1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 2 /****************************************************************************** 3 * 4 * Module Name: exregion - ACPI default op_region (address space) handlers 5 * 6 * Copyright (C) 2000 - 2022, Intel Corp. 7 * 8 *****************************************************************************/ 9 10 #include <acpi/acpi.h> 11 #include "accommon.h" 12 #include "acinterp.h" 13 14 #define _COMPONENT ACPI_EXECUTER 15 ACPI_MODULE_NAME("exregion") 16 17 /******************************************************************************* 18 * 19 * FUNCTION: acpi_ex_system_memory_space_handler 20 * 21 * PARAMETERS: function - Read or Write operation 22 * address - Where in the space to read or write 23 * bit_width - Field width in bits (8, 16, or 32) 24 * value - Pointer to in or out value 25 * handler_context - Pointer to Handler's context 26 * region_context - Pointer to context specific to the 27 * accessed region 28 * 29 * RETURN: Status 30 * 31 * DESCRIPTION: Handler for the System Memory address space (Op Region) 32 * 33 ******************************************************************************/ 34 acpi_status 35 acpi_ex_system_memory_space_handler(u32 function, 36 acpi_physical_address address, 37 u32 bit_width, 38 u64 *value, 39 void *handler_context, void *region_context) 40 { 41 acpi_status status = AE_OK; 42 void *logical_addr_ptr = NULL; 43 struct acpi_mem_space_context *mem_info = region_context; 44 struct acpi_mem_mapping *mm = mem_info->cur_mm; 45 u32 length; 46 acpi_size map_length; 47 acpi_size page_boundary_map_length; 48 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED 49 u32 remainder; 50 #endif 51 52 ACPI_FUNCTION_TRACE(ex_system_memory_space_handler); 53 54 /* Validate and translate the bit width */ 55 56 switch (bit_width) { 57 case 8: 58 59 length = 1; 60 break; 61 62 case 16: 63 64 length = 2; 65 break; 66 67 case 32: 68 69 length = 4; 70 break; 71 72 case 64: 73 74 length = 8; 75 break; 76 77 default: 78 79 ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %u", 80 bit_width)); 81 return_ACPI_STATUS(AE_AML_OPERAND_VALUE); 82 } 83 84 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED 85 /* 86 * Hardware does not support non-aligned data transfers, we must verify 87 * the request. 88 */ 89 (void)acpi_ut_short_divide((u64) address, length, NULL, &remainder); 90 if (remainder != 0) { 91 return_ACPI_STATUS(AE_AML_ALIGNMENT); 92 } 93 #endif 94 95 /* 96 * Does the request fit into the cached memory mapping? 97 * Is 1) Address below the current mapping? OR 98 * 2) Address beyond the current mapping? 99 */ 100 if (!mm || (address < mm->physical_address) || 101 ((u64) address + length > (u64) mm->physical_address + mm->length)) { 102 /* 103 * The request cannot be resolved by the current memory mapping. 104 * 105 * Look for an existing saved mapping covering the address range 106 * at hand. If found, save it as the current one and carry out 107 * the access. 108 */ 109 for (mm = mem_info->first_mm; mm; mm = mm->next_mm) { 110 if (mm == mem_info->cur_mm) 111 continue; 112 113 if (address < mm->physical_address) 114 continue; 115 116 if ((u64) address + length > 117 (u64) mm->physical_address + mm->length) 118 continue; 119 120 mem_info->cur_mm = mm; 121 goto access; 122 } 123 124 /* Create a new mappings list entry */ 125 mm = ACPI_ALLOCATE_ZEROED(sizeof(*mm)); 126 if (!mm) { 127 ACPI_ERROR((AE_INFO, 128 "Unable to save memory mapping at 0x%8.8X%8.8X, size %u", 129 ACPI_FORMAT_UINT64(address), length)); 130 return_ACPI_STATUS(AE_NO_MEMORY); 131 } 132 133 /* 134 * October 2009: Attempt to map from the requested address to the 135 * end of the region. However, we will never map more than one 136 * page, nor will we cross a page boundary. 137 */ 138 map_length = (acpi_size) 139 ((mem_info->address + mem_info->length) - address); 140 141 /* 142 * If mapping the entire remaining portion of the region will cross 143 * a page boundary, just map up to the page boundary, do not cross. 144 * On some systems, crossing a page boundary while mapping regions 145 * can cause warnings if the pages have different attributes 146 * due to resource management. 147 * 148 * This has the added benefit of constraining a single mapping to 149 * one page, which is similar to the original code that used a 4k 150 * maximum window. 151 */ 152 page_boundary_map_length = (acpi_size) 153 (ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address); 154 if (page_boundary_map_length == 0) { 155 page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE; 156 } 157 158 if (map_length > page_boundary_map_length) { 159 map_length = page_boundary_map_length; 160 } 161 162 /* Create a new mapping starting at the address given */ 163 164 logical_addr_ptr = acpi_os_map_memory(address, map_length); 165 if (!logical_addr_ptr) { 166 ACPI_ERROR((AE_INFO, 167 "Could not map memory at 0x%8.8X%8.8X, size %u", 168 ACPI_FORMAT_UINT64(address), 169 (u32)map_length)); 170 ACPI_FREE(mm); 171 return_ACPI_STATUS(AE_NO_MEMORY); 172 } 173 174 /* Save the physical address and mapping size */ 175 176 mm->logical_address = logical_addr_ptr; 177 mm->physical_address = address; 178 mm->length = map_length; 179 180 /* 181 * Add the new entry to the mappigs list and save it as the 182 * current mapping. 183 */ 184 mm->next_mm = mem_info->first_mm; 185 mem_info->first_mm = mm; 186 187 mem_info->cur_mm = mm; 188 } 189 190 access: 191 /* 192 * Generate a logical pointer corresponding to the address we want to 193 * access 194 */ 195 logical_addr_ptr = mm->logical_address + 196 ((u64) address - (u64) mm->physical_address); 197 198 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 199 "System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n", 200 bit_width, function, ACPI_FORMAT_UINT64(address))); 201 202 /* 203 * Perform the memory read or write 204 * 205 * Note: For machines that do not support non-aligned transfers, the target 206 * address was checked for alignment above. We do not attempt to break the 207 * transfer up into smaller (byte-size) chunks because the AML specifically 208 * asked for a transfer width that the hardware may require. 209 */ 210 switch (function) { 211 case ACPI_READ: 212 213 *value = 0; 214 switch (bit_width) { 215 case 8: 216 217 *value = (u64)ACPI_GET8(logical_addr_ptr); 218 break; 219 220 case 16: 221 222 *value = (u64)ACPI_GET16(logical_addr_ptr); 223 break; 224 225 case 32: 226 227 *value = (u64)ACPI_GET32(logical_addr_ptr); 228 break; 229 230 case 64: 231 232 *value = (u64)ACPI_GET64(logical_addr_ptr); 233 break; 234 235 default: 236 237 /* bit_width was already validated */ 238 239 break; 240 } 241 break; 242 243 case ACPI_WRITE: 244 245 switch (bit_width) { 246 case 8: 247 248 ACPI_SET8(logical_addr_ptr, *value); 249 break; 250 251 case 16: 252 253 ACPI_SET16(logical_addr_ptr, *value); 254 break; 255 256 case 32: 257 258 ACPI_SET32(logical_addr_ptr, *value); 259 break; 260 261 case 64: 262 263 ACPI_SET64(logical_addr_ptr, *value); 264 break; 265 266 default: 267 268 /* bit_width was already validated */ 269 270 break; 271 } 272 break; 273 274 default: 275 276 status = AE_BAD_PARAMETER; 277 break; 278 } 279 280 return_ACPI_STATUS(status); 281 } 282 283 /******************************************************************************* 284 * 285 * FUNCTION: acpi_ex_system_io_space_handler 286 * 287 * PARAMETERS: function - Read or Write operation 288 * address - Where in the space to read or write 289 * bit_width - Field width in bits (8, 16, or 32) 290 * value - Pointer to in or out value 291 * handler_context - Pointer to Handler's context 292 * region_context - Pointer to context specific to the 293 * accessed region 294 * 295 * RETURN: Status 296 * 297 * DESCRIPTION: Handler for the System IO address space (Op Region) 298 * 299 ******************************************************************************/ 300 301 acpi_status 302 acpi_ex_system_io_space_handler(u32 function, 303 acpi_physical_address address, 304 u32 bit_width, 305 u64 *value, 306 void *handler_context, void *region_context) 307 { 308 acpi_status status = AE_OK; 309 u32 value32; 310 311 ACPI_FUNCTION_TRACE(ex_system_io_space_handler); 312 313 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 314 "System-IO (width %u) R/W %u Address=%8.8X%8.8X\n", 315 bit_width, function, ACPI_FORMAT_UINT64(address))); 316 317 /* Decode the function parameter */ 318 319 switch (function) { 320 case ACPI_READ: 321 322 status = acpi_hw_read_port((acpi_io_address)address, 323 &value32, bit_width); 324 *value = value32; 325 break; 326 327 case ACPI_WRITE: 328 329 status = acpi_hw_write_port((acpi_io_address)address, 330 (u32)*value, bit_width); 331 break; 332 333 default: 334 335 status = AE_BAD_PARAMETER; 336 break; 337 } 338 339 return_ACPI_STATUS(status); 340 } 341 342 #ifdef ACPI_PCI_CONFIGURED 343 /******************************************************************************* 344 * 345 * FUNCTION: acpi_ex_pci_config_space_handler 346 * 347 * PARAMETERS: function - Read or Write operation 348 * address - Where in the space to read or write 349 * bit_width - Field width in bits (8, 16, or 32) 350 * value - Pointer to in or out value 351 * handler_context - Pointer to Handler's context 352 * region_context - Pointer to context specific to the 353 * accessed region 354 * 355 * RETURN: Status 356 * 357 * DESCRIPTION: Handler for the PCI Config address space (Op Region) 358 * 359 ******************************************************************************/ 360 361 acpi_status 362 acpi_ex_pci_config_space_handler(u32 function, 363 acpi_physical_address address, 364 u32 bit_width, 365 u64 *value, 366 void *handler_context, void *region_context) 367 { 368 acpi_status status = AE_OK; 369 struct acpi_pci_id *pci_id; 370 u16 pci_register; 371 372 ACPI_FUNCTION_TRACE(ex_pci_config_space_handler); 373 374 /* 375 * The arguments to acpi_os(Read|Write)pci_configuration are: 376 * 377 * pci_segment is the PCI bus segment range 0-31 378 * pci_bus is the PCI bus number range 0-255 379 * pci_device is the PCI device number range 0-31 380 * pci_function is the PCI device function number 381 * pci_register is the Config space register range 0-255 bytes 382 * 383 * value - input value for write, output address for read 384 * 385 */ 386 pci_id = (struct acpi_pci_id *)region_context; 387 pci_register = (u16) (u32) address; 388 389 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 390 "Pci-Config %u (%u) Seg(%04x) Bus(%04x) " 391 "Dev(%04x) Func(%04x) Reg(%04x)\n", 392 function, bit_width, pci_id->segment, pci_id->bus, 393 pci_id->device, pci_id->function, pci_register)); 394 395 switch (function) { 396 case ACPI_READ: 397 398 *value = 0; 399 status = 400 acpi_os_read_pci_configuration(pci_id, pci_register, value, 401 bit_width); 402 break; 403 404 case ACPI_WRITE: 405 406 status = 407 acpi_os_write_pci_configuration(pci_id, pci_register, 408 *value, bit_width); 409 break; 410 411 default: 412 413 status = AE_BAD_PARAMETER; 414 break; 415 } 416 417 return_ACPI_STATUS(status); 418 } 419 #endif 420 421 /******************************************************************************* 422 * 423 * FUNCTION: acpi_ex_cmos_space_handler 424 * 425 * PARAMETERS: function - Read or Write operation 426 * address - Where in the space to read or write 427 * bit_width - Field width in bits (8, 16, or 32) 428 * value - Pointer to in or out value 429 * handler_context - Pointer to Handler's context 430 * region_context - Pointer to context specific to the 431 * accessed region 432 * 433 * RETURN: Status 434 * 435 * DESCRIPTION: Handler for the CMOS address space (Op Region) 436 * 437 ******************************************************************************/ 438 439 acpi_status 440 acpi_ex_cmos_space_handler(u32 function, 441 acpi_physical_address address, 442 u32 bit_width, 443 u64 *value, 444 void *handler_context, void *region_context) 445 { 446 acpi_status status = AE_OK; 447 448 ACPI_FUNCTION_TRACE(ex_cmos_space_handler); 449 450 return_ACPI_STATUS(status); 451 } 452 453 #ifdef ACPI_PCI_CONFIGURED 454 /******************************************************************************* 455 * 456 * FUNCTION: acpi_ex_pci_bar_space_handler 457 * 458 * PARAMETERS: function - Read or Write operation 459 * address - Where in the space to read or write 460 * bit_width - Field width in bits (8, 16, or 32) 461 * value - Pointer to in or out value 462 * handler_context - Pointer to Handler's context 463 * region_context - Pointer to context specific to the 464 * accessed region 465 * 466 * RETURN: Status 467 * 468 * DESCRIPTION: Handler for the PCI bar_target address space (Op Region) 469 * 470 ******************************************************************************/ 471 472 acpi_status 473 acpi_ex_pci_bar_space_handler(u32 function, 474 acpi_physical_address address, 475 u32 bit_width, 476 u64 *value, 477 void *handler_context, void *region_context) 478 { 479 acpi_status status = AE_OK; 480 481 ACPI_FUNCTION_TRACE(ex_pci_bar_space_handler); 482 483 return_ACPI_STATUS(status); 484 } 485 #endif 486 487 /******************************************************************************* 488 * 489 * FUNCTION: acpi_ex_data_table_space_handler 490 * 491 * PARAMETERS: function - Read or Write operation 492 * address - Where in the space to read or write 493 * bit_width - Field width in bits (8, 16, or 32) 494 * value - Pointer to in or out value 495 * handler_context - Pointer to Handler's context 496 * region_context - Pointer to context specific to the 497 * accessed region 498 * 499 * RETURN: Status 500 * 501 * DESCRIPTION: Handler for the Data Table address space (Op Region) 502 * 503 ******************************************************************************/ 504 505 acpi_status 506 acpi_ex_data_table_space_handler(u32 function, 507 acpi_physical_address address, 508 u32 bit_width, 509 u64 *value, 510 void *handler_context, void *region_context) 511 { 512 struct acpi_data_table_space_context *mapping; 513 char *pointer; 514 515 ACPI_FUNCTION_TRACE(ex_data_table_space_handler); 516 517 mapping = (struct acpi_data_table_space_context *) region_context; 518 pointer = ACPI_CAST_PTR(char, mapping->pointer) + 519 (address - ACPI_PTR_TO_PHYSADDR(mapping->pointer)); 520 521 /* 522 * Perform the memory read or write. The bit_width was already 523 * validated. 524 */ 525 switch (function) { 526 case ACPI_READ: 527 528 memcpy(ACPI_CAST_PTR(char, value), pointer, 529 ACPI_DIV_8(bit_width)); 530 break; 531 532 case ACPI_WRITE: 533 534 memcpy(pointer, ACPI_CAST_PTR(char, value), 535 ACPI_DIV_8(bit_width)); 536 break; 537 538 default: 539 540 return_ACPI_STATUS(AE_BAD_PARAMETER); 541 } 542 543 return_ACPI_STATUS(AE_OK); 544 } 545