xref: /openbmc/linux/drivers/acpi/acpica/hwxfsleep.c (revision 79f382b9)
1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2 /******************************************************************************
3  *
4  * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces
5  *
6  * Copyright (C) 2000 - 2021, Intel Corp.
7  *
8  *****************************************************************************/
9 
10 #define EXPORT_ACPI_INTERFACES
11 
12 #include <acpi/acpi.h>
13 #include "accommon.h"
14 
15 #define _COMPONENT          ACPI_HARDWARE
16 ACPI_MODULE_NAME("hwxfsleep")
17 
18 /* Local prototypes */
19 #if (!ACPI_REDUCED_HARDWARE)
20 static acpi_status
21 acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs,
22 				   acpi_physical_address physical_address,
23 				   acpi_physical_address physical_address64);
24 #endif
25 
26 /*
27  * These functions are removed for the ACPI_REDUCED_HARDWARE case:
28  *      acpi_set_firmware_waking_vector
29  *      acpi_enter_sleep_state_s4bios
30  */
31 
32 #if (!ACPI_REDUCED_HARDWARE)
33 /*******************************************************************************
34  *
35  * FUNCTION:    acpi_hw_set_firmware_waking_vector
36  *
37  * PARAMETERS:  facs                - Pointer to FACS table
38  *              physical_address    - 32-bit physical address of ACPI real mode
39  *                                    entry point
40  *              physical_address64  - 64-bit physical address of ACPI protected
41  *                                    mode entry point
42  *
43  * RETURN:      Status
44  *
45  * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
46  *
47  ******************************************************************************/
48 
49 static acpi_status
50 acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs,
51 				   acpi_physical_address physical_address,
52 				   acpi_physical_address physical_address64)
53 {
54 	ACPI_FUNCTION_TRACE(acpi_hw_set_firmware_waking_vector);
55 
56 
57 	/*
58 	 * According to the ACPI specification 2.0c and later, the 64-bit
59 	 * waking vector should be cleared and the 32-bit waking vector should
60 	 * be used, unless we want the wake-up code to be called by the BIOS in
61 	 * Protected Mode.  Some systems (for example HP dv5-1004nr) are known
62 	 * to fail to resume if the 64-bit vector is used.
63 	 */
64 
65 	/* Set the 32-bit vector */
66 
67 	facs->firmware_waking_vector = (u32)physical_address;
68 
69 	if (facs->length > 32) {
70 		if (facs->version >= 1) {
71 
72 			/* Set the 64-bit vector */
73 
74 			facs->xfirmware_waking_vector = physical_address64;
75 		} else {
76 			/* Clear the 64-bit vector if it exists */
77 
78 			facs->xfirmware_waking_vector = 0;
79 		}
80 	}
81 
82 	return_ACPI_STATUS(AE_OK);
83 }
84 
85 /*******************************************************************************
86  *
87  * FUNCTION:    acpi_set_firmware_waking_vector
88  *
89  * PARAMETERS:  physical_address    - 32-bit physical address of ACPI real mode
90  *                                    entry point
91  *              physical_address64  - 64-bit physical address of ACPI protected
92  *                                    mode entry point
93  *
94  * RETURN:      Status
95  *
96  * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
97  *
98  ******************************************************************************/
99 
100 acpi_status
101 acpi_set_firmware_waking_vector(acpi_physical_address physical_address,
102 				acpi_physical_address physical_address64)
103 {
104 
105 	ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
106 
107 	if (acpi_gbl_FACS) {
108 		(void)acpi_hw_set_firmware_waking_vector(acpi_gbl_FACS,
109 							 physical_address,
110 							 physical_address64);
111 	}
112 
113 	return_ACPI_STATUS(AE_OK);
114 }
115 
116 ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
117 
118 /*******************************************************************************
119  *
120  * FUNCTION:    acpi_enter_sleep_state_s4bios
121  *
122  * PARAMETERS:  None
123  *
124  * RETURN:      Status
125  *
126  * DESCRIPTION: Perform a S4 bios request.
127  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
128  *
129  ******************************************************************************/
130 acpi_status acpi_enter_sleep_state_s4bios(void)
131 {
132 	u32 in_value;
133 	acpi_status status;
134 
135 	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
136 
137 	/* Clear the wake status bit (PM1) */
138 
139 	status =
140 	    acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
141 	if (ACPI_FAILURE(status)) {
142 		return_ACPI_STATUS(status);
143 	}
144 
145 	status = acpi_hw_clear_acpi_status();
146 	if (ACPI_FAILURE(status)) {
147 		return_ACPI_STATUS(status);
148 	}
149 
150 	/*
151 	 * 1) Disable all GPEs
152 	 * 2) Enable all wakeup GPEs
153 	 */
154 	status = acpi_hw_disable_all_gpes();
155 	if (ACPI_FAILURE(status)) {
156 		return_ACPI_STATUS(status);
157 	}
158 	acpi_gbl_system_awake_and_running = FALSE;
159 
160 	status = acpi_hw_enable_all_wakeup_gpes();
161 	if (ACPI_FAILURE(status)) {
162 		return_ACPI_STATUS(status);
163 	}
164 
165 	ACPI_FLUSH_CPU_CACHE();
166 
167 	status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
168 				    (u32)acpi_gbl_FADT.s4_bios_request, 8);
169 	if (ACPI_FAILURE(status)) {
170 		return_ACPI_STATUS(status);
171 	}
172 
173 	do {
174 		acpi_os_stall(ACPI_USEC_PER_MSEC);
175 		status =
176 		    acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
177 		if (ACPI_FAILURE(status)) {
178 			return_ACPI_STATUS(status);
179 		}
180 
181 	} while (!in_value);
182 
183 	return_ACPI_STATUS(AE_OK);
184 }
185 
186 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
187 #endif				/* !ACPI_REDUCED_HARDWARE */
188 
189 /*******************************************************************************
190  *
191  * FUNCTION:    acpi_enter_sleep_state_prep
192  *
193  * PARAMETERS:  sleep_state         - Which sleep state to enter
194  *
195  * RETURN:      Status
196  *
197  * DESCRIPTION: Prepare to enter a system sleep state.
198  *              This function must execute with interrupts enabled.
199  *              We break sleeping into 2 stages so that OSPM can handle
200  *              various OS-specific tasks between the two steps.
201  *
202  ******************************************************************************/
203 
204 acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
205 {
206 	acpi_status status;
207 	struct acpi_object_list arg_list;
208 	union acpi_object arg;
209 	u32 sst_value;
210 
211 	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
212 
213 	status = acpi_get_sleep_type_data(sleep_state,
214 					  &acpi_gbl_sleep_type_a,
215 					  &acpi_gbl_sleep_type_b);
216 	if (ACPI_FAILURE(status)) {
217 		return_ACPI_STATUS(status);
218 	}
219 
220 	/* Execute the _PTS method (Prepare To Sleep) */
221 
222 	arg_list.count = 1;
223 	arg_list.pointer = &arg;
224 	arg.type = ACPI_TYPE_INTEGER;
225 	arg.integer.value = sleep_state;
226 
227 	status =
228 	    acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL);
229 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
230 		return_ACPI_STATUS(status);
231 	}
232 
233 	/* Setup the argument to the _SST method (System STatus) */
234 
235 	switch (sleep_state) {
236 	case ACPI_STATE_S0:
237 
238 		sst_value = ACPI_SST_WORKING;
239 		break;
240 
241 	case ACPI_STATE_S1:
242 	case ACPI_STATE_S2:
243 	case ACPI_STATE_S3:
244 
245 		sst_value = ACPI_SST_SLEEPING;
246 		break;
247 
248 	case ACPI_STATE_S4:
249 
250 		sst_value = ACPI_SST_SLEEP_CONTEXT;
251 		break;
252 
253 	default:
254 
255 		sst_value = ACPI_SST_INDICATOR_OFF;	/* Default is off */
256 		break;
257 	}
258 
259 	/*
260 	 * Set the system indicators to show the desired sleep state.
261 	 * _SST is an optional method (return no error if not found)
262 	 */
263 	acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value);
264 	return_ACPI_STATUS(AE_OK);
265 }
266 
267 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
268 
269 /*******************************************************************************
270  *
271  * FUNCTION:    acpi_enter_sleep_state
272  *
273  * PARAMETERS:  sleep_state         - Which sleep state to enter
274  *
275  * RETURN:      Status
276  *
277  * DESCRIPTION: Enter a system sleep state
278  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
279  *
280  ******************************************************************************/
281 acpi_status acpi_enter_sleep_state(u8 sleep_state)
282 {
283 	acpi_status status;
284 
285 	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
286 
287 	if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
288 	    (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
289 		ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
290 			    acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
291 		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
292 	}
293 
294 #if !ACPI_REDUCED_HARDWARE
295 	if (!acpi_gbl_reduced_hardware)
296 		status = acpi_hw_legacy_sleep(sleep_state);
297 	else
298 #endif
299 		status = acpi_hw_extended_sleep(sleep_state);
300 	return_ACPI_STATUS(status);
301 }
302 
303 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
304 
305 /*******************************************************************************
306  *
307  * FUNCTION:    acpi_leave_sleep_state_prep
308  *
309  * PARAMETERS:  sleep_state         - Which sleep state we are exiting
310  *
311  * RETURN:      Status
312  *
313  * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
314  *              sleep. Called with interrupts DISABLED.
315  *              We break wake/resume into 2 stages so that OSPM can handle
316  *              various OS-specific tasks between the two steps.
317  *
318  ******************************************************************************/
319 acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
320 {
321 	acpi_status status;
322 
323 	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
324 
325 #if !ACPI_REDUCED_HARDWARE
326 	if (!acpi_gbl_reduced_hardware)
327 		status = acpi_hw_legacy_wake_prep(sleep_state);
328 	else
329 #endif
330 		status = acpi_hw_extended_wake_prep(sleep_state);
331 	return_ACPI_STATUS(status);
332 }
333 
334 ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep)
335 
336 /*******************************************************************************
337  *
338  * FUNCTION:    acpi_leave_sleep_state
339  *
340  * PARAMETERS:  sleep_state         - Which sleep state we are exiting
341  *
342  * RETURN:      Status
343  *
344  * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
345  *              Called with interrupts ENABLED.
346  *
347  ******************************************************************************/
348 acpi_status acpi_leave_sleep_state(u8 sleep_state)
349 {
350 	acpi_status status;
351 
352 	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
353 
354 #if !ACPI_REDUCED_HARDWARE
355 	if (!acpi_gbl_reduced_hardware)
356 		status = acpi_hw_legacy_wake(sleep_state);
357 	else
358 #endif
359 		status = acpi_hw_extended_wake(sleep_state);
360 	return_ACPI_STATUS(status);
361 }
362 
363 ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)
364