1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 2 /****************************************************************************** 3 * 4 * Module Name: hwvalid - I/O request validation 5 * 6 * Copyright (C) 2000 - 2022, Intel Corp. 7 * 8 *****************************************************************************/ 9 10 #include <acpi/acpi.h> 11 #include "accommon.h" 12 13 #define _COMPONENT ACPI_HARDWARE 14 ACPI_MODULE_NAME("hwvalid") 15 16 /* Local prototypes */ 17 static acpi_status 18 acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width); 19 20 /* 21 * Protected I/O ports. Some ports are always illegal, and some are 22 * conditionally illegal. This table must remain ordered by port address. 23 * 24 * The table is used to implement the Microsoft port access rules that 25 * first appeared in Windows XP. Some ports are always illegal, and some 26 * ports are only illegal if the BIOS calls _OSI with nothing newer than 27 * the specific _OSI strings. 28 * 29 * This provides ACPICA with the desired port protections and 30 * Microsoft compatibility. 31 * 32 * Description of port entries: 33 * DMA: DMA controller 34 * PIC0: Programmable Interrupt Controller (8259A) 35 * PIT1: System Timer 1 36 * PIT2: System Timer 2 failsafe 37 * RTC: Real-time clock 38 * CMOS: Extended CMOS 39 * DMA1: DMA 1 page registers 40 * DMA1L: DMA 1 Ch 0 low page 41 * DMA2: DMA 2 page registers 42 * DMA2L: DMA 2 low page refresh 43 * ARBC: Arbitration control 44 * SETUP: Reserved system board setup 45 * POS: POS channel select 46 * PIC1: Cascaded PIC 47 * IDMA: ISA DMA 48 * ELCR: PIC edge/level registers 49 * PCI: PCI configuration space 50 */ 51 static const struct acpi_port_info acpi_protected_ports[] = { 52 {"DMA", 0x0000, 0x000F, ACPI_OSI_WIN_XP}, 53 {"PIC0", 0x0020, 0x0021, ACPI_ALWAYS_ILLEGAL}, 54 {"PIT1", 0x0040, 0x0043, ACPI_OSI_WIN_XP}, 55 {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP}, 56 {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP}, 57 {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP}, 58 {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP}, 59 {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP}, 60 {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP}, 61 {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP}, 62 {"ARBC", 0x0090, 0x0091, ACPI_OSI_WIN_XP}, 63 {"SETUP", 0x0093, 0x0094, ACPI_OSI_WIN_XP}, 64 {"POS", 0x0096, 0x0097, ACPI_OSI_WIN_XP}, 65 {"PIC1", 0x00A0, 0x00A1, ACPI_ALWAYS_ILLEGAL}, 66 {"IDMA", 0x00C0, 0x00DF, ACPI_OSI_WIN_XP}, 67 {"ELCR", 0x04D0, 0x04D1, ACPI_ALWAYS_ILLEGAL}, 68 {"PCI", 0x0CF8, 0x0CFF, ACPI_OSI_WIN_XP} 69 }; 70 71 #define ACPI_PORT_INFO_ENTRIES ACPI_ARRAY_LENGTH (acpi_protected_ports) 72 73 /****************************************************************************** 74 * 75 * FUNCTION: acpi_hw_validate_io_request 76 * 77 * PARAMETERS: Address Address of I/O port/register 78 * bit_width Number of bits (8,16,32) 79 * 80 * RETURN: Status 81 * 82 * DESCRIPTION: Validates an I/O request (address/length). Certain ports are 83 * always illegal and some ports are only illegal depending on 84 * the requests the BIOS AML code makes to the predefined 85 * _OSI method. 86 * 87 ******************************************************************************/ 88 89 static acpi_status 90 acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) 91 { 92 u32 i; 93 u32 byte_width; 94 acpi_io_address last_address; 95 const struct acpi_port_info *port_info; 96 97 ACPI_FUNCTION_TRACE(hw_validate_io_request); 98 99 /* Supported widths are 8/16/32 */ 100 101 if ((bit_width != 8) && (bit_width != 16) && (bit_width != 32)) { 102 ACPI_ERROR((AE_INFO, 103 "Bad BitWidth parameter: %8.8X", bit_width)); 104 return_ACPI_STATUS(AE_BAD_PARAMETER); 105 } 106 107 port_info = acpi_protected_ports; 108 byte_width = ACPI_DIV_8(bit_width); 109 last_address = address + byte_width - 1; 110 111 ACPI_DEBUG_PRINT((ACPI_DB_IO, 112 "Address %8.8X%8.8X LastAddress %8.8X%8.8X Length %X", 113 ACPI_FORMAT_UINT64(address), 114 ACPI_FORMAT_UINT64(last_address), byte_width)); 115 116 /* Maximum 16-bit address in I/O space */ 117 118 if (last_address > ACPI_UINT16_MAX) { 119 ACPI_ERROR((AE_INFO, 120 "Illegal I/O port address/length above 64K: %8.8X%8.8X/0x%X", 121 ACPI_FORMAT_UINT64(address), byte_width)); 122 return_ACPI_STATUS(AE_LIMIT); 123 } 124 125 /* Exit if requested address is not within the protected port table */ 126 127 if (address > acpi_protected_ports[ACPI_PORT_INFO_ENTRIES - 1].end) { 128 return_ACPI_STATUS(AE_OK); 129 } 130 131 /* Check request against the list of protected I/O ports */ 132 133 for (i = 0; i < ACPI_PORT_INFO_ENTRIES; i++, port_info++) { 134 /* 135 * Check if the requested address range will write to a reserved 136 * port. There are four cases to consider: 137 * 138 * 1) Address range is contained completely in the port address range 139 * 2) Address range overlaps port range at the port range start 140 * 3) Address range overlaps port range at the port range end 141 * 4) Address range completely encompasses the port range 142 */ 143 if ((address <= port_info->end) 144 && (last_address >= port_info->start)) { 145 146 /* Port illegality may depend on the _OSI calls made by the BIOS */ 147 148 if (port_info->osi_dependency == ACPI_ALWAYS_ILLEGAL || 149 acpi_gbl_osi_data == port_info->osi_dependency) { 150 ACPI_DEBUG_PRINT((ACPI_DB_VALUES, 151 "Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)\n", 152 ACPI_FORMAT_UINT64(address), 153 byte_width, port_info->name, 154 port_info->start, 155 port_info->end)); 156 157 return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); 158 } 159 } 160 161 /* Finished if address range ends before the end of this port */ 162 163 if (last_address <= port_info->end) { 164 break; 165 } 166 } 167 168 return_ACPI_STATUS(AE_OK); 169 } 170 171 /****************************************************************************** 172 * 173 * FUNCTION: acpi_hw_read_port 174 * 175 * PARAMETERS: Address Address of I/O port/register to read 176 * Value Where value (data) is returned 177 * Width Number of bits 178 * 179 * RETURN: Status and value read from port 180 * 181 * DESCRIPTION: Read data from an I/O port or register. This is a front-end 182 * to acpi_os_read_port that performs validation on both the port 183 * address and the length. 184 * 185 *****************************************************************************/ 186 187 acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) 188 { 189 acpi_status status; 190 u32 one_byte; 191 u32 i; 192 193 /* Truncate address to 16 bits if requested */ 194 195 if (acpi_gbl_truncate_io_addresses) { 196 address &= ACPI_UINT16_MAX; 197 } 198 199 /* Validate the entire request and perform the I/O */ 200 201 status = acpi_hw_validate_io_request(address, width); 202 if (ACPI_SUCCESS(status)) { 203 status = acpi_os_read_port(address, value, width); 204 return (status); 205 } 206 207 if (status != AE_AML_ILLEGAL_ADDRESS) { 208 return (status); 209 } 210 211 /* 212 * There has been a protection violation within the request. Fall 213 * back to byte granularity port I/O and ignore the failing bytes. 214 * This provides compatibility with other ACPI implementations. 215 */ 216 for (i = 0, *value = 0; i < width; i += 8) { 217 218 /* Validate and read one byte */ 219 220 if (acpi_hw_validate_io_request(address, 8) == AE_OK) { 221 status = acpi_os_read_port(address, &one_byte, 8); 222 if (ACPI_FAILURE(status)) { 223 return (status); 224 } 225 226 *value |= (one_byte << i); 227 } 228 229 address++; 230 } 231 232 return (AE_OK); 233 } 234 235 /****************************************************************************** 236 * 237 * FUNCTION: acpi_hw_write_port 238 * 239 * PARAMETERS: Address Address of I/O port/register to write 240 * Value Value to write 241 * Width Number of bits 242 * 243 * RETURN: Status 244 * 245 * DESCRIPTION: Write data to an I/O port or register. This is a front-end 246 * to acpi_os_write_port that performs validation on both the port 247 * address and the length. 248 * 249 *****************************************************************************/ 250 251 acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width) 252 { 253 acpi_status status; 254 u32 i; 255 256 /* Truncate address to 16 bits if requested */ 257 258 if (acpi_gbl_truncate_io_addresses) { 259 address &= ACPI_UINT16_MAX; 260 } 261 262 /* Validate the entire request and perform the I/O */ 263 264 status = acpi_hw_validate_io_request(address, width); 265 if (ACPI_SUCCESS(status)) { 266 status = acpi_os_write_port(address, value, width); 267 return (status); 268 } 269 270 if (status != AE_AML_ILLEGAL_ADDRESS) { 271 return (status); 272 } 273 274 /* 275 * There has been a protection violation within the request. Fall 276 * back to byte granularity port I/O and ignore the failing bytes. 277 * This provides compatibility with other ACPI implementations. 278 */ 279 for (i = 0; i < width; i += 8) { 280 281 /* Validate and write one byte */ 282 283 if (acpi_hw_validate_io_request(address, 8) == AE_OK) { 284 status = 285 acpi_os_write_port(address, (value >> i) & 0xFF, 8); 286 if (ACPI_FAILURE(status)) { 287 return (status); 288 } 289 } 290 291 address++; 292 } 293 294 return (AE_OK); 295 } 296 297 /****************************************************************************** 298 * 299 * FUNCTION: acpi_hw_validate_io_block 300 * 301 * PARAMETERS: Address Address of I/O port/register blobk 302 * bit_width Number of bits (8,16,32) in each register 303 * count Number of registers in the block 304 * 305 * RETURN: Status 306 * 307 * DESCRIPTION: Validates a block of I/O ports/registers. 308 * 309 ******************************************************************************/ 310 311 acpi_status acpi_hw_validate_io_block(u64 address, u32 bit_width, u32 count) 312 { 313 acpi_status status; 314 315 while (count--) { 316 status = acpi_hw_validate_io_request((acpi_io_address)address, 317 bit_width); 318 if (ACPI_FAILURE(status)) 319 return_ACPI_STATUS(status); 320 321 address += ACPI_DIV_8(bit_width); 322 } 323 324 return_ACPI_STATUS(AE_OK); 325 } 326