1 /****************************************************************************** 2 * 3 * Module Name: exfield - ACPI AML (p-code) execution - field manipulation 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acdispat.h" 47 #include "acinterp.h" 48 #include "amlcode.h" 49 50 #define _COMPONENT ACPI_EXECUTER 51 ACPI_MODULE_NAME("exfield") 52 53 /* Local prototypes */ 54 static u32 55 acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length); 56 57 /******************************************************************************* 58 * 59 * FUNCTION: acpi_ex_get_serial_access_length 60 * 61 * PARAMETERS: accessor_type - The type of the protocol indicated by region 62 * field access attributes 63 * access_length - The access length of the region field 64 * 65 * RETURN: Decoded access length 66 * 67 * DESCRIPTION: This routine returns the length of the generic_serial_bus 68 * protocol bytes 69 * 70 ******************************************************************************/ 71 72 static u32 73 acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length) 74 { 75 u32 length; 76 77 switch (accessor_type) { 78 case AML_FIELD_ATTRIB_QUICK: 79 80 length = 0; 81 break; 82 83 case AML_FIELD_ATTRIB_SEND_RCV: 84 case AML_FIELD_ATTRIB_BYTE: 85 86 length = 1; 87 break; 88 89 case AML_FIELD_ATTRIB_WORD: 90 case AML_FIELD_ATTRIB_WORD_CALL: 91 92 length = 2; 93 break; 94 95 case AML_FIELD_ATTRIB_MULTIBYTE: 96 case AML_FIELD_ATTRIB_RAW_BYTES: 97 case AML_FIELD_ATTRIB_RAW_PROCESS: 98 99 length = access_length; 100 break; 101 102 case AML_FIELD_ATTRIB_BLOCK: 103 case AML_FIELD_ATTRIB_BLOCK_CALL: 104 default: 105 106 length = ACPI_GSBUS_BUFFER_SIZE - 2; 107 break; 108 } 109 110 return (length); 111 } 112 113 /******************************************************************************* 114 * 115 * FUNCTION: acpi_ex_read_data_from_field 116 * 117 * PARAMETERS: walk_state - Current execution state 118 * obj_desc - The named field 119 * ret_buffer_desc - Where the return data object is stored 120 * 121 * RETURN: Status 122 * 123 * DESCRIPTION: Read from a named field. Returns either an Integer or a 124 * Buffer, depending on the size of the field. 125 * 126 ******************************************************************************/ 127 128 acpi_status 129 acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, 130 union acpi_operand_object *obj_desc, 131 union acpi_operand_object **ret_buffer_desc) 132 { 133 acpi_status status; 134 union acpi_operand_object *buffer_desc; 135 acpi_size length; 136 void *buffer; 137 u32 function; 138 u16 accessor_type; 139 140 ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc); 141 142 /* Parameter validation */ 143 144 if (!obj_desc) { 145 return_ACPI_STATUS(AE_AML_NO_OPERAND); 146 } 147 if (!ret_buffer_desc) { 148 return_ACPI_STATUS(AE_BAD_PARAMETER); 149 } 150 151 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 152 /* 153 * If the buffer_field arguments have not been previously evaluated, 154 * evaluate them now and save the results. 155 */ 156 if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { 157 status = acpi_ds_get_buffer_field_arguments(obj_desc); 158 if (ACPI_FAILURE(status)) { 159 return_ACPI_STATUS(status); 160 } 161 } 162 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 163 (obj_desc->field.region_obj->region.space_id == 164 ACPI_ADR_SPACE_SMBUS 165 || obj_desc->field.region_obj->region.space_id == 166 ACPI_ADR_SPACE_GSBUS 167 || obj_desc->field.region_obj->region.space_id == 168 ACPI_ADR_SPACE_IPMI)) { 169 /* 170 * This is an SMBus, GSBus or IPMI read. We must create a buffer to 171 * hold the data and then directly access the region handler. 172 * 173 * Note: SMBus and GSBus protocol value is passed in upper 16-bits 174 * of Function 175 */ 176 if (obj_desc->field.region_obj->region.space_id == 177 ACPI_ADR_SPACE_SMBUS) { 178 length = ACPI_SMBUS_BUFFER_SIZE; 179 function = 180 ACPI_READ | (obj_desc->field.attribute << 16); 181 } else if (obj_desc->field.region_obj->region.space_id == 182 ACPI_ADR_SPACE_GSBUS) { 183 accessor_type = obj_desc->field.attribute; 184 length = 185 acpi_ex_get_serial_access_length(accessor_type, 186 obj_desc->field. 187 access_length); 188 189 /* 190 * Add additional 2 bytes for the generic_serial_bus data buffer: 191 * 192 * Status; (Byte 0 of the data buffer) 193 * Length; (Byte 1 of the data buffer) 194 * Data[x-1]: (Bytes 2-x of the arbitrary length data buffer) 195 */ 196 length += 2; 197 function = ACPI_READ | (accessor_type << 16); 198 } else { /* IPMI */ 199 200 length = ACPI_IPMI_BUFFER_SIZE; 201 function = ACPI_READ; 202 } 203 204 buffer_desc = acpi_ut_create_buffer_object(length); 205 if (!buffer_desc) { 206 return_ACPI_STATUS(AE_NO_MEMORY); 207 } 208 209 /* Lock entire transaction if requested */ 210 211 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 212 213 /* Call the region handler for the read */ 214 215 status = acpi_ex_access_region(obj_desc, 0, 216 ACPI_CAST_PTR(u64, 217 buffer_desc-> 218 buffer.pointer), 219 function); 220 221 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 222 goto exit; 223 } 224 225 /* 226 * Allocate a buffer for the contents of the field. 227 * 228 * If the field is larger than the current integer width, create 229 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows 230 * the use of arithmetic operators on the returned value if the 231 * field size is equal or smaller than an Integer. 232 * 233 * Note: Field.length is in bits. 234 */ 235 length = 236 (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length); 237 238 if (length > acpi_gbl_integer_byte_width) { 239 240 /* Field is too large for an Integer, create a Buffer instead */ 241 242 buffer_desc = acpi_ut_create_buffer_object(length); 243 if (!buffer_desc) { 244 return_ACPI_STATUS(AE_NO_MEMORY); 245 } 246 buffer = buffer_desc->buffer.pointer; 247 } else { 248 /* Field will fit within an Integer (normal case) */ 249 250 buffer_desc = acpi_ut_create_integer_object((u64) 0); 251 if (!buffer_desc) { 252 return_ACPI_STATUS(AE_NO_MEMORY); 253 } 254 255 length = acpi_gbl_integer_byte_width; 256 buffer = &buffer_desc->integer.value; 257 } 258 259 if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 260 (obj_desc->field.region_obj->region.space_id == 261 ACPI_ADR_SPACE_GPIO)) { 262 /* 263 * For GPIO (general_purpose_io), the Address will be the bit offset 264 * from the previous Connection() operator, making it effectively a 265 * pin number index. The bit_length is the length of the field, which 266 * is thus the number of pins. 267 */ 268 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 269 "GPIO FieldRead [FROM]: Pin %u Bits %u\n", 270 obj_desc->field.pin_number_index, 271 obj_desc->field.bit_length)); 272 273 /* Lock entire transaction if requested */ 274 275 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 276 277 /* Perform the write */ 278 279 status = 280 acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, 281 ACPI_READ); 282 283 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 284 if (ACPI_FAILURE(status)) { 285 acpi_ut_remove_reference(buffer_desc); 286 } else { 287 *ret_buffer_desc = buffer_desc; 288 } 289 return_ACPI_STATUS(status); 290 } 291 292 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 293 "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", 294 obj_desc, obj_desc->common.type, buffer, 295 (u32) length)); 296 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 297 "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", 298 obj_desc->common_field.bit_length, 299 obj_desc->common_field.start_field_bit_offset, 300 obj_desc->common_field.base_byte_offset)); 301 302 /* Lock entire transaction if requested */ 303 304 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 305 306 /* Read from the field */ 307 308 status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length); 309 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 310 311 exit: 312 if (ACPI_FAILURE(status)) { 313 acpi_ut_remove_reference(buffer_desc); 314 } else { 315 *ret_buffer_desc = buffer_desc; 316 } 317 318 return_ACPI_STATUS(status); 319 } 320 321 /******************************************************************************* 322 * 323 * FUNCTION: acpi_ex_write_data_to_field 324 * 325 * PARAMETERS: source_desc - Contains data to write 326 * obj_desc - The named field 327 * result_desc - Where the return value is returned, if any 328 * 329 * RETURN: Status 330 * 331 * DESCRIPTION: Write to a named field 332 * 333 ******************************************************************************/ 334 335 acpi_status 336 acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, 337 union acpi_operand_object *obj_desc, 338 union acpi_operand_object **result_desc) 339 { 340 acpi_status status; 341 u32 length; 342 void *buffer; 343 union acpi_operand_object *buffer_desc; 344 u32 function; 345 u16 accessor_type; 346 347 ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc); 348 349 /* Parameter validation */ 350 351 if (!source_desc || !obj_desc) { 352 return_ACPI_STATUS(AE_AML_NO_OPERAND); 353 } 354 355 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 356 /* 357 * If the buffer_field arguments have not been previously evaluated, 358 * evaluate them now and save the results. 359 */ 360 if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { 361 status = acpi_ds_get_buffer_field_arguments(obj_desc); 362 if (ACPI_FAILURE(status)) { 363 return_ACPI_STATUS(status); 364 } 365 } 366 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 367 (obj_desc->field.region_obj->region.space_id == 368 ACPI_ADR_SPACE_SMBUS 369 || obj_desc->field.region_obj->region.space_id == 370 ACPI_ADR_SPACE_GSBUS 371 || obj_desc->field.region_obj->region.space_id == 372 ACPI_ADR_SPACE_IPMI)) { 373 /* 374 * This is an SMBus, GSBus or IPMI write. We will bypass the entire 375 * field mechanism and handoff the buffer directly to the handler. 376 * For these address spaces, the buffer is bi-directional; on a 377 * write, return data is returned in the same buffer. 378 * 379 * Source must be a buffer of sufficient size: 380 * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or 381 * ACPI_IPMI_BUFFER_SIZE. 382 * 383 * Note: SMBus and GSBus protocol type is passed in upper 16-bits 384 * of Function 385 */ 386 if (source_desc->common.type != ACPI_TYPE_BUFFER) { 387 ACPI_ERROR((AE_INFO, 388 "SMBus/IPMI/GenericSerialBus write requires " 389 "Buffer, found type %s", 390 acpi_ut_get_object_type_name(source_desc))); 391 392 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 393 } 394 395 if (obj_desc->field.region_obj->region.space_id == 396 ACPI_ADR_SPACE_SMBUS) { 397 length = ACPI_SMBUS_BUFFER_SIZE; 398 function = 399 ACPI_WRITE | (obj_desc->field.attribute << 16); 400 } else if (obj_desc->field.region_obj->region.space_id == 401 ACPI_ADR_SPACE_GSBUS) { 402 accessor_type = obj_desc->field.attribute; 403 length = 404 acpi_ex_get_serial_access_length(accessor_type, 405 obj_desc->field. 406 access_length); 407 408 /* 409 * Add additional 2 bytes for the generic_serial_bus data buffer: 410 * 411 * Status; (Byte 0 of the data buffer) 412 * Length; (Byte 1 of the data buffer) 413 * Data[x-1]: (Bytes 2-x of the arbitrary length data buffer) 414 */ 415 length += 2; 416 function = ACPI_WRITE | (accessor_type << 16); 417 } else { /* IPMI */ 418 419 length = ACPI_IPMI_BUFFER_SIZE; 420 function = ACPI_WRITE; 421 } 422 423 if (source_desc->buffer.length < length) { 424 ACPI_ERROR((AE_INFO, 425 "SMBus/IPMI/GenericSerialBus write requires " 426 "Buffer of length %u, found length %u", 427 length, source_desc->buffer.length)); 428 429 return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); 430 } 431 432 /* Create the bi-directional buffer */ 433 434 buffer_desc = acpi_ut_create_buffer_object(length); 435 if (!buffer_desc) { 436 return_ACPI_STATUS(AE_NO_MEMORY); 437 } 438 439 buffer = buffer_desc->buffer.pointer; 440 memcpy(buffer, source_desc->buffer.pointer, length); 441 442 /* Lock entire transaction if requested */ 443 444 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 445 446 /* 447 * Perform the write (returns status and perhaps data in the 448 * same buffer) 449 */ 450 status = 451 acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, function); 452 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 453 454 *result_desc = buffer_desc; 455 return_ACPI_STATUS(status); 456 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 457 (obj_desc->field.region_obj->region.space_id == 458 ACPI_ADR_SPACE_GPIO)) { 459 /* 460 * For GPIO (general_purpose_io), we will bypass the entire field 461 * mechanism and handoff the bit address and bit width directly to 462 * the handler. The Address will be the bit offset 463 * from the previous Connection() operator, making it effectively a 464 * pin number index. The bit_length is the length of the field, which 465 * is thus the number of pins. 466 */ 467 if (source_desc->common.type != ACPI_TYPE_INTEGER) { 468 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 469 } 470 471 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 472 "GPIO FieldWrite [FROM]: (%s:%X), Val %.8X [TO]: Pin %u Bits %u\n", 473 acpi_ut_get_type_name(source_desc->common. 474 type), 475 source_desc->common.type, 476 (u32)source_desc->integer.value, 477 obj_desc->field.pin_number_index, 478 obj_desc->field.bit_length)); 479 480 buffer = &source_desc->integer.value; 481 482 /* Lock entire transaction if requested */ 483 484 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 485 486 /* Perform the write */ 487 488 status = 489 acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, 490 ACPI_WRITE); 491 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 492 return_ACPI_STATUS(status); 493 } 494 495 /* Get a pointer to the data to be written */ 496 497 switch (source_desc->common.type) { 498 case ACPI_TYPE_INTEGER: 499 500 buffer = &source_desc->integer.value; 501 length = sizeof(source_desc->integer.value); 502 break; 503 504 case ACPI_TYPE_BUFFER: 505 506 buffer = source_desc->buffer.pointer; 507 length = source_desc->buffer.length; 508 break; 509 510 case ACPI_TYPE_STRING: 511 512 buffer = source_desc->string.pointer; 513 length = source_desc->string.length; 514 break; 515 516 default: 517 518 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 519 } 520 521 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 522 "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", 523 source_desc, 524 acpi_ut_get_type_name(source_desc->common.type), 525 source_desc->common.type, buffer, length)); 526 527 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 528 "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", 529 obj_desc, 530 acpi_ut_get_type_name(obj_desc->common.type), 531 obj_desc->common.type, 532 obj_desc->common_field.bit_length, 533 obj_desc->common_field.start_field_bit_offset, 534 obj_desc->common_field.base_byte_offset)); 535 536 /* Lock entire transaction if requested */ 537 538 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 539 540 /* Write to the field */ 541 542 status = acpi_ex_insert_into_field(obj_desc, buffer, length); 543 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 544 545 return_ACPI_STATUS(status); 546 } 547