xref: /openbmc/linux/drivers/acpi/acpica/hwxfsleep.c (revision 9cfc5c90)
1 /******************************************************************************
2  *
3  * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2015, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #define EXPORT_ACPI_INTERFACES
45 
46 #include <acpi/acpi.h>
47 #include "accommon.h"
48 
49 #define _COMPONENT          ACPI_HARDWARE
50 ACPI_MODULE_NAME("hwxfsleep")
51 
52 /* Local prototypes */
53 #if (!ACPI_REDUCED_HARDWARE)
54 static acpi_status
55 acpi_hw_set_firmware_waking_vectors(struct acpi_table_facs *facs,
56 				    acpi_physical_address physical_address,
57 				    acpi_physical_address physical_address64);
58 #endif
59 
60 static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
61 
62 /*
63  * Dispatch table used to efficiently branch to the various sleep
64  * functions.
65  */
66 #define ACPI_SLEEP_FUNCTION_ID         0
67 #define ACPI_WAKE_PREP_FUNCTION_ID     1
68 #define ACPI_WAKE_FUNCTION_ID          2
69 
70 /* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */
71 
72 static struct acpi_sleep_functions acpi_sleep_dispatch[] = {
73 	{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep),
74 	 acpi_hw_extended_sleep},
75 	{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep),
76 	 acpi_hw_extended_wake_prep},
77 	{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake}
78 };
79 
80 /*
81  * These functions are removed for the ACPI_REDUCED_HARDWARE case:
82  *      acpi_set_firmware_waking_vectors
83  *      acpi_set_firmware_waking_vector
84  *      acpi_set_firmware_waking_vector64
85  *      acpi_enter_sleep_state_s4bios
86  */
87 
88 #if (!ACPI_REDUCED_HARDWARE)
89 /*******************************************************************************
90  *
91  * FUNCTION:    acpi_hw_set_firmware_waking_vectors
92  *
93  * PARAMETERS:  facs                - Pointer to FACS table
94  *              physical_address    - 32-bit physical address of ACPI real mode
95  *                                    entry point.
96  *              physical_address64  - 64-bit physical address of ACPI protected
97  *                                    mode entry point.
98  *
99  * RETURN:      Status
100  *
101  * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
102  *
103  ******************************************************************************/
104 
105 static acpi_status
106 acpi_hw_set_firmware_waking_vectors(struct acpi_table_facs *facs,
107 				    acpi_physical_address physical_address,
108 				    acpi_physical_address physical_address64)
109 {
110 	ACPI_FUNCTION_TRACE(acpi_hw_set_firmware_waking_vectors);
111 
112 
113 	/*
114 	 * According to the ACPI specification 2.0c and later, the 64-bit
115 	 * waking vector should be cleared and the 32-bit waking vector should
116 	 * be used, unless we want the wake-up code to be called by the BIOS in
117 	 * Protected Mode.  Some systems (for example HP dv5-1004nr) are known
118 	 * to fail to resume if the 64-bit vector is used.
119 	 */
120 
121 	/* Set the 32-bit vector */
122 
123 	facs->firmware_waking_vector = (u32)physical_address;
124 
125 	if (facs->length > 32) {
126 		if (facs->version >= 1) {
127 
128 			/* Set the 64-bit vector */
129 
130 			facs->xfirmware_waking_vector = physical_address64;
131 		} else {
132 			/* Clear the 64-bit vector if it exists */
133 
134 			facs->xfirmware_waking_vector = 0;
135 		}
136 	}
137 
138 	return_ACPI_STATUS(AE_OK);
139 }
140 
141 /*******************************************************************************
142  *
143  * FUNCTION:    acpi_set_firmware_waking_vectors
144  *
145  * PARAMETERS:  physical_address    - 32-bit physical address of ACPI real mode
146  *                                    entry point.
147  *              physical_address64  - 64-bit physical address of ACPI protected
148  *                                    mode entry point.
149  *
150  * RETURN:      Status
151  *
152  * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
153  *
154  ******************************************************************************/
155 
156 acpi_status
157 acpi_set_firmware_waking_vectors(acpi_physical_address physical_address,
158 				 acpi_physical_address physical_address64)
159 {
160 
161 	ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vectors);
162 
163 	if (acpi_gbl_FACS) {
164 		(void)acpi_hw_set_firmware_waking_vectors(acpi_gbl_FACS,
165 							  physical_address,
166 							  physical_address64);
167 	}
168 
169 	return_ACPI_STATUS(AE_OK);
170 }
171 
172 ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vectors)
173 
174 /*******************************************************************************
175  *
176  * FUNCTION:    acpi_set_firmware_waking_vector
177  *
178  * PARAMETERS:  physical_address    - 32-bit physical address of ACPI real mode
179  *                                    entry point.
180  *
181  * RETURN:      Status
182  *
183  * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS
184  *
185  ******************************************************************************/
186 acpi_status acpi_set_firmware_waking_vector(u32 physical_address)
187 {
188 	acpi_status status;
189 
190 	ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
191 
192 	status = acpi_set_firmware_waking_vectors((acpi_physical_address)
193 						  physical_address, 0);
194 
195 	return_ACPI_STATUS(status);
196 }
197 
198 ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
199 
200 #if ACPI_MACHINE_WIDTH == 64
201 /*******************************************************************************
202  *
203  * FUNCTION:    acpi_set_firmware_waking_vector64
204  *
205  * PARAMETERS:  physical_address    - 64-bit physical address of ACPI protected
206  *                                    mode entry point.
207  *
208  * RETURN:      Status
209  *
210  * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if
211  *              it exists in the table. This function is intended for use with
212  *              64-bit host operating systems.
213  *
214  ******************************************************************************/
215 acpi_status acpi_set_firmware_waking_vector64(u64 physical_address)
216 {
217 	acpi_status status;
218 
219 	ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64);
220 
221 	status = acpi_set_firmware_waking_vectors(0,
222 						  (acpi_physical_address)
223 						  physical_address);
224 
225 	return_ACPI_STATUS(status);
226 }
227 
228 ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64)
229 #endif
230 /*******************************************************************************
231  *
232  * FUNCTION:    acpi_enter_sleep_state_s4bios
233  *
234  * PARAMETERS:  None
235  *
236  * RETURN:      Status
237  *
238  * DESCRIPTION: Perform a S4 bios request.
239  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
240  *
241  ******************************************************************************/
242 acpi_status acpi_enter_sleep_state_s4bios(void)
243 {
244 	u32 in_value;
245 	acpi_status status;
246 
247 	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
248 
249 	/* Clear the wake status bit (PM1) */
250 
251 	status =
252 	    acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
253 	if (ACPI_FAILURE(status)) {
254 		return_ACPI_STATUS(status);
255 	}
256 
257 	status = acpi_hw_clear_acpi_status();
258 	if (ACPI_FAILURE(status)) {
259 		return_ACPI_STATUS(status);
260 	}
261 
262 	/*
263 	 * 1) Disable/Clear all GPEs
264 	 * 2) Enable all wakeup GPEs
265 	 */
266 	status = acpi_hw_disable_all_gpes();
267 	if (ACPI_FAILURE(status)) {
268 		return_ACPI_STATUS(status);
269 	}
270 	acpi_gbl_system_awake_and_running = FALSE;
271 
272 	status = acpi_hw_enable_all_wakeup_gpes();
273 	if (ACPI_FAILURE(status)) {
274 		return_ACPI_STATUS(status);
275 	}
276 
277 	ACPI_FLUSH_CPU_CACHE();
278 
279 	status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
280 				    (u32)acpi_gbl_FADT.s4_bios_request, 8);
281 
282 	do {
283 		acpi_os_stall(ACPI_USEC_PER_MSEC);
284 		status =
285 		    acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
286 		if (ACPI_FAILURE(status)) {
287 			return_ACPI_STATUS(status);
288 		}
289 	} while (!in_value);
290 
291 	return_ACPI_STATUS(AE_OK);
292 }
293 
294 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
295 #endif				/* !ACPI_REDUCED_HARDWARE */
296 /*******************************************************************************
297  *
298  * FUNCTION:    acpi_hw_sleep_dispatch
299  *
300  * PARAMETERS:  sleep_state         - Which sleep state to enter/exit
301  *              function_id         - Sleep, wake_prep, or Wake
302  *
303  * RETURN:      Status from the invoked sleep handling function.
304  *
305  * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling
306  *              function.
307  *
308  ******************************************************************************/
309 static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
310 {
311 	acpi_status status;
312 	struct acpi_sleep_functions *sleep_functions =
313 	    &acpi_sleep_dispatch[function_id];
314 
315 #if (!ACPI_REDUCED_HARDWARE)
316 	/*
317 	 * If the Hardware Reduced flag is set (from the FADT), we must
318 	 * use the extended sleep registers (FADT). Note: As per the ACPI
319 	 * specification, these extended registers are to be used for HW-reduced
320 	 * platforms only. They are not general-purpose replacements for the
321 	 * legacy PM register sleep support.
322 	 */
323 	if (acpi_gbl_reduced_hardware) {
324 		status = sleep_functions->extended_function(sleep_state);
325 	} else {
326 		/* Legacy sleep */
327 
328 		status = sleep_functions->legacy_function(sleep_state);
329 	}
330 
331 	return (status);
332 
333 #else
334 	/*
335 	 * For the case where reduced-hardware-only code is being generated,
336 	 * we know that only the extended sleep registers are available
337 	 */
338 	status = sleep_functions->extended_function(sleep_state);
339 	return (status);
340 
341 #endif				/* !ACPI_REDUCED_HARDWARE */
342 }
343 
344 /*******************************************************************************
345  *
346  * FUNCTION:    acpi_enter_sleep_state_prep
347  *
348  * PARAMETERS:  sleep_state         - Which sleep state to enter
349  *
350  * RETURN:      Status
351  *
352  * DESCRIPTION: Prepare to enter a system sleep state.
353  *              This function must execute with interrupts enabled.
354  *              We break sleeping into 2 stages so that OSPM can handle
355  *              various OS-specific tasks between the two steps.
356  *
357  ******************************************************************************/
358 
359 acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
360 {
361 	acpi_status status;
362 	struct acpi_object_list arg_list;
363 	union acpi_object arg;
364 	u32 sst_value;
365 
366 	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
367 
368 	status = acpi_get_sleep_type_data(sleep_state,
369 					  &acpi_gbl_sleep_type_a,
370 					  &acpi_gbl_sleep_type_b);
371 	if (ACPI_FAILURE(status)) {
372 		return_ACPI_STATUS(status);
373 	}
374 
375 	/* Execute the _PTS method (Prepare To Sleep) */
376 
377 	arg_list.count = 1;
378 	arg_list.pointer = &arg;
379 	arg.type = ACPI_TYPE_INTEGER;
380 	arg.integer.value = sleep_state;
381 
382 	status =
383 	    acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL);
384 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
385 		return_ACPI_STATUS(status);
386 	}
387 
388 	/* Setup the argument to the _SST method (System STatus) */
389 
390 	switch (sleep_state) {
391 	case ACPI_STATE_S0:
392 
393 		sst_value = ACPI_SST_WORKING;
394 		break;
395 
396 	case ACPI_STATE_S1:
397 	case ACPI_STATE_S2:
398 	case ACPI_STATE_S3:
399 
400 		sst_value = ACPI_SST_SLEEPING;
401 		break;
402 
403 	case ACPI_STATE_S4:
404 
405 		sst_value = ACPI_SST_SLEEP_CONTEXT;
406 		break;
407 
408 	default:
409 
410 		sst_value = ACPI_SST_INDICATOR_OFF;	/* Default is off */
411 		break;
412 	}
413 
414 	/*
415 	 * Set the system indicators to show the desired sleep state.
416 	 * _SST is an optional method (return no error if not found)
417 	 */
418 	acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value);
419 	return_ACPI_STATUS(AE_OK);
420 }
421 
422 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
423 
424 /*******************************************************************************
425  *
426  * FUNCTION:    acpi_enter_sleep_state
427  *
428  * PARAMETERS:  sleep_state         - Which sleep state to enter
429  *
430  * RETURN:      Status
431  *
432  * DESCRIPTION: Enter a system sleep state
433  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
434  *
435  ******************************************************************************/
436 acpi_status acpi_enter_sleep_state(u8 sleep_state)
437 {
438 	acpi_status status;
439 
440 	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
441 
442 	if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
443 	    (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
444 		ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
445 			    acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
446 		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
447 	}
448 
449 	status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
450 	return_ACPI_STATUS(status);
451 }
452 
453 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
454 
455 /*******************************************************************************
456  *
457  * FUNCTION:    acpi_leave_sleep_state_prep
458  *
459  * PARAMETERS:  sleep_state         - Which sleep state we are exiting
460  *
461  * RETURN:      Status
462  *
463  * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
464  *              sleep. Called with interrupts DISABLED.
465  *              We break wake/resume into 2 stages so that OSPM can handle
466  *              various OS-specific tasks between the two steps.
467  *
468  ******************************************************************************/
469 acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
470 {
471 	acpi_status status;
472 
473 	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
474 
475 	status =
476 	    acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID);
477 	return_ACPI_STATUS(status);
478 }
479 
480 ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep)
481 
482 /*******************************************************************************
483  *
484  * FUNCTION:    acpi_leave_sleep_state
485  *
486  * PARAMETERS:  sleep_state         - Which sleep state we are exiting
487  *
488  * RETURN:      Status
489  *
490  * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
491  *              Called with interrupts ENABLED.
492  *
493  ******************************************************************************/
494 acpi_status acpi_leave_sleep_state(u8 sleep_state)
495 {
496 	acpi_status status;
497 
498 	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
499 
500 	status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION_ID);
501 	return_ACPI_STATUS(status);
502 }
503 
504 ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)
505