xref: /openbmc/linux/drivers/ata/ahci_qoriq.c (revision edf2e1d2)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Freescale QorIQ AHCI SATA platform driver
4  *
5  * Copyright 2015 Freescale, Inc.
6  *   Tang Yuantian <Yuantian.Tang@freescale.com>
7  */
8 
9 #include <linux/acpi.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/pm.h>
13 #include <linux/ahci_platform.h>
14 #include <linux/device.h>
15 #include <linux/of_address.h>
16 #include <linux/of.h>
17 #include <linux/of_device.h>
18 #include <linux/platform_device.h>
19 #include <linux/libata.h>
20 #include "ahci.h"
21 
22 #define DRV_NAME "ahci-qoriq"
23 
24 /* port register definition */
25 #define PORT_PHY1	0xA8
26 #define PORT_PHY2	0xAC
27 #define PORT_PHY3	0xB0
28 #define PORT_PHY4	0xB4
29 #define PORT_PHY5	0xB8
30 #define PORT_AXICC	0xBC
31 #define PORT_TRANS	0xC8
32 
33 /* port register default value */
34 #define AHCI_PORT_PHY_1_CFG	0xa003fffe
35 #define AHCI_PORT_PHY2_CFG	0x28184d1f
36 #define AHCI_PORT_PHY3_CFG	0x0e081509
37 #define AHCI_PORT_TRANS_CFG	0x08000029
38 #define AHCI_PORT_AXICC_CFG	0x3fffffff
39 
40 /* for ls1021a */
41 #define LS1021A_PORT_PHY2	0x28183414
42 #define LS1021A_PORT_PHY3	0x0e080e06
43 #define LS1021A_PORT_PHY4	0x064a080b
44 #define LS1021A_PORT_PHY5	0x2aa86470
45 #define LS1021A_AXICC_ADDR	0xC0
46 
47 #define SATA_ECC_DISABLE	0x00020000
48 #define ECC_DIS_ARMV8_CH2	0x80000000
49 #define ECC_DIS_LS1088A		0x40000000
50 
51 enum ahci_qoriq_type {
52 	AHCI_LS1021A,
53 	AHCI_LS1028A,
54 	AHCI_LS1043A,
55 	AHCI_LS2080A,
56 	AHCI_LS1046A,
57 	AHCI_LS1088A,
58 	AHCI_LS2088A,
59 	AHCI_LX2160A,
60 };
61 
62 struct ahci_qoriq_priv {
63 	struct ccsr_ahci *reg_base;
64 	enum ahci_qoriq_type type;
65 	void __iomem *ecc_addr;
66 	bool is_dmacoherent;
67 };
68 
69 static bool ecc_initialized;
70 
71 static const struct of_device_id ahci_qoriq_of_match[] = {
72 	{ .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
73 	{ .compatible = "fsl,ls1028a-ahci", .data = (void *)AHCI_LS1028A},
74 	{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
75 	{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
76 	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
77 	{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
78 	{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
79 	{ .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A},
80 	{ /* sentinel */ }
81 };
82 MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
83 
84 static const struct acpi_device_id ahci_qoriq_acpi_match[] = {
85 	{"NXP0004", .driver_data = (kernel_ulong_t)AHCI_LX2160A},
86 	{ }
87 };
88 MODULE_DEVICE_TABLE(acpi, ahci_qoriq_acpi_match);
89 
90 static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
91 			  unsigned long deadline)
92 {
93 	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
94 	void __iomem *port_mmio = ahci_port_base(link->ap);
95 	u32 px_cmd, px_is, px_val;
96 	struct ata_port *ap = link->ap;
97 	struct ahci_port_priv *pp = ap->private_data;
98 	struct ahci_host_priv *hpriv = ap->host->private_data;
99 	struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data;
100 	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
101 	struct ata_taskfile tf;
102 	bool online;
103 	int rc;
104 	bool ls1021a_workaround = (qoriq_priv->type == AHCI_LS1021A);
105 
106 	hpriv->stop_engine(ap);
107 
108 	/*
109 	 * There is a errata on ls1021a Rev1.0 and Rev2.0 which is:
110 	 * A-009042: The device detection initialization sequence
111 	 * mistakenly resets some registers.
112 	 *
113 	 * Workaround for this is:
114 	 * The software should read and store PxCMD and PxIS values
115 	 * before issuing the device detection initialization sequence.
116 	 * After the sequence is complete, software should restore the
117 	 * PxCMD and PxIS with the stored values.
118 	 */
119 	if (ls1021a_workaround) {
120 		px_cmd = readl(port_mmio + PORT_CMD);
121 		px_is = readl(port_mmio + PORT_IRQ_STAT);
122 	}
123 
124 	/* clear D2H reception area to properly wait for D2H FIS */
125 	ata_tf_init(link->device, &tf);
126 	tf.status = ATA_BUSY;
127 	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
128 
129 	rc = sata_link_hardreset(link, timing, deadline, &online,
130 				 ahci_check_ready);
131 
132 	/* restore the PxCMD and PxIS on ls1021 */
133 	if (ls1021a_workaround) {
134 		px_val = readl(port_mmio + PORT_CMD);
135 		if (px_val != px_cmd)
136 			writel(px_cmd, port_mmio + PORT_CMD);
137 
138 		px_val = readl(port_mmio + PORT_IRQ_STAT);
139 		if (px_val != px_is)
140 			writel(px_is, port_mmio + PORT_IRQ_STAT);
141 	}
142 
143 	hpriv->start_engine(ap);
144 
145 	if (online)
146 		*class = ahci_dev_classify(ap);
147 	return rc;
148 }
149 
150 static struct ata_port_operations ahci_qoriq_ops = {
151 	.inherits	= &ahci_ops,
152 	.hardreset	= ahci_qoriq_hardreset,
153 };
154 
155 static const struct ata_port_info ahci_qoriq_port_info = {
156 	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
157 	.pio_mask	= ATA_PIO4,
158 	.udma_mask	= ATA_UDMA6,
159 	.port_ops	= &ahci_qoriq_ops,
160 };
161 
162 static const struct scsi_host_template ahci_qoriq_sht = {
163 	AHCI_SHT(DRV_NAME),
164 };
165 
166 static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
167 {
168 	struct ahci_qoriq_priv *qpriv = hpriv->plat_data;
169 	void __iomem *reg_base = hpriv->mmio;
170 
171 	switch (qpriv->type) {
172 	case AHCI_LS1021A:
173 		if (!(qpriv->ecc_addr || ecc_initialized))
174 			return -EINVAL;
175 		else if (qpriv->ecc_addr && !ecc_initialized)
176 			writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
177 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
178 		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
179 		writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3);
180 		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
181 		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
182 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
183 		if (qpriv->is_dmacoherent)
184 			writel(AHCI_PORT_AXICC_CFG,
185 					reg_base + LS1021A_AXICC_ADDR);
186 		break;
187 
188 	case AHCI_LS1043A:
189 		if (!(qpriv->ecc_addr || ecc_initialized))
190 			return -EINVAL;
191 		else if (qpriv->ecc_addr && !ecc_initialized)
192 			writel(readl(qpriv->ecc_addr) |
193 			       ECC_DIS_ARMV8_CH2,
194 			       qpriv->ecc_addr);
195 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
196 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
197 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
198 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
199 		if (qpriv->is_dmacoherent)
200 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
201 		break;
202 
203 	case AHCI_LS2080A:
204 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
205 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
206 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
207 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
208 		if (qpriv->is_dmacoherent)
209 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
210 		break;
211 
212 	case AHCI_LS1046A:
213 		if (!(qpriv->ecc_addr || ecc_initialized))
214 			return -EINVAL;
215 		else if (qpriv->ecc_addr && !ecc_initialized)
216 			writel(readl(qpriv->ecc_addr) |
217 			       ECC_DIS_ARMV8_CH2,
218 			       qpriv->ecc_addr);
219 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
220 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
221 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
222 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
223 		if (qpriv->is_dmacoherent)
224 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
225 		break;
226 
227 	case AHCI_LS1028A:
228 	case AHCI_LS1088A:
229 	case AHCI_LX2160A:
230 		if (!(qpriv->ecc_addr || ecc_initialized))
231 			return -EINVAL;
232 		else if (qpriv->ecc_addr && !ecc_initialized)
233 			writel(readl(qpriv->ecc_addr) |
234 			       ECC_DIS_LS1088A,
235 			       qpriv->ecc_addr);
236 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
237 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
238 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
239 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
240 		if (qpriv->is_dmacoherent)
241 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
242 		break;
243 
244 	case AHCI_LS2088A:
245 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
246 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
247 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
248 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
249 		if (qpriv->is_dmacoherent)
250 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
251 		break;
252 	}
253 
254 	ecc_initialized = true;
255 	return 0;
256 }
257 
258 static int ahci_qoriq_probe(struct platform_device *pdev)
259 {
260 	struct device_node *np = pdev->dev.of_node;
261 	const struct acpi_device_id *acpi_id;
262 	struct device *dev = &pdev->dev;
263 	struct ahci_host_priv *hpriv;
264 	struct ahci_qoriq_priv *qoriq_priv;
265 	const struct of_device_id *of_id;
266 	struct resource *res;
267 	int rc;
268 
269 	hpriv = ahci_platform_get_resources(pdev, 0);
270 	if (IS_ERR(hpriv))
271 		return PTR_ERR(hpriv);
272 
273 	of_id = of_match_node(ahci_qoriq_of_match, np);
274 	acpi_id = acpi_match_device(ahci_qoriq_acpi_match, &pdev->dev);
275 	if (!(of_id || acpi_id))
276 		return -ENODEV;
277 
278 	qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL);
279 	if (!qoriq_priv)
280 		return -ENOMEM;
281 
282 	if (of_id)
283 		qoriq_priv->type = (unsigned long)of_id->data;
284 	else
285 		qoriq_priv->type = (enum ahci_qoriq_type)acpi_id->driver_data;
286 
287 	if (unlikely(!ecc_initialized)) {
288 		res = platform_get_resource_byname(pdev,
289 						   IORESOURCE_MEM,
290 						   "sata-ecc");
291 		if (res) {
292 			qoriq_priv->ecc_addr =
293 				devm_ioremap_resource(dev, res);
294 			if (IS_ERR(qoriq_priv->ecc_addr))
295 				return PTR_ERR(qoriq_priv->ecc_addr);
296 		}
297 	}
298 
299 	if (device_get_dma_attr(&pdev->dev) == DEV_DMA_COHERENT)
300 		qoriq_priv->is_dmacoherent = true;
301 
302 	rc = ahci_platform_enable_resources(hpriv);
303 	if (rc)
304 		return rc;
305 
306 	hpriv->plat_data = qoriq_priv;
307 	rc = ahci_qoriq_phy_init(hpriv);
308 	if (rc)
309 		goto disable_resources;
310 
311 	rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info,
312 				     &ahci_qoriq_sht);
313 	if (rc)
314 		goto disable_resources;
315 
316 	return 0;
317 
318 disable_resources:
319 	ahci_platform_disable_resources(hpriv);
320 
321 	return rc;
322 }
323 
324 #ifdef CONFIG_PM_SLEEP
325 static int ahci_qoriq_resume(struct device *dev)
326 {
327 	struct ata_host *host = dev_get_drvdata(dev);
328 	struct ahci_host_priv *hpriv = host->private_data;
329 	int rc;
330 
331 	rc = ahci_platform_enable_resources(hpriv);
332 	if (rc)
333 		return rc;
334 
335 	rc = ahci_qoriq_phy_init(hpriv);
336 	if (rc)
337 		goto disable_resources;
338 
339 	rc = ahci_platform_resume_host(dev);
340 	if (rc)
341 		goto disable_resources;
342 
343 	/* We resumed so update PM runtime state */
344 	pm_runtime_disable(dev);
345 	pm_runtime_set_active(dev);
346 	pm_runtime_enable(dev);
347 
348 	return 0;
349 
350 disable_resources:
351 	ahci_platform_disable_resources(hpriv);
352 
353 	return rc;
354 }
355 #endif
356 
357 static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend,
358 			 ahci_qoriq_resume);
359 
360 static struct platform_driver ahci_qoriq_driver = {
361 	.probe = ahci_qoriq_probe,
362 	.remove = ata_platform_remove_one,
363 	.driver = {
364 		.name = DRV_NAME,
365 		.of_match_table = ahci_qoriq_of_match,
366 		.acpi_match_table = ahci_qoriq_acpi_match,
367 		.pm = &ahci_qoriq_pm_ops,
368 	},
369 };
370 module_platform_driver(ahci_qoriq_driver);
371 
372 MODULE_DESCRIPTION("Freescale QorIQ AHCI SATA platform driver");
373 MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>");
374 MODULE_LICENSE("GPL");
375