-in-cdb */ 3034 ata_scsi_invalid_field(cmd, done); 3035 break; 3036 3037 case READ_CAPACITY: 3038 ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); 3039 break; 3040 3041 case SERVICE_ACTION_IN: 3042 if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) 3043 ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); 3044 else 3045 ata_scsi_invalid_field(cmd, done); 3046 break; 3047 3048 case REPORT_LUNS: 3049 ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); 3050 break; 3051 3052 case REQUEST_SENSE: 3053 ata_scsi_set_sense(cmd, 0, 0, 0); 3054 cmd->result = (DRIVER_SENSE << 24); 3055 done(cmd); 3056 break; 3057 3058 /* if we reach this, then writeback caching is disabled, 3059 * turning this into a no-op. 3060 */ 3061 case SYNCHRONIZE_CACHE: 3062 /* fall through */ 3063 3064 /* no-op's, complete with success */ 3065 case REZERO_UNIT: 3066 case SEEK_6: 3067 case SEEK_10: 3068 case TEST_UNIT_READY: 3069 ata_scsi_rbuf_fill(&args, ata_scsiop_noop); 3070 break; 3071 3072 case SEND_DIAGNOSTIC: 3073 tmp8 = scsicmd[1] & ~(1 << 3); 3074 if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4])) 3075 ata_scsi_rbuf_fill(&args, ata_scsiop_noop); 3076 else 3077 ata_scsi_invalid_field(cmd, done); 3078 break; 3079 3080 /* all other commands */ 3081 default: 3082 ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); 3083 /* "Invalid command operation code" */ 3084 done(cmd); 3085 break; 3086 } 3087 } 3088 3089 int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) 3090 { 3091 int i, rc; 3092 3093 for (i = 0; i < host->n_ports; i++) { 3094 struct ata_port *ap = host->ports[i]; 3095 struct Scsi_Host *shost; 3096 3097 rc = -ENOMEM; 3098 shost = scsi_host_alloc(sht, sizeof(struct ata_port *)); 3099 if (!shost) 3100 goto err_alloc; 3101 3102 *(struct ata_port **)&shost->hostdata[0] = ap; 3103 ap->scsi_host = shost; 3104 3105 shost->transportt = &ata_scsi_transport_template; 3106 shost->unique_id = ap->print_id; 3107 shost->max_id = 16; 3108 shost->max_lun = 1; 3109 shost->max_channel = 1; 3110 shost->max_cmd_len = 16; 3111 3112 /* Schedule policy is determined by ->qc_defer() 3113 * callback and it needs to see every deferred qc. 3114 * Set host_blocked to 1 to prevent SCSI midlayer from 3115 * automatically deferring requests. 3116 */ 3117 shost->max_host_blocked = 1; 3118 3119 rc = scsi_add_host(ap->scsi_host, ap->host->dev); 3120 if (rc) 3121 goto err_add; 3122 } 3123 3124 return 0; 3125 3126 err_add: 3127 scsi_host_put(host->ports[i]->scsi_host); 3128 err_alloc: 3129 while (--i >= 0) { 3130 struct Scsi_Host *shost = host->ports[i]->scsi_host; 3131 3132 scsi_remove_host(shost); 3133 scsi_host_put(shost); 3134 } 3135 return rc; 3136 } 3137 3138 void ata_scsi_scan_host(struct ata_port *ap, int sync) 3139 { 3140 int tries = 5; 3141 struct ata_device *last_failed_dev = NULL; 3142 struct ata_link *link; 3143 struct ata_device *dev; 3144 3145 if (ap->flags & ATA_FLAG_DISABLED) 3146 return; 3147 3148 repeat: 3149 ata_port_for_each_link(link, ap) { 3150 ata_link_for_each_dev(dev, link) { 3151 struct scsi_device *sdev; 3152 int channel = 0, id = 0; 3153 3154 if (!ata_dev_enabled(dev) || dev->sdev) 3155 continue; 3156 3157 if (ata_is_host_link(link)) 3158 id = dev->devno; 3159 else 3160 channel = link->pmp; 3161 3162 sdev = __scsi_add_device(ap->scsi_host, channel, id, 0, 3163 NULL); 3164 if (!IS_ERR(sdev)) { 3165 dev->sdev = sdev; 3166 scsi_device_put(sdev); 3167 } 3168 } 3169 } 3170 3171 /* If we scanned while EH was in progress or allocation 3172 * failure occurred, scan would have failed silently. Check 3173 * whether all devices are attached. 3174 */ 3175 ata_port_for_each_link(link, ap) { 3176 ata_link_for_each_dev(dev, link) { 3177 if (ata_dev_enabled(dev) && !dev->sdev) 3178 goto exit_loop; 3179 } 3180 } 3181 exit_loop: 3182 if (!link) 3183 return; 3184 3185 /* we're missing some SCSI devices */ 3186 if (sync) { 3187 /* If caller requested synchrnous scan && we've made 3188 * any progress, sleep briefly and repeat. 3189 */ 3190 if (dev != last_failed_dev) { 3191 msleep(100); 3192 last_failed_dev = dev; 3193 goto repeat; 3194 } 3195 3196 /* We might be failing to detect boot device, give it 3197 * a few more chances. 3198 */ 3199 if (--tries) { 3200 msleep(100); 3201 goto repeat; 3202 } 3203 3204 ata_port_printk(ap, KERN_ERR, "WARNING: synchronous SCSI scan " 3205 "failed without making any progress,\n" 3206 " switching to async\n"); 3207 } 3208 3209 queue_delayed_work(ata_aux_wq, &ap->hotplug_task, 3210 round_jiffies_relative(HZ)); 3211 } 3212 3213 /** 3214 * ata_scsi_offline_dev - offline attached SCSI device 3215 * @dev: ATA device to offline attached SCSI device for 3216 * 3217 * This function is called from ata_eh_hotplug() and responsible 3218 * for taking the SCSI device attached to @dev offline. This 3219 * function is called with host lock which protects dev->sdev 3220 * against clearing. 3221 * 3222 * LOCKING: 3223 * spin_lock_irqsave(host lock) 3224 * 3225 * RETURNS: 3226 * 1 if attached SCSI device exists, 0 otherwise. 3227 */ 3228 int ata_scsi_offline_dev(struct ata_device *dev) 3229 { 3230 if (dev->sdev) { 3231 scsi_device_set_state(dev->sdev, SDEV_OFFLINE); 3232 return 1; 3233 } 3234 return 0; 3235 } 3236 3237 /** 3238 * ata_scsi_remove_dev - remove attached SCSI device 3239 * @dev: ATA device to remove attached SCSI device for 3240 * 3241 * This function is called from ata_eh_scsi_hotplug() and 3242 * responsible for removing the SCSI device attached to @dev. 3243 * 3244 * LOCKING: 3245 * Kernel thread context (may sleep). 3246 */ 3247 static void ata_scsi_remove_dev(struct ata_device *dev) 3248 { 3249 struct ata_port *ap = dev->link->ap; 3250 struct scsi_device *sdev; 3251 unsigned long flags; 3252 3253 /* Alas, we need to grab scan_mutex to ensure SCSI device 3254 * state doesn't change underneath us and thus 3255 * scsi_device_get() always succeeds. The mutex locking can 3256 * be removed if there is __scsi_device_get() interface which 3257 * increments reference counts regardless of device state. 3258 */ 3259 mutex_lock(&ap->scsi_host->scan_mutex); 3260 spin_lock_irqsave(ap->lock, flags); 3261 3262 /* clearing dev->sdev is protected by host lock */ 3263 sdev = dev->sdev; 3264 dev->sdev = NULL; 3265 3266 if (sdev) { 3267 /* If user initiated unplug races with us, sdev can go 3268 * away underneath us after the host lock and 3269 * scan_mutex are released. Hold onto it. 3270 */ 3271 if (scsi_device_get(sdev) == 0) { 3272 /* The following ensures the attached sdev is 3273 * offline on return from ata_scsi_offline_dev() 3274 * regardless it wins or loses the race 3275 * against this function. 3276 */ 3277 scsi_device_set_state(sdev, SDEV_OFFLINE); 3278 } else { 3279 WARN_ON(1); 3280 sdev = NULL; 3281 } 3282 } 3283 3284 spin_unlock_irqrestore(ap->lock, flags); 3285 mutex_unlock(&ap->scsi_host->scan_mutex); 3286 3287 if (sdev) { 3288 ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", 3289 sdev->sdev_gendev.bus_id); 3290 3291 scsi_remove_device(sdev); 3292 scsi_device_put(sdev); 3293 } 3294 } 3295 3296 static void ata_scsi_handle_link_detach(struct ata_link *link) 3297 { 3298 struct ata_port *ap = link->ap; 3299 struct ata_device *dev; 3300 3301 ata_link_for_each_dev(dev, link) { 3302 unsigned long flags; 3303 3304 if (!(dev->flags & ATA_DFLAG_DETACHED)) 3305 continue; 3306 3307 spin_lock_irqsave(ap->lock, flags); 3308 dev->flags &= ~ATA_DFLAG_DETACHED; 3309 spin_unlock_irqrestore(ap->lock, flags); 3310 3311 ata_scsi_remove_dev(dev); 3312 } 3313 } 3314 3315 /** 3316 * ata_scsi_media_change_notify - send media change event 3317 * @dev: Pointer to the disk device with media change event 3318 * 3319 * Tell the block layer to send a media change notification 3320 * event. 3321 * 3322 * LOCKING: 3323 * spin_lock_irqsave(host lock) 3324 */ 3325 void ata_scsi_media_change_notify(struct ata_device *dev) 3326 { 3327 if (dev->sdev) 3328 sdev_evt_send_simple(dev->sdev, SDEV_EVT_MEDIA_CHANGE, 3329 GFP_ATOMIC); 3330 } 3331 3332 /** 3333 * ata_scsi_hotplug - SCSI part of hotplug 3334 * @work: Pointer to ATA port to perform SCSI hotplug on 3335 * 3336 * Perform SCSI part of hotplug. It's executed from a separate 3337 * workqueue after EH completes. This is necessary because SCSI 3338 * hot plugging requires working EH and hot unplugging is 3339 * synchronized with hot plugging with a mutex. 3340 * 3341 * LOCKING: 3342 * Kernel thread context (may sleep). 3343 */ 3344 void ata_scsi_hotplug(struct work_struct *work) 3345 { 3346 struct ata_port *ap = 3347 container_of(work, struct ata_port, hotplug_task.work); 3348 int i; 3349 3350 if (ap->pflags & ATA_PFLAG_UNLOADING) { 3351 DPRINTK("ENTER/EXIT - unloading\n"); 3352 return; 3353 } 3354 3355 DPRINTK("ENTER\n"); 3356 3357 /* Unplug detached devices. We cannot use link iterator here 3358 * because PMP links have to be scanned even if PMP is 3359 * currently not attached. Iterate manually. 3360 */ 3361 ata_scsi_handle_link_detach(&ap->link); 3362 if (ap->pmp_link) 3363 for (i = 0; i < SATA_PMP_MAX_PORTS; i++) 3364 ata_scsi_handle_link_detach(&ap->pmp_link[i]); 3365 3366 /* scan for new ones */ 3367 ata_scsi_scan_host(ap, 0); 3368 3369 DPRINTK("EXIT\n"); 3370 } 3371 3372 /** 3373 * ata_scsi_user_scan - indication for user-initiated bus scan 3374 * @shost: SCSI host to scan 3375 * @channel: Channel to scan 3376 * @id: ID to scan 3377 * @lun: LUN to scan 3378 * 3379 * This function is called when user explicitly requests bus 3380 * scan. Set probe pending flag and invoke EH. 3381 * 3382 * LOCKING: 3383 * SCSI layer (we don't care) 3384 * 3385 * RETURNS: 3386 * Zero. 3387 */ 3388 static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, 3389 unsigned int id, unsigned int lun) 3390 { 3391 struct ata_port *ap = ata_shost_to_port(shost); 3392 unsigned long flags; 3393 int devno, rc = 0; 3394 3395 if (!ap->ops->error_handler) 3396 return -EOPNOTSUPP; 3397 3398 if (lun != SCAN_WILD_CARD && lun) 3399 return -EINVAL; 3400 3401 if (!sata_pmp_attached(ap)) { 3402 if (channel != SCAN_WILD_CARD && channel) 3403 return -EINVAL; 3404 devno = id; 3405 } else { 3406 if (id != SCAN_WILD_CARD && id) 3407 return -EINVAL; 3408 devno = channel; 3409 } 3410 3411 spin_lock_irqsave(ap->lock, flags); 3412 3413 if (devno == SCAN_WILD_CARD) { 3414 struct ata_link *link; 3415 3416 ata_port_for_each_link(link, ap) { 3417 struct ata_eh_info *ehi = &link->eh_info; 3418 ehi->probe_mask |= ATA_ALL_DEVICES; 3419 ehi->action |= ATA_EH_RESET; 3420 } 3421 } else { 3422 struct ata_device *dev = ata_find_dev(ap, devno); 3423 3424 if (dev) { 3425 struct ata_eh_info *ehi = &dev->link->eh_info; 3426 ehi->probe_mask |= 1 << dev->devno; 3427 ehi->action |= ATA_EH_RESET; 3428 } else 3429 rc = -EINVAL; 3430 } 3431 3432 if (rc == 0) { 3433 ata_port_schedule_eh(ap); 3434 spin_unlock_irqrestore(ap->lock, flags); 3435 ata_port_wait_eh(ap); 3436 } else 3437 spin_unlock_irqrestore(ap->lock, flags); 3438 3439 return rc; 3440 } 3441 3442 /** 3443 * ata_scsi_dev_rescan - initiate scsi_rescan_device() 3444 * @work: Pointer to ATA port to perform scsi_rescan_device() 3445 * 3446 * After ATA pass thru (SAT) commands are executed successfully, 3447 * libata need to propagate the changes to SCSI layer. This 3448 * function must be executed from ata_aux_wq such that sdev 3449 * attach/detach don't race with rescan. 3450 * 3451 * LOCKING: 3452 * Kernel thread context (may sleep). 3453 */ 3454 void ata_scsi_dev_rescan(struct work_struct *work) 3455 { 3456 struct ata_port *ap = 3457 container_of(work, struct ata_port, scsi_rescan_task); 3458 struct ata_link *link; 3459 struct ata_device *dev; 3460 unsigned long flags; 3461 3462 spin_lock_irqsave(ap->lock, flags); 3463 3464 ata_port_for_each_link(link, ap) { 3465 ata_link_for_each_dev(dev, link) { 3466 struct scsi_device *sdev = dev->sdev; 3467 3468 if (!ata_dev_enabled(dev) || !sdev) 3469 continue; 3470 if (scsi_device_get(sdev)) 3471 continue; 3472 3473 spin_unlock_irqrestore(ap->lock, flags); 3474 scsi_rescan_device(&(sdev->sdev_gendev)); 3475 scsi_device_put(sdev); 3476 spin_lock_irqsave(ap->lock, flags); 3477 } 3478 } 3479 3480 spin_unlock_irqrestore(ap->lock, flags); 3481 } 3482 3483 /** 3484 * ata_sas_port_alloc - Allocate port for a SAS attached SATA device 3485 * @host: ATA host container for all SAS ports 3486 * @port_info: Information from low-level host driver 3487 * @shost: SCSI host that the scsi device is attached to 3488 * 3489 * LOCKING: 3490 * PCI/etc. bus probe sem. 3491 * 3492 * RETURNS: 3493 * ata_port pointer on success / NULL on failure. 3494 */ 3495 3496 struct ata_port *ata_sas_port_alloc(struct ata_host *host, 3497 struct ata_port_info *port_info, 3498 struct Scsi_Host *shost) 3499 { 3500 struct ata_port *ap; 3501 3502 ap = ata_port_alloc(host); 3503 if (!ap) 3504 return NULL; 3505 3506 ap->port_no = 0; 3507 ap->lock = shost->host_lock; 3508 ap->pio_mask = port_info->pio_mask; 3509 ap->mwdma_mask = port_info->mwdma_mask; 3510 ap->udma_mask = port_info->udma_mask; 3511 ap->flags |= port_info->flags; 3512 ap->ops = port_info->port_ops; 3513 ap->cbl = ATA_CBL_SATA; 3514 3515 return ap; 3516 } 3517 EXPORT_SYMBOL_GPL(ata_sas_port_alloc); 3518 3519 /** 3520 * ata_sas_port_start - Set port up for dma. 3521 * @ap: Port to initialize 3522 * 3523 * Called just after data structures for each port are 3524 * initialized. 3525 * 3526 * May be used as the port_start() entry in ata_port_operations. 3527 * 3528 * LOCKING: 3529 * Inherited from caller. 3530 */ 3531 int ata_sas_port_start(struct ata_port *ap) 3532 { 3533 return 0; 3534 } 3535 EXPORT_SYMBOL_GPL(ata_sas_port_start); 3536 3537 /** 3538 * ata_port_stop - Undo ata_sas_port_start() 3539 * @ap: Port to shut down 3540 * 3541 * May be used as the port_stop() entry in ata_port_operations. 3542 * 3543 * LOCKING: 3544 * Inherited from caller. 3545 */ 3546 3547 void ata_sas_port_stop(struct ata_port *ap) 3548 { 3549 } 3550 EXPORT_SYMBOL_GPL(ata_sas_port_stop); 3551 3552 /** 3553 * ata_sas_port_init - Initialize a SATA device 3554 * @ap: SATA port to initialize 3555 * 3556 * LOCKING: 3557 * PCI/etc. bus probe sem. 3558 * 3559 * RETURNS: 3560 * Zero on success, non-zero on error. 3561 */ 3562 3563 int ata_sas_port_init(struct ata_port *ap) 3564 { 3565 int rc = ap->ops->port_start(ap); 3566 3567 if (!rc) { 3568 ap->print_id = ata_print_id++; 3569 rc = ata_bus_probe(ap); 3570 } 3571 3572 return rc; 3573 } 3574 EXPORT_SYMBOL_GPL(ata_sas_port_init); 3575 3576 /** 3577 * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc 3578 * @ap: SATA port to destroy 3579 * 3580 */ 3581 3582 void ata_sas_port_destroy(struct ata_port *ap) 3583 { 3584 if (ap->ops->port_stop) 3585 ap->ops->port_stop(ap); 3586 kfree(ap); 3587 } 3588 EXPORT_SYMBOL_GPL(ata_sas_port_destroy); 3589 3590 /** 3591 * ata_sas_slave_configure - Default slave_config routine for libata devices 3592 * @sdev: SCSI device to configure 3593 * @ap: ATA port to which SCSI device is attached 3594 * 3595 * RETURNS: 3596 * Zero. 3597 */ 3598 3599 int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) 3600 { 3601 ata_scsi_sdev_config(sdev); 3602 ata_scsi_dev_config(sdev, ap->link.device); 3603 return 0; 3604 } 3605 EXPORT_SYMBOL_GPL(ata_sas_slave_configure); 3606 3607 /** 3608 * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device 3609 * @cmd: SCSI command to be sent 3610 * @done: Completion function, called when command is complete 3611 * @ap: ATA port to which the command is being sent 3612 * 3613 * RETURNS: 3614 * Return value from __ata_scsi_queuecmd() if @cmd can be queued, 3615 * 0 otherwise. 3616 */ 3617 3618 int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), 3619 struct ata_port *ap) 3620 { 3621 int rc = 0; 3622 3623 ata_scsi_dump_cdb(ap, cmd); 3624 3625 if (likely(ata_scsi_dev_enabled(ap->link.device))) 3626 rc = __ata_scsi_queuecmd(cmd, done, ap->link.device); 3627 else { 3628 cmd->result = (DID_BAD_TARGET << 16); 3629 done(cmd); 3630 } 3631 return rc; 3632 } 3633 EXPORT_SYMBOL_GPL(ata_sas_queuecmd); 3634