1 /****************************************************************************** 2 * 3 * Module Name: exfield - ACPI AML (p-code) execution - field manipulation 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2014, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acdispat.h" 47 #include "acinterp.h" 48 49 #define _COMPONENT ACPI_EXECUTER 50 ACPI_MODULE_NAME("exfield") 51 52 /******************************************************************************* 53 * 54 * FUNCTION: acpi_ex_read_data_from_field 55 * 56 * PARAMETERS: walk_state - Current execution state 57 * obj_desc - The named field 58 * ret_buffer_desc - Where the return data object is stored 59 * 60 * RETURN: Status 61 * 62 * DESCRIPTION: Read from a named field. Returns either an Integer or a 63 * Buffer, depending on the size of the field. 64 * 65 ******************************************************************************/ 66 acpi_status 67 acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, 68 union acpi_operand_object *obj_desc, 69 union acpi_operand_object **ret_buffer_desc) 70 { 71 acpi_status status; 72 union acpi_operand_object *buffer_desc; 73 acpi_size length; 74 void *buffer; 75 u32 function; 76 77 ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc); 78 79 /* Parameter validation */ 80 81 if (!obj_desc) { 82 return_ACPI_STATUS(AE_AML_NO_OPERAND); 83 } 84 if (!ret_buffer_desc) { 85 return_ACPI_STATUS(AE_BAD_PARAMETER); 86 } 87 88 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 89 /* 90 * If the buffer_field arguments have not been previously evaluated, 91 * evaluate them now and save the results. 92 */ 93 if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { 94 status = acpi_ds_get_buffer_field_arguments(obj_desc); 95 if (ACPI_FAILURE(status)) { 96 return_ACPI_STATUS(status); 97 } 98 } 99 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 100 (obj_desc->field.region_obj->region.space_id == 101 ACPI_ADR_SPACE_SMBUS 102 || obj_desc->field.region_obj->region.space_id == 103 ACPI_ADR_SPACE_GSBUS 104 || obj_desc->field.region_obj->region.space_id == 105 ACPI_ADR_SPACE_IPMI)) { 106 /* 107 * This is an SMBus, GSBus or IPMI read. We must create a buffer to hold 108 * the data and then directly access the region handler. 109 * 110 * Note: SMBus and GSBus protocol value is passed in upper 16-bits of Function 111 */ 112 if (obj_desc->field.region_obj->region.space_id == 113 ACPI_ADR_SPACE_SMBUS) { 114 length = ACPI_SMBUS_BUFFER_SIZE; 115 function = 116 ACPI_READ | (obj_desc->field.attribute << 16); 117 } else if (obj_desc->field.region_obj->region.space_id == 118 ACPI_ADR_SPACE_GSBUS) { 119 length = ACPI_GSBUS_BUFFER_SIZE; 120 function = 121 ACPI_READ | (obj_desc->field.attribute << 16); 122 } else { /* IPMI */ 123 124 length = ACPI_IPMI_BUFFER_SIZE; 125 function = ACPI_READ; 126 } 127 128 buffer_desc = acpi_ut_create_buffer_object(length); 129 if (!buffer_desc) { 130 return_ACPI_STATUS(AE_NO_MEMORY); 131 } 132 133 /* Lock entire transaction if requested */ 134 135 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 136 137 /* Call the region handler for the read */ 138 139 status = acpi_ex_access_region(obj_desc, 0, 140 ACPI_CAST_PTR(u64, 141 buffer_desc-> 142 buffer.pointer), 143 function); 144 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 145 goto exit; 146 } 147 148 /* 149 * Allocate a buffer for the contents of the field. 150 * 151 * If the field is larger than the current integer width, create 152 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows 153 * the use of arithmetic operators on the returned value if the 154 * field size is equal or smaller than an Integer. 155 * 156 * Note: Field.length is in bits. 157 */ 158 length = 159 (acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length); 160 if (length > acpi_gbl_integer_byte_width) { 161 162 /* Field is too large for an Integer, create a Buffer instead */ 163 164 buffer_desc = acpi_ut_create_buffer_object(length); 165 if (!buffer_desc) { 166 return_ACPI_STATUS(AE_NO_MEMORY); 167 } 168 buffer = buffer_desc->buffer.pointer; 169 } else { 170 /* Field will fit within an Integer (normal case) */ 171 172 buffer_desc = acpi_ut_create_integer_object((u64) 0); 173 if (!buffer_desc) { 174 return_ACPI_STATUS(AE_NO_MEMORY); 175 } 176 177 length = acpi_gbl_integer_byte_width; 178 buffer = &buffer_desc->integer.value; 179 } 180 181 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 182 "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", 183 obj_desc, obj_desc->common.type, buffer, 184 (u32) length)); 185 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 186 "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", 187 obj_desc->common_field.bit_length, 188 obj_desc->common_field.start_field_bit_offset, 189 obj_desc->common_field.base_byte_offset)); 190 191 /* Lock entire transaction if requested */ 192 193 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 194 195 /* Read from the field */ 196 197 status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length); 198 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 199 200 exit: 201 if (ACPI_FAILURE(status)) { 202 acpi_ut_remove_reference(buffer_desc); 203 } else { 204 *ret_buffer_desc = buffer_desc; 205 } 206 207 return_ACPI_STATUS(status); 208 } 209 210 /******************************************************************************* 211 * 212 * FUNCTION: acpi_ex_write_data_to_field 213 * 214 * PARAMETERS: source_desc - Contains data to write 215 * obj_desc - The named field 216 * result_desc - Where the return value is returned, if any 217 * 218 * RETURN: Status 219 * 220 * DESCRIPTION: Write to a named field 221 * 222 ******************************************************************************/ 223 224 acpi_status 225 acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, 226 union acpi_operand_object *obj_desc, 227 union acpi_operand_object **result_desc) 228 { 229 acpi_status status; 230 u32 length; 231 void *buffer; 232 union acpi_operand_object *buffer_desc; 233 u32 function; 234 235 ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc); 236 237 /* Parameter validation */ 238 239 if (!source_desc || !obj_desc) { 240 return_ACPI_STATUS(AE_AML_NO_OPERAND); 241 } 242 243 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 244 /* 245 * If the buffer_field arguments have not been previously evaluated, 246 * evaluate them now and save the results. 247 */ 248 if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { 249 status = acpi_ds_get_buffer_field_arguments(obj_desc); 250 if (ACPI_FAILURE(status)) { 251 return_ACPI_STATUS(status); 252 } 253 } 254 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 255 (obj_desc->field.region_obj->region.space_id == 256 ACPI_ADR_SPACE_SMBUS 257 || obj_desc->field.region_obj->region.space_id == 258 ACPI_ADR_SPACE_GSBUS 259 || obj_desc->field.region_obj->region.space_id == 260 ACPI_ADR_SPACE_IPMI)) { 261 /* 262 * This is an SMBus, GSBus or IPMI write. We will bypass the entire field 263 * mechanism and handoff the buffer directly to the handler. For 264 * these address spaces, the buffer is bi-directional; on a write, 265 * return data is returned in the same buffer. 266 * 267 * Source must be a buffer of sufficient size: 268 * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE. 269 * 270 * Note: SMBus and GSBus protocol type is passed in upper 16-bits of Function 271 */ 272 if (source_desc->common.type != ACPI_TYPE_BUFFER) { 273 ACPI_ERROR((AE_INFO, 274 "SMBus/IPMI/GenericSerialBus write requires Buffer, found type %s", 275 acpi_ut_get_object_type_name(source_desc))); 276 277 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 278 } 279 280 if (obj_desc->field.region_obj->region.space_id == 281 ACPI_ADR_SPACE_SMBUS) { 282 length = ACPI_SMBUS_BUFFER_SIZE; 283 function = 284 ACPI_WRITE | (obj_desc->field.attribute << 16); 285 } else if (obj_desc->field.region_obj->region.space_id == 286 ACPI_ADR_SPACE_GSBUS) { 287 length = ACPI_GSBUS_BUFFER_SIZE; 288 function = 289 ACPI_WRITE | (obj_desc->field.attribute << 16); 290 } else { /* IPMI */ 291 292 length = ACPI_IPMI_BUFFER_SIZE; 293 function = ACPI_WRITE; 294 } 295 296 if (source_desc->buffer.length < length) { 297 ACPI_ERROR((AE_INFO, 298 "SMBus/IPMI/GenericSerialBus write requires Buffer of length %u, found length %u", 299 length, source_desc->buffer.length)); 300 301 return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); 302 } 303 304 /* Create the bi-directional buffer */ 305 306 buffer_desc = acpi_ut_create_buffer_object(length); 307 if (!buffer_desc) { 308 return_ACPI_STATUS(AE_NO_MEMORY); 309 } 310 311 buffer = buffer_desc->buffer.pointer; 312 ACPI_MEMCPY(buffer, source_desc->buffer.pointer, length); 313 314 /* Lock entire transaction if requested */ 315 316 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 317 318 /* 319 * Perform the write (returns status and perhaps data in the 320 * same buffer) 321 */ 322 status = acpi_ex_access_region(obj_desc, 0, 323 (u64 *) buffer, function); 324 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 325 326 *result_desc = buffer_desc; 327 return_ACPI_STATUS(status); 328 } 329 330 /* Get a pointer to the data to be written */ 331 332 switch (source_desc->common.type) { 333 case ACPI_TYPE_INTEGER: 334 335 buffer = &source_desc->integer.value; 336 length = sizeof(source_desc->integer.value); 337 break; 338 339 case ACPI_TYPE_BUFFER: 340 341 buffer = source_desc->buffer.pointer; 342 length = source_desc->buffer.length; 343 break; 344 345 case ACPI_TYPE_STRING: 346 347 buffer = source_desc->string.pointer; 348 length = source_desc->string.length; 349 break; 350 351 default: 352 353 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 354 } 355 356 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 357 "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", 358 source_desc, 359 acpi_ut_get_type_name(source_desc->common.type), 360 source_desc->common.type, buffer, length)); 361 362 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 363 "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", 364 obj_desc, 365 acpi_ut_get_type_name(obj_desc->common.type), 366 obj_desc->common.type, 367 obj_desc->common_field.bit_length, 368 obj_desc->common_field.start_field_bit_offset, 369 obj_desc->common_field.base_byte_offset)); 370 371 /* Lock entire transaction if requested */ 372 373 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 374 375 /* Write to the field */ 376 377 status = acpi_ex_insert_into_field(obj_desc, buffer, length); 378 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 379 380 return_ACPI_STATUS(status); 381 } 382