1 /****************************************************************************** 2 * 3 * Module Name: hwvalid - I/O request validation 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 47 #define _COMPONENT ACPI_HARDWARE 48 ACPI_MODULE_NAME("hwvalid") 49 50 /* Local prototypes */ 51 static acpi_status 52 acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width); 53 54 /* 55 * Protected I/O ports. Some ports are always illegal, and some are 56 * conditionally illegal. This table must remain ordered by port address. 57 * 58 * The table is used to implement the Microsoft port access rules that 59 * first appeared in Windows XP. Some ports are always illegal, and some 60 * ports are only illegal if the BIOS calls _OSI with a win_XP string or 61 * later (meaning that the BIOS itelf is post-XP.) 62 * 63 * This provides ACPICA with the desired port protections and 64 * Microsoft compatibility. 65 * 66 * Description of port entries: 67 * DMA: DMA controller 68 * PIC0: Programmable Interrupt Controller (8259A) 69 * PIT1: System Timer 1 70 * PIT2: System Timer 2 failsafe 71 * RTC: Real-time clock 72 * CMOS: Extended CMOS 73 * DMA1: DMA 1 page registers 74 * DMA1L: DMA 1 Ch 0 low page 75 * DMA2: DMA 2 page registers 76 * DMA2L: DMA 2 low page refresh 77 * ARBC: Arbitration control 78 * SETUP: Reserved system board setup 79 * POS: POS channel select 80 * PIC1: Cascaded PIC 81 * IDMA: ISA DMA 82 * ELCR: PIC edge/level registers 83 * PCI: PCI configuration space 84 */ 85 static const struct acpi_port_info acpi_protected_ports[] = { 86 {"DMA", 0x0000, 0x000F, ACPI_OSI_WIN_XP}, 87 {"PIC0", 0x0020, 0x0021, ACPI_ALWAYS_ILLEGAL}, 88 {"PIT1", 0x0040, 0x0043, ACPI_OSI_WIN_XP}, 89 {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP}, 90 {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP}, 91 {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP}, 92 {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP}, 93 {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP}, 94 {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP}, 95 {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP}, 96 {"ARBC", 0x0090, 0x0091, ACPI_OSI_WIN_XP}, 97 {"SETUP", 0x0093, 0x0094, ACPI_OSI_WIN_XP}, 98 {"POS", 0x0096, 0x0097, ACPI_OSI_WIN_XP}, 99 {"PIC1", 0x00A0, 0x00A1, ACPI_ALWAYS_ILLEGAL}, 100 {"IDMA", 0x00C0, 0x00DF, ACPI_OSI_WIN_XP}, 101 {"ELCR", 0x04D0, 0x04D1, ACPI_ALWAYS_ILLEGAL}, 102 {"PCI", 0x0CF8, 0x0CFF, ACPI_OSI_WIN_XP} 103 }; 104 105 #define ACPI_PORT_INFO_ENTRIES ACPI_ARRAY_LENGTH (acpi_protected_ports) 106 107 /****************************************************************************** 108 * 109 * FUNCTION: acpi_hw_validate_io_request 110 * 111 * PARAMETERS: Address Address of I/O port/register 112 * bit_width Number of bits (8,16,32) 113 * 114 * RETURN: Status 115 * 116 * DESCRIPTION: Validates an I/O request (address/length). Certain ports are 117 * always illegal and some ports are only illegal depending on 118 * the requests the BIOS AML code makes to the predefined 119 * _OSI method. 120 * 121 ******************************************************************************/ 122 123 static acpi_status 124 acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) 125 { 126 u32 i; 127 u32 byte_width; 128 acpi_io_address last_address; 129 const struct acpi_port_info *port_info; 130 131 ACPI_FUNCTION_TRACE(hw_validate_io_request); 132 133 /* Supported widths are 8/16/32 */ 134 135 if ((bit_width != 8) && (bit_width != 16) && (bit_width != 32)) { 136 ACPI_ERROR((AE_INFO, 137 "Bad BitWidth parameter: %8.8X", bit_width)); 138 return (AE_BAD_PARAMETER); 139 } 140 141 port_info = acpi_protected_ports; 142 byte_width = ACPI_DIV_8(bit_width); 143 last_address = address + byte_width - 1; 144 145 ACPI_DEBUG_PRINT((ACPI_DB_IO, 146 "Address %8.8X%8.8X LastAddress %8.8X%8.8X Length %X", 147 ACPI_FORMAT_UINT64(address), 148 ACPI_FORMAT_UINT64(last_address), byte_width)); 149 150 /* Maximum 16-bit address in I/O space */ 151 152 if (last_address > ACPI_UINT16_MAX) { 153 ACPI_ERROR((AE_INFO, 154 "Illegal I/O port address/length above 64K: %8.8X%8.8X/0x%X", 155 ACPI_FORMAT_UINT64(address), byte_width)); 156 return_ACPI_STATUS(AE_LIMIT); 157 } 158 159 /* Exit if requested address is not within the protected port table */ 160 161 if (address > acpi_protected_ports[ACPI_PORT_INFO_ENTRIES - 1].end) { 162 return_ACPI_STATUS(AE_OK); 163 } 164 165 /* Check request against the list of protected I/O ports */ 166 167 for (i = 0; i < ACPI_PORT_INFO_ENTRIES; i++, port_info++) { 168 /* 169 * Check if the requested address range will write to a reserved 170 * port. Four cases to consider: 171 * 172 * 1) Address range is contained completely in the port address range 173 * 2) Address range overlaps port range at the port range start 174 * 3) Address range overlaps port range at the port range end 175 * 4) Address range completely encompasses the port range 176 */ 177 if ((address <= port_info->end) 178 && (last_address >= port_info->start)) { 179 180 /* Port illegality may depend on the _OSI calls made by the BIOS */ 181 182 if (acpi_gbl_osi_data >= port_info->osi_dependency) { 183 ACPI_DEBUG_PRINT((ACPI_DB_IO, 184 "Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)", 185 ACPI_FORMAT_UINT64(address), 186 byte_width, port_info->name, 187 port_info->start, 188 port_info->end)); 189 190 return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); 191 } 192 } 193 194 /* Finished if address range ends before the end of this port */ 195 196 if (last_address <= port_info->end) { 197 break; 198 } 199 } 200 201 return_ACPI_STATUS(AE_OK); 202 } 203 204 /****************************************************************************** 205 * 206 * FUNCTION: acpi_hw_read_port 207 * 208 * PARAMETERS: Address Address of I/O port/register to read 209 * Value Where value is placed 210 * Width Number of bits 211 * 212 * RETURN: Status and value read from port 213 * 214 * DESCRIPTION: Read data from an I/O port or register. This is a front-end 215 * to acpi_os_read_port that performs validation on both the port 216 * address and the length. 217 * 218 *****************************************************************************/ 219 220 acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) 221 { 222 acpi_status status; 223 u32 one_byte; 224 u32 i; 225 226 /* Truncate address to 16 bits if requested */ 227 228 if (acpi_gbl_truncate_io_addresses) { 229 address &= ACPI_UINT16_MAX; 230 } 231 232 /* Validate the entire request and perform the I/O */ 233 234 status = acpi_hw_validate_io_request(address, width); 235 if (ACPI_SUCCESS(status)) { 236 status = acpi_os_read_port(address, value, width); 237 return (status); 238 } 239 240 if (status != AE_AML_ILLEGAL_ADDRESS) { 241 return (status); 242 } 243 244 /* 245 * There has been a protection violation within the request. Fall 246 * back to byte granularity port I/O and ignore the failing bytes. 247 * This provides Windows compatibility. 248 */ 249 for (i = 0, *value = 0; i < width; i += 8) { 250 251 /* Validate and read one byte */ 252 253 if (acpi_hw_validate_io_request(address, 8) == AE_OK) { 254 status = acpi_os_read_port(address, &one_byte, 8); 255 if (ACPI_FAILURE(status)) { 256 return (status); 257 } 258 259 *value |= (one_byte << i); 260 } 261 262 address++; 263 } 264 265 return (AE_OK); 266 } 267 268 /****************************************************************************** 269 * 270 * FUNCTION: acpi_hw_write_port 271 * 272 * PARAMETERS: Address Address of I/O port/register to write 273 * Value Value to write 274 * Width Number of bits 275 * 276 * RETURN: Status 277 * 278 * DESCRIPTION: Write data to an I/O port or register. This is a front-end 279 * to acpi_os_write_port that performs validation on both the port 280 * address and the length. 281 * 282 *****************************************************************************/ 283 284 acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width) 285 { 286 acpi_status status; 287 u32 i; 288 289 /* Truncate address to 16 bits if requested */ 290 291 if (acpi_gbl_truncate_io_addresses) { 292 address &= ACPI_UINT16_MAX; 293 } 294 295 /* Validate the entire request and perform the I/O */ 296 297 status = acpi_hw_validate_io_request(address, width); 298 if (ACPI_SUCCESS(status)) { 299 status = acpi_os_write_port(address, value, width); 300 return (status); 301 } 302 303 if (status != AE_AML_ILLEGAL_ADDRESS) { 304 return (status); 305 } 306 307 /* 308 * There has been a protection violation within the request. Fall 309 * back to byte granularity port I/O and ignore the failing bytes. 310 * This provides Windows compatibility. 311 */ 312 for (i = 0; i < width; i += 8) { 313 314 /* Validate and write one byte */ 315 316 if (acpi_hw_validate_io_request(address, 8) == AE_OK) { 317 status = 318 acpi_os_write_port(address, (value >> i) & 0xFF, 8); 319 if (ACPI_FAILURE(status)) { 320 return (status); 321 } 322 } 323 324 address++; 325 } 326 327 return (AE_OK); 328 } 329