1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 2 /****************************************************************************** 3 * 4 * Module Name: exregion - ACPI default op_region (address space) handlers 5 * 6 * Copyright (C) 2000 - 2020, Intel Corp. 7 * 8 *****************************************************************************/ 9 10 #include <acpi/acpi.h> 11 #include "accommon.h" 12 #include "acinterp.h" 13 14 #define _COMPONENT ACPI_EXECUTER 15 ACPI_MODULE_NAME("exregion") 16 17 /******************************************************************************* 18 * 19 * FUNCTION: acpi_ex_system_memory_space_handler 20 * 21 * PARAMETERS: function - Read or Write operation 22 * address - Where in the space to read or write 23 * bit_width - Field width in bits (8, 16, or 32) 24 * value - Pointer to in or out value 25 * handler_context - Pointer to Handler's context 26 * region_context - Pointer to context specific to the 27 * accessed region 28 * 29 * RETURN: Status 30 * 31 * DESCRIPTION: Handler for the System Memory address space (Op Region) 32 * 33 ******************************************************************************/ 34 acpi_status 35 acpi_ex_system_memory_space_handler(u32 function, 36 acpi_physical_address address, 37 u32 bit_width, 38 u64 *value, 39 void *handler_context, void *region_context) 40 { 41 acpi_status status = AE_OK; 42 void *logical_addr_ptr = NULL; 43 struct acpi_mem_space_context *mem_info = region_context; 44 u32 length; 45 acpi_size map_length; 46 acpi_size page_boundary_map_length; 47 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED 48 u32 remainder; 49 #endif 50 51 ACPI_FUNCTION_TRACE(ex_system_memory_space_handler); 52 53 /* Validate and translate the bit width */ 54 55 switch (bit_width) { 56 case 8: 57 58 length = 1; 59 break; 60 61 case 16: 62 63 length = 2; 64 break; 65 66 case 32: 67 68 length = 4; 69 break; 70 71 case 64: 72 73 length = 8; 74 break; 75 76 default: 77 78 ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %u", 79 bit_width)); 80 return_ACPI_STATUS(AE_AML_OPERAND_VALUE); 81 } 82 83 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED 84 /* 85 * Hardware does not support non-aligned data transfers, we must verify 86 * the request. 87 */ 88 (void)acpi_ut_short_divide((u64) address, length, NULL, &remainder); 89 if (remainder != 0) { 90 return_ACPI_STATUS(AE_AML_ALIGNMENT); 91 } 92 #endif 93 94 /* 95 * Does the request fit into the cached memory mapping? 96 * Is 1) Address below the current mapping? OR 97 * 2) Address beyond the current mapping? 98 */ 99 if ((address < mem_info->mapped_physical_address) || 100 (((u64) address + length) > ((u64) 101 mem_info->mapped_physical_address + 102 mem_info->mapped_length))) { 103 /* 104 * The request cannot be resolved by the current memory mapping; 105 * Delete the existing mapping and create a new one. 106 */ 107 if (mem_info->mapped_length) { 108 109 /* Valid mapping, delete it */ 110 111 acpi_os_unmap_memory(mem_info->mapped_logical_address, 112 mem_info->mapped_length); 113 } 114 115 /* 116 * October 2009: Attempt to map from the requested address to the 117 * end of the region. However, we will never map more than one 118 * page, nor will we cross a page boundary. 119 */ 120 map_length = (acpi_size) 121 ((mem_info->address + mem_info->length) - address); 122 123 /* 124 * If mapping the entire remaining portion of the region will cross 125 * a page boundary, just map up to the page boundary, do not cross. 126 * On some systems, crossing a page boundary while mapping regions 127 * can cause warnings if the pages have different attributes 128 * due to resource management. 129 * 130 * This has the added benefit of constraining a single mapping to 131 * one page, which is similar to the original code that used a 4k 132 * maximum window. 133 */ 134 page_boundary_map_length = (acpi_size) 135 (ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address); 136 if (page_boundary_map_length == 0) { 137 page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE; 138 } 139 140 if (map_length > page_boundary_map_length) { 141 map_length = page_boundary_map_length; 142 } 143 144 /* Create a new mapping starting at the address given */ 145 146 mem_info->mapped_logical_address = 147 acpi_os_map_memory(address, map_length); 148 if (!mem_info->mapped_logical_address) { 149 ACPI_ERROR((AE_INFO, 150 "Could not map memory at 0x%8.8X%8.8X, size %u", 151 ACPI_FORMAT_UINT64(address), 152 (u32)map_length)); 153 mem_info->mapped_length = 0; 154 return_ACPI_STATUS(AE_NO_MEMORY); 155 } 156 157 /* Save the physical address and mapping size */ 158 159 mem_info->mapped_physical_address = address; 160 mem_info->mapped_length = map_length; 161 } 162 163 /* 164 * Generate a logical pointer corresponding to the address we want to 165 * access 166 */ 167 logical_addr_ptr = mem_info->mapped_logical_address + 168 ((u64) address - (u64) mem_info->mapped_physical_address); 169 170 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 171 "System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n", 172 bit_width, function, ACPI_FORMAT_UINT64(address))); 173 174 /* 175 * Perform the memory read or write 176 * 177 * Note: For machines that do not support non-aligned transfers, the target 178 * address was checked for alignment above. We do not attempt to break the 179 * transfer up into smaller (byte-size) chunks because the AML specifically 180 * asked for a transfer width that the hardware may require. 181 */ 182 switch (function) { 183 case ACPI_READ: 184 185 *value = 0; 186 switch (bit_width) { 187 case 8: 188 189 *value = (u64)ACPI_GET8(logical_addr_ptr); 190 break; 191 192 case 16: 193 194 *value = (u64)ACPI_GET16(logical_addr_ptr); 195 break; 196 197 case 32: 198 199 *value = (u64)ACPI_GET32(logical_addr_ptr); 200 break; 201 202 case 64: 203 204 *value = (u64)ACPI_GET64(logical_addr_ptr); 205 break; 206 207 default: 208 209 /* bit_width was already validated */ 210 211 break; 212 } 213 break; 214 215 case ACPI_WRITE: 216 217 switch (bit_width) { 218 case 8: 219 220 ACPI_SET8(logical_addr_ptr, *value); 221 break; 222 223 case 16: 224 225 ACPI_SET16(logical_addr_ptr, *value); 226 break; 227 228 case 32: 229 230 ACPI_SET32(logical_addr_ptr, *value); 231 break; 232 233 case 64: 234 235 ACPI_SET64(logical_addr_ptr, *value); 236 break; 237 238 default: 239 240 /* bit_width was already validated */ 241 242 break; 243 } 244 break; 245 246 default: 247 248 status = AE_BAD_PARAMETER; 249 break; 250 } 251 252 return_ACPI_STATUS(status); 253 } 254 255 /******************************************************************************* 256 * 257 * FUNCTION: acpi_ex_system_io_space_handler 258 * 259 * PARAMETERS: function - Read or Write operation 260 * address - Where in the space to read or write 261 * bit_width - Field width in bits (8, 16, or 32) 262 * value - Pointer to in or out value 263 * handler_context - Pointer to Handler's context 264 * region_context - Pointer to context specific to the 265 * accessed region 266 * 267 * RETURN: Status 268 * 269 * DESCRIPTION: Handler for the System IO address space (Op Region) 270 * 271 ******************************************************************************/ 272 273 acpi_status 274 acpi_ex_system_io_space_handler(u32 function, 275 acpi_physical_address address, 276 u32 bit_width, 277 u64 *value, 278 void *handler_context, void *region_context) 279 { 280 acpi_status status = AE_OK; 281 u32 value32; 282 283 ACPI_FUNCTION_TRACE(ex_system_io_space_handler); 284 285 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 286 "System-IO (width %u) R/W %u Address=%8.8X%8.8X\n", 287 bit_width, function, ACPI_FORMAT_UINT64(address))); 288 289 /* Decode the function parameter */ 290 291 switch (function) { 292 case ACPI_READ: 293 294 status = acpi_hw_read_port((acpi_io_address)address, 295 &value32, bit_width); 296 *value = value32; 297 break; 298 299 case ACPI_WRITE: 300 301 status = acpi_hw_write_port((acpi_io_address)address, 302 (u32)*value, bit_width); 303 break; 304 305 default: 306 307 status = AE_BAD_PARAMETER; 308 break; 309 } 310 311 return_ACPI_STATUS(status); 312 } 313 314 #ifdef ACPI_PCI_CONFIGURED 315 /******************************************************************************* 316 * 317 * FUNCTION: acpi_ex_pci_config_space_handler 318 * 319 * PARAMETERS: function - Read or Write operation 320 * address - Where in the space to read or write 321 * bit_width - Field width in bits (8, 16, or 32) 322 * value - Pointer to in or out value 323 * handler_context - Pointer to Handler's context 324 * region_context - Pointer to context specific to the 325 * accessed region 326 * 327 * RETURN: Status 328 * 329 * DESCRIPTION: Handler for the PCI Config address space (Op Region) 330 * 331 ******************************************************************************/ 332 333 acpi_status 334 acpi_ex_pci_config_space_handler(u32 function, 335 acpi_physical_address address, 336 u32 bit_width, 337 u64 *value, 338 void *handler_context, void *region_context) 339 { 340 acpi_status status = AE_OK; 341 struct acpi_pci_id *pci_id; 342 u16 pci_register; 343 344 ACPI_FUNCTION_TRACE(ex_pci_config_space_handler); 345 346 /* 347 * The arguments to acpi_os(Read|Write)pci_configuration are: 348 * 349 * pci_segment is the PCI bus segment range 0-31 350 * pci_bus is the PCI bus number range 0-255 351 * pci_device is the PCI device number range 0-31 352 * pci_function is the PCI device function number 353 * pci_register is the Config space register range 0-255 bytes 354 * 355 * value - input value for write, output address for read 356 * 357 */ 358 pci_id = (struct acpi_pci_id *)region_context; 359 pci_register = (u16) (u32) address; 360 361 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 362 "Pci-Config %u (%u) Seg(%04x) Bus(%04x) " 363 "Dev(%04x) Func(%04x) Reg(%04x)\n", 364 function, bit_width, pci_id->segment, pci_id->bus, 365 pci_id->device, pci_id->function, pci_register)); 366 367 switch (function) { 368 case ACPI_READ: 369 370 *value = 0; 371 status = 372 acpi_os_read_pci_configuration(pci_id, pci_register, value, 373 bit_width); 374 break; 375 376 case ACPI_WRITE: 377 378 status = 379 acpi_os_write_pci_configuration(pci_id, pci_register, 380 *value, bit_width); 381 break; 382 383 default: 384 385 status = AE_BAD_PARAMETER; 386 break; 387 } 388 389 return_ACPI_STATUS(status); 390 } 391 #endif 392 393 /******************************************************************************* 394 * 395 * FUNCTION: acpi_ex_cmos_space_handler 396 * 397 * PARAMETERS: function - Read or Write operation 398 * address - Where in the space to read or write 399 * bit_width - Field width in bits (8, 16, or 32) 400 * value - Pointer to in or out value 401 * handler_context - Pointer to Handler's context 402 * region_context - Pointer to context specific to the 403 * accessed region 404 * 405 * RETURN: Status 406 * 407 * DESCRIPTION: Handler for the CMOS address space (Op Region) 408 * 409 ******************************************************************************/ 410 411 acpi_status 412 acpi_ex_cmos_space_handler(u32 function, 413 acpi_physical_address address, 414 u32 bit_width, 415 u64 *value, 416 void *handler_context, void *region_context) 417 { 418 acpi_status status = AE_OK; 419 420 ACPI_FUNCTION_TRACE(ex_cmos_space_handler); 421 422 return_ACPI_STATUS(status); 423 } 424 425 #ifdef ACPI_PCI_CONFIGURED 426 /******************************************************************************* 427 * 428 * FUNCTION: acpi_ex_pci_bar_space_handler 429 * 430 * PARAMETERS: function - Read or Write operation 431 * address - Where in the space to read or write 432 * bit_width - Field width in bits (8, 16, or 32) 433 * value - Pointer to in or out value 434 * handler_context - Pointer to Handler's context 435 * region_context - Pointer to context specific to the 436 * accessed region 437 * 438 * RETURN: Status 439 * 440 * DESCRIPTION: Handler for the PCI bar_target address space (Op Region) 441 * 442 ******************************************************************************/ 443 444 acpi_status 445 acpi_ex_pci_bar_space_handler(u32 function, 446 acpi_physical_address address, 447 u32 bit_width, 448 u64 *value, 449 void *handler_context, void *region_context) 450 { 451 acpi_status status = AE_OK; 452 453 ACPI_FUNCTION_TRACE(ex_pci_bar_space_handler); 454 455 return_ACPI_STATUS(status); 456 } 457 #endif 458 459 /******************************************************************************* 460 * 461 * FUNCTION: acpi_ex_data_table_space_handler 462 * 463 * PARAMETERS: function - Read or Write operation 464 * address - Where in the space to read or write 465 * bit_width - Field width in bits (8, 16, or 32) 466 * value - Pointer to in or out value 467 * handler_context - Pointer to Handler's context 468 * region_context - Pointer to context specific to the 469 * accessed region 470 * 471 * RETURN: Status 472 * 473 * DESCRIPTION: Handler for the Data Table address space (Op Region) 474 * 475 ******************************************************************************/ 476 477 acpi_status 478 acpi_ex_data_table_space_handler(u32 function, 479 acpi_physical_address address, 480 u32 bit_width, 481 u64 *value, 482 void *handler_context, void *region_context) 483 { 484 ACPI_FUNCTION_TRACE(ex_data_table_space_handler); 485 486 /* 487 * Perform the memory read or write. The bit_width was already 488 * validated. 489 */ 490 switch (function) { 491 case ACPI_READ: 492 493 memcpy(ACPI_CAST_PTR(char, value), 494 ACPI_PHYSADDR_TO_PTR(address), ACPI_DIV_8(bit_width)); 495 break; 496 497 case ACPI_WRITE: 498 499 memcpy(ACPI_PHYSADDR_TO_PTR(address), 500 ACPI_CAST_PTR(char, value), ACPI_DIV_8(bit_width)); 501 break; 502 503 default: 504 505 return_ACPI_STATUS(AE_BAD_PARAMETER); 506 } 507 508 return_ACPI_STATUS(AE_OK); 509 } 510