1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 2 /****************************************************************************** 3 * 4 * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the 5 * original/legacy sleep/PM registers. 6 * 7 * Copyright (C) 2000 - 2019, Intel Corp. 8 * 9 *****************************************************************************/ 10 11 #include <acpi/acpi.h> 12 #include "accommon.h" 13 14 #define _COMPONENT ACPI_HARDWARE 15 ACPI_MODULE_NAME("hwsleep") 16 17 #if (!ACPI_REDUCED_HARDWARE) /* Entire module */ 18 /******************************************************************************* 19 * 20 * FUNCTION: acpi_hw_legacy_sleep 21 * 22 * PARAMETERS: sleep_state - Which sleep state to enter 23 * 24 * RETURN: Status 25 * 26 * DESCRIPTION: Enter a system sleep state via the legacy FADT PM registers 27 * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED 28 * 29 ******************************************************************************/ 30 acpi_status acpi_hw_legacy_sleep(u8 sleep_state) 31 { 32 struct acpi_bit_register_info *sleep_type_reg_info; 33 struct acpi_bit_register_info *sleep_enable_reg_info; 34 u32 pm1a_control; 35 u32 pm1b_control; 36 u32 in_value; 37 acpi_status status; 38 39 ACPI_FUNCTION_TRACE(hw_legacy_sleep); 40 41 sleep_type_reg_info = 42 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE); 43 sleep_enable_reg_info = 44 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE); 45 46 /* Clear wake status */ 47 48 status = acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 49 ACPI_CLEAR_STATUS); 50 if (ACPI_FAILURE(status)) { 51 return_ACPI_STATUS(status); 52 } 53 54 /* Disable all GPEs */ 55 status = acpi_hw_disable_all_gpes(); 56 if (ACPI_FAILURE(status)) { 57 return_ACPI_STATUS(status); 58 } 59 status = acpi_hw_clear_acpi_status(); 60 if (ACPI_FAILURE(status)) { 61 return_ACPI_STATUS(status); 62 } 63 acpi_gbl_system_awake_and_running = FALSE; 64 65 /* Enable all wakeup GPEs */ 66 status = acpi_hw_enable_all_wakeup_gpes(); 67 if (ACPI_FAILURE(status)) { 68 return_ACPI_STATUS(status); 69 } 70 71 /* Get current value of PM1A control */ 72 73 status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, 74 &pm1a_control); 75 if (ACPI_FAILURE(status)) { 76 return_ACPI_STATUS(status); 77 } 78 ACPI_DEBUG_PRINT((ACPI_DB_INIT, 79 "Entering sleep state [S%u]\n", sleep_state)); 80 81 /* Clear the SLP_EN and SLP_TYP fields */ 82 83 pm1a_control &= ~(sleep_type_reg_info->access_bit_mask | 84 sleep_enable_reg_info->access_bit_mask); 85 pm1b_control = pm1a_control; 86 87 /* Insert the SLP_TYP bits */ 88 89 pm1a_control |= 90 (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position); 91 pm1b_control |= 92 (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position); 93 94 /* 95 * We split the writes of SLP_TYP and SLP_EN to workaround 96 * poorly implemented hardware. 97 */ 98 99 /* Write #1: write the SLP_TYP data to the PM1 Control registers */ 100 101 status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control); 102 if (ACPI_FAILURE(status)) { 103 return_ACPI_STATUS(status); 104 } 105 106 /* Insert the sleep enable (SLP_EN) bit */ 107 108 pm1a_control |= sleep_enable_reg_info->access_bit_mask; 109 pm1b_control |= sleep_enable_reg_info->access_bit_mask; 110 111 /* Flush caches, as per ACPI specification */ 112 113 ACPI_FLUSH_CPU_CACHE(); 114 115 status = acpi_os_enter_sleep(sleep_state, pm1a_control, pm1b_control); 116 if (status == AE_CTRL_TERMINATE) { 117 return_ACPI_STATUS(AE_OK); 118 } 119 if (ACPI_FAILURE(status)) { 120 return_ACPI_STATUS(status); 121 } 122 123 /* Write #2: Write both SLP_TYP + SLP_EN */ 124 125 status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control); 126 if (ACPI_FAILURE(status)) { 127 return_ACPI_STATUS(status); 128 } 129 130 if (sleep_state > ACPI_STATE_S3) { 131 /* 132 * We wanted to sleep > S3, but it didn't happen (by virtue of the 133 * fact that we are still executing!) 134 * 135 * Wait ten seconds, then try again. This is to get S4/S5 to work on 136 * all machines. 137 * 138 * We wait so long to allow chipsets that poll this reg very slowly 139 * to still read the right value. Ideally, this block would go 140 * away entirely. 141 */ 142 acpi_os_stall(10 * ACPI_USEC_PER_SEC); 143 144 status = acpi_hw_register_write(ACPI_REGISTER_PM1_CONTROL, 145 sleep_enable_reg_info-> 146 access_bit_mask); 147 if (ACPI_FAILURE(status)) { 148 return_ACPI_STATUS(status); 149 } 150 } 151 152 /* Wait for transition back to Working State */ 153 154 do { 155 status = 156 acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); 157 if (ACPI_FAILURE(status)) { 158 return_ACPI_STATUS(status); 159 } 160 161 } while (!in_value); 162 163 return_ACPI_STATUS(AE_OK); 164 } 165 166 /******************************************************************************* 167 * 168 * FUNCTION: acpi_hw_legacy_wake_prep 169 * 170 * PARAMETERS: sleep_state - Which sleep state we just exited 171 * 172 * RETURN: Status 173 * 174 * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a 175 * sleep. 176 * Called with interrupts ENABLED. 177 * 178 ******************************************************************************/ 179 180 acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) 181 { 182 acpi_status status; 183 struct acpi_bit_register_info *sleep_type_reg_info; 184 struct acpi_bit_register_info *sleep_enable_reg_info; 185 u32 pm1a_control; 186 u32 pm1b_control; 187 188 ACPI_FUNCTION_TRACE(hw_legacy_wake_prep); 189 190 /* 191 * Set SLP_TYPE and SLP_EN to state S0. 192 * This is unclear from the ACPI Spec, but it is required 193 * by some machines. 194 */ 195 status = acpi_get_sleep_type_data(ACPI_STATE_S0, 196 &acpi_gbl_sleep_type_a, 197 &acpi_gbl_sleep_type_b); 198 if (ACPI_SUCCESS(status)) { 199 sleep_type_reg_info = 200 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE); 201 sleep_enable_reg_info = 202 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE); 203 204 /* Get current value of PM1A control */ 205 206 status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, 207 &pm1a_control); 208 if (ACPI_SUCCESS(status)) { 209 210 /* Clear the SLP_EN and SLP_TYP fields */ 211 212 pm1a_control &= ~(sleep_type_reg_info->access_bit_mask | 213 sleep_enable_reg_info-> 214 access_bit_mask); 215 pm1b_control = pm1a_control; 216 217 /* Insert the SLP_TYP bits */ 218 219 pm1a_control |= (acpi_gbl_sleep_type_a << 220 sleep_type_reg_info->bit_position); 221 pm1b_control |= (acpi_gbl_sleep_type_b << 222 sleep_type_reg_info->bit_position); 223 224 /* Write the control registers and ignore any errors */ 225 226 (void)acpi_hw_write_pm1_control(pm1a_control, 227 pm1b_control); 228 } 229 } 230 231 return_ACPI_STATUS(status); 232 } 233 234 /******************************************************************************* 235 * 236 * FUNCTION: acpi_hw_legacy_wake 237 * 238 * PARAMETERS: sleep_state - Which sleep state we just exited 239 * 240 * RETURN: Status 241 * 242 * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep 243 * Called with interrupts ENABLED. 244 * 245 ******************************************************************************/ 246 247 acpi_status acpi_hw_legacy_wake(u8 sleep_state) 248 { 249 acpi_status status; 250 251 ACPI_FUNCTION_TRACE(hw_legacy_wake); 252 253 /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ 254 255 acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; 256 acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); 257 258 /* 259 * GPEs must be enabled before _WAK is called as GPEs 260 * might get fired there 261 * 262 * Restore the GPEs: 263 * 1) Disable all GPEs 264 * 2) Enable all runtime GPEs 265 */ 266 status = acpi_hw_disable_all_gpes(); 267 if (ACPI_FAILURE(status)) { 268 return_ACPI_STATUS(status); 269 } 270 271 status = acpi_hw_enable_all_runtime_gpes(); 272 if (ACPI_FAILURE(status)) { 273 return_ACPI_STATUS(status); 274 } 275 276 /* 277 * Now we can execute _WAK, etc. Some machines require that the GPEs 278 * are enabled before the wake methods are executed. 279 */ 280 acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); 281 282 /* 283 * Some BIOS code assumes that WAK_STS will be cleared on resume 284 * and use it to determine whether the system is rebooting or 285 * resuming. Clear WAK_STS for compatibility. 286 */ 287 (void)acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 288 ACPI_CLEAR_STATUS); 289 acpi_gbl_system_awake_and_running = TRUE; 290 291 /* Enable power button */ 292 293 (void) 294 acpi_write_bit_register(acpi_gbl_fixed_event_info 295 [ACPI_EVENT_POWER_BUTTON]. 296 enable_register_id, ACPI_ENABLE_EVENT); 297 298 (void) 299 acpi_write_bit_register(acpi_gbl_fixed_event_info 300 [ACPI_EVENT_POWER_BUTTON]. 301 status_register_id, ACPI_CLEAR_STATUS); 302 303 acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); 304 return_ACPI_STATUS(status); 305 } 306 307 #endif /* !ACPI_REDUCED_HARDWARE */ 308