xref: /openbmc/linux/drivers/acpi/acpica/nsload.c (revision bc5aa3a0)
1 /******************************************************************************
2  *
3  * Module Name: nsload - namespace loading/expanding/contracting procedures
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2016, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acnamesp.h"
47 #include "acdispat.h"
48 #include "actables.h"
49 
50 #define _COMPONENT          ACPI_NAMESPACE
51 ACPI_MODULE_NAME("nsload")
52 
53 /* Local prototypes */
54 #ifdef ACPI_FUTURE_IMPLEMENTATION
55 acpi_status acpi_ns_unload_namespace(acpi_handle handle);
56 
57 static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle);
58 #endif
59 
60 #ifndef ACPI_NO_METHOD_EXECUTION
61 /*******************************************************************************
62  *
63  * FUNCTION:    acpi_ns_load_table
64  *
65  * PARAMETERS:  table_index     - Index for table to be loaded
66  *              node            - Owning NS node
67  *
68  * RETURN:      Status
69  *
70  * DESCRIPTION: Load one ACPI table into the namespace
71  *
72  ******************************************************************************/
73 
74 acpi_status
75 acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node)
76 {
77 	acpi_status status;
78 
79 	ACPI_FUNCTION_TRACE(ns_load_table);
80 
81 	/*
82 	 * Parse the table and load the namespace with all named
83 	 * objects found within. Control methods are NOT parsed
84 	 * at this time. In fact, the control methods cannot be
85 	 * parsed until the entire namespace is loaded, because
86 	 * if a control method makes a forward reference (call)
87 	 * to another control method, we can't continue parsing
88 	 * because we don't know how many arguments to parse next!
89 	 */
90 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
91 	if (ACPI_FAILURE(status)) {
92 		return_ACPI_STATUS(status);
93 	}
94 
95 	/* If table already loaded into namespace, just return */
96 
97 	if (acpi_tb_is_table_loaded(table_index)) {
98 		status = AE_ALREADY_EXISTS;
99 		goto unlock;
100 	}
101 
102 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
103 			  "**** Loading table into namespace ****\n"));
104 
105 	status = acpi_tb_allocate_owner_id(table_index);
106 	if (ACPI_FAILURE(status)) {
107 		goto unlock;
108 	}
109 
110 	status = acpi_ns_parse_table(table_index, node);
111 	if (ACPI_SUCCESS(status)) {
112 		acpi_tb_set_table_loaded_flag(table_index, TRUE);
113 	} else {
114 		/*
115 		 * On error, delete any namespace objects created by this table.
116 		 * We cannot initialize these objects, so delete them. There are
117 		 * a couple of expecially bad cases:
118 		 * AE_ALREADY_EXISTS - namespace collision.
119 		 * AE_NOT_FOUND - the target of a Scope operator does not
120 		 * exist. This target of Scope must already exist in the
121 		 * namespace, as per the ACPI specification.
122 		 */
123 		(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
124 		acpi_ns_delete_namespace_by_owner(acpi_gbl_root_table_list.
125 						  tables[table_index].owner_id);
126 
127 		acpi_tb_release_owner_id(table_index);
128 		return_ACPI_STATUS(status);
129 	}
130 
131 unlock:
132 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
133 
134 	if (ACPI_FAILURE(status)) {
135 		return_ACPI_STATUS(status);
136 	}
137 
138 	/*
139 	 * Now we can parse the control methods. We always parse
140 	 * them here for a sanity check, and if configured for
141 	 * just-in-time parsing, we delete the control method
142 	 * parse trees.
143 	 */
144 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
145 			  "**** Begin Table Object Initialization\n"));
146 
147 	status = acpi_ds_initialize_objects(table_index, node);
148 
149 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
150 			  "**** Completed Table Object Initialization\n"));
151 
152 	/*
153 	 * Execute any module-level code that was detected during the table load
154 	 * phase. Although illegal since ACPI 2.0, there are many machines that
155 	 * contain this type of code. Each block of detected executable AML code
156 	 * outside of any control method is wrapped with a temporary control
157 	 * method object and placed on a global list. The methods on this list
158 	 * are executed below.
159 	 *
160 	 * This case executes the module-level code for each table immediately
161 	 * after the table has been loaded. This provides compatibility with
162 	 * other ACPI implementations. Optionally, the execution can be deferred
163 	 * until later, see acpi_initialize_objects.
164 	 */
165 	if (!acpi_gbl_group_module_level_code) {
166 		acpi_ns_exec_module_code_list();
167 	}
168 
169 	return_ACPI_STATUS(status);
170 }
171 
172 #ifdef ACPI_OBSOLETE_FUNCTIONS
173 /*******************************************************************************
174  *
175  * FUNCTION:    acpi_load_namespace
176  *
177  * PARAMETERS:  None
178  *
179  * RETURN:      Status
180  *
181  * DESCRIPTION: Load the name space from what ever is pointed to by DSDT.
182  *              (DSDT points to either the BIOS or a buffer.)
183  *
184  ******************************************************************************/
185 
186 acpi_status acpi_ns_load_namespace(void)
187 {
188 	acpi_status status;
189 
190 	ACPI_FUNCTION_TRACE(acpi_load_name_space);
191 
192 	/* There must be at least a DSDT installed */
193 
194 	if (acpi_gbl_DSDT == NULL) {
195 		ACPI_ERROR((AE_INFO, "DSDT is not in memory"));
196 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
197 	}
198 
199 	/*
200 	 * Load the namespace. The DSDT is required,
201 	 * but the SSDT and PSDT tables are optional.
202 	 */
203 	status = acpi_ns_load_table_by_type(ACPI_TABLE_ID_DSDT);
204 	if (ACPI_FAILURE(status)) {
205 		return_ACPI_STATUS(status);
206 	}
207 
208 	/* Ignore exceptions from these */
209 
210 	(void)acpi_ns_load_table_by_type(ACPI_TABLE_ID_SSDT);
211 	(void)acpi_ns_load_table_by_type(ACPI_TABLE_ID_PSDT);
212 
213 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
214 			      "ACPI Namespace successfully loaded at root %p\n",
215 			      acpi_gbl_root_node));
216 
217 	return_ACPI_STATUS(status);
218 }
219 #endif
220 
221 #ifdef ACPI_FUTURE_IMPLEMENTATION
222 /*******************************************************************************
223  *
224  * FUNCTION:    acpi_ns_delete_subtree
225  *
226  * PARAMETERS:  start_handle        - Handle in namespace where search begins
227  *
228  * RETURNS      Status
229  *
230  * DESCRIPTION: Walks the namespace starting at the given handle and deletes
231  *              all objects, entries, and scopes in the entire subtree.
232  *
233  *              Namespace/Interpreter should be locked or the subsystem should
234  *              be in shutdown before this routine is called.
235  *
236  ******************************************************************************/
237 
238 static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle)
239 {
240 	acpi_status status;
241 	acpi_handle child_handle;
242 	acpi_handle parent_handle;
243 	acpi_handle next_child_handle;
244 	acpi_handle dummy;
245 	u32 level;
246 
247 	ACPI_FUNCTION_TRACE(ns_delete_subtree);
248 
249 	parent_handle = start_handle;
250 	child_handle = NULL;
251 	level = 1;
252 
253 	/*
254 	 * Traverse the tree of objects until we bubble back up
255 	 * to where we started.
256 	 */
257 	while (level > 0) {
258 
259 		/* Attempt to get the next object in this scope */
260 
261 		status = acpi_get_next_object(ACPI_TYPE_ANY, parent_handle,
262 					      child_handle, &next_child_handle);
263 
264 		child_handle = next_child_handle;
265 
266 		/* Did we get a new object? */
267 
268 		if (ACPI_SUCCESS(status)) {
269 
270 			/* Check if this object has any children */
271 
272 			if (ACPI_SUCCESS
273 			    (acpi_get_next_object
274 			     (ACPI_TYPE_ANY, child_handle, NULL, &dummy))) {
275 				/*
276 				 * There is at least one child of this object,
277 				 * visit the object
278 				 */
279 				level++;
280 				parent_handle = child_handle;
281 				child_handle = NULL;
282 			}
283 		} else {
284 			/*
285 			 * No more children in this object, go back up to
286 			 * the object's parent
287 			 */
288 			level--;
289 
290 			/* Delete all children now */
291 
292 			acpi_ns_delete_children(child_handle);
293 
294 			child_handle = parent_handle;
295 			status = acpi_get_parent(parent_handle, &parent_handle);
296 			if (ACPI_FAILURE(status)) {
297 				return_ACPI_STATUS(status);
298 			}
299 		}
300 	}
301 
302 	/* Now delete the starting object, and we are done */
303 
304 	acpi_ns_remove_node(child_handle);
305 	return_ACPI_STATUS(AE_OK);
306 }
307 
308 /*******************************************************************************
309  *
310  *  FUNCTION:       acpi_ns_unload_name_space
311  *
312  *  PARAMETERS:     handle          - Root of namespace subtree to be deleted
313  *
314  *  RETURN:         Status
315  *
316  *  DESCRIPTION:    Shrinks the namespace, typically in response to an undocking
317  *                  event. Deletes an entire subtree starting from (and
318  *                  including) the given handle.
319  *
320  ******************************************************************************/
321 
322 acpi_status acpi_ns_unload_namespace(acpi_handle handle)
323 {
324 	acpi_status status;
325 
326 	ACPI_FUNCTION_TRACE(ns_unload_name_space);
327 
328 	/* Parameter validation */
329 
330 	if (!acpi_gbl_root_node) {
331 		return_ACPI_STATUS(AE_NO_NAMESPACE);
332 	}
333 
334 	if (!handle) {
335 		return_ACPI_STATUS(AE_BAD_PARAMETER);
336 	}
337 
338 	/* This function does the real work */
339 
340 	status = acpi_ns_delete_subtree(handle);
341 	return_ACPI_STATUS(status);
342 }
343 #endif
344 #endif
345