1# 2# SATA/PATA driver configuration 3# 4 5config HAVE_PATA_PLATFORM 6 bool 7 help 8 This is an internal configuration node for any machine that 9 uses pata-platform driver to enable the relevant driver in the 10 configuration structure without having to submit endless patches 11 to update the PATA_PLATFORM entry. 12 13menuconfig ATA 14 tristate "Serial ATA and Parallel ATA drivers (libata)" 15 depends on HAS_IOMEM 16 depends on BLOCK 17 depends on !(M32R || M68K || S390) || BROKEN 18 select SCSI 19 select GLOB 20 ---help--- 21 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or 22 any other ATA device under Linux, say Y and make sure that you know 23 the name of your ATA host adapter (the card inside your computer 24 that "speaks" the ATA protocol, also called ATA controller), 25 because you will be asked for it. 26 27 NOTE: ATA enables basic SCSI support; *however*, 28 'SCSI disk support', 'SCSI tape support', or 29 'SCSI CDROM support' may also be needed, 30 depending on your hardware configuration. 31 32if ATA 33 34config ATA_NONSTANDARD 35 bool 36 default n 37 38config ATA_VERBOSE_ERROR 39 bool "Verbose ATA error reporting" 40 default y 41 help 42 This option adds parsing of ATA command descriptions and error bits 43 in libata kernel output, making it easier to interpret. 44 This option will enlarge the kernel by approx. 6KB. Disable it only 45 if kernel size is more important than ease of debugging. 46 47 If unsure, say Y. 48 49config ATA_ACPI 50 bool "ATA ACPI Support" 51 depends on ACPI 52 default y 53 help 54 This option adds support for ATA-related ACPI objects. 55 These ACPI objects add the ability to retrieve taskfiles 56 from the ACPI BIOS and write them to the disk controller. 57 These objects may be related to performance, security, 58 power management, or other areas. 59 You can disable this at kernel boot time by using the 60 option libata.noacpi=1 61 62config SATA_ZPODD 63 bool "SATA Zero Power Optical Disc Drive (ZPODD) support" 64 depends on ATA_ACPI && PM 65 default n 66 help 67 This option adds support for SATA Zero Power Optical Disc 68 Drive (ZPODD). It requires both the ODD and the platform 69 support, and if enabled, will automatically power on/off the 70 ODD when certain condition is satisfied. This does not impact 71 end user's experience of the ODD, only power is saved when 72 the ODD is not in use (i.e. no disc inside). 73 74 If unsure, say N. 75 76config SATA_PMP 77 bool "SATA Port Multiplier support" 78 default y 79 help 80 This option adds support for SATA Port Multipliers 81 (the SATA version of an ethernet hub, or SAS expander). 82 83comment "Controllers with non-SFF native interface" 84 85config SATA_AHCI 86 tristate "AHCI SATA support" 87 depends on PCI 88 help 89 This option enables support for AHCI Serial ATA. 90 91 If unsure, say N. 92 93config SATA_AHCI_PLATFORM 94 tristate "Platform AHCI SATA support" 95 help 96 This option enables support for Platform AHCI Serial ATA 97 controllers. 98 99 If unsure, say N. 100 101config AHCI_BRCMSTB 102 tristate "Broadcom STB AHCI SATA support" 103 depends on ARCH_BRCMSTB || BMIPS_GENERIC 104 help 105 This option enables support for the AHCI SATA3 controller found on 106 STB SoC's. 107 108 If unsure, say N. 109 110config AHCI_DA850 111 tristate "DaVinci DA850 AHCI SATA support" 112 depends on ARCH_DAVINCI_DA850 113 help 114 This option enables support for the DaVinci DA850 SoC's 115 onboard AHCI SATA. 116 117 If unsure, say N. 118 119config AHCI_ST 120 tristate "ST AHCI SATA support" 121 depends on ARCH_STI 122 help 123 This option enables support for ST AHCI SATA controller. 124 125 If unsure, say N. 126 127config AHCI_IMX 128 tristate "Freescale i.MX AHCI SATA support" 129 depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) 130 help 131 This option enables support for the Freescale i.MX SoC's 132 onboard AHCI SATA. 133 134 If unsure, say N. 135 136config AHCI_CEVA 137 tristate "CEVA AHCI SATA support" 138 depends on OF 139 help 140 This option enables support for the CEVA AHCI SATA. 141 It can be found on the Xilinx Zynq UltraScale+ MPSoC. 142 143 If unsure, say N. 144 145config AHCI_MVEBU 146 tristate "Marvell EBU AHCI SATA support" 147 depends on ARCH_MVEBU 148 help 149 This option enables support for the Marvebu EBU SoC's 150 onboard AHCI SATA. 151 152 If unsure, say N. 153 154config AHCI_OCTEON 155 tristate "Cavium Octeon Soc Serial ATA" 156 depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC 157 default y 158 help 159 This option enables support for Cavium Octeon SoC Serial ATA. 160 161 If unsure, say N. 162 163config AHCI_SUNXI 164 tristate "Allwinner sunxi AHCI SATA support" 165 depends on ARCH_SUNXI 166 help 167 This option enables support for the Allwinner sunxi SoC's 168 onboard AHCI SATA. 169 170 If unsure, say N. 171 172config AHCI_TEGRA 173 tristate "NVIDIA Tegra124 AHCI SATA support" 174 depends on ARCH_TEGRA 175 help 176 This option enables support for the NVIDIA Tegra124 SoC's 177 onboard AHCI SATA. 178 179 If unsure, say N. 180 181config AHCI_XGENE 182 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" 183 depends on PHY_XGENE 184 help 185 This option enables support for APM X-Gene SoC SATA host controller. 186 187config AHCI_QORIQ 188 tristate "Freescale QorIQ AHCI SATA support" 189 depends on OF 190 help 191 This option enables support for the Freescale QorIQ AHCI SoC's 192 onboard AHCI SATA. 193 194 If unsure, say N. 195 196config SATA_FSL 197 tristate "Freescale 3.0Gbps SATA support" 198 depends on FSL_SOC 199 help 200 This option enables support for Freescale 3.0Gbps SATA controller. 201 It can be found on MPC837x and MPC8315. 202 203 If unsure, say N. 204 205config SATA_AHCI_SEATTLE 206 tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" 207 depends on ARCH_SEATTLE 208 help 209 This option enables support for AMD Seattle SATA host controller. 210 211 If unsure, say N 212 213config SATA_INIC162X 214 tristate "Initio 162x SATA support (Very Experimental)" 215 depends on PCI 216 help 217 This option enables support for Initio 162x Serial ATA. 218 219config SATA_ACARD_AHCI 220 tristate "ACard AHCI variant (ATP 8620)" 221 depends on PCI 222 help 223 This option enables support for Acard. 224 225 If unsure, say N. 226 227config SATA_SIL24 228 tristate "Silicon Image 3124/3132 SATA support" 229 depends on PCI 230 help 231 This option enables support for Silicon Image 3124/3132 Serial ATA. 232 233 If unsure, say N. 234 235config ATA_SFF 236 bool "ATA SFF support (for legacy IDE and PATA)" 237 default y 238 help 239 This option adds support for ATA controllers with SFF 240 compliant or similar programming interface. 241 242 SFF is the legacy IDE interface that has been around since 243 the dawn of time. Almost all PATA controllers have an 244 SFF interface. Many SATA controllers have an SFF interface 245 when configured into a legacy compatibility mode. 246 247 For users with exclusively modern controllers like AHCI, 248 Silicon Image 3124, or Marvell 6440, you may choose to 249 disable this unneeded SFF support. 250 251 If unsure, say Y. 252 253if ATA_SFF 254 255comment "SFF controllers with custom DMA interface" 256 257config PDC_ADMA 258 tristate "Pacific Digital ADMA support" 259 depends on PCI 260 help 261 This option enables support for Pacific Digital ADMA controllers 262 263 If unsure, say N. 264 265config PATA_OCTEON_CF 266 tristate "OCTEON Boot Bus Compact Flash support" 267 depends on CAVIUM_OCTEON_SOC 268 help 269 This option enables a polled compact flash driver for use with 270 compact flash cards attached to the OCTEON boot bus. 271 272 If unsure, say N. 273 274config SATA_QSTOR 275 tristate "Pacific Digital SATA QStor support" 276 depends on PCI 277 help 278 This option enables support for Pacific Digital Serial ATA QStor. 279 280 If unsure, say N. 281 282config SATA_SX4 283 tristate "Promise SATA SX4 support (Experimental)" 284 depends on PCI 285 help 286 This option enables support for Promise Serial ATA SX4. 287 288 If unsure, say N. 289 290config ATA_BMDMA 291 bool "ATA BMDMA support" 292 default y 293 help 294 This option adds support for SFF ATA controllers with BMDMA 295 capability. BMDMA stands for bus-master DMA and is the 296 de facto DMA interface for SFF controllers. 297 298 If unsure, say Y. 299 300if ATA_BMDMA 301 302comment "SATA SFF controllers with BMDMA" 303 304config ATA_PIIX 305 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" 306 depends on PCI 307 help 308 This option enables support for ICH5/6/7/8 Serial ATA 309 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series 310 host controllers. 311 312 If unsure, say N. 313 314config SATA_DWC 315 tristate "DesignWare Cores SATA support" 316 depends on 460EX 317 select DW_DMAC 318 help 319 This option enables support for the on-chip SATA controller of the 320 AppliedMicro processor 460EX. 321 322 If unsure, say N. 323 324config SATA_DWC_DEBUG 325 bool "Debugging driver version" 326 depends on SATA_DWC 327 help 328 This option enables debugging output in the driver. 329 330config SATA_DWC_VDEBUG 331 bool "Verbose debug output" 332 depends on SATA_DWC_DEBUG 333 help 334 This option enables the taskfile dumping and NCQ debugging. 335 336config SATA_HIGHBANK 337 tristate "Calxeda Highbank SATA support" 338 depends on ARCH_HIGHBANK || COMPILE_TEST 339 help 340 This option enables support for the Calxeda Highbank SoC's 341 onboard SATA. 342 343 If unsure, say N. 344 345config SATA_MV 346 tristate "Marvell SATA support" 347 depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ 348 ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST 349 select GENERIC_PHY 350 help 351 This option enables support for the Marvell Serial ATA family. 352 Currently supports 88SX[56]0[48][01] PCI(-X) chips, 353 as well as the newer [67]042 PCI-X/PCIe and SOC devices. 354 355 If unsure, say N. 356 357config SATA_NV 358 tristate "NVIDIA SATA support" 359 depends on PCI 360 help 361 This option enables support for NVIDIA Serial ATA. 362 363 If unsure, say N. 364 365config SATA_PROMISE 366 tristate "Promise SATA TX2/TX4 support" 367 depends on PCI 368 help 369 This option enables support for Promise Serial ATA TX2/TX4. 370 371 If unsure, say N. 372 373config SATA_RCAR 374 tristate "Renesas R-Car SATA support" 375 depends on ARCH_RENESAS || COMPILE_TEST 376 help 377 This option enables support for Renesas R-Car Serial ATA. 378 379 If unsure, say N. 380 381config SATA_SIL 382 tristate "Silicon Image SATA support" 383 depends on PCI 384 help 385 This option enables support for Silicon Image Serial ATA. 386 387 If unsure, say N. 388 389config SATA_SIS 390 tristate "SiS 964/965/966/180 SATA support" 391 depends on PCI 392 select PATA_SIS 393 help 394 This option enables support for SiS Serial ATA on 395 SiS 964/965/966/180 and Parallel ATA on SiS 180. 396 The PATA support for SiS 180 requires additionally to 397 enable the PATA_SIS driver in the config. 398 If unsure, say N. 399 400config SATA_SVW 401 tristate "ServerWorks Frodo / Apple K2 SATA support" 402 depends on PCI 403 help 404 This option enables support for Broadcom/Serverworks/Apple K2 405 SATA support. 406 407 If unsure, say N. 408 409config SATA_ULI 410 tristate "ULi Electronics SATA support" 411 depends on PCI 412 help 413 This option enables support for ULi Electronics SATA. 414 415 If unsure, say N. 416 417config SATA_VIA 418 tristate "VIA SATA support" 419 depends on PCI 420 help 421 This option enables support for VIA Serial ATA. 422 423 If unsure, say N. 424 425config SATA_VITESSE 426 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" 427 depends on PCI 428 help 429 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. 430 431 If unsure, say N. 432 433comment "PATA SFF controllers with BMDMA" 434 435config PATA_ALI 436 tristate "ALi PATA support" 437 depends on PCI 438 help 439 This option enables support for the ALi ATA interfaces 440 found on the many ALi chipsets. 441 442 If unsure, say N. 443 444config PATA_AMD 445 tristate "AMD/NVidia PATA support" 446 depends on PCI 447 help 448 This option enables support for the AMD and NVidia PATA 449 interfaces found on the chipsets for Athlon/Athlon64. 450 451 If unsure, say N. 452 453config PATA_ARASAN_CF 454 tristate "ARASAN CompactFlash PATA Controller Support" 455 depends on ARCH_SPEAR13XX || COMPILE_TEST 456 depends on DMADEVICES 457 select DMA_ENGINE 458 help 459 Say Y here to support the ARASAN CompactFlash PATA controller 460 461config PATA_ARTOP 462 tristate "ARTOP 6210/6260 PATA support" 463 depends on PCI 464 help 465 This option enables support for ARTOP PATA controllers. 466 467 If unsure, say N. 468 469config PATA_ATIIXP 470 tristate "ATI PATA support" 471 depends on PCI 472 help 473 This option enables support for the ATI ATA interfaces 474 found on the many ATI chipsets. 475 476 If unsure, say N. 477 478config PATA_ATP867X 479 tristate "ARTOP/Acard ATP867X PATA support" 480 depends on PCI 481 help 482 This option enables support for ARTOP/Acard ATP867X PATA 483 controllers. 484 485 If unsure, say N. 486 487config PATA_BF54X 488 tristate "Blackfin 54x ATAPI support" 489 depends on BF542 || BF548 || BF549 490 help 491 This option enables support for the built-in ATAPI controller on 492 Blackfin 54x family chips. 493 494 If unsure, say N. 495 496config PATA_CMD64X 497 tristate "CMD64x PATA support" 498 depends on PCI 499 help 500 This option enables support for the CMD64x series chips 501 except for the CMD640. 502 503 If unsure, say N. 504 505config PATA_CS5520 506 tristate "CS5510/5520 PATA support" 507 depends on PCI && (X86_32 || COMPILE_TEST) 508 help 509 This option enables support for the Cyrix 5510/5520 510 companion chip used with the MediaGX/Geode processor family. 511 512 If unsure, say N. 513 514config PATA_CS5530 515 tristate "CS5530 PATA support" 516 depends on PCI && (X86_32 || COMPILE_TEST) 517 help 518 This option enables support for the Cyrix/NatSemi/AMD CS5530 519 companion chip used with the MediaGX/Geode processor family. 520 521 If unsure, say N. 522 523config PATA_CS5535 524 tristate "CS5535 PATA support (Experimental)" 525 depends on PCI && X86_32 526 help 527 This option enables support for the NatSemi/AMD CS5535 528 companion chip used with the Geode processor family. 529 530 If unsure, say N. 531 532config PATA_CS5536 533 tristate "CS5536 PATA support" 534 depends on PCI && (X86_32 || MIPS || COMPILE_TEST) 535 help 536 This option enables support for the AMD CS5536 537 companion chip used with the Geode LX processor family. 538 539 If unsure, say N. 540 541config PATA_CYPRESS 542 tristate "Cypress CY82C693 PATA support (Very Experimental)" 543 depends on PCI 544 help 545 This option enables support for the Cypress/Contaq CY82C693 546 chipset found in some Alpha systems 547 548 If unsure, say N. 549 550config PATA_EFAR 551 tristate "EFAR SLC90E66 support" 552 depends on PCI 553 help 554 This option enables support for the EFAR SLC90E66 555 IDE controller found on some older machines. 556 557 If unsure, say N. 558 559config PATA_EP93XX 560 tristate "Cirrus Logic EP93xx PATA support" 561 depends on ARCH_EP93XX 562 help 563 This option enables support for the PATA controller in 564 the Cirrus Logic EP9312 and EP9315 ARM CPU. 565 566 If unsure, say N. 567 568config PATA_HPT366 569 tristate "HPT 366/368 PATA support" 570 depends on PCI 571 help 572 This option enables support for the HPT 366 and 368 573 PATA controllers via the new ATA layer. 574 575 If unsure, say N. 576 577config PATA_HPT37X 578 tristate "HPT 370/370A/371/372/374/302 PATA support" 579 depends on PCI 580 help 581 This option enables support for the majority of the later HPT 582 PATA controllers via the new ATA layer. 583 584 If unsure, say N. 585 586config PATA_HPT3X2N 587 tristate "HPT 371N/372N/302N PATA support" 588 depends on PCI 589 help 590 This option enables support for the N variant HPT PATA 591 controllers via the new ATA layer. 592 593 If unsure, say N. 594 595config PATA_HPT3X3 596 tristate "HPT 343/363 PATA support" 597 depends on PCI 598 help 599 This option enables support for the HPT 343/363 600 PATA controllers via the new ATA layer 601 602 If unsure, say N. 603 604config PATA_HPT3X3_DMA 605 bool "HPT 343/363 DMA support" 606 depends on PATA_HPT3X3 607 help 608 This option enables DMA support for the HPT343/363 609 controllers. Enable with care as there are still some 610 problems with DMA on this chipset. 611 612config PATA_ICSIDE 613 tristate "Acorn ICS PATA support" 614 depends on ARM && ARCH_ACORN 615 help 616 On Acorn systems, say Y here if you wish to use the ICS PATA 617 interface card. This is not required for ICS partition support. 618 If you are unsure, say N to this. 619 620config PATA_IMX 621 tristate "PATA support for Freescale iMX" 622 depends on ARCH_MXC 623 help 624 This option enables support for the PATA host available on Freescale 625 iMX SoCs. 626 627 If unsure, say N. 628 629config PATA_IT8213 630 tristate "IT8213 PATA support (Experimental)" 631 depends on PCI 632 help 633 This option enables support for the ITE 821 PATA 634 controllers via the new ATA layer. 635 636 If unsure, say N. 637 638config PATA_IT821X 639 tristate "IT8211/2 PATA support" 640 depends on PCI 641 help 642 This option enables support for the ITE 8211 and 8212 643 PATA controllers via the new ATA layer, including RAID 644 mode. 645 646 If unsure, say N. 647 648config PATA_JMICRON 649 tristate "JMicron PATA support" 650 depends on PCI 651 help 652 Enable support for the JMicron IDE controller, via the new 653 ATA layer. 654 655 If unsure, say N. 656 657config PATA_MACIO 658 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" 659 depends on PPC_PMAC 660 help 661 Most IDE capable PowerMacs have IDE busses driven by a variant 662 of this controller which is part of the Apple chipset used on 663 most PowerMac models. Some models have multiple busses using 664 different chipsets, though generally, MacIO is one of them. 665 666config PATA_MARVELL 667 tristate "Marvell PATA support via legacy mode" 668 depends on PCI 669 help 670 This option enables limited support for the Marvell 88SE61xx ATA 671 controllers. If you wish to use only the SATA ports then select 672 the AHCI driver alone. If you wish to the use the PATA port or 673 both SATA and PATA include this driver. 674 675 If unsure, say N. 676 677config PATA_MPC52xx 678 tristate "Freescale MPC52xx SoC internal IDE" 679 depends on PPC_MPC52xx && PPC_BESTCOMM 680 select PPC_BESTCOMM_ATA 681 help 682 This option enables support for integrated IDE controller 683 of the Freescale MPC52xx SoC. 684 685 If unsure, say N. 686 687config PATA_NETCELL 688 tristate "NETCELL Revolution RAID support" 689 depends on PCI 690 help 691 This option enables support for the Netcell Revolution RAID 692 PATA controller. 693 694 If unsure, say N. 695 696config PATA_NINJA32 697 tristate "Ninja32/Delkin Cardbus ATA support" 698 depends on PCI 699 help 700 This option enables support for the Ninja32, Delkin and 701 possibly other brands of Cardbus ATA adapter 702 703 If unsure, say N. 704 705config PATA_NS87415 706 tristate "Nat Semi NS87415 PATA support" 707 depends on PCI 708 help 709 This option enables support for the National Semiconductor 710 NS87415 PCI-IDE controller. 711 712 If unsure, say N. 713 714config PATA_OLDPIIX 715 tristate "Intel PATA old PIIX support" 716 depends on PCI 717 help 718 This option enables support for early PIIX PATA support. 719 720 If unsure, say N. 721 722config PATA_OPTIDMA 723 tristate "OPTI FireStar PATA support (Very Experimental)" 724 depends on PCI 725 help 726 This option enables DMA/PIO support for the later OPTi 727 controllers found on some old motherboards and in some 728 laptops. 729 730 If unsure, say N. 731 732config PATA_PDC2027X 733 tristate "Promise PATA 2027x support" 734 depends on PCI 735 help 736 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. 737 738 If unsure, say N. 739 740config PATA_PDC_OLD 741 tristate "Older Promise PATA controller support" 742 depends on PCI 743 help 744 This option enables support for the Promise 20246, 20262, 20263, 745 20265 and 20267 adapters. 746 747 If unsure, say N. 748 749config PATA_RADISYS 750 tristate "RADISYS 82600 PATA support (Experimental)" 751 depends on PCI 752 help 753 This option enables support for the RADISYS 82600 754 PATA controllers via the new ATA layer 755 756 If unsure, say N. 757 758config PATA_RDC 759 tristate "RDC PATA support" 760 depends on PCI 761 help 762 This option enables basic support for the later RDC PATA controllers 763 controllers via the new ATA layer. For the RDC 1010, you need to 764 enable the IT821X driver instead. 765 766 If unsure, say N. 767 768config PATA_SC1200 769 tristate "SC1200 PATA support" 770 depends on PCI && (X86_32 || COMPILE_TEST) 771 help 772 This option enables support for the NatSemi/AMD SC1200 SoC 773 companion chip used with the Geode processor family. 774 775 If unsure, say N. 776 777config PATA_SCH 778 tristate "Intel SCH PATA support" 779 depends on PCI 780 help 781 This option enables support for Intel SCH PATA on the Intel 782 SCH (US15W, US15L, UL11L) series host controllers. 783 784 If unsure, say N. 785 786config PATA_SERVERWORKS 787 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" 788 depends on PCI 789 help 790 This option enables support for the Serverworks OSB4/CSB5/CSB6 and 791 HT1000 PATA controllers, via the new ATA layer. 792 793 If unsure, say N. 794 795config PATA_SIL680 796 tristate "CMD / Silicon Image 680 PATA support" 797 depends on PCI 798 help 799 This option enables support for CMD / Silicon Image 680 PATA. 800 801 If unsure, say N. 802 803config PATA_SIS 804 tristate "SiS PATA support" 805 depends on PCI 806 help 807 This option enables support for SiS PATA controllers 808 809 If unsure, say N. 810 811config PATA_TOSHIBA 812 tristate "Toshiba Piccolo support (Experimental)" 813 depends on PCI 814 help 815 Support for the Toshiba Piccolo controllers. Currently only the 816 primary channel is supported by this driver. 817 818 If unsure, say N. 819 820config PATA_TRIFLEX 821 tristate "Compaq Triflex PATA support" 822 depends on PCI 823 help 824 Enable support for the Compaq 'Triflex' IDE controller as found 825 on many Compaq Pentium-Pro systems, via the new ATA layer. 826 827 If unsure, say N. 828 829config PATA_VIA 830 tristate "VIA PATA support" 831 depends on PCI 832 help 833 This option enables support for the VIA PATA interfaces 834 found on the many VIA chipsets. 835 836 If unsure, say N. 837 838config PATA_PXA 839 tristate "PXA DMA-capable PATA support" 840 depends on ARCH_PXA 841 help 842 This option enables support for harddrive attached to PXA CPU's bus. 843 844 NOTE: This driver utilizes PXA DMA controller, in case your hardware 845 is not capable of doing MWDMA, use pata_platform instead. 846 847 If unsure, say N. 848 849config PATA_WINBOND 850 tristate "Winbond SL82C105 PATA support" 851 depends on PCI 852 help 853 This option enables support for SL82C105 PATA devices found in the 854 Netwinder and some other systems 855 856 If unsure, say N. 857 858endif # ATA_BMDMA 859 860comment "PIO-only SFF controllers" 861 862config PATA_AT32 863 tristate "Atmel AVR32 PATA support (Experimental)" 864 depends on AVR32 && PLATFORM_AT32AP 865 help 866 This option enables support for the IDE devices on the 867 Atmel AT32AP platform. 868 869 If unsure, say N. 870 871config PATA_AT91 872 tristate "PATA support for AT91SAM9260" 873 depends on ARM && SOC_AT91SAM9 874 help 875 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. 876 877 If unsure, say N. 878 879config PATA_CMD640_PCI 880 tristate "CMD640 PCI PATA support (Experimental)" 881 depends on PCI 882 help 883 This option enables support for the CMD640 PCI IDE 884 interface chip. Only the primary channel is currently 885 supported. 886 887 If unsure, say N. 888 889config PATA_ISAPNP 890 tristate "ISA Plug and Play PATA support" 891 depends on ISAPNP 892 help 893 This option enables support for ISA plug & play ATA 894 controllers such as those found on old soundcards. 895 896 If unsure, say N. 897 898config PATA_IXP4XX_CF 899 tristate "IXP4XX Compact Flash support" 900 depends on ARCH_IXP4XX 901 help 902 This option enables support for a Compact Flash connected on 903 the ixp4xx expansion bus. This driver had been written for 904 Loft/Avila boards in mind but can work with others. 905 906 If unsure, say N. 907 908config PATA_MPIIX 909 tristate "Intel PATA MPIIX support" 910 depends on PCI 911 help 912 This option enables support for MPIIX PATA support. 913 914 If unsure, say N. 915 916config PATA_NS87410 917 tristate "Nat Semi NS87410 PATA support" 918 depends on PCI 919 help 920 This option enables support for the National Semiconductor 921 NS87410 PCI-IDE controller. 922 923 If unsure, say N. 924 925config PATA_OPTI 926 tristate "OPTI621/6215 PATA support (Very Experimental)" 927 depends on PCI 928 help 929 This option enables full PIO support for the early Opti ATA 930 controllers found on some old motherboards. 931 932 If unsure, say N. 933 934config PATA_PALMLD 935 tristate "Palm LifeDrive PATA support" 936 depends on MACH_PALMLD 937 help 938 This option enables support for Palm LifeDrive's internal ATA 939 port via the new ATA layer. 940 941 If unsure, say N. 942 943config PATA_PCMCIA 944 tristate "PCMCIA PATA support" 945 depends on PCMCIA 946 help 947 This option enables support for PCMCIA ATA interfaces, including 948 compact flash card adapters via the new ATA layer. 949 950 If unsure, say N. 951 952config PATA_PLATFORM 953 tristate "Generic platform device PATA support" 954 depends on EXPERT || PPC || HAVE_PATA_PLATFORM 955 help 956 This option enables support for generic directly connected ATA 957 devices commonly found on embedded systems. 958 959 If unsure, say N. 960 961config PATA_OF_PLATFORM 962 tristate "OpenFirmware platform device PATA support" 963 depends on PATA_PLATFORM && OF 964 help 965 This option enables support for generic directly connected ATA 966 devices commonly found on embedded systems with OpenFirmware 967 bindings. 968 969 If unsure, say N. 970 971config PATA_QDI 972 tristate "QDI VLB PATA support" 973 depends on ISA 974 select PATA_LEGACY 975 help 976 Support for QDI 6500 and 6580 PATA controllers on VESA local bus. 977 978config PATA_RB532 979 tristate "RouterBoard 532 PATA CompactFlash support" 980 depends on MIKROTIK_RB532 981 help 982 This option enables support for the RouterBoard 532 983 PATA CompactFlash controller. 984 985 If unsure, say N. 986 987config PATA_RZ1000 988 tristate "PC Tech RZ1000 PATA support" 989 depends on PCI 990 help 991 This option enables basic support for the PC Tech RZ1000/1 992 PATA controllers via the new ATA layer 993 994 If unsure, say N. 995 996config PATA_SAMSUNG_CF 997 tristate "Samsung SoC PATA support" 998 depends on SAMSUNG_DEV_IDE 999 help 1000 This option enables basic support for Samsung's S3C/S5P board 1001 PATA controllers via the new ATA layer 1002 1003 If unsure, say N. 1004 1005config PATA_WINBOND_VLB 1006 tristate "Winbond W83759A VLB PATA support (Experimental)" 1007 depends on ISA 1008 select PATA_LEGACY 1009 help 1010 Support for the Winbond W83759A controller on Vesa Local Bus 1011 systems. 1012 1013comment "Generic fallback / legacy drivers" 1014 1015config PATA_ACPI 1016 tristate "ACPI firmware driver for PATA" 1017 depends on ATA_ACPI && ATA_BMDMA 1018 help 1019 This option enables an ACPI method driver which drives 1020 motherboard PATA controller interfaces through the ACPI 1021 firmware in the BIOS. This driver can sometimes handle 1022 otherwise unsupported hardware. 1023 1024config ATA_GENERIC 1025 tristate "Generic ATA support" 1026 depends on PCI && ATA_BMDMA 1027 help 1028 This option enables support for generic BIOS configured 1029 ATA controllers via the new ATA layer 1030 1031 If unsure, say N. 1032 1033config PATA_LEGACY 1034 tristate "Legacy ISA PATA support (Experimental)" 1035 depends on (ISA || PCI) 1036 help 1037 This option enables support for ISA/VLB/PCI bus legacy PATA 1038 ports and allows them to be accessed via the new ATA layer. 1039 1040 If unsure, say N. 1041 1042endif # ATA_SFF 1043endif # ATA 1044