1 /******************************************************************************* 2 * 3 * Module Name: rscalc - Calculate stream and list lengths 4 * 5 ******************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acresrc.h" 47 #include "acnamesp.h" 48 49 #define _COMPONENT ACPI_RESOURCES 50 ACPI_MODULE_NAME("rscalc") 51 52 /* Local prototypes */ 53 static u8 acpi_rs_count_set_bits(u16 bit_field); 54 55 static acpi_rs_length 56 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source); 57 58 static u32 59 acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length); 60 61 /******************************************************************************* 62 * 63 * FUNCTION: acpi_rs_count_set_bits 64 * 65 * PARAMETERS: bit_field - Field in which to count bits 66 * 67 * RETURN: Number of bits set within the field 68 * 69 * DESCRIPTION: Count the number of bits set in a resource field. Used for 70 * (Short descriptor) interrupt and DMA lists. 71 * 72 ******************************************************************************/ 73 74 static u8 acpi_rs_count_set_bits(u16 bit_field) 75 { 76 u8 bits_set; 77 78 ACPI_FUNCTION_ENTRY(); 79 80 for (bits_set = 0; bit_field; bits_set++) { 81 82 /* Zero the least significant bit that is set */ 83 84 bit_field &= (u16) (bit_field - 1); 85 } 86 87 return (bits_set); 88 } 89 90 /******************************************************************************* 91 * 92 * FUNCTION: acpi_rs_struct_option_length 93 * 94 * PARAMETERS: resource_source - Pointer to optional descriptor field 95 * 96 * RETURN: Status 97 * 98 * DESCRIPTION: Common code to handle optional resource_source_index and 99 * resource_source fields in some Large descriptors. Used during 100 * list-to-stream conversion 101 * 102 ******************************************************************************/ 103 104 static acpi_rs_length 105 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source) 106 { 107 ACPI_FUNCTION_ENTRY(); 108 109 /* 110 * If the resource_source string is valid, return the size of the string 111 * (string_length includes the NULL terminator) plus the size of the 112 * resource_source_index (1). 113 */ 114 if (resource_source->string_ptr) { 115 return ((acpi_rs_length)(resource_source->string_length + 1)); 116 } 117 118 return (0); 119 } 120 121 /******************************************************************************* 122 * 123 * FUNCTION: acpi_rs_stream_option_length 124 * 125 * PARAMETERS: resource_length - Length from the resource header 126 * minimum_total_length - Minimum length of this resource, before 127 * any optional fields. Includes header size 128 * 129 * RETURN: Length of optional string (0 if no string present) 130 * 131 * DESCRIPTION: Common code to handle optional resource_source_index and 132 * resource_source fields in some Large descriptors. Used during 133 * stream-to-list conversion 134 * 135 ******************************************************************************/ 136 137 static u32 138 acpi_rs_stream_option_length(u32 resource_length, 139 u32 minimum_aml_resource_length) 140 { 141 u32 string_length = 0; 142 143 ACPI_FUNCTION_ENTRY(); 144 145 /* 146 * The resource_source_index and resource_source are optional elements of 147 * some Large-type resource descriptors. 148 */ 149 150 /* 151 * If the length of the actual resource descriptor is greater than the 152 * ACPI spec-defined minimum length, it means that a resource_source_index 153 * exists and is followed by a (required) null terminated string. The 154 * string length (including the null terminator) is the resource length 155 * minus the minimum length, minus one byte for the resource_source_index 156 * itself. 157 */ 158 if (resource_length > minimum_aml_resource_length) { 159 160 /* Compute the length of the optional string */ 161 162 string_length = 163 resource_length - minimum_aml_resource_length - 1; 164 } 165 166 /* 167 * Round the length up to a multiple of the native word in order to 168 * guarantee that the entire resource descriptor is native word aligned 169 */ 170 return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length)); 171 } 172 173 /******************************************************************************* 174 * 175 * FUNCTION: acpi_rs_get_aml_length 176 * 177 * PARAMETERS: resource - Pointer to the resource linked list 178 * resource_list_size - Size of the resource linked list 179 * size_needed - Where the required size is returned 180 * 181 * RETURN: Status 182 * 183 * DESCRIPTION: Takes a linked list of internal resource descriptors and 184 * calculates the size buffer needed to hold the corresponding 185 * external resource byte stream. 186 * 187 ******************************************************************************/ 188 189 acpi_status 190 acpi_rs_get_aml_length(struct acpi_resource *resource, 191 acpi_size resource_list_size, acpi_size *size_needed) 192 { 193 acpi_size aml_size_needed = 0; 194 struct acpi_resource *resource_end; 195 acpi_rs_length total_size; 196 197 ACPI_FUNCTION_TRACE(rs_get_aml_length); 198 199 /* Traverse entire list of internal resource descriptors */ 200 201 resource_end = 202 ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size); 203 while (resource < resource_end) { 204 205 /* Validate the descriptor type */ 206 207 if (resource->type > ACPI_RESOURCE_TYPE_MAX) { 208 return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE); 209 } 210 211 /* Sanity check the length. It must not be zero, or we loop forever */ 212 213 if (!resource->length) { 214 return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH); 215 } 216 217 /* Get the base size of the (external stream) resource descriptor */ 218 219 total_size = acpi_gbl_aml_resource_sizes[resource->type]; 220 221 /* 222 * Augment the base size for descriptors with optional and/or 223 * variable-length fields 224 */ 225 switch (resource->type) { 226 case ACPI_RESOURCE_TYPE_IRQ: 227 228 /* Length can be 3 or 2 */ 229 230 if (resource->data.irq.descriptor_length == 2) { 231 total_size--; 232 } 233 break; 234 235 case ACPI_RESOURCE_TYPE_START_DEPENDENT: 236 237 /* Length can be 1 or 0 */ 238 239 if (resource->data.irq.descriptor_length == 0) { 240 total_size--; 241 } 242 break; 243 244 case ACPI_RESOURCE_TYPE_VENDOR: 245 /* 246 * Vendor Defined Resource: 247 * For a Vendor Specific resource, if the Length is between 1 and 7 248 * it will be created as a Small Resource data type, otherwise it 249 * is a Large Resource data type. 250 */ 251 if (resource->data.vendor.byte_length > 7) { 252 253 /* Base size of a Large resource descriptor */ 254 255 total_size = 256 sizeof(struct aml_resource_large_header); 257 } 258 259 /* Add the size of the vendor-specific data */ 260 261 total_size = (acpi_rs_length) 262 (total_size + resource->data.vendor.byte_length); 263 break; 264 265 case ACPI_RESOURCE_TYPE_END_TAG: 266 /* 267 * End Tag: 268 * We are done -- return the accumulated total size. 269 */ 270 *size_needed = aml_size_needed + total_size; 271 272 /* Normal exit */ 273 274 return_ACPI_STATUS(AE_OK); 275 276 case ACPI_RESOURCE_TYPE_ADDRESS16: 277 /* 278 * 16-Bit Address Resource: 279 * Add the size of the optional resource_source info 280 */ 281 total_size = (acpi_rs_length)(total_size + 282 acpi_rs_struct_option_length 283 (&resource->data. 284 address16. 285 resource_source)); 286 break; 287 288 case ACPI_RESOURCE_TYPE_ADDRESS32: 289 /* 290 * 32-Bit Address Resource: 291 * Add the size of the optional resource_source info 292 */ 293 total_size = (acpi_rs_length)(total_size + 294 acpi_rs_struct_option_length 295 (&resource->data. 296 address32. 297 resource_source)); 298 break; 299 300 case ACPI_RESOURCE_TYPE_ADDRESS64: 301 /* 302 * 64-Bit Address Resource: 303 * Add the size of the optional resource_source info 304 */ 305 total_size = (acpi_rs_length)(total_size + 306 acpi_rs_struct_option_length 307 (&resource->data. 308 address64. 309 resource_source)); 310 break; 311 312 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: 313 /* 314 * Extended IRQ Resource: 315 * Add the size of each additional optional interrupt beyond the 316 * required 1 (4 bytes for each u32 interrupt number) 317 */ 318 total_size = (acpi_rs_length)(total_size + 319 ((resource->data. 320 extended_irq. 321 interrupt_count - 322 1) * 4) + 323 /* Add the size of the optional resource_source info */ 324 acpi_rs_struct_option_length 325 (&resource->data. 326 extended_irq. 327 resource_source)); 328 break; 329 330 case ACPI_RESOURCE_TYPE_GPIO: 331 332 total_size = (acpi_rs_length)(total_size + 333 (resource->data.gpio. 334 pin_table_length * 2) + 335 resource->data.gpio. 336 resource_source. 337 string_length + 338 resource->data.gpio. 339 vendor_length); 340 341 break; 342 343 case ACPI_RESOURCE_TYPE_SERIAL_BUS: 344 345 total_size = 346 acpi_gbl_aml_resource_serial_bus_sizes[resource-> 347 data. 348 common_serial_bus. 349 type]; 350 351 total_size = (acpi_rs_length)(total_size + 352 resource->data. 353 i2c_serial_bus. 354 resource_source. 355 string_length + 356 resource->data. 357 i2c_serial_bus. 358 vendor_length); 359 360 break; 361 362 default: 363 364 break; 365 } 366 367 /* Update the total */ 368 369 aml_size_needed += total_size; 370 371 /* Point to the next object */ 372 373 resource = 374 ACPI_ADD_PTR(struct acpi_resource, resource, 375 resource->length); 376 } 377 378 /* Did not find an end_tag resource descriptor */ 379 380 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); 381 } 382 383 /******************************************************************************* 384 * 385 * FUNCTION: acpi_rs_get_list_length 386 * 387 * PARAMETERS: aml_buffer - Pointer to the resource byte stream 388 * aml_buffer_length - Size of aml_buffer 389 * size_needed - Where the size needed is returned 390 * 391 * RETURN: Status 392 * 393 * DESCRIPTION: Takes an external resource byte stream and calculates the size 394 * buffer needed to hold the corresponding internal resource 395 * descriptor linked list. 396 * 397 ******************************************************************************/ 398 399 acpi_status 400 acpi_rs_get_list_length(u8 *aml_buffer, 401 u32 aml_buffer_length, acpi_size *size_needed) 402 { 403 acpi_status status; 404 u8 *end_aml; 405 u8 *buffer; 406 u32 buffer_size; 407 u16 temp16; 408 u16 resource_length; 409 u32 extra_struct_bytes; 410 u8 resource_index; 411 u8 minimum_aml_resource_length; 412 union aml_resource *aml_resource; 413 414 ACPI_FUNCTION_TRACE(rs_get_list_length); 415 416 *size_needed = ACPI_RS_SIZE_MIN; /* Minimum size is one end_tag */ 417 end_aml = aml_buffer + aml_buffer_length; 418 419 /* Walk the list of AML resource descriptors */ 420 421 while (aml_buffer < end_aml) { 422 423 /* Validate the Resource Type and Resource Length */ 424 425 status = 426 acpi_ut_validate_resource(NULL, aml_buffer, 427 &resource_index); 428 if (ACPI_FAILURE(status)) { 429 /* 430 * Exit on failure. Cannot continue because the descriptor length 431 * may be bogus also. 432 */ 433 return_ACPI_STATUS(status); 434 } 435 436 aml_resource = (void *)aml_buffer; 437 438 /* Get the resource length and base (minimum) AML size */ 439 440 resource_length = acpi_ut_get_resource_length(aml_buffer); 441 minimum_aml_resource_length = 442 acpi_gbl_resource_aml_sizes[resource_index]; 443 444 /* 445 * Augment the size for descriptors with optional 446 * and/or variable length fields 447 */ 448 extra_struct_bytes = 0; 449 buffer = 450 aml_buffer + acpi_ut_get_resource_header_length(aml_buffer); 451 452 switch (acpi_ut_get_resource_type(aml_buffer)) { 453 case ACPI_RESOURCE_NAME_IRQ: 454 /* 455 * IRQ Resource: 456 * Get the number of bits set in the 16-bit IRQ mask 457 */ 458 ACPI_MOVE_16_TO_16(&temp16, buffer); 459 extra_struct_bytes = acpi_rs_count_set_bits(temp16); 460 break; 461 462 case ACPI_RESOURCE_NAME_DMA: 463 /* 464 * DMA Resource: 465 * Get the number of bits set in the 8-bit DMA mask 466 */ 467 extra_struct_bytes = acpi_rs_count_set_bits(*buffer); 468 break; 469 470 case ACPI_RESOURCE_NAME_VENDOR_SMALL: 471 case ACPI_RESOURCE_NAME_VENDOR_LARGE: 472 /* 473 * Vendor Resource: 474 * Get the number of vendor data bytes 475 */ 476 extra_struct_bytes = resource_length; 477 478 /* 479 * There is already one byte included in the minimum 480 * descriptor size. If there are extra struct bytes, 481 * subtract one from the count. 482 */ 483 if (extra_struct_bytes) { 484 extra_struct_bytes--; 485 } 486 break; 487 488 case ACPI_RESOURCE_NAME_END_TAG: 489 /* 490 * End Tag: This is the normal exit 491 */ 492 return_ACPI_STATUS(AE_OK); 493 494 case ACPI_RESOURCE_NAME_ADDRESS32: 495 case ACPI_RESOURCE_NAME_ADDRESS16: 496 case ACPI_RESOURCE_NAME_ADDRESS64: 497 /* 498 * Address Resource: 499 * Add the size of the optional resource_source 500 */ 501 extra_struct_bytes = 502 acpi_rs_stream_option_length(resource_length, 503 minimum_aml_resource_length); 504 break; 505 506 case ACPI_RESOURCE_NAME_EXTENDED_IRQ: 507 /* 508 * Extended IRQ Resource: 509 * Using the interrupt_table_length, add 4 bytes for each additional 510 * interrupt. Note: at least one interrupt is required and is 511 * included in the minimum descriptor size (reason for the -1) 512 */ 513 extra_struct_bytes = (buffer[1] - 1) * sizeof(u32); 514 515 /* Add the size of the optional resource_source */ 516 517 extra_struct_bytes += 518 acpi_rs_stream_option_length(resource_length - 519 extra_struct_bytes, 520 minimum_aml_resource_length); 521 break; 522 523 case ACPI_RESOURCE_NAME_GPIO: 524 525 /* Vendor data is optional */ 526 527 if (aml_resource->gpio.vendor_length) { 528 extra_struct_bytes += 529 aml_resource->gpio.vendor_offset - 530 aml_resource->gpio.pin_table_offset + 531 aml_resource->gpio.vendor_length; 532 } else { 533 extra_struct_bytes += 534 aml_resource->large_header.resource_length + 535 sizeof(struct aml_resource_large_header) - 536 aml_resource->gpio.pin_table_offset; 537 } 538 break; 539 540 case ACPI_RESOURCE_NAME_SERIAL_BUS: 541 542 minimum_aml_resource_length = 543 acpi_gbl_resource_aml_serial_bus_sizes 544 [aml_resource->common_serial_bus.type]; 545 extra_struct_bytes += 546 aml_resource->common_serial_bus.resource_length - 547 minimum_aml_resource_length; 548 break; 549 550 default: 551 552 break; 553 } 554 555 /* 556 * Update the required buffer size for the internal descriptor structs 557 * 558 * Important: Round the size up for the appropriate alignment. This 559 * is a requirement on IA64. 560 */ 561 if (acpi_ut_get_resource_type(aml_buffer) == 562 ACPI_RESOURCE_NAME_SERIAL_BUS) { 563 buffer_size = 564 acpi_gbl_resource_struct_serial_bus_sizes 565 [aml_resource->common_serial_bus.type] + 566 extra_struct_bytes; 567 } else { 568 buffer_size = 569 acpi_gbl_resource_struct_sizes[resource_index] + 570 extra_struct_bytes; 571 } 572 573 buffer_size = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size); 574 *size_needed += buffer_size; 575 576 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, 577 "Type %.2X, AmlLength %.2X InternalLength %.2X\n", 578 acpi_ut_get_resource_type(aml_buffer), 579 acpi_ut_get_descriptor_length(aml_buffer), 580 buffer_size)); 581 582 /* 583 * Point to the next resource within the AML stream using the length 584 * contained in the resource descriptor header 585 */ 586 aml_buffer += acpi_ut_get_descriptor_length(aml_buffer); 587 } 588 589 /* Did not find an end_tag resource descriptor */ 590 591 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); 592 } 593 594 /******************************************************************************* 595 * 596 * FUNCTION: acpi_rs_get_pci_routing_table_length 597 * 598 * PARAMETERS: package_object - Pointer to the package object 599 * buffer_size_needed - u32 pointer of the size buffer 600 * needed to properly return the 601 * parsed data 602 * 603 * RETURN: Status 604 * 605 * DESCRIPTION: Given a package representing a PCI routing table, this 606 * calculates the size of the corresponding linked list of 607 * descriptions. 608 * 609 ******************************************************************************/ 610 611 acpi_status 612 acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, 613 acpi_size *buffer_size_needed) 614 { 615 u32 number_of_elements; 616 acpi_size temp_size_needed = 0; 617 union acpi_operand_object **top_object_list; 618 u32 index; 619 union acpi_operand_object *package_element; 620 union acpi_operand_object **sub_object_list; 621 u8 name_found; 622 u32 table_index; 623 624 ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length); 625 626 number_of_elements = package_object->package.count; 627 628 /* 629 * Calculate the size of the return buffer. 630 * The base size is the number of elements * the sizes of the 631 * structures. Additional space for the strings is added below. 632 * The minus one is to subtract the size of the u8 Source[1] 633 * member because it is added below. 634 * 635 * But each PRT_ENTRY structure has a pointer to a string and 636 * the size of that string must be found. 637 */ 638 top_object_list = package_object->package.elements; 639 640 for (index = 0; index < number_of_elements; index++) { 641 642 /* Dereference the subpackage */ 643 644 package_element = *top_object_list; 645 646 /* We must have a valid Package object */ 647 648 if (!package_element || 649 (package_element->common.type != ACPI_TYPE_PACKAGE)) { 650 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 651 } 652 653 /* 654 * The sub_object_list will now point to an array of the 655 * four IRQ elements: Address, Pin, Source and source_index 656 */ 657 sub_object_list = package_element->package.elements; 658 659 /* Scan the irq_table_elements for the Source Name String */ 660 661 name_found = FALSE; 662 663 for (table_index = 0; 664 table_index < package_element->package.count 665 && !name_found; table_index++) { 666 if (*sub_object_list && /* Null object allowed */ 667 ((ACPI_TYPE_STRING == 668 (*sub_object_list)->common.type) || 669 ((ACPI_TYPE_LOCAL_REFERENCE == 670 (*sub_object_list)->common.type) && 671 ((*sub_object_list)->reference.class == 672 ACPI_REFCLASS_NAME)))) { 673 name_found = TRUE; 674 } else { 675 /* Look at the next element */ 676 677 sub_object_list++; 678 } 679 } 680 681 temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4); 682 683 /* Was a String type found? */ 684 685 if (name_found) { 686 if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) { 687 /* 688 * The length String.Length field does not include the 689 * terminating NULL, add 1 690 */ 691 temp_size_needed += ((acpi_size) 692 (*sub_object_list)->string. 693 length + 1); 694 } else { 695 temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node); 696 } 697 } else { 698 /* 699 * If no name was found, then this is a NULL, which is 700 * translated as a u32 zero. 701 */ 702 temp_size_needed += sizeof(u32); 703 } 704 705 /* Round up the size since each element must be aligned */ 706 707 temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed); 708 709 /* Point to the next union acpi_operand_object */ 710 711 top_object_list++; 712 } 713 714 /* 715 * Add an extra element to the end of the list, essentially a 716 * NULL terminator 717 */ 718 *buffer_size_needed = 719 temp_size_needed + sizeof(struct acpi_pci_routing_table); 720 return_ACPI_STATUS(AE_OK); 721 } 722