1 /****************************************************************************** 2 * 3 * Module Name: exoparg6 - AML execution - opcodes with 6 arguments 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acinterp.h" 47 #include "acparser.h" 48 #include "amlcode.h" 49 50 #define _COMPONENT ACPI_EXECUTER 51 ACPI_MODULE_NAME("exoparg6") 52 53 /*! 54 * Naming convention for AML interpreter execution routines. 55 * 56 * The routines that begin execution of AML opcodes are named with a common 57 * convention based upon the number of arguments, the number of target operands, 58 * and whether or not a value is returned: 59 * 60 * AcpiExOpcode_xA_yT_zR 61 * 62 * Where: 63 * 64 * xA - ARGUMENTS: The number of arguments (input operands) that are 65 * required for this opcode type (1 through 6 args). 66 * yT - TARGETS: The number of targets (output operands) that are required 67 * for this opcode type (0, 1, or 2 targets). 68 * zR - RETURN VALUE: Indicates whether this opcode type returns a value 69 * as the function return (0 or 1). 70 * 71 * The AcpiExOpcode* functions are called via the Dispatcher component with 72 * fully resolved operands. 73 !*/ 74 /* Local prototypes */ 75 static u8 76 acpi_ex_do_match(u32 match_op, 77 union acpi_operand_object *package_obj, 78 union acpi_operand_object *match_obj); 79 80 /******************************************************************************* 81 * 82 * FUNCTION: acpi_ex_do_match 83 * 84 * PARAMETERS: match_op - The AML match operand 85 * package_obj - Object from the target package 86 * match_obj - Object to be matched 87 * 88 * RETURN: TRUE if the match is successful, FALSE otherwise 89 * 90 * DESCRIPTION: Implements the low-level match for the ASL Match operator. 91 * Package elements will be implicitly converted to the type of 92 * the match object (Integer/Buffer/String). 93 * 94 ******************************************************************************/ 95 96 static u8 97 acpi_ex_do_match(u32 match_op, 98 union acpi_operand_object *package_obj, 99 union acpi_operand_object *match_obj) 100 { 101 u8 logical_result = TRUE; 102 acpi_status status; 103 104 /* 105 * Note: Since the package_obj/match_obj ordering is opposite to that of 106 * the standard logical operators, we have to reverse them when we call 107 * do_logical_op in order to make the implicit conversion rules work 108 * correctly. However, this means we have to flip the entire equation 109 * also. A bit ugly perhaps, but overall, better than fussing the 110 * parameters around at runtime, over and over again. 111 * 112 * Below, P[i] refers to the package element, M refers to the Match object. 113 */ 114 switch (match_op) { 115 case MATCH_MTR: 116 117 /* Always true */ 118 119 break; 120 121 case MATCH_MEQ: 122 /* 123 * True if equal: (P[i] == M) 124 * Change to: (M == P[i]) 125 */ 126 status = 127 acpi_ex_do_logical_op(AML_LEQUAL_OP, match_obj, package_obj, 128 &logical_result); 129 if (ACPI_FAILURE(status)) { 130 return (FALSE); 131 } 132 break; 133 134 case MATCH_MLE: 135 /* 136 * True if less than or equal: (P[i] <= M) (P[i] not_greater than M) 137 * Change to: (M >= P[i]) (M not_less than P[i]) 138 */ 139 status = 140 acpi_ex_do_logical_op(AML_LLESS_OP, match_obj, package_obj, 141 &logical_result); 142 if (ACPI_FAILURE(status)) { 143 return (FALSE); 144 } 145 logical_result = (u8) ! logical_result; 146 break; 147 148 case MATCH_MLT: 149 /* 150 * True if less than: (P[i] < M) 151 * Change to: (M > P[i]) 152 */ 153 status = 154 acpi_ex_do_logical_op(AML_LGREATER_OP, match_obj, 155 package_obj, &logical_result); 156 if (ACPI_FAILURE(status)) { 157 return (FALSE); 158 } 159 break; 160 161 case MATCH_MGE: 162 /* 163 * True if greater than or equal: (P[i] >= M) (P[i] not_less than M) 164 * Change to: (M <= P[i]) (M not_greater than P[i]) 165 */ 166 status = 167 acpi_ex_do_logical_op(AML_LGREATER_OP, match_obj, 168 package_obj, &logical_result); 169 if (ACPI_FAILURE(status)) { 170 return (FALSE); 171 } 172 logical_result = (u8) ! logical_result; 173 break; 174 175 case MATCH_MGT: 176 /* 177 * True if greater than: (P[i] > M) 178 * Change to: (M < P[i]) 179 */ 180 status = 181 acpi_ex_do_logical_op(AML_LLESS_OP, match_obj, package_obj, 182 &logical_result); 183 if (ACPI_FAILURE(status)) { 184 return (FALSE); 185 } 186 break; 187 188 default: 189 190 /* Undefined */ 191 192 return (FALSE); 193 } 194 195 return (logical_result); 196 } 197 198 /******************************************************************************* 199 * 200 * FUNCTION: acpi_ex_opcode_6A_0T_1R 201 * 202 * PARAMETERS: walk_state - Current walk state 203 * 204 * RETURN: Status 205 * 206 * DESCRIPTION: Execute opcode with 6 arguments, no target, and a return value 207 * 208 ******************************************************************************/ 209 210 acpi_status acpi_ex_opcode_6A_0T_1R(struct acpi_walk_state * walk_state) 211 { 212 union acpi_operand_object **operand = &walk_state->operands[0]; 213 union acpi_operand_object *return_desc = NULL; 214 acpi_status status = AE_OK; 215 u64 index; 216 union acpi_operand_object *this_element; 217 218 ACPI_FUNCTION_TRACE_STR(ex_opcode_6A_0T_1R, 219 acpi_ps_get_opcode_name(walk_state->opcode)); 220 221 switch (walk_state->opcode) { 222 case AML_MATCH_OP: 223 /* 224 * Match (search_pkg[0], match_op1[1], match_obj1[2], 225 * match_op2[3], match_obj2[4], start_index[5]) 226 */ 227 228 /* Validate both Match Term Operators (MTR, MEQ, etc.) */ 229 230 if ((operand[1]->integer.value > MAX_MATCH_OPERATOR) || 231 (operand[3]->integer.value > MAX_MATCH_OPERATOR)) { 232 ACPI_ERROR((AE_INFO, "Match operator out of range")); 233 status = AE_AML_OPERAND_VALUE; 234 goto cleanup; 235 } 236 237 /* Get the package start_index, validate against the package length */ 238 239 index = operand[5]->integer.value; 240 if (index >= operand[0]->package.count) { 241 ACPI_ERROR((AE_INFO, 242 "Index (0x%8.8X%8.8X) beyond package end (0x%X)", 243 ACPI_FORMAT_UINT64(index), 244 operand[0]->package.count)); 245 status = AE_AML_PACKAGE_LIMIT; 246 goto cleanup; 247 } 248 249 /* Create an integer for the return value */ 250 /* Default return value is ACPI_UINT64_MAX if no match found */ 251 252 return_desc = acpi_ut_create_integer_object(ACPI_UINT64_MAX); 253 if (!return_desc) { 254 status = AE_NO_MEMORY; 255 goto cleanup; 256 257 } 258 259 /* 260 * Examine each element until a match is found. Both match conditions 261 * must be satisfied for a match to occur. Within the loop, 262 * "continue" signifies that the current element does not match 263 * and the next should be examined. 264 * 265 * Upon finding a match, the loop will terminate via "break" at 266 * the bottom. If it terminates "normally", match_value will be 267 * ACPI_UINT64_MAX (Ones) (its initial value) indicating that no 268 * match was found. 269 */ 270 for (; index < operand[0]->package.count; index++) { 271 272 /* Get the current package element */ 273 274 this_element = operand[0]->package.elements[index]; 275 276 /* Treat any uninitialized (NULL) elements as non-matching */ 277 278 if (!this_element) { 279 continue; 280 } 281 282 /* 283 * Both match conditions must be satisfied. Execution of a continue 284 * (proceed to next iteration of enclosing for loop) signifies a 285 * non-match. 286 */ 287 if (!acpi_ex_do_match((u32) operand[1]->integer.value, 288 this_element, operand[2])) { 289 continue; 290 } 291 292 if (!acpi_ex_do_match((u32) operand[3]->integer.value, 293 this_element, operand[4])) { 294 continue; 295 } 296 297 /* Match found: Index is the return value */ 298 299 return_desc->integer.value = index; 300 break; 301 } 302 break; 303 304 case AML_LOAD_TABLE_OP: 305 306 status = acpi_ex_load_table_op(walk_state, &return_desc); 307 break; 308 309 default: 310 311 ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X", 312 walk_state->opcode)); 313 status = AE_AML_BAD_OPCODE; 314 goto cleanup; 315 } 316 317 cleanup: 318 319 /* Delete return object on error */ 320 321 if (ACPI_FAILURE(status)) { 322 acpi_ut_remove_reference(return_desc); 323 } 324 325 /* Save return object on success */ 326 327 else { 328 walk_state->result_obj = return_desc; 329 } 330 331 return_ACPI_STATUS(status); 332 } 333