xref: /openbmc/linux/drivers/acpi/acpica/utxface.c (revision 5bd8e16d)
1 /******************************************************************************
2  *
3  * Module Name: utxface - External interfaces, miscellaneous utility functions
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2013, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #include <linux/export.h>
45 #include <acpi/acpi.h>
46 #include "accommon.h"
47 #include "acdebug.h"
48 
49 #define _COMPONENT          ACPI_UTILITIES
50 ACPI_MODULE_NAME("utxface")
51 
52 /*******************************************************************************
53  *
54  * FUNCTION:    acpi_terminate
55  *
56  * PARAMETERS:  None
57  *
58  * RETURN:      Status
59  *
60  * DESCRIPTION: Shutdown the ACPICA subsystem and release all resources.
61  *
62  ******************************************************************************/
63 acpi_status acpi_terminate(void)
64 {
65 	acpi_status status;
66 
67 	ACPI_FUNCTION_TRACE(acpi_terminate);
68 
69 	/* Just exit if subsystem is already shutdown */
70 
71 	if (acpi_gbl_shutdown) {
72 		ACPI_ERROR((AE_INFO, "ACPI Subsystem is already terminated"));
73 		return_ACPI_STATUS(AE_OK);
74 	}
75 
76 	/* Subsystem appears active, go ahead and shut it down */
77 
78 	acpi_gbl_shutdown = TRUE;
79 	acpi_gbl_startup_flags = 0;
80 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n"));
81 
82 	/* Terminate the AML Debugger if present */
83 
84 	ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
85 
86 	/* Shutdown and free all resources */
87 
88 	acpi_ut_subsystem_shutdown();
89 
90 	/* Free the mutex objects */
91 
92 	acpi_ut_mutex_terminate();
93 
94 #ifdef ACPI_DEBUGGER
95 
96 	/* Shut down the debugger */
97 
98 	acpi_db_terminate();
99 #endif
100 
101 	/* Now we can shutdown the OS-dependent layer */
102 
103 	status = acpi_os_terminate();
104 	return_ACPI_STATUS(status);
105 }
106 
107 ACPI_EXPORT_SYMBOL(acpi_terminate)
108 
109 #ifndef ACPI_ASL_COMPILER
110 #ifdef ACPI_FUTURE_USAGE
111 /*******************************************************************************
112  *
113  * FUNCTION:    acpi_subsystem_status
114  *
115  * PARAMETERS:  None
116  *
117  * RETURN:      Status of the ACPI subsystem
118  *
119  * DESCRIPTION: Other drivers that use the ACPI subsystem should call this
120  *              before making any other calls, to ensure the subsystem
121  *              initialized successfully.
122  *
123  ******************************************************************************/
124 acpi_status acpi_subsystem_status(void)
125 {
126 
127 	if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
128 		return (AE_OK);
129 	} else {
130 		return (AE_ERROR);
131 	}
132 }
133 
134 ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
135 
136 /*******************************************************************************
137  *
138  * FUNCTION:    acpi_get_system_info
139  *
140  * PARAMETERS:  out_buffer      - A buffer to receive the resources for the
141  *                                device
142  *
143  * RETURN:      status          - the status of the call
144  *
145  * DESCRIPTION: This function is called to get information about the current
146  *              state of the ACPI subsystem. It will return system information
147  *              in the out_buffer.
148  *
149  *              If the function fails an appropriate status will be returned
150  *              and the value of out_buffer is undefined.
151  *
152  ******************************************************************************/
153 acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer)
154 {
155 	struct acpi_system_info *info_ptr;
156 	acpi_status status;
157 
158 	ACPI_FUNCTION_TRACE(acpi_get_system_info);
159 
160 	/* Parameter validation */
161 
162 	status = acpi_ut_validate_buffer(out_buffer);
163 	if (ACPI_FAILURE(status)) {
164 		return_ACPI_STATUS(status);
165 	}
166 
167 	/* Validate/Allocate/Clear caller buffer */
168 
169 	status =
170 	    acpi_ut_initialize_buffer(out_buffer,
171 				      sizeof(struct acpi_system_info));
172 	if (ACPI_FAILURE(status)) {
173 		return_ACPI_STATUS(status);
174 	}
175 
176 	/*
177 	 * Populate the return buffer
178 	 */
179 	info_ptr = (struct acpi_system_info *)out_buffer->pointer;
180 
181 	info_ptr->acpi_ca_version = ACPI_CA_VERSION;
182 
183 	/* System flags (ACPI capabilities) */
184 
185 	info_ptr->flags = ACPI_SYS_MODE_ACPI;
186 
187 	/* Timer resolution - 24 or 32 bits  */
188 
189 	if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
190 		info_ptr->timer_resolution = 24;
191 	} else {
192 		info_ptr->timer_resolution = 32;
193 	}
194 
195 	/* Clear the reserved fields */
196 
197 	info_ptr->reserved1 = 0;
198 	info_ptr->reserved2 = 0;
199 
200 	/* Current debug levels */
201 
202 	info_ptr->debug_layer = acpi_dbg_layer;
203 	info_ptr->debug_level = acpi_dbg_level;
204 
205 	return_ACPI_STATUS(AE_OK);
206 }
207 
208 ACPI_EXPORT_SYMBOL(acpi_get_system_info)
209 
210 /*****************************************************************************
211  *
212  * FUNCTION:    acpi_install_initialization_handler
213  *
214  * PARAMETERS:  handler             - Callback procedure
215  *              function            - Not (currently) used, see below
216  *
217  * RETURN:      Status
218  *
219  * DESCRIPTION: Install an initialization handler
220  *
221  * TBD: When a second function is added, must save the Function also.
222  *
223  ****************************************************************************/
224 acpi_status
225 acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
226 {
227 
228 	if (!handler) {
229 		return (AE_BAD_PARAMETER);
230 	}
231 
232 	if (acpi_gbl_init_handler) {
233 		return (AE_ALREADY_EXISTS);
234 	}
235 
236 	acpi_gbl_init_handler = handler;
237 	return (AE_OK);
238 }
239 
240 ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
241 #endif				/*  ACPI_FUTURE_USAGE  */
242 
243 /*****************************************************************************
244  *
245  * FUNCTION:    acpi_purge_cached_objects
246  *
247  * PARAMETERS:  None
248  *
249  * RETURN:      Status
250  *
251  * DESCRIPTION: Empty all caches (delete the cached objects)
252  *
253  ****************************************************************************/
254 acpi_status acpi_purge_cached_objects(void)
255 {
256 	ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
257 
258 	(void)acpi_os_purge_cache(acpi_gbl_state_cache);
259 	(void)acpi_os_purge_cache(acpi_gbl_operand_cache);
260 	(void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
261 	(void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
262 
263 	return_ACPI_STATUS(AE_OK);
264 }
265 
266 ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)
267 
268 /*****************************************************************************
269  *
270  * FUNCTION:    acpi_install_interface
271  *
272  * PARAMETERS:  interface_name      - The interface to install
273  *
274  * RETURN:      Status
275  *
276  * DESCRIPTION: Install an _OSI interface to the global list
277  *
278  ****************************************************************************/
279 acpi_status acpi_install_interface(acpi_string interface_name)
280 {
281 	acpi_status status;
282 	struct acpi_interface_info *interface_info;
283 
284 	/* Parameter validation */
285 
286 	if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) {
287 		return (AE_BAD_PARAMETER);
288 	}
289 
290 	status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
291 	if (ACPI_FAILURE(status)) {
292 		return (status);
293 	}
294 
295 	/* Check if the interface name is already in the global list */
296 
297 	interface_info = acpi_ut_get_interface(interface_name);
298 	if (interface_info) {
299 		/*
300 		 * The interface already exists in the list. This is OK if the
301 		 * interface has been marked invalid -- just clear the bit.
302 		 */
303 		if (interface_info->flags & ACPI_OSI_INVALID) {
304 			interface_info->flags &= ~ACPI_OSI_INVALID;
305 			status = AE_OK;
306 		} else {
307 			status = AE_ALREADY_EXISTS;
308 		}
309 	} else {
310 		/* New interface name, install into the global list */
311 
312 		status = acpi_ut_install_interface(interface_name);
313 	}
314 
315 	acpi_os_release_mutex(acpi_gbl_osi_mutex);
316 	return (status);
317 }
318 
319 ACPI_EXPORT_SYMBOL(acpi_install_interface)
320 
321 /*****************************************************************************
322  *
323  * FUNCTION:    acpi_remove_interface
324  *
325  * PARAMETERS:  interface_name      - The interface to remove
326  *
327  * RETURN:      Status
328  *
329  * DESCRIPTION: Remove an _OSI interface from the global list
330  *
331  ****************************************************************************/
332 acpi_status acpi_remove_interface(acpi_string interface_name)
333 {
334 	acpi_status status;
335 
336 	/* Parameter validation */
337 
338 	if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) {
339 		return (AE_BAD_PARAMETER);
340 	}
341 
342 	status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
343 	if (ACPI_FAILURE(status)) {
344 		return (status);
345 	}
346 
347 	status = acpi_ut_remove_interface(interface_name);
348 
349 	acpi_os_release_mutex(acpi_gbl_osi_mutex);
350 	return (status);
351 }
352 
353 ACPI_EXPORT_SYMBOL(acpi_remove_interface)
354 
355 /*****************************************************************************
356  *
357  * FUNCTION:    acpi_install_interface_handler
358  *
359  * PARAMETERS:  handler             - The _OSI interface handler to install
360  *                                    NULL means "remove existing handler"
361  *
362  * RETURN:      Status
363  *
364  * DESCRIPTION: Install a handler for the predefined _OSI ACPI method.
365  *              invoked during execution of the internal implementation of
366  *              _OSI. A NULL handler simply removes any existing handler.
367  *
368  ****************************************************************************/
369 acpi_status acpi_install_interface_handler(acpi_interface_handler handler)
370 {
371 	acpi_status status;
372 
373 	status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
374 	if (ACPI_FAILURE(status)) {
375 		return (status);
376 	}
377 
378 	if (handler && acpi_gbl_interface_handler) {
379 		status = AE_ALREADY_EXISTS;
380 	} else {
381 		acpi_gbl_interface_handler = handler;
382 	}
383 
384 	acpi_os_release_mutex(acpi_gbl_osi_mutex);
385 	return (status);
386 }
387 
388 ACPI_EXPORT_SYMBOL(acpi_install_interface_handler)
389 
390 /*****************************************************************************
391  *
392  * FUNCTION:    acpi_update_interfaces
393  *
394  * PARAMETERS:  action              - Actions to be performed during the
395  *                                    update
396  *
397  * RETURN:      Status
398  *
399  * DESCRIPTION: Update _OSI interface strings, disabling or enabling OS vendor
400  *              string or/and feature group strings.
401  *
402  ****************************************************************************/
403 acpi_status acpi_update_interfaces(u8 action)
404 {
405 	acpi_status status;
406 
407 	status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
408 	if (ACPI_FAILURE(status)) {
409 		return (status);
410 	}
411 
412 	status = acpi_ut_update_interfaces(action);
413 
414 	acpi_os_release_mutex(acpi_gbl_osi_mutex);
415 	return (status);
416 }
417 
418 /*****************************************************************************
419  *
420  * FUNCTION:    acpi_check_address_range
421  *
422  * PARAMETERS:  space_id            - Address space ID
423  *              address             - Start address
424  *              length              - Length
425  *              warn                - TRUE if warning on overlap desired
426  *
427  * RETURN:      Count of the number of conflicts detected.
428  *
429  * DESCRIPTION: Check if the input address range overlaps any of the
430  *              ASL operation region address ranges.
431  *
432  ****************************************************************************/
433 
434 u32
435 acpi_check_address_range(acpi_adr_space_type space_id,
436 			 acpi_physical_address address,
437 			 acpi_size length, u8 warn)
438 {
439 	u32 overlaps;
440 	acpi_status status;
441 
442 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
443 	if (ACPI_FAILURE(status)) {
444 		return (0);
445 	}
446 
447 	overlaps = acpi_ut_check_address_range(space_id, address,
448 					       (u32)length, warn);
449 
450 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
451 	return (overlaps);
452 }
453 
454 ACPI_EXPORT_SYMBOL(acpi_check_address_range)
455 #endif				/* !ACPI_ASL_COMPILER */
456 /*******************************************************************************
457  *
458  * FUNCTION:    acpi_decode_pld_buffer
459  *
460  * PARAMETERS:  in_buffer           - Buffer returned by _PLD method
461  *              length              - Length of the in_buffer
462  *              return_buffer       - Where the decode buffer is returned
463  *
464  * RETURN:      Status and the decoded _PLD buffer. User must deallocate
465  *              the buffer via ACPI_FREE.
466  *
467  * DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into
468  *              a local struct that is much more useful to an ACPI driver.
469  *
470  ******************************************************************************/
471 acpi_status
472 acpi_decode_pld_buffer(u8 *in_buffer,
473 		       acpi_size length, struct acpi_pld_info ** return_buffer)
474 {
475 	struct acpi_pld_info *pld_info;
476 	u32 *buffer = ACPI_CAST_PTR(u32, in_buffer);
477 	u32 dword;
478 
479 	/* Parameter validation */
480 
481 	if (!in_buffer || !return_buffer || (length < 16)) {
482 		return (AE_BAD_PARAMETER);
483 	}
484 
485 	pld_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pld_info));
486 	if (!pld_info) {
487 		return (AE_NO_MEMORY);
488 	}
489 
490 	/* First 32-bit DWord */
491 
492 	ACPI_MOVE_32_TO_32(&dword, &buffer[0]);
493 	pld_info->revision = ACPI_PLD_GET_REVISION(&dword);
494 	pld_info->ignore_color = ACPI_PLD_GET_IGNORE_COLOR(&dword);
495 	pld_info->color = ACPI_PLD_GET_COLOR(&dword);
496 
497 	/* Second 32-bit DWord */
498 
499 	ACPI_MOVE_32_TO_32(&dword, &buffer[1]);
500 	pld_info->width = ACPI_PLD_GET_WIDTH(&dword);
501 	pld_info->height = ACPI_PLD_GET_HEIGHT(&dword);
502 
503 	/* Third 32-bit DWord */
504 
505 	ACPI_MOVE_32_TO_32(&dword, &buffer[2]);
506 	pld_info->user_visible = ACPI_PLD_GET_USER_VISIBLE(&dword);
507 	pld_info->dock = ACPI_PLD_GET_DOCK(&dword);
508 	pld_info->lid = ACPI_PLD_GET_LID(&dword);
509 	pld_info->panel = ACPI_PLD_GET_PANEL(&dword);
510 	pld_info->vertical_position = ACPI_PLD_GET_VERTICAL(&dword);
511 	pld_info->horizontal_position = ACPI_PLD_GET_HORIZONTAL(&dword);
512 	pld_info->shape = ACPI_PLD_GET_SHAPE(&dword);
513 	pld_info->group_orientation = ACPI_PLD_GET_ORIENTATION(&dword);
514 	pld_info->group_token = ACPI_PLD_GET_TOKEN(&dword);
515 	pld_info->group_position = ACPI_PLD_GET_POSITION(&dword);
516 	pld_info->bay = ACPI_PLD_GET_BAY(&dword);
517 
518 	/* Fourth 32-bit DWord */
519 
520 	ACPI_MOVE_32_TO_32(&dword, &buffer[3]);
521 	pld_info->ejectable = ACPI_PLD_GET_EJECTABLE(&dword);
522 	pld_info->ospm_eject_required = ACPI_PLD_GET_OSPM_EJECT(&dword);
523 	pld_info->cabinet_number = ACPI_PLD_GET_CABINET(&dword);
524 	pld_info->card_cage_number = ACPI_PLD_GET_CARD_CAGE(&dword);
525 	pld_info->reference = ACPI_PLD_GET_REFERENCE(&dword);
526 	pld_info->rotation = ACPI_PLD_GET_ROTATION(&dword);
527 	pld_info->order = ACPI_PLD_GET_ORDER(&dword);
528 
529 	if (length >= ACPI_PLD_BUFFER_SIZE) {
530 
531 		/* Fifth 32-bit DWord (Revision 2 of _PLD) */
532 
533 		ACPI_MOVE_32_TO_32(&dword, &buffer[4]);
534 		pld_info->vertical_offset = ACPI_PLD_GET_VERT_OFFSET(&dword);
535 		pld_info->horizontal_offset = ACPI_PLD_GET_HORIZ_OFFSET(&dword);
536 	}
537 
538 	*return_buffer = pld_info;
539 	return (AE_OK);
540 }
541 
542 ACPI_EXPORT_SYMBOL(acpi_decode_pld_buffer)
543