1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * CPPC (Collaborative Processor Performance Control) methods used by CPUfreq drivers. 4 * 5 * (C) Copyright 2014, 2015 Linaro Ltd. 6 * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org> 7 * 8 * CPPC describes a few methods for controlling CPU performance using 9 * information from a per CPU table called CPC. This table is described in 10 * the ACPI v5.0+ specification. The table consists of a list of 11 * registers which may be memory mapped or hardware registers and also may 12 * include some static integer values. 13 * 14 * CPU performance is on an abstract continuous scale as against a discretized 15 * P-state scale which is tied to CPU frequency only. In brief, the basic 16 * operation involves: 17 * 18 * - OS makes a CPU performance request. (Can provide min and max bounds) 19 * 20 * - Platform (such as BMC) is free to optimize request within requested bounds 21 * depending on power/thermal budgets etc. 22 * 23 * - Platform conveys its decision back to OS 24 * 25 * The communication between OS and platform occurs through another medium 26 * called (PCC) Platform Communication Channel. This is a generic mailbox like 27 * mechanism which includes doorbell semantics to indicate register updates. 28 * See drivers/mailbox/pcc.c for details on PCC. 29 * 30 * Finer details about the PCC and CPPC spec are available in the ACPI v5.1 and 31 * above specifications. 32 */ 33 34 #define pr_fmt(fmt) "ACPI CPPC: " fmt 35 36 #include <linux/cpufreq.h> 37 #include <linux/delay.h> 38 #include <linux/iopoll.h> 39 #include <linux/ktime.h> 40 #include <linux/rwsem.h> 41 #include <linux/wait.h> 42 #include <linux/topology.h> 43 44 #include <acpi/cppc_acpi.h> 45 46 struct cppc_pcc_data { 47 struct mbox_chan *pcc_channel; 48 void __iomem *pcc_comm_addr; 49 bool pcc_channel_acquired; 50 unsigned int deadline_us; 51 unsigned int pcc_mpar, pcc_mrtt, pcc_nominal; 52 53 bool pending_pcc_write_cmd; /* Any pending/batched PCC write cmds? */ 54 bool platform_owns_pcc; /* Ownership of PCC subspace */ 55 unsigned int pcc_write_cnt; /* Running count of PCC write commands */ 56 57 /* 58 * Lock to provide controlled access to the PCC channel. 59 * 60 * For performance critical usecases(currently cppc_set_perf) 61 * We need to take read_lock and check if channel belongs to OSPM 62 * before reading or writing to PCC subspace 63 * We need to take write_lock before transferring the channel 64 * ownership to the platform via a Doorbell 65 * This allows us to batch a number of CPPC requests if they happen 66 * to originate in about the same time 67 * 68 * For non-performance critical usecases(init) 69 * Take write_lock for all purposes which gives exclusive access 70 */ 71 struct rw_semaphore pcc_lock; 72 73 /* Wait queue for CPUs whose requests were batched */ 74 wait_queue_head_t pcc_write_wait_q; 75 ktime_t last_cmd_cmpl_time; 76 ktime_t last_mpar_reset; 77 int mpar_count; 78 int refcount; 79 }; 80 81 /* Array to represent the PCC channel per subspace ID */ 82 static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES]; 83 /* The cpu_pcc_subspace_idx contains per CPU subspace ID */ 84 static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx); 85 86 /* 87 * The cpc_desc structure contains the ACPI register details 88 * as described in the per CPU _CPC tables. The details 89 * include the type of register (e.g. PCC, System IO, FFH etc.) 90 * and destination addresses which lets us READ/WRITE CPU performance 91 * information using the appropriate I/O methods. 92 */ 93 static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr); 94 95 /* pcc mapped address + header size + offset within PCC subspace */ 96 #define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \ 97 0x8 + (offs)) 98 99 /* Check if a CPC register is in PCC */ 100 #define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \ 101 (cpc)->cpc_entry.reg.space_id == \ 102 ACPI_ADR_SPACE_PLATFORM_COMM) 103 104 /* Evalutes to True if reg is a NULL register descriptor */ 105 #define IS_NULL_REG(reg) ((reg)->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY && \ 106 (reg)->address == 0 && \ 107 (reg)->bit_width == 0 && \ 108 (reg)->bit_offset == 0 && \ 109 (reg)->access_width == 0) 110 111 /* Evalutes to True if an optional cpc field is supported */ 112 #define CPC_SUPPORTED(cpc) ((cpc)->type == ACPI_TYPE_INTEGER ? \ 113 !!(cpc)->cpc_entry.int_value : \ 114 !IS_NULL_REG(&(cpc)->cpc_entry.reg)) 115 /* 116 * Arbitrary Retries in case the remote processor is slow to respond 117 * to PCC commands. Keeping it high enough to cover emulators where 118 * the processors run painfully slow. 119 */ 120 #define NUM_RETRIES 500ULL 121 122 struct cppc_attr { 123 struct attribute attr; 124 ssize_t (*show)(struct kobject *kobj, 125 struct attribute *attr, char *buf); 126 ssize_t (*store)(struct kobject *kobj, 127 struct attribute *attr, const char *c, ssize_t count); 128 }; 129 130 #define define_one_cppc_ro(_name) \ 131 static struct cppc_attr _name = \ 132 __ATTR(_name, 0444, show_##_name, NULL) 133 134 #define to_cpc_desc(a) container_of(a, struct cpc_desc, kobj) 135 136 #define show_cppc_data(access_fn, struct_name, member_name) \ 137 static ssize_t show_##member_name(struct kobject *kobj, \ 138 struct attribute *attr, char *buf) \ 139 { \ 140 struct cpc_desc *cpc_ptr = to_cpc_desc(kobj); \ 141 struct struct_name st_name = {0}; \ 142 int ret; \ 143 \ 144 ret = access_fn(cpc_ptr->cpu_id, &st_name); \ 145 if (ret) \ 146 return ret; \ 147 \ 148 return scnprintf(buf, PAGE_SIZE, "%llu\n", \ 149 (u64)st_name.member_name); \ 150 } \ 151 define_one_cppc_ro(member_name) 152 153 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, highest_perf); 154 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_perf); 155 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_perf); 156 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_nonlinear_perf); 157 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_freq); 158 show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_freq); 159 160 show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf); 161 show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time); 162 163 static ssize_t show_feedback_ctrs(struct kobject *kobj, 164 struct attribute *attr, char *buf) 165 { 166 struct cpc_desc *cpc_ptr = to_cpc_desc(kobj); 167 struct cppc_perf_fb_ctrs fb_ctrs = {0}; 168 int ret; 169 170 ret = cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs); 171 if (ret) 172 return ret; 173 174 return scnprintf(buf, PAGE_SIZE, "ref:%llu del:%llu\n", 175 fb_ctrs.reference, fb_ctrs.delivered); 176 } 177 define_one_cppc_ro(feedback_ctrs); 178 179 static struct attribute *cppc_attrs[] = { 180 &feedback_ctrs.attr, 181 &reference_perf.attr, 182 &wraparound_time.attr, 183 &highest_perf.attr, 184 &lowest_perf.attr, 185 &lowest_nonlinear_perf.attr, 186 &nominal_perf.attr, 187 &nominal_freq.attr, 188 &lowest_freq.attr, 189 NULL 190 }; 191 192 static struct kobj_type cppc_ktype = { 193 .sysfs_ops = &kobj_sysfs_ops, 194 .default_attrs = cppc_attrs, 195 }; 196 197 static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit) 198 { 199 int ret, status; 200 struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; 201 struct acpi_pcct_shared_memory __iomem *generic_comm_base = 202 pcc_ss_data->pcc_comm_addr; 203 204 if (!pcc_ss_data->platform_owns_pcc) 205 return 0; 206 207 /* 208 * Poll PCC status register every 3us(delay_us) for maximum of 209 * deadline_us(timeout_us) until PCC command complete bit is set(cond) 210 */ 211 ret = readw_relaxed_poll_timeout(&generic_comm_base->status, status, 212 status & PCC_CMD_COMPLETE_MASK, 3, 213 pcc_ss_data->deadline_us); 214 215 if (likely(!ret)) { 216 pcc_ss_data->platform_owns_pcc = false; 217 if (chk_err_bit && (status & PCC_ERROR_MASK)) 218 ret = -EIO; 219 } 220 221 if (unlikely(ret)) 222 pr_err("PCC check channel failed for ss: %d. ret=%d\n", 223 pcc_ss_id, ret); 224 225 return ret; 226 } 227 228 /* 229 * This function transfers the ownership of the PCC to the platform 230 * So it must be called while holding write_lock(pcc_lock) 231 */ 232 static int send_pcc_cmd(int pcc_ss_id, u16 cmd) 233 { 234 int ret = -EIO, i; 235 struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id]; 236 struct acpi_pcct_shared_memory __iomem *generic_comm_base = 237 pcc_ss_data->pcc_comm_addr; 238 unsigned int time_delta; 239 240 /* 241 * For CMD_WRITE we know for a fact the caller should have checked 242 * the channel before writing to PCC space 243 */ 244 if (cmd == CMD_READ) { 245 /* 246 * If there are pending cpc_writes, then we stole the channel 247 * before write completion, so first send a WRITE command to 248 * platform 249 */ 250 if (pcc_ss_data->pending_pcc_write_cmd) 251 send_pcc_cmd(pcc_ss_id, CMD_WRITE); 252 253 ret = check_pcc_chan(pcc_ss_id, false); 254 if (ret) 255 goto end; 256 } else /* CMD_WRITE */ 257 pcc_ss_data->pending_pcc_write_cmd = FALSE; 258 259 /* 260 * Handle the Minimum Request Turnaround Time(MRTT) 261 * "The minimum amount of time that OSPM must wait after the completion 262 * of a command before issuing the next command, in microseconds" 263 */ 264 if (pcc_ss_data->pcc_mrtt) { 265 time_delta = ktime_us_delta(ktime_get(), 266 pcc_ss_data->last_cmd_cmpl_time); 267 if (pcc_ss_data->pcc_mrtt > time_delta) 268 udelay(pcc_ss_data->pcc_mrtt - time_delta); 269 } 270 271 /* 272 * Handle the non-zero Maximum Periodic Access Rate(MPAR) 273 * "The maximum number of periodic requests that the subspace channel can 274 * support, reported in commands per minute. 0 indicates no limitation." 275 * 276 * This parameter should be ideally zero or large enough so that it can 277 * handle maximum number of requests that all the cores in the system can 278 * collectively generate. If it is not, we will follow the spec and just 279 * not send the request to the platform after hitting the MPAR limit in 280 * any 60s window 281 */ 282 if (pcc_ss_data->pcc_mpar) { 283 if (pcc_ss_data->mpar_count == 0) { 284 time_delta = ktime_ms_delta(ktime_get(), 285 pcc_ss_data->last_mpar_reset); 286 if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) { 287 pr_debug("PCC cmd for subspace %d not sent due to MPAR limit", 288 pcc_ss_id); 289 ret = -EIO; 290 goto end; 291 } 292 pcc_ss_data->last_mpar_reset = ktime_get(); 293 pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar; 294 } 295 pcc_ss_data->mpar_count--; 296 } 297 298 /* Write to the shared comm region. */ 299 writew_relaxed(cmd, &generic_comm_base->command); 300 301 /* Flip CMD COMPLETE bit */ 302 writew_relaxed(0, &generic_comm_base->status); 303 304 pcc_ss_data->platform_owns_pcc = true; 305 306 /* Ring doorbell */ 307 ret = mbox_send_message(pcc_ss_data->pcc_channel, &cmd); 308 if (ret < 0) { 309 pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n", 310 pcc_ss_id, cmd, ret); 311 goto end; 312 } 313 314 /* wait for completion and check for PCC errro bit */ 315 ret = check_pcc_chan(pcc_ss_id, true); 316 317 if (pcc_ss_data->pcc_mrtt) 318 pcc_ss_data->last_cmd_cmpl_time = ktime_get(); 319 320 if (pcc_ss_data->pcc_channel->mbox->txdone_irq) 321 mbox_chan_txdone(pcc_ss_data->pcc_channel, ret); 322 else 323 mbox_client_txdone(pcc_ss_data->pcc_channel, ret); 324 325 end: 326 if (cmd == CMD_WRITE) { 327 if (unlikely(ret)) { 328 for_each_possible_cpu(i) { 329 struct cpc_desc *desc = per_cpu(cpc_desc_ptr, i); 330 if (!desc) 331 continue; 332 333 if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt) 334 desc->write_cmd_status = ret; 335 } 336 } 337 pcc_ss_data->pcc_write_cnt++; 338 wake_up_all(&pcc_ss_data->pcc_write_wait_q); 339 } 340 341 return ret; 342 } 343 344 static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret) 345 { 346 if (ret < 0) 347 pr_debug("TX did not complete: CMD sent:%x, ret:%d\n", 348 *(u16 *)msg, ret); 349 else 350 pr_debug("TX completed. CMD sent:%x, ret:%d\n", 351 *(u16 *)msg, ret); 352 } 353 354 static struct mbox_client cppc_mbox_cl = { 355 .tx_done = cppc_chan_tx_done, 356 .knows_txdone = true, 357 }; 358 359 static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle) 360 { 361 int result = -EFAULT; 362 acpi_status status = AE_OK; 363 struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; 364 struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"}; 365 struct acpi_buffer state = {0, NULL}; 366 union acpi_object *psd = NULL; 367 struct acpi_psd_package *pdomain; 368 369 status = acpi_evaluate_object_typed(handle, "_PSD", NULL, 370 &buffer, ACPI_TYPE_PACKAGE); 371 if (status == AE_NOT_FOUND) /* _PSD is optional */ 372 return 0; 373 if (ACPI_FAILURE(status)) 374 return -ENODEV; 375 376 psd = buffer.pointer; 377 if (!psd || psd->package.count != 1) { 378 pr_debug("Invalid _PSD data\n"); 379 goto end; 380 } 381 382 pdomain = &(cpc_ptr->domain_info); 383 384 state.length = sizeof(struct acpi_psd_package); 385 state.pointer = pdomain; 386 387 status = acpi_extract_package(&(psd->package.elements[0]), 388 &format, &state); 389 if (ACPI_FAILURE(status)) { 390 pr_debug("Invalid _PSD data for CPU:%d\n", cpc_ptr->cpu_id); 391 goto end; 392 } 393 394 if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) { 395 pr_debug("Unknown _PSD:num_entries for CPU:%d\n", cpc_ptr->cpu_id); 396 goto end; 397 } 398 399 if (pdomain->revision != ACPI_PSD_REV0_REVISION) { 400 pr_debug("Unknown _PSD:revision for CPU: %d\n", cpc_ptr->cpu_id); 401 goto end; 402 } 403 404 if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL && 405 pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY && 406 pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) { 407 pr_debug("Invalid _PSD:coord_type for CPU:%d\n", cpc_ptr->cpu_id); 408 goto end; 409 } 410 411 result = 0; 412 end: 413 kfree(buffer.pointer); 414 return result; 415 } 416 417 bool acpi_cpc_valid(void) 418 { 419 struct cpc_desc *cpc_ptr; 420 int cpu; 421 422 for_each_possible_cpu(cpu) { 423 cpc_ptr = per_cpu(cpc_desc_ptr, cpu); 424 if (!cpc_ptr) 425 return false; 426 } 427 428 return true; 429 } 430 EXPORT_SYMBOL_GPL(acpi_cpc_valid); 431 432 /** 433 * acpi_get_psd_map - Map the CPUs in the freq domain of a given cpu 434 * @cpu: Find all CPUs that share a domain with cpu. 435 * @cpu_data: Pointer to CPU specific CPPC data including PSD info. 436 * 437 * Return: 0 for success or negative value for err. 438 */ 439 int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data) 440 { 441 struct cpc_desc *cpc_ptr, *match_cpc_ptr; 442 struct acpi_psd_package *match_pdomain; 443 struct acpi_psd_package *pdomain; 444 int count_target, i; 445 446 /* 447 * Now that we have _PSD data from all CPUs, let's setup P-state 448 * domain info. 449 */ 450 cpc_ptr = per_cpu(cpc_desc_ptr, cpu); 451 if (!cpc_ptr) 452 return -EFAULT; 453 454 pdomain = &(cpc_ptr->domain_info); 455 cpumask_set_cpu(cpu, cpu_data->shared_cpu_map); 456 if (pdomain->num_processors <= 1) 457 return 0; 458 459 /* Validate the Domain info */ 460 count_target = pdomain->num_processors; 461 if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL) 462 cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ALL; 463 else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL) 464 cpu_data->shared_type = CPUFREQ_SHARED_TYPE_HW; 465 else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY) 466 cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ANY; 467 468 for_each_possible_cpu(i) { 469 if (i == cpu) 470 continue; 471 472 match_cpc_ptr = per_cpu(cpc_desc_ptr, i); 473 if (!match_cpc_ptr) 474 goto err_fault; 475 476 match_pdomain = &(match_cpc_ptr->domain_info); 477 if (match_pdomain->domain != pdomain->domain) 478 continue; 479 480 /* Here i and cpu are in the same domain */ 481 if (match_pdomain->num_processors != count_target) 482 goto err_fault; 483 484 if (pdomain->coord_type != match_pdomain->coord_type) 485 goto err_fault; 486 487 cpumask_set_cpu(i, cpu_data->shared_cpu_map); 488 } 489 490 return 0; 491 492 err_fault: 493 /* Assume no coordination on any error parsing domain info */ 494 cpumask_clear(cpu_data->shared_cpu_map); 495 cpumask_set_cpu(cpu, cpu_data->shared_cpu_map); 496 cpu_data->shared_type = CPUFREQ_SHARED_TYPE_NONE; 497 498 return -EFAULT; 499 } 500 EXPORT_SYMBOL_GPL(acpi_get_psd_map); 501 502 static int register_pcc_channel(int pcc_ss_idx) 503 { 504 struct acpi_pcct_hw_reduced *cppc_ss; 505 u64 usecs_lat; 506 507 if (pcc_ss_idx >= 0) { 508 pcc_data[pcc_ss_idx]->pcc_channel = 509 pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx); 510 511 if (IS_ERR(pcc_data[pcc_ss_idx]->pcc_channel)) { 512 pr_err("Failed to find PCC channel for subspace %d\n", 513 pcc_ss_idx); 514 return -ENODEV; 515 } 516 517 /* 518 * The PCC mailbox controller driver should 519 * have parsed the PCCT (global table of all 520 * PCC channels) and stored pointers to the 521 * subspace communication region in con_priv. 522 */ 523 cppc_ss = (pcc_data[pcc_ss_idx]->pcc_channel)->con_priv; 524 525 if (!cppc_ss) { 526 pr_err("No PCC subspace found for %d CPPC\n", 527 pcc_ss_idx); 528 return -ENODEV; 529 } 530 531 /* 532 * cppc_ss->latency is just a Nominal value. In reality 533 * the remote processor could be much slower to reply. 534 * So add an arbitrary amount of wait on top of Nominal. 535 */ 536 usecs_lat = NUM_RETRIES * cppc_ss->latency; 537 pcc_data[pcc_ss_idx]->deadline_us = usecs_lat; 538 pcc_data[pcc_ss_idx]->pcc_mrtt = cppc_ss->min_turnaround_time; 539 pcc_data[pcc_ss_idx]->pcc_mpar = cppc_ss->max_access_rate; 540 pcc_data[pcc_ss_idx]->pcc_nominal = cppc_ss->latency; 541 542 pcc_data[pcc_ss_idx]->pcc_comm_addr = 543 acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length); 544 if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) { 545 pr_err("Failed to ioremap PCC comm region mem for %d\n", 546 pcc_ss_idx); 547 return -ENOMEM; 548 } 549 550 /* Set flag so that we don't come here for each CPU. */ 551 pcc_data[pcc_ss_idx]->pcc_channel_acquired = true; 552 } 553 554 return 0; 555 } 556 557 /** 558 * cpc_ffh_supported() - check if FFH reading supported 559 * 560 * Check if the architecture has support for functional fixed hardware 561 * read/write capability. 562 * 563 * Return: true for supported, false for not supported 564 */ 565 bool __weak cpc_ffh_supported(void) 566 { 567 return false; 568 } 569 570 /** 571 * pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace 572 * 573 * Check and allocate the cppc_pcc_data memory. 574 * In some processor configurations it is possible that same subspace 575 * is shared between multiple CPUs. This is seen especially in CPUs 576 * with hardware multi-threading support. 577 * 578 * Return: 0 for success, errno for failure 579 */ 580 static int pcc_data_alloc(int pcc_ss_id) 581 { 582 if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES) 583 return -EINVAL; 584 585 if (pcc_data[pcc_ss_id]) { 586 pcc_data[pcc_ss_id]->refcount++; 587 } else { 588 pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data), 589 GFP_KERNEL); 590 if (!pcc_data[pcc_ss_id]) 591 return -ENOMEM; 592 pcc_data[pcc_ss_id]->refcount++; 593 } 594 595 return 0; 596 } 597 598 /* Check if CPPC revision + num_ent combination is supported */ 599 static bool is_cppc_supported(int revision, int num_ent) 600 { 601 int expected_num_ent; 602 603 switch (revision) { 604 case CPPC_V2_REV: 605 expected_num_ent = CPPC_V2_NUM_ENT; 606 break; 607 case CPPC_V3_REV: 608 expected_num_ent = CPPC_V3_NUM_ENT; 609 break; 610 default: 611 pr_debug("Firmware exports unsupported CPPC revision: %d\n", 612 revision); 613 return false; 614 } 615 616 if (expected_num_ent != num_ent) { 617 pr_debug("Firmware exports %d entries. Expected: %d for CPPC rev:%d\n", 618 num_ent, expected_num_ent, revision); 619 return false; 620 } 621 622 return true; 623 } 624 625 /* 626 * An example CPC table looks like the following. 627 * 628 * Name(_CPC, Package() 629 * { 630 * 17, 631 * NumEntries 632 * 1, 633 * // Revision 634 * ResourceTemplate(){Register(PCC, 32, 0, 0x120, 2)}, 635 * // Highest Performance 636 * ResourceTemplate(){Register(PCC, 32, 0, 0x124, 2)}, 637 * // Nominal Performance 638 * ResourceTemplate(){Register(PCC, 32, 0, 0x128, 2)}, 639 * // Lowest Nonlinear Performance 640 * ResourceTemplate(){Register(PCC, 32, 0, 0x12C, 2)}, 641 * // Lowest Performance 642 * ResourceTemplate(){Register(PCC, 32, 0, 0x130, 2)}, 643 * // Guaranteed Performance Register 644 * ResourceTemplate(){Register(PCC, 32, 0, 0x110, 2)}, 645 * // Desired Performance Register 646 * ResourceTemplate(){Register(SystemMemory, 0, 0, 0, 0)}, 647 * .. 648 * .. 649 * .. 650 * 651 * } 652 * Each Register() encodes how to access that specific register. 653 * e.g. a sample PCC entry has the following encoding: 654 * 655 * Register ( 656 * PCC, 657 * AddressSpaceKeyword 658 * 8, 659 * //RegisterBitWidth 660 * 8, 661 * //RegisterBitOffset 662 * 0x30, 663 * //RegisterAddress 664 * 9 665 * //AccessSize (subspace ID) 666 * 0 667 * ) 668 * } 669 */ 670 671 #ifndef init_freq_invariance_cppc 672 static inline void init_freq_invariance_cppc(void) { } 673 #endif 674 675 /** 676 * acpi_cppc_processor_probe - Search for per CPU _CPC objects. 677 * @pr: Ptr to acpi_processor containing this CPU's logical ID. 678 * 679 * Return: 0 for success or negative value for err. 680 */ 681 int acpi_cppc_processor_probe(struct acpi_processor *pr) 682 { 683 struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; 684 union acpi_object *out_obj, *cpc_obj; 685 struct cpc_desc *cpc_ptr; 686 struct cpc_reg *gas_t; 687 struct device *cpu_dev; 688 acpi_handle handle = pr->handle; 689 unsigned int num_ent, i, cpc_rev; 690 int pcc_subspace_id = -1; 691 acpi_status status; 692 int ret = -EFAULT; 693 694 /* Parse the ACPI _CPC table for this CPU. */ 695 status = acpi_evaluate_object_typed(handle, "_CPC", NULL, &output, 696 ACPI_TYPE_PACKAGE); 697 if (ACPI_FAILURE(status)) { 698 ret = -ENODEV; 699 goto out_buf_free; 700 } 701 702 out_obj = (union acpi_object *) output.pointer; 703 704 cpc_ptr = kzalloc(sizeof(struct cpc_desc), GFP_KERNEL); 705 if (!cpc_ptr) { 706 ret = -ENOMEM; 707 goto out_buf_free; 708 } 709 710 /* First entry is NumEntries. */ 711 cpc_obj = &out_obj->package.elements[0]; 712 if (cpc_obj->type == ACPI_TYPE_INTEGER) { 713 num_ent = cpc_obj->integer.value; 714 } else { 715 pr_debug("Unexpected entry type(%d) for NumEntries\n", 716 cpc_obj->type); 717 goto out_free; 718 } 719 cpc_ptr->num_entries = num_ent; 720 721 /* Second entry should be revision. */ 722 cpc_obj = &out_obj->package.elements[1]; 723 if (cpc_obj->type == ACPI_TYPE_INTEGER) { 724 cpc_rev = cpc_obj->integer.value; 725 } else { 726 pr_debug("Unexpected entry type(%d) for Revision\n", 727 cpc_obj->type); 728 goto out_free; 729 } 730 cpc_ptr->version = cpc_rev; 731 732 if (!is_cppc_supported(cpc_rev, num_ent)) 733 goto out_free; 734 735 /* Iterate through remaining entries in _CPC */ 736 for (i = 2; i < num_ent; i++) { 737 cpc_obj = &out_obj->package.elements[i]; 738 739 if (cpc_obj->type == ACPI_TYPE_INTEGER) { 740 cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_INTEGER; 741 cpc_ptr->cpc_regs[i-2].cpc_entry.int_value = cpc_obj->integer.value; 742 } else if (cpc_obj->type == ACPI_TYPE_BUFFER) { 743 gas_t = (struct cpc_reg *) 744 cpc_obj->buffer.pointer; 745 746 /* 747 * The PCC Subspace index is encoded inside 748 * the CPC table entries. The same PCC index 749 * will be used for all the PCC entries, 750 * so extract it only once. 751 */ 752 if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { 753 if (pcc_subspace_id < 0) { 754 pcc_subspace_id = gas_t->access_width; 755 if (pcc_data_alloc(pcc_subspace_id)) 756 goto out_free; 757 } else if (pcc_subspace_id != gas_t->access_width) { 758 pr_debug("Mismatched PCC ids.\n"); 759 goto out_free; 760 } 761 } else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { 762 if (gas_t->address) { 763 void __iomem *addr; 764 765 addr = ioremap(gas_t->address, gas_t->bit_width/8); 766 if (!addr) 767 goto out_free; 768 cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr; 769 } 770 } else { 771 if (gas_t->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE || !cpc_ffh_supported()) { 772 /* Support only PCC ,SYS MEM and FFH type regs */ 773 pr_debug("Unsupported register type: %d\n", gas_t->space_id); 774 goto out_free; 775 } 776 } 777 778 cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_BUFFER; 779 memcpy(&cpc_ptr->cpc_regs[i-2].cpc_entry.reg, gas_t, sizeof(*gas_t)); 780 } else { 781 pr_debug("Err in entry:%d in CPC table of CPU:%d \n", i, pr->id); 782 goto out_free; 783 } 784 } 785 per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id; 786 787 /* 788 * Initialize the remaining cpc_regs as unsupported. 789 * Example: In case FW exposes CPPC v2, the below loop will initialize 790 * LOWEST_FREQ and NOMINAL_FREQ regs as unsupported 791 */ 792 for (i = num_ent - 2; i < MAX_CPC_REG_ENT; i++) { 793 cpc_ptr->cpc_regs[i].type = ACPI_TYPE_INTEGER; 794 cpc_ptr->cpc_regs[i].cpc_entry.int_value = 0; 795 } 796 797 798 /* Store CPU Logical ID */ 799 cpc_ptr->cpu_id = pr->id; 800 801 /* Parse PSD data for this CPU */ 802 ret = acpi_get_psd(cpc_ptr, handle); 803 if (ret) 804 goto out_free; 805 806 /* Register PCC channel once for all PCC subspace ID. */ 807 if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) { 808 ret = register_pcc_channel(pcc_subspace_id); 809 if (ret) 810 goto out_free; 811 812 init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock); 813 init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q); 814 } 815 816 /* Everything looks okay */ 817 pr_debug("Parsed CPC struct for CPU: %d\n", pr->id); 818 819 /* Add per logical CPU nodes for reading its feedback counters. */ 820 cpu_dev = get_cpu_device(pr->id); 821 if (!cpu_dev) { 822 ret = -EINVAL; 823 goto out_free; 824 } 825 826 /* Plug PSD data into this CPU's CPC descriptor. */ 827 per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr; 828 829 ret = kobject_init_and_add(&cpc_ptr->kobj, &cppc_ktype, &cpu_dev->kobj, 830 "acpi_cppc"); 831 if (ret) { 832 per_cpu(cpc_desc_ptr, pr->id) = NULL; 833 kobject_put(&cpc_ptr->kobj); 834 goto out_free; 835 } 836 837 init_freq_invariance_cppc(); 838 839 kfree(output.pointer); 840 return 0; 841 842 out_free: 843 /* Free all the mapped sys mem areas for this CPU */ 844 for (i = 2; i < cpc_ptr->num_entries; i++) { 845 void __iomem *addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr; 846 847 if (addr) 848 iounmap(addr); 849 } 850 kfree(cpc_ptr); 851 852 out_buf_free: 853 kfree(output.pointer); 854 return ret; 855 } 856 EXPORT_SYMBOL_GPL(acpi_cppc_processor_probe); 857 858 /** 859 * acpi_cppc_processor_exit - Cleanup CPC structs. 860 * @pr: Ptr to acpi_processor containing this CPU's logical ID. 861 * 862 * Return: Void 863 */ 864 void acpi_cppc_processor_exit(struct acpi_processor *pr) 865 { 866 struct cpc_desc *cpc_ptr; 867 unsigned int i; 868 void __iomem *addr; 869 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id); 870 871 if (pcc_ss_id >=0 && pcc_data[pcc_ss_id]) { 872 if (pcc_data[pcc_ss_id]->pcc_channel_acquired) { 873 pcc_data[pcc_ss_id]->refcount--; 874 if (!pcc_data[pcc_ss_id]->refcount) { 875 pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel); 876 kfree(pcc_data[pcc_ss_id]); 877 pcc_data[pcc_ss_id] = NULL; 878 } 879 } 880 } 881 882 cpc_ptr = per_cpu(cpc_desc_ptr, pr->id); 883 if (!cpc_ptr) 884 return; 885 886 /* Free all the mapped sys mem areas for this CPU */ 887 for (i = 2; i < cpc_ptr->num_entries; i++) { 888 addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr; 889 if (addr) 890 iounmap(addr); 891 } 892 893 kobject_put(&cpc_ptr->kobj); 894 kfree(cpc_ptr); 895 } 896 EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit); 897 898 /** 899 * cpc_read_ffh() - Read FFH register 900 * @cpunum: CPU number to read 901 * @reg: cppc register information 902 * @val: place holder for return value 903 * 904 * Read bit_width bits from a specified address and bit_offset 905 * 906 * Return: 0 for success and error code 907 */ 908 int __weak cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val) 909 { 910 return -ENOTSUPP; 911 } 912 913 /** 914 * cpc_write_ffh() - Write FFH register 915 * @cpunum: CPU number to write 916 * @reg: cppc register information 917 * @val: value to write 918 * 919 * Write value of bit_width bits to a specified address and bit_offset 920 * 921 * Return: 0 for success and error code 922 */ 923 int __weak cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val) 924 { 925 return -ENOTSUPP; 926 } 927 928 /* 929 * Since cpc_read and cpc_write are called while holding pcc_lock, it should be 930 * as fast as possible. We have already mapped the PCC subspace during init, so 931 * we can directly write to it. 932 */ 933 934 static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val) 935 { 936 int ret_val = 0; 937 void __iomem *vaddr = NULL; 938 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); 939 struct cpc_reg *reg = ®_res->cpc_entry.reg; 940 941 if (reg_res->type == ACPI_TYPE_INTEGER) { 942 *val = reg_res->cpc_entry.int_value; 943 return ret_val; 944 } 945 946 *val = 0; 947 if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) 948 vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id); 949 else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) 950 vaddr = reg_res->sys_mem_vaddr; 951 else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) 952 return cpc_read_ffh(cpu, reg, val); 953 else 954 return acpi_os_read_memory((acpi_physical_address)reg->address, 955 val, reg->bit_width); 956 957 switch (reg->bit_width) { 958 case 8: 959 *val = readb_relaxed(vaddr); 960 break; 961 case 16: 962 *val = readw_relaxed(vaddr); 963 break; 964 case 32: 965 *val = readl_relaxed(vaddr); 966 break; 967 case 64: 968 *val = readq_relaxed(vaddr); 969 break; 970 default: 971 pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n", 972 reg->bit_width, pcc_ss_id); 973 ret_val = -EFAULT; 974 } 975 976 return ret_val; 977 } 978 979 static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val) 980 { 981 int ret_val = 0; 982 void __iomem *vaddr = NULL; 983 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); 984 struct cpc_reg *reg = ®_res->cpc_entry.reg; 985 986 if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) 987 vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id); 988 else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) 989 vaddr = reg_res->sys_mem_vaddr; 990 else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) 991 return cpc_write_ffh(cpu, reg, val); 992 else 993 return acpi_os_write_memory((acpi_physical_address)reg->address, 994 val, reg->bit_width); 995 996 switch (reg->bit_width) { 997 case 8: 998 writeb_relaxed(val, vaddr); 999 break; 1000 case 16: 1001 writew_relaxed(val, vaddr); 1002 break; 1003 case 32: 1004 writel_relaxed(val, vaddr); 1005 break; 1006 case 64: 1007 writeq_relaxed(val, vaddr); 1008 break; 1009 default: 1010 pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n", 1011 reg->bit_width, pcc_ss_id); 1012 ret_val = -EFAULT; 1013 break; 1014 } 1015 1016 return ret_val; 1017 } 1018 1019 /** 1020 * cppc_get_desired_perf - Get the value of desired performance register. 1021 * @cpunum: CPU from which to get desired performance. 1022 * @desired_perf: address of a variable to store the returned desired performance 1023 * 1024 * Return: 0 for success, -EIO otherwise. 1025 */ 1026 int cppc_get_desired_perf(int cpunum, u64 *desired_perf) 1027 { 1028 struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum); 1029 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum); 1030 struct cpc_register_resource *desired_reg; 1031 struct cppc_pcc_data *pcc_ss_data = NULL; 1032 1033 desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF]; 1034 1035 if (CPC_IN_PCC(desired_reg)) { 1036 int ret = 0; 1037 1038 if (pcc_ss_id < 0) 1039 return -EIO; 1040 1041 pcc_ss_data = pcc_data[pcc_ss_id]; 1042 1043 down_write(&pcc_ss_data->pcc_lock); 1044 1045 if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0) 1046 cpc_read(cpunum, desired_reg, desired_perf); 1047 else 1048 ret = -EIO; 1049 1050 up_write(&pcc_ss_data->pcc_lock); 1051 1052 return ret; 1053 } 1054 1055 cpc_read(cpunum, desired_reg, desired_perf); 1056 1057 return 0; 1058 } 1059 EXPORT_SYMBOL_GPL(cppc_get_desired_perf); 1060 1061 /** 1062 * cppc_get_perf_caps - Get a CPU's performance capabilities. 1063 * @cpunum: CPU from which to get capabilities info. 1064 * @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h 1065 * 1066 * Return: 0 for success with perf_caps populated else -ERRNO. 1067 */ 1068 int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) 1069 { 1070 struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum); 1071 struct cpc_register_resource *highest_reg, *lowest_reg, 1072 *lowest_non_linear_reg, *nominal_reg, *guaranteed_reg, 1073 *low_freq_reg = NULL, *nom_freq_reg = NULL; 1074 u64 high, low, guaranteed, nom, min_nonlinear, low_f = 0, nom_f = 0; 1075 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum); 1076 struct cppc_pcc_data *pcc_ss_data = NULL; 1077 int ret = 0, regs_in_pcc = 0; 1078 1079 if (!cpc_desc) { 1080 pr_debug("No CPC descriptor for CPU:%d\n", cpunum); 1081 return -ENODEV; 1082 } 1083 1084 highest_reg = &cpc_desc->cpc_regs[HIGHEST_PERF]; 1085 lowest_reg = &cpc_desc->cpc_regs[LOWEST_PERF]; 1086 lowest_non_linear_reg = &cpc_desc->cpc_regs[LOW_NON_LINEAR_PERF]; 1087 nominal_reg = &cpc_desc->cpc_regs[NOMINAL_PERF]; 1088 low_freq_reg = &cpc_desc->cpc_regs[LOWEST_FREQ]; 1089 nom_freq_reg = &cpc_desc->cpc_regs[NOMINAL_FREQ]; 1090 guaranteed_reg = &cpc_desc->cpc_regs[GUARANTEED_PERF]; 1091 1092 /* Are any of the regs PCC ?*/ 1093 if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) || 1094 CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg) || 1095 CPC_IN_PCC(low_freq_reg) || CPC_IN_PCC(nom_freq_reg)) { 1096 if (pcc_ss_id < 0) { 1097 pr_debug("Invalid pcc_ss_id\n"); 1098 return -ENODEV; 1099 } 1100 pcc_ss_data = pcc_data[pcc_ss_id]; 1101 regs_in_pcc = 1; 1102 down_write(&pcc_ss_data->pcc_lock); 1103 /* Ring doorbell once to update PCC subspace */ 1104 if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) { 1105 ret = -EIO; 1106 goto out_err; 1107 } 1108 } 1109 1110 cpc_read(cpunum, highest_reg, &high); 1111 perf_caps->highest_perf = high; 1112 1113 cpc_read(cpunum, lowest_reg, &low); 1114 perf_caps->lowest_perf = low; 1115 1116 cpc_read(cpunum, nominal_reg, &nom); 1117 perf_caps->nominal_perf = nom; 1118 1119 if (guaranteed_reg->type != ACPI_TYPE_BUFFER || 1120 IS_NULL_REG(&guaranteed_reg->cpc_entry.reg)) { 1121 perf_caps->guaranteed_perf = 0; 1122 } else { 1123 cpc_read(cpunum, guaranteed_reg, &guaranteed); 1124 perf_caps->guaranteed_perf = guaranteed; 1125 } 1126 1127 cpc_read(cpunum, lowest_non_linear_reg, &min_nonlinear); 1128 perf_caps->lowest_nonlinear_perf = min_nonlinear; 1129 1130 if (!high || !low || !nom || !min_nonlinear) 1131 ret = -EFAULT; 1132 1133 /* Read optional lowest and nominal frequencies if present */ 1134 if (CPC_SUPPORTED(low_freq_reg)) 1135 cpc_read(cpunum, low_freq_reg, &low_f); 1136 1137 if (CPC_SUPPORTED(nom_freq_reg)) 1138 cpc_read(cpunum, nom_freq_reg, &nom_f); 1139 1140 perf_caps->lowest_freq = low_f; 1141 perf_caps->nominal_freq = nom_f; 1142 1143 1144 out_err: 1145 if (regs_in_pcc) 1146 up_write(&pcc_ss_data->pcc_lock); 1147 return ret; 1148 } 1149 EXPORT_SYMBOL_GPL(cppc_get_perf_caps); 1150 1151 /** 1152 * cppc_get_perf_ctrs - Read a CPU's performance feedback counters. 1153 * @cpunum: CPU from which to read counters. 1154 * @perf_fb_ctrs: ptr to cppc_perf_fb_ctrs. See cppc_acpi.h 1155 * 1156 * Return: 0 for success with perf_fb_ctrs populated else -ERRNO. 1157 */ 1158 int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) 1159 { 1160 struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum); 1161 struct cpc_register_resource *delivered_reg, *reference_reg, 1162 *ref_perf_reg, *ctr_wrap_reg; 1163 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum); 1164 struct cppc_pcc_data *pcc_ss_data = NULL; 1165 u64 delivered, reference, ref_perf, ctr_wrap_time; 1166 int ret = 0, regs_in_pcc = 0; 1167 1168 if (!cpc_desc) { 1169 pr_debug("No CPC descriptor for CPU:%d\n", cpunum); 1170 return -ENODEV; 1171 } 1172 1173 delivered_reg = &cpc_desc->cpc_regs[DELIVERED_CTR]; 1174 reference_reg = &cpc_desc->cpc_regs[REFERENCE_CTR]; 1175 ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF]; 1176 ctr_wrap_reg = &cpc_desc->cpc_regs[CTR_WRAP_TIME]; 1177 1178 /* 1179 * If reference perf register is not supported then we should 1180 * use the nominal perf value 1181 */ 1182 if (!CPC_SUPPORTED(ref_perf_reg)) 1183 ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF]; 1184 1185 /* Are any of the regs PCC ?*/ 1186 if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) || 1187 CPC_IN_PCC(ctr_wrap_reg) || CPC_IN_PCC(ref_perf_reg)) { 1188 if (pcc_ss_id < 0) { 1189 pr_debug("Invalid pcc_ss_id\n"); 1190 return -ENODEV; 1191 } 1192 pcc_ss_data = pcc_data[pcc_ss_id]; 1193 down_write(&pcc_ss_data->pcc_lock); 1194 regs_in_pcc = 1; 1195 /* Ring doorbell once to update PCC subspace */ 1196 if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) { 1197 ret = -EIO; 1198 goto out_err; 1199 } 1200 } 1201 1202 cpc_read(cpunum, delivered_reg, &delivered); 1203 cpc_read(cpunum, reference_reg, &reference); 1204 cpc_read(cpunum, ref_perf_reg, &ref_perf); 1205 1206 /* 1207 * Per spec, if ctr_wrap_time optional register is unsupported, then the 1208 * performance counters are assumed to never wrap during the lifetime of 1209 * platform 1210 */ 1211 ctr_wrap_time = (u64)(~((u64)0)); 1212 if (CPC_SUPPORTED(ctr_wrap_reg)) 1213 cpc_read(cpunum, ctr_wrap_reg, &ctr_wrap_time); 1214 1215 if (!delivered || !reference || !ref_perf) { 1216 ret = -EFAULT; 1217 goto out_err; 1218 } 1219 1220 perf_fb_ctrs->delivered = delivered; 1221 perf_fb_ctrs->reference = reference; 1222 perf_fb_ctrs->reference_perf = ref_perf; 1223 perf_fb_ctrs->wraparound_time = ctr_wrap_time; 1224 out_err: 1225 if (regs_in_pcc) 1226 up_write(&pcc_ss_data->pcc_lock); 1227 return ret; 1228 } 1229 EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs); 1230 1231 /** 1232 * cppc_set_perf - Set a CPU's performance controls. 1233 * @cpu: CPU for which to set performance controls. 1234 * @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h 1235 * 1236 * Return: 0 for success, -ERRNO otherwise. 1237 */ 1238 int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) 1239 { 1240 struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu); 1241 struct cpc_register_resource *desired_reg; 1242 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); 1243 struct cppc_pcc_data *pcc_ss_data = NULL; 1244 int ret = 0; 1245 1246 if (!cpc_desc) { 1247 pr_debug("No CPC descriptor for CPU:%d\n", cpu); 1248 return -ENODEV; 1249 } 1250 1251 desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF]; 1252 1253 /* 1254 * This is Phase-I where we want to write to CPC registers 1255 * -> We want all CPUs to be able to execute this phase in parallel 1256 * 1257 * Since read_lock can be acquired by multiple CPUs simultaneously we 1258 * achieve that goal here 1259 */ 1260 if (CPC_IN_PCC(desired_reg)) { 1261 if (pcc_ss_id < 0) { 1262 pr_debug("Invalid pcc_ss_id\n"); 1263 return -ENODEV; 1264 } 1265 pcc_ss_data = pcc_data[pcc_ss_id]; 1266 down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */ 1267 if (pcc_ss_data->platform_owns_pcc) { 1268 ret = check_pcc_chan(pcc_ss_id, false); 1269 if (ret) { 1270 up_read(&pcc_ss_data->pcc_lock); 1271 return ret; 1272 } 1273 } 1274 /* 1275 * Update the pending_write to make sure a PCC CMD_READ will not 1276 * arrive and steal the channel during the switch to write lock 1277 */ 1278 pcc_ss_data->pending_pcc_write_cmd = true; 1279 cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt; 1280 cpc_desc->write_cmd_status = 0; 1281 } 1282 1283 /* 1284 * Skip writing MIN/MAX until Linux knows how to come up with 1285 * useful values. 1286 */ 1287 cpc_write(cpu, desired_reg, perf_ctrls->desired_perf); 1288 1289 if (CPC_IN_PCC(desired_reg)) 1290 up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */ 1291 /* 1292 * This is Phase-II where we transfer the ownership of PCC to Platform 1293 * 1294 * Short Summary: Basically if we think of a group of cppc_set_perf 1295 * requests that happened in short overlapping interval. The last CPU to 1296 * come out of Phase-I will enter Phase-II and ring the doorbell. 1297 * 1298 * We have the following requirements for Phase-II: 1299 * 1. We want to execute Phase-II only when there are no CPUs 1300 * currently executing in Phase-I 1301 * 2. Once we start Phase-II we want to avoid all other CPUs from 1302 * entering Phase-I. 1303 * 3. We want only one CPU among all those who went through Phase-I 1304 * to run phase-II 1305 * 1306 * If write_trylock fails to get the lock and doesn't transfer the 1307 * PCC ownership to the platform, then one of the following will be TRUE 1308 * 1. There is at-least one CPU in Phase-I which will later execute 1309 * write_trylock, so the CPUs in Phase-I will be responsible for 1310 * executing the Phase-II. 1311 * 2. Some other CPU has beaten this CPU to successfully execute the 1312 * write_trylock and has already acquired the write_lock. We know for a 1313 * fact it (other CPU acquiring the write_lock) couldn't have happened 1314 * before this CPU's Phase-I as we held the read_lock. 1315 * 3. Some other CPU executing pcc CMD_READ has stolen the 1316 * down_write, in which case, send_pcc_cmd will check for pending 1317 * CMD_WRITE commands by checking the pending_pcc_write_cmd. 1318 * So this CPU can be certain that its request will be delivered 1319 * So in all cases, this CPU knows that its request will be delivered 1320 * by another CPU and can return 1321 * 1322 * After getting the down_write we still need to check for 1323 * pending_pcc_write_cmd to take care of the following scenario 1324 * The thread running this code could be scheduled out between 1325 * Phase-I and Phase-II. Before it is scheduled back on, another CPU 1326 * could have delivered the request to Platform by triggering the 1327 * doorbell and transferred the ownership of PCC to platform. So this 1328 * avoids triggering an unnecessary doorbell and more importantly before 1329 * triggering the doorbell it makes sure that the PCC channel ownership 1330 * is still with OSPM. 1331 * pending_pcc_write_cmd can also be cleared by a different CPU, if 1332 * there was a pcc CMD_READ waiting on down_write and it steals the lock 1333 * before the pcc CMD_WRITE is completed. pcc_send_cmd checks for this 1334 * case during a CMD_READ and if there are pending writes it delivers 1335 * the write command before servicing the read command 1336 */ 1337 if (CPC_IN_PCC(desired_reg)) { 1338 if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */ 1339 /* Update only if there are pending write commands */ 1340 if (pcc_ss_data->pending_pcc_write_cmd) 1341 send_pcc_cmd(pcc_ss_id, CMD_WRITE); 1342 up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */ 1343 } else 1344 /* Wait until pcc_write_cnt is updated by send_pcc_cmd */ 1345 wait_event(pcc_ss_data->pcc_write_wait_q, 1346 cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt); 1347 1348 /* send_pcc_cmd updates the status in case of failure */ 1349 ret = cpc_desc->write_cmd_status; 1350 } 1351 return ret; 1352 } 1353 EXPORT_SYMBOL_GPL(cppc_set_perf); 1354 1355 /** 1356 * cppc_get_transition_latency - returns frequency transition latency in ns 1357 * 1358 * ACPI CPPC does not explicitly specifiy how a platform can specify the 1359 * transition latency for perfromance change requests. The closest we have 1360 * is the timing information from the PCCT tables which provides the info 1361 * on the number and frequency of PCC commands the platform can handle. 1362 */ 1363 unsigned int cppc_get_transition_latency(int cpu_num) 1364 { 1365 /* 1366 * Expected transition latency is based on the PCCT timing values 1367 * Below are definition from ACPI spec: 1368 * pcc_nominal- Expected latency to process a command, in microseconds 1369 * pcc_mpar - The maximum number of periodic requests that the subspace 1370 * channel can support, reported in commands per minute. 0 1371 * indicates no limitation. 1372 * pcc_mrtt - The minimum amount of time that OSPM must wait after the 1373 * completion of a command before issuing the next command, 1374 * in microseconds. 1375 */ 1376 unsigned int latency_ns = 0; 1377 struct cpc_desc *cpc_desc; 1378 struct cpc_register_resource *desired_reg; 1379 int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num); 1380 struct cppc_pcc_data *pcc_ss_data; 1381 1382 cpc_desc = per_cpu(cpc_desc_ptr, cpu_num); 1383 if (!cpc_desc) 1384 return CPUFREQ_ETERNAL; 1385 1386 desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF]; 1387 if (!CPC_IN_PCC(desired_reg)) 1388 return CPUFREQ_ETERNAL; 1389 1390 if (pcc_ss_id < 0) 1391 return CPUFREQ_ETERNAL; 1392 1393 pcc_ss_data = pcc_data[pcc_ss_id]; 1394 if (pcc_ss_data->pcc_mpar) 1395 latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar); 1396 1397 latency_ns = max(latency_ns, pcc_ss_data->pcc_nominal * 1000); 1398 latency_ns = max(latency_ns, pcc_ss_data->pcc_mrtt * 1000); 1399 1400 return latency_ns; 1401 } 1402 EXPORT_SYMBOL_GPL(cppc_get_transition_latency); 1403