xref: /openbmc/linux/drivers/ata/ahci_imx.c (revision c819e2cf)
1 /*
2  * copyright (c) 2013 Freescale Semiconductor, Inc.
3  * Freescale IMX AHCI SATA platform driver
4  *
5  * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms and conditions of the GNU General Public License,
9  * version 2, as published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope it will be useful, but WITHOUT
12  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14  * more details.
15  *
16  * You should have received a copy of the GNU General Public License along with
17  * this program. If not, see <http://www.gnu.org/licenses/>.
18  */
19 
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/platform_device.h>
23 #include <linux/regmap.h>
24 #include <linux/ahci_platform.h>
25 #include <linux/of_device.h>
26 #include <linux/mfd/syscon.h>
27 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
28 #include <linux/libata.h>
29 #include "ahci.h"
30 
31 enum {
32 	/* Timer 1-ms Register */
33 	IMX_TIMER1MS				= 0x00e0,
34 	/* Port0 PHY Control Register */
35 	IMX_P0PHYCR				= 0x0178,
36 	IMX_P0PHYCR_TEST_PDDQ			= 1 << 20,
37 	IMX_P0PHYCR_CR_READ			= 1 << 19,
38 	IMX_P0PHYCR_CR_WRITE			= 1 << 18,
39 	IMX_P0PHYCR_CR_CAP_DATA			= 1 << 17,
40 	IMX_P0PHYCR_CR_CAP_ADDR			= 1 << 16,
41 	/* Port0 PHY Status Register */
42 	IMX_P0PHYSR				= 0x017c,
43 	IMX_P0PHYSR_CR_ACK			= 1 << 18,
44 	IMX_P0PHYSR_CR_DATA_OUT			= 0xffff << 0,
45 	/* Lane0 Output Status Register */
46 	IMX_LANE0_OUT_STAT			= 0x2003,
47 	IMX_LANE0_OUT_STAT_RX_PLL_STATE		= 1 << 1,
48 	/* Clock Reset Register */
49 	IMX_CLOCK_RESET				= 0x7f3f,
50 	IMX_CLOCK_RESET_RESET			= 1 << 0,
51 };
52 
53 enum ahci_imx_type {
54 	AHCI_IMX53,
55 	AHCI_IMX6Q,
56 };
57 
58 struct imx_ahci_priv {
59 	struct platform_device *ahci_pdev;
60 	enum ahci_imx_type type;
61 	struct clk *sata_clk;
62 	struct clk *sata_ref_clk;
63 	struct clk *ahb_clk;
64 	struct regmap *gpr;
65 	bool no_device;
66 	bool first_time;
67 	u32 phy_params;
68 };
69 
70 static int ahci_imx_hotplug;
71 module_param_named(hotplug, ahci_imx_hotplug, int, 0644);
72 MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)");
73 
74 static void ahci_imx_host_stop(struct ata_host *host);
75 
76 static int imx_phy_crbit_assert(void __iomem *mmio, u32 bit, bool assert)
77 {
78 	int timeout = 10;
79 	u32 crval;
80 	u32 srval;
81 
82 	/* Assert or deassert the bit */
83 	crval = readl(mmio + IMX_P0PHYCR);
84 	if (assert)
85 		crval |= bit;
86 	else
87 		crval &= ~bit;
88 	writel(crval, mmio + IMX_P0PHYCR);
89 
90 	/* Wait for the cr_ack signal */
91 	do {
92 		srval = readl(mmio + IMX_P0PHYSR);
93 		if ((assert ? srval : ~srval) & IMX_P0PHYSR_CR_ACK)
94 			break;
95 		usleep_range(100, 200);
96 	} while (--timeout);
97 
98 	return timeout ? 0 : -ETIMEDOUT;
99 }
100 
101 static int imx_phy_reg_addressing(u16 addr, void __iomem *mmio)
102 {
103 	u32 crval = addr;
104 	int ret;
105 
106 	/* Supply the address on cr_data_in */
107 	writel(crval, mmio + IMX_P0PHYCR);
108 
109 	/* Assert the cr_cap_addr signal */
110 	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, true);
111 	if (ret)
112 		return ret;
113 
114 	/* Deassert cr_cap_addr */
115 	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, false);
116 	if (ret)
117 		return ret;
118 
119 	return 0;
120 }
121 
122 static int imx_phy_reg_write(u16 val, void __iomem *mmio)
123 {
124 	u32 crval = val;
125 	int ret;
126 
127 	/* Supply the data on cr_data_in */
128 	writel(crval, mmio + IMX_P0PHYCR);
129 
130 	/* Assert the cr_cap_data signal */
131 	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, true);
132 	if (ret)
133 		return ret;
134 
135 	/* Deassert cr_cap_data */
136 	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, false);
137 	if (ret)
138 		return ret;
139 
140 	if (val & IMX_CLOCK_RESET_RESET) {
141 		/*
142 		 * In case we're resetting the phy, it's unable to acknowledge,
143 		 * so we return immediately here.
144 		 */
145 		crval |= IMX_P0PHYCR_CR_WRITE;
146 		writel(crval, mmio + IMX_P0PHYCR);
147 		goto out;
148 	}
149 
150 	/* Assert the cr_write signal */
151 	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, true);
152 	if (ret)
153 		return ret;
154 
155 	/* Deassert cr_write */
156 	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, false);
157 	if (ret)
158 		return ret;
159 
160 out:
161 	return 0;
162 }
163 
164 static int imx_phy_reg_read(u16 *val, void __iomem *mmio)
165 {
166 	int ret;
167 
168 	/* Assert the cr_read signal */
169 	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, true);
170 	if (ret)
171 		return ret;
172 
173 	/* Capture the data from cr_data_out[] */
174 	*val = readl(mmio + IMX_P0PHYSR) & IMX_P0PHYSR_CR_DATA_OUT;
175 
176 	/* Deassert cr_read */
177 	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, false);
178 	if (ret)
179 		return ret;
180 
181 	return 0;
182 }
183 
184 static int imx_sata_phy_reset(struct ahci_host_priv *hpriv)
185 {
186 	void __iomem *mmio = hpriv->mmio;
187 	int timeout = 10;
188 	u16 val;
189 	int ret;
190 
191 	/* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */
192 	ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio);
193 	if (ret)
194 		return ret;
195 	ret = imx_phy_reg_write(IMX_CLOCK_RESET_RESET, mmio);
196 	if (ret)
197 		return ret;
198 
199 	/* Wait for PHY RX_PLL to be stable */
200 	do {
201 		usleep_range(100, 200);
202 		ret = imx_phy_reg_addressing(IMX_LANE0_OUT_STAT, mmio);
203 		if (ret)
204 			return ret;
205 		ret = imx_phy_reg_read(&val, mmio);
206 		if (ret)
207 			return ret;
208 		if (val & IMX_LANE0_OUT_STAT_RX_PLL_STATE)
209 			break;
210 	} while (--timeout);
211 
212 	return timeout ? 0 : -ETIMEDOUT;
213 }
214 
215 static int imx_sata_enable(struct ahci_host_priv *hpriv)
216 {
217 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
218 	struct device *dev = &imxpriv->ahci_pdev->dev;
219 	int ret;
220 
221 	if (imxpriv->no_device)
222 		return 0;
223 
224 	if (hpriv->target_pwr) {
225 		ret = regulator_enable(hpriv->target_pwr);
226 		if (ret)
227 			return ret;
228 	}
229 
230 	ret = clk_prepare_enable(imxpriv->sata_ref_clk);
231 	if (ret < 0)
232 		goto disable_regulator;
233 
234 	if (imxpriv->type == AHCI_IMX6Q) {
235 		/*
236 		 * set PHY Paremeters, two steps to configure the GPR13,
237 		 * one write for rest of parameters, mask of first write
238 		 * is 0x07ffffff, and the other one write for setting
239 		 * the mpll_clk_en.
240 		 */
241 		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
242 				   IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK |
243 				   IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK |
244 				   IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK |
245 				   IMX6Q_GPR13_SATA_SPD_MODE_MASK |
246 				   IMX6Q_GPR13_SATA_MPLL_SS_EN |
247 				   IMX6Q_GPR13_SATA_TX_ATTEN_MASK |
248 				   IMX6Q_GPR13_SATA_TX_BOOST_MASK |
249 				   IMX6Q_GPR13_SATA_TX_LVL_MASK |
250 				   IMX6Q_GPR13_SATA_MPLL_CLK_EN |
251 				   IMX6Q_GPR13_SATA_TX_EDGE_RATE,
252 				   imxpriv->phy_params);
253 		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
254 				   IMX6Q_GPR13_SATA_MPLL_CLK_EN,
255 				   IMX6Q_GPR13_SATA_MPLL_CLK_EN);
256 
257 		usleep_range(100, 200);
258 
259 		ret = imx_sata_phy_reset(hpriv);
260 		if (ret) {
261 			dev_err(dev, "failed to reset phy: %d\n", ret);
262 			goto disable_clk;
263 		}
264 	}
265 
266 	usleep_range(1000, 2000);
267 
268 	return 0;
269 
270 disable_clk:
271 	clk_disable_unprepare(imxpriv->sata_ref_clk);
272 disable_regulator:
273 	if (hpriv->target_pwr)
274 		regulator_disable(hpriv->target_pwr);
275 
276 	return ret;
277 }
278 
279 static void imx_sata_disable(struct ahci_host_priv *hpriv)
280 {
281 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
282 
283 	if (imxpriv->no_device)
284 		return;
285 
286 	if (imxpriv->type == AHCI_IMX6Q) {
287 		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
288 				   IMX6Q_GPR13_SATA_MPLL_CLK_EN,
289 				   !IMX6Q_GPR13_SATA_MPLL_CLK_EN);
290 	}
291 
292 	clk_disable_unprepare(imxpriv->sata_ref_clk);
293 
294 	if (hpriv->target_pwr)
295 		regulator_disable(hpriv->target_pwr);
296 }
297 
298 static void ahci_imx_error_handler(struct ata_port *ap)
299 {
300 	u32 reg_val;
301 	struct ata_device *dev;
302 	struct ata_host *host = dev_get_drvdata(ap->dev);
303 	struct ahci_host_priv *hpriv = host->private_data;
304 	void __iomem *mmio = hpriv->mmio;
305 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
306 
307 	ahci_error_handler(ap);
308 
309 	if (!(imxpriv->first_time) || ahci_imx_hotplug)
310 		return;
311 
312 	imxpriv->first_time = false;
313 
314 	ata_for_each_dev(dev, &ap->link, ENABLED)
315 		return;
316 	/*
317 	 * Disable link to save power.  An imx ahci port can't be recovered
318 	 * without full reset once the pddq mode is enabled making it
319 	 * impossible to use as part of libata LPM.
320 	 */
321 	reg_val = readl(mmio + IMX_P0PHYCR);
322 	writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR);
323 	imx_sata_disable(hpriv);
324 	imxpriv->no_device = true;
325 
326 	dev_info(ap->dev, "no device found, disabling link.\n");
327 	dev_info(ap->dev, "pass " MODULE_PARAM_PREFIX ".hotplug=1 to enable hotplug\n");
328 }
329 
330 static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
331 		       unsigned long deadline)
332 {
333 	struct ata_port *ap = link->ap;
334 	struct ata_host *host = dev_get_drvdata(ap->dev);
335 	struct ahci_host_priv *hpriv = host->private_data;
336 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
337 	int ret = -EIO;
338 
339 	if (imxpriv->type == AHCI_IMX53)
340 		ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline);
341 	else if (imxpriv->type == AHCI_IMX6Q)
342 		ret = ahci_ops.softreset(link, class, deadline);
343 
344 	return ret;
345 }
346 
347 static struct ata_port_operations ahci_imx_ops = {
348 	.inherits	= &ahci_ops,
349 	.host_stop	= ahci_imx_host_stop,
350 	.error_handler	= ahci_imx_error_handler,
351 	.softreset	= ahci_imx_softreset,
352 };
353 
354 static const struct ata_port_info ahci_imx_port_info = {
355 	.flags		= AHCI_FLAG_COMMON,
356 	.pio_mask	= ATA_PIO4,
357 	.udma_mask	= ATA_UDMA6,
358 	.port_ops	= &ahci_imx_ops,
359 };
360 
361 static const struct of_device_id imx_ahci_of_match[] = {
362 	{ .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 },
363 	{ .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q },
364 	{},
365 };
366 MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
367 
368 struct reg_value {
369 	u32 of_value;
370 	u32 reg_value;
371 };
372 
373 struct reg_property {
374 	const char *name;
375 	const struct reg_value *values;
376 	size_t num_values;
377 	u32 def_value;
378 	u32 set_value;
379 };
380 
381 static const struct reg_value gpr13_tx_level[] = {
382 	{  937, IMX6Q_GPR13_SATA_TX_LVL_0_937_V },
383 	{  947, IMX6Q_GPR13_SATA_TX_LVL_0_947_V },
384 	{  957, IMX6Q_GPR13_SATA_TX_LVL_0_957_V },
385 	{  966, IMX6Q_GPR13_SATA_TX_LVL_0_966_V },
386 	{  976, IMX6Q_GPR13_SATA_TX_LVL_0_976_V },
387 	{  986, IMX6Q_GPR13_SATA_TX_LVL_0_986_V },
388 	{  996, IMX6Q_GPR13_SATA_TX_LVL_0_996_V },
389 	{ 1005, IMX6Q_GPR13_SATA_TX_LVL_1_005_V },
390 	{ 1015, IMX6Q_GPR13_SATA_TX_LVL_1_015_V },
391 	{ 1025, IMX6Q_GPR13_SATA_TX_LVL_1_025_V },
392 	{ 1035, IMX6Q_GPR13_SATA_TX_LVL_1_035_V },
393 	{ 1045, IMX6Q_GPR13_SATA_TX_LVL_1_045_V },
394 	{ 1054, IMX6Q_GPR13_SATA_TX_LVL_1_054_V },
395 	{ 1064, IMX6Q_GPR13_SATA_TX_LVL_1_064_V },
396 	{ 1074, IMX6Q_GPR13_SATA_TX_LVL_1_074_V },
397 	{ 1084, IMX6Q_GPR13_SATA_TX_LVL_1_084_V },
398 	{ 1094, IMX6Q_GPR13_SATA_TX_LVL_1_094_V },
399 	{ 1104, IMX6Q_GPR13_SATA_TX_LVL_1_104_V },
400 	{ 1113, IMX6Q_GPR13_SATA_TX_LVL_1_113_V },
401 	{ 1123, IMX6Q_GPR13_SATA_TX_LVL_1_123_V },
402 	{ 1133, IMX6Q_GPR13_SATA_TX_LVL_1_133_V },
403 	{ 1143, IMX6Q_GPR13_SATA_TX_LVL_1_143_V },
404 	{ 1152, IMX6Q_GPR13_SATA_TX_LVL_1_152_V },
405 	{ 1162, IMX6Q_GPR13_SATA_TX_LVL_1_162_V },
406 	{ 1172, IMX6Q_GPR13_SATA_TX_LVL_1_172_V },
407 	{ 1182, IMX6Q_GPR13_SATA_TX_LVL_1_182_V },
408 	{ 1191, IMX6Q_GPR13_SATA_TX_LVL_1_191_V },
409 	{ 1201, IMX6Q_GPR13_SATA_TX_LVL_1_201_V },
410 	{ 1211, IMX6Q_GPR13_SATA_TX_LVL_1_211_V },
411 	{ 1221, IMX6Q_GPR13_SATA_TX_LVL_1_221_V },
412 	{ 1230, IMX6Q_GPR13_SATA_TX_LVL_1_230_V },
413 	{ 1240, IMX6Q_GPR13_SATA_TX_LVL_1_240_V }
414 };
415 
416 static const struct reg_value gpr13_tx_boost[] = {
417 	{    0, IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB },
418 	{  370, IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB },
419 	{  740, IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB },
420 	{ 1110, IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB },
421 	{ 1480, IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB },
422 	{ 1850, IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB },
423 	{ 2220, IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB },
424 	{ 2590, IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB },
425 	{ 2960, IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB },
426 	{ 3330, IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB },
427 	{ 3700, IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB },
428 	{ 4070, IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB },
429 	{ 4440, IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB },
430 	{ 4810, IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB },
431 	{ 5280, IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB },
432 	{ 5750, IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB }
433 };
434 
435 static const struct reg_value gpr13_tx_atten[] = {
436 	{  8, IMX6Q_GPR13_SATA_TX_ATTEN_8_16 },
437 	{  9, IMX6Q_GPR13_SATA_TX_ATTEN_9_16 },
438 	{ 10, IMX6Q_GPR13_SATA_TX_ATTEN_10_16 },
439 	{ 12, IMX6Q_GPR13_SATA_TX_ATTEN_12_16 },
440 	{ 14, IMX6Q_GPR13_SATA_TX_ATTEN_14_16 },
441 	{ 16, IMX6Q_GPR13_SATA_TX_ATTEN_16_16 },
442 };
443 
444 static const struct reg_value gpr13_rx_eq[] = {
445 	{  500, IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB },
446 	{ 1000, IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB },
447 	{ 1500, IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB },
448 	{ 2000, IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB },
449 	{ 2500, IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB },
450 	{ 3000, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB },
451 	{ 3500, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB },
452 	{ 4000, IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB },
453 };
454 
455 static const struct reg_property gpr13_props[] = {
456 	{
457 		.name = "fsl,transmit-level-mV",
458 		.values = gpr13_tx_level,
459 		.num_values = ARRAY_SIZE(gpr13_tx_level),
460 		.def_value = IMX6Q_GPR13_SATA_TX_LVL_1_025_V,
461 	}, {
462 		.name = "fsl,transmit-boost-mdB",
463 		.values = gpr13_tx_boost,
464 		.num_values = ARRAY_SIZE(gpr13_tx_boost),
465 		.def_value = IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB,
466 	}, {
467 		.name = "fsl,transmit-atten-16ths",
468 		.values = gpr13_tx_atten,
469 		.num_values = ARRAY_SIZE(gpr13_tx_atten),
470 		.def_value = IMX6Q_GPR13_SATA_TX_ATTEN_9_16,
471 	}, {
472 		.name = "fsl,receive-eq-mdB",
473 		.values = gpr13_rx_eq,
474 		.num_values = ARRAY_SIZE(gpr13_rx_eq),
475 		.def_value = IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB,
476 	}, {
477 		.name = "fsl,no-spread-spectrum",
478 		.def_value = IMX6Q_GPR13_SATA_MPLL_SS_EN,
479 		.set_value = 0,
480 	},
481 };
482 
483 static u32 imx_ahci_parse_props(struct device *dev,
484 				const struct reg_property *prop, size_t num)
485 {
486 	struct device_node *np = dev->of_node;
487 	u32 reg_value = 0;
488 	int i, j;
489 
490 	for (i = 0; i < num; i++, prop++) {
491 		u32 of_val;
492 
493 		if (prop->num_values == 0) {
494 			if (of_property_read_bool(np, prop->name))
495 				reg_value |= prop->set_value;
496 			else
497 				reg_value |= prop->def_value;
498 			continue;
499 		}
500 
501 		if (of_property_read_u32(np, prop->name, &of_val)) {
502 			dev_info(dev, "%s not specified, using %08x\n",
503 				prop->name, prop->def_value);
504 			reg_value |= prop->def_value;
505 			continue;
506 		}
507 
508 		for (j = 0; j < prop->num_values; j++) {
509 			if (prop->values[j].of_value == of_val) {
510 				dev_info(dev, "%s value %u, using %08x\n",
511 					prop->name, of_val, prop->values[j].reg_value);
512 				reg_value |= prop->values[j].reg_value;
513 				break;
514 			}
515 		}
516 
517 		if (j == prop->num_values) {
518 			dev_err(dev, "DT property %s is not a valid value\n",
519 				prop->name);
520 			reg_value |= prop->def_value;
521 		}
522 	}
523 
524 	return reg_value;
525 }
526 
527 static int imx_ahci_probe(struct platform_device *pdev)
528 {
529 	struct device *dev = &pdev->dev;
530 	const struct of_device_id *of_id;
531 	struct ahci_host_priv *hpriv;
532 	struct imx_ahci_priv *imxpriv;
533 	unsigned int reg_val;
534 	int ret;
535 
536 	of_id = of_match_device(imx_ahci_of_match, dev);
537 	if (!of_id)
538 		return -EINVAL;
539 
540 	imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
541 	if (!imxpriv)
542 		return -ENOMEM;
543 
544 	imxpriv->ahci_pdev = pdev;
545 	imxpriv->no_device = false;
546 	imxpriv->first_time = true;
547 	imxpriv->type = (enum ahci_imx_type)of_id->data;
548 
549 	imxpriv->sata_clk = devm_clk_get(dev, "sata");
550 	if (IS_ERR(imxpriv->sata_clk)) {
551 		dev_err(dev, "can't get sata clock.\n");
552 		return PTR_ERR(imxpriv->sata_clk);
553 	}
554 
555 	imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
556 	if (IS_ERR(imxpriv->sata_ref_clk)) {
557 		dev_err(dev, "can't get sata_ref clock.\n");
558 		return PTR_ERR(imxpriv->sata_ref_clk);
559 	}
560 
561 	imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
562 	if (IS_ERR(imxpriv->ahb_clk)) {
563 		dev_err(dev, "can't get ahb clock.\n");
564 		return PTR_ERR(imxpriv->ahb_clk);
565 	}
566 
567 	if (imxpriv->type == AHCI_IMX6Q) {
568 		u32 reg_value;
569 
570 		imxpriv->gpr = syscon_regmap_lookup_by_compatible(
571 							"fsl,imx6q-iomuxc-gpr");
572 		if (IS_ERR(imxpriv->gpr)) {
573 			dev_err(dev,
574 				"failed to find fsl,imx6q-iomux-gpr regmap\n");
575 			return PTR_ERR(imxpriv->gpr);
576 		}
577 
578 		reg_value = imx_ahci_parse_props(dev, gpr13_props,
579 						 ARRAY_SIZE(gpr13_props));
580 
581 		imxpriv->phy_params =
582 				   IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M |
583 				   IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F |
584 				   IMX6Q_GPR13_SATA_SPD_MODE_3P0G |
585 				   reg_value;
586 	}
587 
588 	hpriv = ahci_platform_get_resources(pdev);
589 	if (IS_ERR(hpriv))
590 		return PTR_ERR(hpriv);
591 
592 	hpriv->plat_data = imxpriv;
593 
594 	ret = clk_prepare_enable(imxpriv->sata_clk);
595 	if (ret)
596 		return ret;
597 
598 	ret = imx_sata_enable(hpriv);
599 	if (ret)
600 		goto disable_clk;
601 
602 	/*
603 	 * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
604 	 * and IP vendor specific register IMX_TIMER1MS.
605 	 * Configure CAP_SSS (support stagered spin up).
606 	 * Implement the port0.
607 	 * Get the ahb clock rate, and configure the TIMER1MS register.
608 	 */
609 	reg_val = readl(hpriv->mmio + HOST_CAP);
610 	if (!(reg_val & HOST_CAP_SSS)) {
611 		reg_val |= HOST_CAP_SSS;
612 		writel(reg_val, hpriv->mmio + HOST_CAP);
613 	}
614 	reg_val = readl(hpriv->mmio + HOST_PORTS_IMPL);
615 	if (!(reg_val & 0x1)) {
616 		reg_val |= 0x1;
617 		writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL);
618 	}
619 
620 	reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
621 	writel(reg_val, hpriv->mmio + IMX_TIMER1MS);
622 
623 	ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info);
624 	if (ret)
625 		goto disable_sata;
626 
627 	return 0;
628 
629 disable_sata:
630 	imx_sata_disable(hpriv);
631 disable_clk:
632 	clk_disable_unprepare(imxpriv->sata_clk);
633 	return ret;
634 }
635 
636 static void ahci_imx_host_stop(struct ata_host *host)
637 {
638 	struct ahci_host_priv *hpriv = host->private_data;
639 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
640 
641 	imx_sata_disable(hpriv);
642 	clk_disable_unprepare(imxpriv->sata_clk);
643 }
644 
645 #ifdef CONFIG_PM_SLEEP
646 static int imx_ahci_suspend(struct device *dev)
647 {
648 	struct ata_host *host = dev_get_drvdata(dev);
649 	struct ahci_host_priv *hpriv = host->private_data;
650 	int ret;
651 
652 	ret = ahci_platform_suspend_host(dev);
653 	if (ret)
654 		return ret;
655 
656 	imx_sata_disable(hpriv);
657 
658 	return 0;
659 }
660 
661 static int imx_ahci_resume(struct device *dev)
662 {
663 	struct ata_host *host = dev_get_drvdata(dev);
664 	struct ahci_host_priv *hpriv = host->private_data;
665 	int ret;
666 
667 	ret = imx_sata_enable(hpriv);
668 	if (ret)
669 		return ret;
670 
671 	return ahci_platform_resume_host(dev);
672 }
673 #endif
674 
675 static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume);
676 
677 static struct platform_driver imx_ahci_driver = {
678 	.probe = imx_ahci_probe,
679 	.remove = ata_platform_remove_one,
680 	.driver = {
681 		.name = "ahci-imx",
682 		.of_match_table = imx_ahci_of_match,
683 		.pm = &ahci_imx_pm_ops,
684 	},
685 };
686 module_platform_driver(imx_ahci_driver);
687 
688 MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver");
689 MODULE_AUTHOR("Richard Zhu <Hong-Xing.Zhu@freescale.com>");
690 MODULE_LICENSE("GPL");
691 MODULE_ALIAS("ahci:imx");
692