xref: /openbmc/linux/drivers/acpi/acpica/psxface.c (revision 82e6fdd6)
1 /******************************************************************************
2  *
3  * Module Name: psxface - Parser external interfaces
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2018, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acparser.h"
47 #include "acdispat.h"
48 #include "acinterp.h"
49 #include "actables.h"
50 #include "acnamesp.h"
51 
52 #define _COMPONENT          ACPI_PARSER
53 ACPI_MODULE_NAME("psxface")
54 
55 /* Local Prototypes */
56 static void
57 acpi_ps_update_parameter_list(struct acpi_evaluate_info *info, u16 action);
58 
59 /*******************************************************************************
60  *
61  * FUNCTION:    acpi_debug_trace
62  *
63  * PARAMETERS:  method_name     - Valid ACPI name string
64  *              debug_level     - Optional level mask. 0 to use default
65  *              debug_layer     - Optional layer mask. 0 to use default
66  *              flags           - bit 1: one shot(1) or persistent(0)
67  *
68  * RETURN:      Status
69  *
70  * DESCRIPTION: External interface to enable debug tracing during control
71  *              method execution
72  *
73  ******************************************************************************/
74 
75 acpi_status
76 acpi_debug_trace(const char *name, u32 debug_level, u32 debug_layer, u32 flags)
77 {
78 	acpi_status status;
79 
80 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
81 	if (ACPI_FAILURE(status)) {
82 		return (status);
83 	}
84 
85 	acpi_gbl_trace_method_name = name;
86 	acpi_gbl_trace_flags = flags;
87 	acpi_gbl_trace_dbg_level = debug_level;
88 	acpi_gbl_trace_dbg_layer = debug_layer;
89 	status = AE_OK;
90 
91 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
92 	return (status);
93 }
94 
95 /*******************************************************************************
96  *
97  * FUNCTION:    acpi_ps_execute_method
98  *
99  * PARAMETERS:  info            - Method info block, contains:
100  *                  node            - Method Node to execute
101  *                  obj_desc        - Method object
102  *                  parameters      - List of parameters to pass to the method,
103  *                                    terminated by NULL. Params itself may be
104  *                                    NULL if no parameters are being passed.
105  *                  return_object   - Where to put method's return value (if
106  *                                    any). If NULL, no value is returned.
107  *                  parameter_type  - Type of Parameter list
108  *                  return_object   - Where to put method's return value (if
109  *                                    any). If NULL, no value is returned.
110  *                  pass_number     - Parse or execute pass
111  *
112  * RETURN:      Status
113  *
114  * DESCRIPTION: Execute a control method
115  *
116  ******************************************************************************/
117 
118 acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info)
119 {
120 	acpi_status status;
121 	union acpi_parse_object *op;
122 	struct acpi_walk_state *walk_state;
123 
124 	ACPI_FUNCTION_TRACE(ps_execute_method);
125 
126 	/* Quick validation of DSDT header */
127 
128 	acpi_tb_check_dsdt_header();
129 
130 	/* Validate the Info and method Node */
131 
132 	if (!info || !info->node) {
133 		return_ACPI_STATUS(AE_NULL_ENTRY);
134 	}
135 
136 	/* Init for new method, wait on concurrency semaphore */
137 
138 	status =
139 	    acpi_ds_begin_method_execution(info->node, info->obj_desc, NULL);
140 	if (ACPI_FAILURE(status)) {
141 		return_ACPI_STATUS(status);
142 	}
143 
144 	/*
145 	 * The caller "owns" the parameters, so give each one an extra reference
146 	 */
147 	acpi_ps_update_parameter_list(info, REF_INCREMENT);
148 
149 	/*
150 	 * Execute the method. Performs parse simultaneously
151 	 */
152 	ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
153 			  "**** Begin Method Parse/Execute [%4.4s] **** Node=%p Obj=%p\n",
154 			  info->node->name.ascii, info->node, info->obj_desc));
155 
156 	/* Create and init a Root Node */
157 
158 	op = acpi_ps_create_scope_op(info->obj_desc->method.aml_start);
159 	if (!op) {
160 		status = AE_NO_MEMORY;
161 		goto cleanup;
162 	}
163 
164 	/* Create and initialize a new walk state */
165 
166 	info->pass_number = ACPI_IMODE_EXECUTE;
167 	walk_state =
168 	    acpi_ds_create_walk_state(info->obj_desc->method.owner_id, NULL,
169 				      NULL, NULL);
170 	if (!walk_state) {
171 		status = AE_NO_MEMORY;
172 		goto cleanup;
173 	}
174 
175 	status = acpi_ds_init_aml_walk(walk_state, op, info->node,
176 				       info->obj_desc->method.aml_start,
177 				       info->obj_desc->method.aml_length, info,
178 				       info->pass_number);
179 	if (ACPI_FAILURE(status)) {
180 		acpi_ds_delete_walk_state(walk_state);
181 		goto cleanup;
182 	}
183 
184 	if (info->obj_desc->method.info_flags & ACPI_METHOD_MODULE_LEVEL) {
185 		walk_state->parse_flags |= ACPI_PARSE_MODULE_LEVEL;
186 	}
187 
188 	/* Invoke an internal method if necessary */
189 
190 	if (info->obj_desc->method.info_flags & ACPI_METHOD_INTERNAL_ONLY) {
191 		status =
192 		    info->obj_desc->method.dispatch.implementation(walk_state);
193 		info->return_object = walk_state->return_desc;
194 
195 		/* Cleanup states */
196 
197 		acpi_ds_scope_stack_clear(walk_state);
198 		acpi_ps_cleanup_scope(&walk_state->parser_state);
199 		acpi_ds_terminate_control_method(walk_state->method_desc,
200 						 walk_state);
201 		acpi_ds_delete_walk_state(walk_state);
202 		goto cleanup;
203 	}
204 
205 	/*
206 	 * Start method evaluation with an implicit return of zero.
207 	 * This is done for Windows compatibility.
208 	 */
209 	if (acpi_gbl_enable_interpreter_slack) {
210 		walk_state->implicit_return_obj =
211 		    acpi_ut_create_integer_object((u64) 0);
212 		if (!walk_state->implicit_return_obj) {
213 			status = AE_NO_MEMORY;
214 			acpi_ds_delete_walk_state(walk_state);
215 			goto cleanup;
216 		}
217 	}
218 
219 	/* Parse the AML */
220 
221 	status = acpi_ps_parse_aml(walk_state);
222 
223 	/* walk_state was deleted by parse_aml */
224 
225 cleanup:
226 	acpi_ps_delete_parse_tree(op);
227 
228 	/* Take away the extra reference that we gave the parameters above */
229 
230 	acpi_ps_update_parameter_list(info, REF_DECREMENT);
231 
232 	/* Exit now if error above */
233 
234 	if (ACPI_FAILURE(status)) {
235 		return_ACPI_STATUS(status);
236 	}
237 
238 	/*
239 	 * If the method has returned an object, signal this to the caller with
240 	 * a control exception code
241 	 */
242 	if (info->return_object) {
243 		ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Method returned ObjDesc=%p\n",
244 				  info->return_object));
245 		ACPI_DUMP_STACK_ENTRY(info->return_object);
246 
247 		status = AE_CTRL_RETURN_VALUE;
248 	}
249 
250 	return_ACPI_STATUS(status);
251 }
252 
253 /*******************************************************************************
254  *
255  * FUNCTION:    acpi_ps_execute_table
256  *
257  * PARAMETERS:  info            - Method info block, contains:
258  *              node            - Node to where the is entered into the
259  *                                namespace
260  *              obj_desc        - Pseudo method object describing the AML
261  *                                code of the entire table
262  *              pass_number     - Parse or execute pass
263  *
264  * RETURN:      Status
265  *
266  * DESCRIPTION: Execute a table
267  *
268  ******************************************************************************/
269 
270 acpi_status acpi_ps_execute_table(struct acpi_evaluate_info *info)
271 {
272 	acpi_status status;
273 	union acpi_parse_object *op = NULL;
274 	struct acpi_walk_state *walk_state = NULL;
275 
276 	ACPI_FUNCTION_TRACE(ps_execute_table);
277 
278 	/* Create and init a Root Node */
279 
280 	op = acpi_ps_create_scope_op(info->obj_desc->method.aml_start);
281 	if (!op) {
282 		status = AE_NO_MEMORY;
283 		goto cleanup;
284 	}
285 
286 	/* Create and initialize a new walk state */
287 
288 	walk_state =
289 	    acpi_ds_create_walk_state(info->obj_desc->method.owner_id, NULL,
290 				      NULL, NULL);
291 	if (!walk_state) {
292 		status = AE_NO_MEMORY;
293 		goto cleanup;
294 	}
295 
296 	status = acpi_ds_init_aml_walk(walk_state, op, info->node,
297 				       info->obj_desc->method.aml_start,
298 				       info->obj_desc->method.aml_length, info,
299 				       info->pass_number);
300 	if (ACPI_FAILURE(status)) {
301 		goto cleanup;
302 	}
303 
304 	if (info->obj_desc->method.info_flags & ACPI_METHOD_MODULE_LEVEL) {
305 		walk_state->parse_flags |= ACPI_PARSE_MODULE_LEVEL;
306 	}
307 
308 	/* Info->Node is the default location to load the table  */
309 
310 	if (info->node && info->node != acpi_gbl_root_node) {
311 		status =
312 		    acpi_ds_scope_stack_push(info->node, ACPI_TYPE_METHOD,
313 					     walk_state);
314 		if (ACPI_FAILURE(status)) {
315 			goto cleanup;
316 		}
317 	}
318 
319 	/*
320 	 * Parse the AML, walk_state will be deleted by parse_aml
321 	 */
322 	acpi_ex_enter_interpreter();
323 	status = acpi_ps_parse_aml(walk_state);
324 	acpi_ex_exit_interpreter();
325 	walk_state = NULL;
326 
327 cleanup:
328 	if (walk_state) {
329 		acpi_ds_delete_walk_state(walk_state);
330 	}
331 	if (op) {
332 		acpi_ps_delete_parse_tree(op);
333 	}
334 	return_ACPI_STATUS(status);
335 }
336 
337 /*******************************************************************************
338  *
339  * FUNCTION:    acpi_ps_update_parameter_list
340  *
341  * PARAMETERS:  info            - See struct acpi_evaluate_info
342  *                                (Used: parameter_type and Parameters)
343  *              action          - Add or Remove reference
344  *
345  * RETURN:      Status
346  *
347  * DESCRIPTION: Update reference count on all method parameter objects
348  *
349  ******************************************************************************/
350 
351 static void
352 acpi_ps_update_parameter_list(struct acpi_evaluate_info *info, u16 action)
353 {
354 	u32 i;
355 
356 	if (info->parameters) {
357 
358 		/* Update reference count for each parameter */
359 
360 		for (i = 0; info->parameters[i]; i++) {
361 
362 			/* Ignore errors, just do them all */
363 
364 			(void)acpi_ut_update_object_reference(info->
365 							      parameters[i],
366 							      action);
367 		}
368 	}
369 }
370