1# 2# SATA/PATA driver configuration 3# 4 5menuconfig ATA 6 tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" 7 depends on HAS_IOMEM 8 depends on BLOCK 9 depends on !(M32R || M68K) || BROKEN 10 select SCSI 11 ---help--- 12 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or 13 any other ATA device under Linux, say Y and make sure that you know 14 the name of your ATA host adapter (the card inside your computer 15 that "speaks" the ATA protocol, also called ATA controller), 16 because you will be asked for it. 17 18 NOTE: ATA enables basic SCSI support; *however*, 19 'SCSI disk support', 'SCSI tape support', or 20 'SCSI CDROM support' may also be needed, 21 depending on your hardware configuration. 22 23if ATA 24 25config ATA_NONSTANDARD 26 bool 27 default n 28 29config ATA_ACPI 30 bool "ATA ACPI Support" 31 depends on ACPI && PCI 32 select ACPI_DOCK 33 default y 34 help 35 This option adds support for ATA-related ACPI objects. 36 These ACPI objects add the ability to retrieve taskfiles 37 from the ACPI BIOS and write them to the disk controller. 38 These objects may be related to performance, security, 39 power management, or other areas. 40 You can disable this at kernel boot time by using the 41 option libata.noacpi=1 42 43config SATA_PMP 44 bool "SATA Port Multiplier support" 45 default y 46 help 47 This option adds support for SATA Port Multipliers 48 (the SATA version of an ethernet hub, or SAS expander). 49 50config SATA_AHCI 51 tristate "AHCI SATA support" 52 depends on PCI 53 help 54 This option enables support for AHCI Serial ATA. 55 56 If unsure, say N. 57 58config SATA_SIL24 59 tristate "Silicon Image 3124/3132 SATA support" 60 depends on PCI 61 help 62 This option enables support for Silicon Image 3124/3132 Serial ATA. 63 64 If unsure, say N. 65 66config SATA_FSL 67 tristate "Freescale 3.0Gbps SATA support" 68 depends on FSL_SOC 69 help 70 This option enables support for Freescale 3.0Gbps SATA controller. 71 It can be found on MPC837x and MPC8315. 72 73 If unsure, say N. 74 75config ATA_SFF 76 bool "ATA SFF support" 77 default y 78 help 79 This option adds support for ATA controllers with SFF 80 compliant or similar programming interface. 81 82 SFF is the legacy IDE interface that has been around since 83 the dawn of time. Almost all PATA controllers have an 84 SFF interface. Many SATA controllers have an SFF interface 85 when configured into a legacy compatibility mode. 86 87 For users with exclusively modern controllers like AHCI, 88 Silicon Image 3124, or Marvell 6440, you may choose to 89 disable this unneeded SFF support. 90 91 If unsure, say Y. 92 93if ATA_SFF 94 95config SATA_SVW 96 tristate "ServerWorks Frodo / Apple K2 SATA support" 97 depends on PCI 98 help 99 This option enables support for Broadcom/Serverworks/Apple K2 100 SATA support. 101 102 If unsure, say N. 103 104config ATA_PIIX 105 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" 106 depends on PCI 107 help 108 This option enables support for ICH5/6/7/8 Serial ATA 109 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series 110 host controllers. 111 112 If unsure, say N. 113 114config SATA_MV 115 tristate "Marvell SATA support" 116 help 117 This option enables support for the Marvell Serial ATA family. 118 Currently supports 88SX[56]0[48][01] PCI(-X) chips, 119 as well as the newer [67]042 PCI-X/PCIe and SOC devices. 120 121 If unsure, say N. 122 123config SATA_NV 124 tristate "NVIDIA SATA support" 125 depends on PCI 126 help 127 This option enables support for NVIDIA Serial ATA. 128 129 If unsure, say N. 130 131config PDC_ADMA 132 tristate "Pacific Digital ADMA support" 133 depends on PCI 134 help 135 This option enables support for Pacific Digital ADMA controllers 136 137 If unsure, say N. 138 139config SATA_QSTOR 140 tristate "Pacific Digital SATA QStor support" 141 depends on PCI 142 help 143 This option enables support for Pacific Digital Serial ATA QStor. 144 145 If unsure, say N. 146 147config SATA_PROMISE 148 tristate "Promise SATA TX2/TX4 support" 149 depends on PCI 150 help 151 This option enables support for Promise Serial ATA TX2/TX4. 152 153 If unsure, say N. 154 155config SATA_SX4 156 tristate "Promise SATA SX4 support (Experimental)" 157 depends on PCI && EXPERIMENTAL 158 help 159 This option enables support for Promise Serial ATA SX4. 160 161 If unsure, say N. 162 163config SATA_SIL 164 tristate "Silicon Image SATA support" 165 depends on PCI 166 help 167 This option enables support for Silicon Image Serial ATA. 168 169 If unsure, say N. 170 171config SATA_SIS 172 tristate "SiS 964/965/966/180 SATA support" 173 depends on PCI 174 select PATA_SIS 175 help 176 This option enables support for SiS Serial ATA on 177 SiS 964/965/966/180 and Parallel ATA on SiS 180. 178 The PATA support for SiS 180 requires additionally to 179 enable the PATA_SIS driver in the config. 180 If unsure, say N. 181 182config SATA_ULI 183 tristate "ULi Electronics SATA support" 184 depends on PCI 185 help 186 This option enables support for ULi Electronics SATA. 187 188 If unsure, say N. 189 190config SATA_VIA 191 tristate "VIA SATA support" 192 depends on PCI 193 help 194 This option enables support for VIA Serial ATA. 195 196 If unsure, say N. 197 198config SATA_VITESSE 199 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" 200 depends on PCI 201 help 202 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. 203 204 If unsure, say N. 205 206config SATA_INIC162X 207 tristate "Initio 162x SATA support" 208 depends on PCI 209 help 210 This option enables support for Initio 162x Serial ATA. 211 212config PATA_ACPI 213 tristate "ACPI firmware driver for PATA" 214 depends on ATA_ACPI 215 help 216 This option enables an ACPI method driver which drives 217 motherboard PATA controller interfaces through the ACPI 218 firmware in the BIOS. This driver can sometimes handle 219 otherwise unsupported hardware. 220 221config PATA_ALI 222 tristate "ALi PATA support" 223 depends on PCI 224 help 225 This option enables support for the ALi ATA interfaces 226 found on the many ALi chipsets. 227 228 If unsure, say N. 229 230config PATA_AMD 231 tristate "AMD/NVidia PATA support" 232 depends on PCI 233 help 234 This option enables support for the AMD and NVidia PATA 235 interfaces found on the chipsets for Athlon/Athlon64. 236 237 If unsure, say N. 238 239config PATA_ARTOP 240 tristate "ARTOP 6210/6260 PATA support" 241 depends on PCI 242 help 243 This option enables support for ARTOP PATA controllers. 244 245 If unsure, say N. 246 247config PATA_AT32 248 tristate "Atmel AVR32 PATA support (Experimental)" 249 depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL 250 help 251 This option enables support for the IDE devices on the 252 Atmel AT32AP platform. 253 254 If unsure, say N. 255 256config PATA_ATIIXP 257 tristate "ATI PATA support" 258 depends on PCI 259 help 260 This option enables support for the ATI ATA interfaces 261 found on the many ATI chipsets. 262 263 If unsure, say N. 264 265config PATA_CMD640_PCI 266 tristate "CMD640 PCI PATA support (Experimental)" 267 depends on PCI && EXPERIMENTAL 268 help 269 This option enables support for the CMD640 PCI IDE 270 interface chip. Only the primary channel is currently 271 supported. 272 273 If unsure, say N. 274 275config PATA_CMD64X 276 tristate "CMD64x PATA support" 277 depends on PCI 278 help 279 This option enables support for the CMD64x series chips 280 except for the CMD640. 281 282 If unsure, say N. 283 284config PATA_CS5520 285 tristate "CS5510/5520 PATA support" 286 depends on PCI 287 help 288 This option enables support for the Cyrix 5510/5520 289 companion chip used with the MediaGX/Geode processor family. 290 291 If unsure, say N. 292 293config PATA_CS5530 294 tristate "CS5530 PATA support" 295 depends on PCI 296 help 297 This option enables support for the Cyrix/NatSemi/AMD CS5530 298 companion chip used with the MediaGX/Geode processor family. 299 300 If unsure, say N. 301 302config PATA_CS5535 303 tristate "CS5535 PATA support (Experimental)" 304 depends on PCI && X86 && !X86_64 && EXPERIMENTAL 305 help 306 This option enables support for the NatSemi/AMD CS5535 307 companion chip used with the Geode processor family. 308 309 If unsure, say N. 310 311config PATA_CS5536 312 tristate "CS5536 PATA support" 313 depends on PCI && X86 && !X86_64 314 help 315 This option enables support for the AMD CS5536 316 companion chip used with the Geode LX processor family. 317 318 If unsure, say N. 319 320config PATA_CYPRESS 321 tristate "Cypress CY82C693 PATA support (Very Experimental)" 322 depends on PCI && EXPERIMENTAL 323 help 324 This option enables support for the Cypress/Contaq CY82C693 325 chipset found in some Alpha systems 326 327 If unsure, say N. 328 329config PATA_EFAR 330 tristate "EFAR SLC90E66 support" 331 depends on PCI 332 help 333 This option enables support for the EFAR SLC90E66 334 IDE controller found on some older machines. 335 336 If unsure, say N. 337 338config ATA_GENERIC 339 tristate "Generic ATA support" 340 depends on PCI 341 help 342 This option enables support for generic BIOS configured 343 ATA controllers via the new ATA layer 344 345 If unsure, say N. 346 347config PATA_HPT366 348 tristate "HPT 366/368 PATA support" 349 depends on PCI 350 help 351 This option enables support for the HPT 366 and 368 352 PATA controllers via the new ATA layer. 353 354 If unsure, say N. 355 356config PATA_HPT37X 357 tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" 358 depends on PCI && EXPERIMENTAL 359 help 360 This option enables support for the majority of the later HPT 361 PATA controllers via the new ATA layer. 362 363 If unsure, say N. 364 365config PATA_HPT3X2N 366 tristate "HPT 372N/302N PATA support (Experimental)" 367 depends on PCI && EXPERIMENTAL 368 help 369 This option enables support for the N variant HPT PATA 370 controllers via the new ATA layer 371 372 If unsure, say N. 373 374config PATA_HPT3X3 375 tristate "HPT 343/363 PATA support" 376 depends on PCI 377 help 378 This option enables support for the HPT 343/363 379 PATA controllers via the new ATA layer 380 381 If unsure, say N. 382 383config PATA_HPT3X3_DMA 384 bool "HPT 343/363 DMA support (Experimental)" 385 depends on PATA_HPT3X3 386 help 387 This option enables DMA support for the HPT343/363 388 controllers. Enable with care as there are still some 389 problems with DMA on this chipset. 390 391config PATA_ISAPNP 392 tristate "ISA Plug and Play PATA support" 393 depends on ISAPNP 394 help 395 This option enables support for ISA plug & play ATA 396 controllers such as those found on old soundcards. 397 398 If unsure, say N. 399 400config PATA_IT821X 401 tristate "IT8211/2 PATA support" 402 depends on PCI 403 help 404 This option enables support for the ITE 8211 and 8212 405 PATA controllers via the new ATA layer, including RAID 406 mode. 407 408 If unsure, say N. 409 410config PATA_IT8213 411 tristate "IT8213 PATA support (Experimental)" 412 depends on PCI && EXPERIMENTAL 413 help 414 This option enables support for the ITE 821 PATA 415 controllers via the new ATA layer. 416 417 If unsure, say N. 418 419config PATA_JMICRON 420 tristate "JMicron PATA support" 421 depends on PCI 422 help 423 Enable support for the JMicron IDE controller, via the new 424 ATA layer. 425 426 If unsure, say N. 427 428config PATA_LEGACY 429 tristate "Legacy ISA PATA support (Experimental)" 430 depends on ISA && EXPERIMENTAL 431 help 432 This option enables support for ISA/VLB bus legacy PATA 433 ports and allows them to be accessed via the new ATA layer. 434 435 If unsure, say N. 436 437config PATA_TRIFLEX 438 tristate "Compaq Triflex PATA support" 439 depends on PCI 440 help 441 Enable support for the Compaq 'Triflex' IDE controller as found 442 on many Compaq Pentium-Pro systems, via the new ATA layer. 443 444 If unsure, say N. 445 446config PATA_MARVELL 447 tristate "Marvell PATA support via legacy mode" 448 depends on PCI 449 help 450 This option enables limited support for the Marvell 88SE61xx ATA 451 controllers. If you wish to use only the SATA ports then select 452 the AHCI driver alone. If you wish to the use the PATA port or 453 both SATA and PATA include this driver. 454 455 If unsure, say N. 456 457config PATA_MPC52xx 458 tristate "Freescale MPC52xx SoC internal IDE" 459 depends on PPC_MPC52xx && PPC_BESTCOMM 460 select PPC_BESTCOMM_ATA 461 help 462 This option enables support for integrated IDE controller 463 of the Freescale MPC52xx SoC. 464 465 If unsure, say N. 466 467config PATA_MPIIX 468 tristate "Intel PATA MPIIX support" 469 depends on PCI 470 help 471 This option enables support for MPIIX PATA support. 472 473 If unsure, say N. 474 475config PATA_OLDPIIX 476 tristate "Intel PATA old PIIX support" 477 depends on PCI 478 help 479 This option enables support for early PIIX PATA support. 480 481 If unsure, say N. 482 483config PATA_NETCELL 484 tristate "NETCELL Revolution RAID support" 485 depends on PCI 486 help 487 This option enables support for the Netcell Revolution RAID 488 PATA controller. 489 490 If unsure, say N. 491 492config PATA_NINJA32 493 tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" 494 depends on PCI && EXPERIMENTAL 495 help 496 This option enables support for the Ninja32, Delkin and 497 possibly other brands of Cardbus ATA adapter 498 499 If unsure, say N. 500 501config PATA_NS87410 502 tristate "Nat Semi NS87410 PATA support" 503 depends on PCI 504 help 505 This option enables support for the National Semiconductor 506 NS87410 PCI-IDE controller. 507 508 If unsure, say N. 509 510config PATA_NS87415 511 tristate "Nat Semi NS87415 PATA support" 512 depends on PCI 513 help 514 This option enables support for the National Semiconductor 515 NS87415 PCI-IDE controller. 516 517 If unsure, say N. 518 519config PATA_OPTI 520 tristate "OPTI621/6215 PATA support (Very Experimental)" 521 depends on PCI && EXPERIMENTAL 522 help 523 This option enables full PIO support for the early Opti ATA 524 controllers found on some old motherboards. 525 526 If unsure, say N. 527 528config PATA_OPTIDMA 529 tristate "OPTI FireStar PATA support (Very Experimental)" 530 depends on PCI && EXPERIMENTAL 531 help 532 This option enables DMA/PIO support for the later OPTi 533 controllers found on some old motherboards and in some 534 laptops. 535 536 If unsure, say N. 537 538config PATA_PCMCIA 539 tristate "PCMCIA PATA support" 540 depends on PCMCIA 541 help 542 This option enables support for PCMCIA ATA interfaces, including 543 compact flash card adapters via the new ATA layer. 544 545 If unsure, say N. 546 547config PATA_PDC_OLD 548 tristate "Older Promise PATA controller support" 549 depends on PCI 550 help 551 This option enables support for the Promise 20246, 20262, 20263, 552 20265 and 20267 adapters. 553 554 If unsure, say N. 555 556config PATA_QDI 557 tristate "QDI VLB PATA support" 558 depends on ISA 559 help 560 Support for QDI 6500 and 6580 PATA controllers on VESA local bus. 561 562config PATA_RADISYS 563 tristate "RADISYS 82600 PATA support (Experimental)" 564 depends on PCI && EXPERIMENTAL 565 help 566 This option enables support for the RADISYS 82600 567 PATA controllers via the new ATA layer 568 569 If unsure, say N. 570 571config PATA_RB532 572 tristate "RouterBoard 532 PATA CompactFlash support" 573 depends on MIKROTIK_RB532 574 help 575 This option enables support for the RouterBoard 532 576 PATA CompactFlash controller. 577 578 If unsure, say N. 579 580config PATA_RZ1000 581 tristate "PC Tech RZ1000 PATA support" 582 depends on PCI 583 help 584 This option enables basic support for the PC Tech RZ1000/1 585 PATA controllers via the new ATA layer 586 587 If unsure, say N. 588 589config PATA_SC1200 590 tristate "SC1200 PATA support" 591 depends on PCI 592 help 593 This option enables support for the NatSemi/AMD SC1200 SoC 594 companion chip used with the Geode processor family. 595 596 If unsure, say N. 597 598config PATA_SERVERWORKS 599 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" 600 depends on PCI 601 help 602 This option enables support for the Serverworks OSB4/CSB5/CSB6 and 603 HT1000 PATA controllers, via the new ATA layer. 604 605 If unsure, say N. 606 607config PATA_PDC2027X 608 tristate "Promise PATA 2027x support" 609 depends on PCI 610 help 611 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. 612 613 If unsure, say N. 614 615config PATA_SIL680 616 tristate "CMD / Silicon Image 680 PATA support" 617 depends on PCI 618 help 619 This option enables support for CMD / Silicon Image 680 PATA. 620 621 If unsure, say N. 622 623config PATA_SIS 624 tristate "SiS PATA support" 625 depends on PCI 626 help 627 This option enables support for SiS PATA controllers 628 629 If unsure, say N. 630 631config PATA_VIA 632 tristate "VIA PATA support" 633 depends on PCI 634 help 635 This option enables support for the VIA PATA interfaces 636 found on the many VIA chipsets. 637 638 If unsure, say N. 639 640config PATA_WINBOND 641 tristate "Winbond SL82C105 PATA support" 642 depends on PCI 643 help 644 This option enables support for SL82C105 PATA devices found in the 645 Netwinder and some other systems 646 647 If unsure, say N. 648 649config PATA_WINBOND_VLB 650 tristate "Winbond W83759A VLB PATA support (Experimental)" 651 depends on ISA && EXPERIMENTAL 652 help 653 Support for the Winbond W83759A controller on Vesa Local Bus 654 systems. 655 656config HAVE_PATA_PLATFORM 657 bool 658 help 659 This is an internal configuration node for any machine that 660 uses pata-platform driver to enable the relevant driver in the 661 configuration structure without having to submit endless patches 662 to update the PATA_PLATFORM entry. 663 664config PATA_PLATFORM 665 tristate "Generic platform device PATA support" 666 depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM 667 help 668 This option enables support for generic directly connected ATA 669 devices commonly found on embedded systems. 670 671 If unsure, say N. 672 673config PATA_OF_PLATFORM 674 tristate "OpenFirmware platform device PATA support" 675 depends on PATA_PLATFORM && PPC_OF 676 help 677 This option enables support for generic directly connected ATA 678 devices commonly found on embedded systems with OpenFirmware 679 bindings. 680 681 If unsure, say N. 682 683config PATA_ICSIDE 684 tristate "Acorn ICS PATA support" 685 depends on ARM && ARCH_ACORN 686 help 687 On Acorn systems, say Y here if you wish to use the ICS PATA 688 interface card. This is not required for ICS partition support. 689 If you are unsure, say N to this. 690 691config PATA_IXP4XX_CF 692 tristate "IXP4XX Compact Flash support" 693 depends on ARCH_IXP4XX 694 help 695 This option enables support for a Compact Flash connected on 696 the ixp4xx expansion bus. This driver had been written for 697 Loft/Avila boards in mind but can work with others. 698 699 If unsure, say N. 700 701config PATA_OCTEON_CF 702 tristate "OCTEON Boot Bus Compact Flash support" 703 depends on CPU_CAVIUM_OCTEON 704 help 705 This option enables a polled compact flash driver for use with 706 compact flash cards attached to the OCTEON boot bus. 707 708 If unsure, say N. 709 710config PATA_SCC 711 tristate "Toshiba's Cell Reference Set IDE support" 712 depends on PCI && PPC_CELLEB 713 help 714 This option enables support for the built-in IDE controller on 715 Toshiba Cell Reference Board. 716 717 If unsure, say N. 718 719config PATA_SCH 720 tristate "Intel SCH PATA support" 721 depends on PCI 722 help 723 This option enables support for Intel SCH PATA on the Intel 724 SCH (US15W, US15L, UL11L) series host controllers. 725 726 If unsure, say N. 727 728config PATA_BF54X 729 tristate "Blackfin 54x ATAPI support" 730 depends on BF542 || BF548 || BF549 731 help 732 This option enables support for the built-in ATAPI controller on 733 Blackfin 54x family chips. 734 735 If unsure, say N. 736 737endif # ATA_SFF 738endif # ATA 739