1# 2# SATA/PATA driver configuration 3# 4 5menuconfig ATA 6 tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" 7 depends on HAS_IOMEM 8 depends on BLOCK 9 depends on !(M32R || M68K) || BROKEN 10 depends on !SUN4 || BROKEN 11 select SCSI 12 ---help--- 13 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or 14 any other ATA device under Linux, say Y and make sure that you know 15 the name of your ATA host adapter (the card inside your computer 16 that "speaks" the ATA protocol, also called ATA controller), 17 because you will be asked for it. 18 19 NOTE: ATA enables basic SCSI support; *however*, 20 'SCSI disk support', 'SCSI tape support', or 21 'SCSI CDROM support' may also be needed, 22 depending on your hardware configuration. 23 24if ATA 25 26config ATA_NONSTANDARD 27 bool 28 default n 29 30config ATA_ACPI 31 bool 32 depends on ACPI && PCI 33 default y 34 help 35 This option adds support for ATA-related ACPI objects. 36 These ACPI objects add the ability to retrieve taskfiles 37 from the ACPI BIOS and write them to the disk controller. 38 These objects may be related to performance, security, 39 power management, or other areas. 40 You can disable this at kernel boot time by using the 41 option libata.noacpi=1 42 43config SATA_AHCI 44 tristate "AHCI SATA support" 45 depends on PCI 46 help 47 This option enables support for AHCI Serial ATA. 48 49 If unsure, say N. 50 51config SATA_SVW 52 tristate "ServerWorks Frodo / Apple K2 SATA support" 53 depends on PCI 54 help 55 This option enables support for Broadcom/Serverworks/Apple K2 56 SATA support. 57 58 If unsure, say N. 59 60config ATA_PIIX 61 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" 62 depends on PCI 63 help 64 This option enables support for ICH5/6/7/8 Serial ATA 65 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series 66 host controllers. 67 68 If unsure, say N. 69 70config SATA_MV 71 tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" 72 depends on PCI && EXPERIMENTAL 73 help 74 This option enables support for the Marvell Serial ATA family. 75 Currently supports 88SX[56]0[48][01] chips. 76 77 If unsure, say N. 78 79config SATA_NV 80 tristate "NVIDIA SATA support" 81 depends on PCI 82 help 83 This option enables support for NVIDIA Serial ATA. 84 85 If unsure, say N. 86 87config PDC_ADMA 88 tristate "Pacific Digital ADMA support" 89 depends on PCI 90 help 91 This option enables support for Pacific Digital ADMA controllers 92 93 If unsure, say N. 94 95config SATA_QSTOR 96 tristate "Pacific Digital SATA QStor support" 97 depends on PCI 98 help 99 This option enables support for Pacific Digital Serial ATA QStor. 100 101 If unsure, say N. 102 103config SATA_PROMISE 104 tristate "Promise SATA TX2/TX4 support" 105 depends on PCI 106 help 107 This option enables support for Promise Serial ATA TX2/TX4. 108 109 If unsure, say N. 110 111config SATA_SX4 112 tristate "Promise SATA SX4 support" 113 depends on PCI && EXPERIMENTAL 114 help 115 This option enables support for Promise Serial ATA SX4. 116 117 If unsure, say N. 118 119config SATA_SIL 120 tristate "Silicon Image SATA support" 121 depends on PCI 122 help 123 This option enables support for Silicon Image Serial ATA. 124 125 If unsure, say N. 126 127config SATA_SIL24 128 tristate "Silicon Image 3124/3132 SATA support" 129 depends on PCI 130 help 131 This option enables support for Silicon Image 3124/3132 Serial ATA. 132 133 If unsure, say N. 134 135config SATA_SIS 136 tristate "SiS 964/965/966/180 SATA support" 137 depends on PCI 138 select PATA_SIS 139 help 140 This option enables support for SiS Serial ATA on 141 SiS 964/965/966/180 and Parallel ATA on SiS 180. 142 The PATA support for SiS 180 requires additionally to 143 enable the PATA_SIS driver in the config. 144 If unsure, say N. 145 146config SATA_ULI 147 tristate "ULi Electronics SATA support" 148 depends on PCI 149 help 150 This option enables support for ULi Electronics SATA. 151 152 If unsure, say N. 153 154config SATA_VIA 155 tristate "VIA SATA support" 156 depends on PCI 157 help 158 This option enables support for VIA Serial ATA. 159 160 If unsure, say N. 161 162config SATA_VITESSE 163 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" 164 depends on PCI 165 help 166 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. 167 168 If unsure, say N. 169 170config SATA_INIC162X 171 tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)" 172 depends on PCI && EXPERIMENTAL 173 help 174 This option enables support for Initio 162x Serial ATA. 175 176config PATA_ALI 177 tristate "ALi PATA support (Experimental)" 178 depends on PCI && EXPERIMENTAL 179 help 180 This option enables support for the ALi ATA interfaces 181 found on the many ALi chipsets. 182 183 If unsure, say N. 184 185config PATA_AMD 186 tristate "AMD/NVidia PATA support" 187 depends on PCI 188 help 189 This option enables support for the AMD and NVidia PATA 190 interfaces found on the chipsets for Athlon/Athlon64. 191 192 If unsure, say N. 193 194config PATA_ARTOP 195 tristate "ARTOP 6210/6260 PATA support (Experimental)" 196 depends on PCI && EXPERIMENTAL 197 help 198 This option enables support for ARTOP PATA controllers. 199 200 If unsure, say N. 201 202config PATA_ATIIXP 203 tristate "ATI PATA support (Experimental)" 204 depends on PCI && EXPERIMENTAL 205 help 206 This option enables support for the ATI ATA interfaces 207 found on the many ATI chipsets. 208 209 If unsure, say N. 210 211config PATA_CMD640_PCI 212 tristate "CMD640 PCI PATA support (Very Experimental)" 213 depends on PCI && EXPERIMENTAL 214 help 215 This option enables support for the CMD640 PCI IDE 216 interface chip. Only the primary channel is currently 217 supported. 218 219 If unsure, say N. 220 221config PATA_CMD64X 222 tristate "CMD64x PATA support (Very Experimental)" 223 depends on PCI&& EXPERIMENTAL 224 help 225 This option enables support for the CMD64x series chips 226 except for the CMD640. 227 228 If unsure, say N. 229 230config PATA_CS5520 231 tristate "CS5510/5520 PATA support" 232 depends on PCI 233 help 234 This option enables support for the Cyrix 5510/5520 235 companion chip used with the MediaGX/Geode processor family. 236 237 If unsure, say N. 238 239config PATA_CS5530 240 tristate "CS5530 PATA support (Experimental)" 241 depends on PCI && EXPERIMENTAL 242 help 243 This option enables support for the Cyrix/NatSemi/AMD CS5530 244 companion chip used with the MediaGX/Geode processor family. 245 246 If unsure, say N. 247 248config PATA_CS5535 249 tristate "CS5535 PATA support (Experimental)" 250 depends on PCI && X86 && !X86_64 && EXPERIMENTAL 251 help 252 This option enables support for the NatSemi/AMD CS5535 253 companion chip used with the Geode processor family. 254 255 If unsure, say N. 256 257config PATA_CYPRESS 258 tristate "Cypress CY82C693 PATA support (Very Experimental)" 259 depends on PCI && EXPERIMENTAL 260 help 261 This option enables support for the Cypress/Contaq CY82C693 262 chipset found in some Alpha systems 263 264 If unsure, say N. 265 266config PATA_EFAR 267 tristate "EFAR SLC90E66 support" 268 depends on PCI 269 help 270 This option enables support for the EFAR SLC90E66 271 IDE controller found on some older machines. 272 273 If unsure, say N. 274 275config ATA_GENERIC 276 tristate "Generic ATA support" 277 depends on PCI 278 help 279 This option enables support for generic BIOS configured 280 ATA controllers via the new ATA layer 281 282 If unsure, say N. 283 284config PATA_HPT366 285 tristate "HPT 366/368 PATA support (Experimental)" 286 depends on PCI && EXPERIMENTAL 287 help 288 This option enables support for the HPT 366 and 368 289 PATA controllers via the new ATA layer. 290 291 If unsure, say N. 292 293config PATA_HPT37X 294 tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" 295 depends on PCI && EXPERIMENTAL 296 help 297 This option enables support for the majority of the later HPT 298 PATA controllers via the new ATA layer. 299 300 If unsure, say N. 301 302config PATA_HPT3X2N 303 tristate "HPT 372N/302N PATA support (Very Experimental)" 304 depends on PCI && EXPERIMENTAL 305 help 306 This option enables support for the N variant HPT PATA 307 controllers via the new ATA layer 308 309 If unsure, say N. 310 311config PATA_HPT3X3 312 tristate "HPT 343/363 PATA support (Experimental)" 313 depends on PCI 314 help 315 This option enables support for the HPT 343/363 316 PATA controllers via the new ATA layer 317 318 If unsure, say N. 319 320config PATA_ISAPNP 321 tristate "ISA Plug and Play PATA support (Experimental)" 322 depends on EXPERIMENTAL && ISAPNP 323 help 324 This option enables support for ISA plug & play ATA 325 controllers such as those found on old soundcards. 326 327 If unsure, say N. 328 329config PATA_IT821X 330 tristate "IT8211/2 PATA support" 331 depends on PCI 332 help 333 This option enables support for the ITE 8211 and 8212 334 PATA controllers via the new ATA layer, including RAID 335 mode. 336 337 If unsure, say N. 338 339config PATA_IT8213 340 tristate "IT8213 PATA support (Experimental)" 341 depends on PCI && EXPERIMENTAL 342 help 343 This option enables support for the ITE 821 PATA 344 controllers via the new ATA layer. 345 346 If unsure, say N. 347 348config PATA_JMICRON 349 tristate "JMicron PATA support" 350 depends on PCI 351 help 352 Enable support for the JMicron IDE controller, via the new 353 ATA layer. 354 355 If unsure, say N. 356 357config PATA_LEGACY 358 tristate "Legacy ISA PATA support (Experimental)" 359 depends on ISA && EXPERIMENTAL 360 help 361 This option enables support for ISA/VLB bus legacy PATA 362 ports and allows them to be accessed via the new ATA layer. 363 364 If unsure, say N. 365 366config PATA_TRIFLEX 367 tristate "Compaq Triflex PATA support" 368 depends on PCI 369 help 370 Enable support for the Compaq 'Triflex' IDE controller as found 371 on many Compaq Pentium-Pro systems, via the new ATA layer. 372 373 If unsure, say N. 374 375config PATA_MARVELL 376 tristate "Marvell PATA support via legacy mode" 377 depends on PCI 378 help 379 This option enables limited support for the Marvell 88SE6145 ATA 380 controller. 381 382 If unsure, say N. 383 384config PATA_MPC52xx 385 tristate "Freescale MPC52xx SoC internal IDE" 386 depends on PPC_MPC52xx 387 help 388 This option enables support for integrated IDE controller 389 of the Freescale MPC52xx SoC. 390 391 If unsure, say N. 392 393config PATA_MPIIX 394 tristate "Intel PATA MPIIX support" 395 depends on PCI 396 help 397 This option enables support for MPIIX PATA support. 398 399 If unsure, say N. 400 401config PATA_OLDPIIX 402 tristate "Intel PATA old PIIX support" 403 depends on PCI 404 help 405 This option enables support for early PIIX PATA support. 406 407 If unsure, say N. 408 409config PATA_NETCELL 410 tristate "NETCELL Revolution RAID support" 411 depends on PCI 412 help 413 This option enables support for the Netcell Revolution RAID 414 PATA controller. 415 416 If unsure, say N. 417 418config PATA_NS87410 419 tristate "Nat Semi NS87410 PATA support (Experimental)" 420 depends on PCI && EXPERIMENTAL 421 help 422 This option enables support for the National Semiconductor 423 NS87410 PCI-IDE controller. 424 425 If unsure, say N. 426 427config PATA_OPTI 428 tristate "OPTI621/6215 PATA support (Very Experimental)" 429 depends on PCI && EXPERIMENTAL 430 help 431 This option enables full PIO support for the early Opti ATA 432 controllers found on some old motherboards. 433 434 If unsure, say N. 435 436config PATA_OPTIDMA 437 tristate "OPTI FireStar PATA support (Very Experimental)" 438 depends on PCI && EXPERIMENTAL 439 help 440 This option enables DMA/PIO support for the later OPTi 441 controllers found on some old motherboards and in some 442 laptops. 443 444 If unsure, say N. 445 446config PATA_PCMCIA 447 tristate "PCMCIA PATA support" 448 depends on PCMCIA 449 help 450 This option enables support for PCMCIA ATA interfaces, including 451 compact flash card adapters via the new ATA layer. 452 453 If unsure, say N. 454 455config PATA_PDC_OLD 456 tristate "Older Promise PATA controller support (Experimental)" 457 depends on PCI && EXPERIMENTAL 458 help 459 This option enables support for the Promise 20246, 20262, 20263, 460 20265 and 20267 adapters. 461 462 If unsure, say N. 463 464config PATA_QDI 465 tristate "QDI VLB PATA support" 466 depends on ISA 467 help 468 Support for QDI 6500 and 6580 PATA controllers on VESA local bus. 469 470config PATA_RADISYS 471 tristate "RADISYS 82600 PATA support (Very Experimental)" 472 depends on PCI && EXPERIMENTAL 473 help 474 This option enables support for the RADISYS 82600 475 PATA controllers via the new ATA layer 476 477 If unsure, say N. 478 479config PATA_RZ1000 480 tristate "PC Tech RZ1000 PATA support" 481 depends on PCI 482 help 483 This option enables basic support for the PC Tech RZ1000/1 484 PATA controllers via the new ATA layer 485 486 If unsure, say N. 487 488config PATA_SC1200 489 tristate "SC1200 PATA support (Very Experimental)" 490 depends on PCI && EXPERIMENTAL 491 help 492 This option enables support for the NatSemi/AMD SC1200 SoC 493 companion chip used with the Geode processor family. 494 495 If unsure, say N. 496 497config PATA_SERVERWORKS 498 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" 499 depends on PCI 500 help 501 This option enables support for the Serverworks OSB4/CSB5/CSB6 and 502 HT1000 PATA controllers, via the new ATA layer. 503 504 If unsure, say N. 505 506config PATA_PDC2027X 507 tristate "Promise PATA 2027x support" 508 depends on PCI 509 help 510 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. 511 512 If unsure, say N. 513 514config PATA_SIL680 515 tristate "CMD / Silicon Image 680 PATA support" 516 depends on PCI 517 help 518 This option enables support for CMD / Silicon Image 680 PATA. 519 520 If unsure, say N. 521 522config PATA_SIS 523 tristate "SiS PATA support (Experimental)" 524 depends on PCI && EXPERIMENTAL 525 help 526 This option enables support for SiS PATA controllers 527 528 If unsure, say N. 529 530config PATA_VIA 531 tristate "VIA PATA support" 532 depends on PCI 533 help 534 This option enables support for the VIA PATA interfaces 535 found on the many VIA chipsets. 536 537 If unsure, say N. 538 539config PATA_WINBOND 540 tristate "Winbond SL82C105 PATA support" 541 depends on PCI 542 help 543 This option enables support for SL82C105 PATA devices found in the 544 Netwinder and some other systems 545 546 If unsure, say N. 547 548config PATA_WINBOND_VLB 549 tristate "Winbond W83759A VLB PATA support (Experimental)" 550 depends on ISA && EXPERIMENTAL 551 help 552 Support for the Winbond W83759A controller on Vesa Local Bus 553 systems. 554 555config PATA_PLATFORM 556 tristate "Generic platform device PATA support" 557 depends on EMBEDDED || ARCH_RPC 558 help 559 This option enables support for generic directly connected ATA 560 devices commonly found on embedded systems. 561 562 If unsure, say N. 563 564config PATA_ICSIDE 565 tristate "Acorn ICS PATA support" 566 depends on ARM && ARCH_ACORN 567 help 568 On Acorn systems, say Y here if you wish to use the ICS PATA 569 interface card. This is not required for ICS partition support. 570 If you are unsure, say N to this. 571 572config PATA_IXP4XX_CF 573 tristate "IXP4XX Compact Flash support" 574 depends on ARCH_IXP4XX 575 help 576 This option enables support for a Compact Flash connected on 577 the ixp4xx expansion bus. This driver had been written for 578 Loft/Avila boards in mind but can work with others. 579 580 If unsure, say N. 581 582config PATA_SCC 583 tristate "Toshiba's Cell Reference Set IDE support" 584 depends on PCI && PPC_CELLEB 585 help 586 This option enables support for the built-in IDE controller on 587 Toshiba Cell Reference Board. 588 589 If unsure, say N. 590 591endif # ATA 592