1 /****************************************************************************** 2 * 3 * Module Name: exfield - ACPI AML (p-code) execution - field manipulation 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2010, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acdispat.h" 47 #include "acinterp.h" 48 49 #define _COMPONENT ACPI_EXECUTER 50 ACPI_MODULE_NAME("exfield") 51 52 /******************************************************************************* 53 * 54 * FUNCTION: acpi_ex_read_data_from_field 55 * 56 * PARAMETERS: walk_state - Current execution state 57 * obj_desc - The named field 58 * ret_buffer_desc - Where the return data object is stored 59 * 60 * RETURN: Status 61 * 62 * DESCRIPTION: Read from a named field. Returns either an Integer or a 63 * Buffer, depending on the size of the field. 64 * 65 ******************************************************************************/ 66 acpi_status 67 acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, 68 union acpi_operand_object *obj_desc, 69 union acpi_operand_object **ret_buffer_desc) 70 { 71 acpi_status status; 72 union acpi_operand_object *buffer_desc; 73 acpi_size length; 74 void *buffer; 75 u32 function; 76 77 ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc); 78 79 /* Parameter validation */ 80 81 if (!obj_desc) { 82 return_ACPI_STATUS(AE_AML_NO_OPERAND); 83 } 84 if (!ret_buffer_desc) { 85 return_ACPI_STATUS(AE_BAD_PARAMETER); 86 } 87 88 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 89 /* 90 * If the buffer_field arguments have not been previously evaluated, 91 * evaluate them now and save the results. 92 */ 93 if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { 94 status = acpi_ds_get_buffer_field_arguments(obj_desc); 95 if (ACPI_FAILURE(status)) { 96 return_ACPI_STATUS(status); 97 } 98 } 99 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 100 (obj_desc->field.region_obj->region.space_id == 101 ACPI_ADR_SPACE_SMBUS 102 || obj_desc->field.region_obj->region.space_id == 103 ACPI_ADR_SPACE_IPMI)) { 104 /* 105 * This is an SMBus or IPMI read. We must create a buffer to hold 106 * the data and then directly access the region handler. 107 * 108 * Note: Smbus protocol value is passed in upper 16-bits of Function 109 */ 110 if (obj_desc->field.region_obj->region.space_id == 111 ACPI_ADR_SPACE_SMBUS) { 112 length = ACPI_SMBUS_BUFFER_SIZE; 113 function = 114 ACPI_READ | (obj_desc->field.attribute << 16); 115 } else { /* IPMI */ 116 117 length = ACPI_IPMI_BUFFER_SIZE; 118 function = ACPI_READ; 119 } 120 121 buffer_desc = acpi_ut_create_buffer_object(length); 122 if (!buffer_desc) { 123 return_ACPI_STATUS(AE_NO_MEMORY); 124 } 125 126 /* Lock entire transaction if requested */ 127 128 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 129 130 /* Call the region handler for the read */ 131 132 status = acpi_ex_access_region(obj_desc, 0, 133 ACPI_CAST_PTR(u64, 134 buffer_desc-> 135 buffer.pointer), 136 function); 137 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 138 goto exit; 139 } 140 141 /* 142 * Allocate a buffer for the contents of the field. 143 * 144 * If the field is larger than the current integer width, create 145 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows 146 * the use of arithmetic operators on the returned value if the 147 * field size is equal or smaller than an Integer. 148 * 149 * Note: Field.length is in bits. 150 */ 151 length = 152 (acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length); 153 if (length > acpi_gbl_integer_byte_width) { 154 155 /* Field is too large for an Integer, create a Buffer instead */ 156 157 buffer_desc = acpi_ut_create_buffer_object(length); 158 if (!buffer_desc) { 159 return_ACPI_STATUS(AE_NO_MEMORY); 160 } 161 buffer = buffer_desc->buffer.pointer; 162 } else { 163 /* Field will fit within an Integer (normal case) */ 164 165 buffer_desc = acpi_ut_create_integer_object((u64) 0); 166 if (!buffer_desc) { 167 return_ACPI_STATUS(AE_NO_MEMORY); 168 } 169 170 length = acpi_gbl_integer_byte_width; 171 buffer = &buffer_desc->integer.value; 172 } 173 174 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 175 "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", 176 obj_desc, obj_desc->common.type, buffer, 177 (u32) length)); 178 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 179 "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", 180 obj_desc->common_field.bit_length, 181 obj_desc->common_field.start_field_bit_offset, 182 obj_desc->common_field.base_byte_offset)); 183 184 /* Lock entire transaction if requested */ 185 186 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 187 188 /* Read from the field */ 189 190 status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length); 191 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 192 193 exit: 194 if (ACPI_FAILURE(status)) { 195 acpi_ut_remove_reference(buffer_desc); 196 } else { 197 *ret_buffer_desc = buffer_desc; 198 } 199 200 return_ACPI_STATUS(status); 201 } 202 203 /******************************************************************************* 204 * 205 * FUNCTION: acpi_ex_write_data_to_field 206 * 207 * PARAMETERS: source_desc - Contains data to write 208 * obj_desc - The named field 209 * result_desc - Where the return value is returned, if any 210 * 211 * RETURN: Status 212 * 213 * DESCRIPTION: Write to a named field 214 * 215 ******************************************************************************/ 216 217 acpi_status 218 acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, 219 union acpi_operand_object *obj_desc, 220 union acpi_operand_object **result_desc) 221 { 222 acpi_status status; 223 u32 length; 224 void *buffer; 225 union acpi_operand_object *buffer_desc; 226 u32 function; 227 228 ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc); 229 230 /* Parameter validation */ 231 232 if (!source_desc || !obj_desc) { 233 return_ACPI_STATUS(AE_AML_NO_OPERAND); 234 } 235 236 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 237 /* 238 * If the buffer_field arguments have not been previously evaluated, 239 * evaluate them now and save the results. 240 */ 241 if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { 242 status = acpi_ds_get_buffer_field_arguments(obj_desc); 243 if (ACPI_FAILURE(status)) { 244 return_ACPI_STATUS(status); 245 } 246 } 247 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 248 (obj_desc->field.region_obj->region.space_id == 249 ACPI_ADR_SPACE_SMBUS 250 || obj_desc->field.region_obj->region.space_id == 251 ACPI_ADR_SPACE_IPMI)) { 252 /* 253 * This is an SMBus or IPMI write. We will bypass the entire field 254 * mechanism and handoff the buffer directly to the handler. For 255 * these address spaces, the buffer is bi-directional; on a write, 256 * return data is returned in the same buffer. 257 * 258 * Source must be a buffer of sufficient size: 259 * ACPI_SMBUS_BUFFER_SIZE or ACPI_IPMI_BUFFER_SIZE. 260 * 261 * Note: SMBus protocol type is passed in upper 16-bits of Function 262 */ 263 if (source_desc->common.type != ACPI_TYPE_BUFFER) { 264 ACPI_ERROR((AE_INFO, 265 "SMBus or IPMI write requires Buffer, found type %s", 266 acpi_ut_get_object_type_name(source_desc))); 267 268 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 269 } 270 271 if (obj_desc->field.region_obj->region.space_id == 272 ACPI_ADR_SPACE_SMBUS) { 273 length = ACPI_SMBUS_BUFFER_SIZE; 274 function = 275 ACPI_WRITE | (obj_desc->field.attribute << 16); 276 } else { /* IPMI */ 277 278 length = ACPI_IPMI_BUFFER_SIZE; 279 function = ACPI_WRITE; 280 } 281 282 if (source_desc->buffer.length < length) { 283 ACPI_ERROR((AE_INFO, 284 "SMBus or IPMI write requires Buffer of length %u, found length %u", 285 length, source_desc->buffer.length)); 286 287 return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); 288 } 289 290 /* Create the bi-directional buffer */ 291 292 buffer_desc = acpi_ut_create_buffer_object(length); 293 if (!buffer_desc) { 294 return_ACPI_STATUS(AE_NO_MEMORY); 295 } 296 297 buffer = buffer_desc->buffer.pointer; 298 ACPI_MEMCPY(buffer, source_desc->buffer.pointer, length); 299 300 /* Lock entire transaction if requested */ 301 302 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 303 304 /* 305 * Perform the write (returns status and perhaps data in the 306 * same buffer) 307 */ 308 status = acpi_ex_access_region(obj_desc, 0, 309 (u64 *) buffer, function); 310 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 311 312 *result_desc = buffer_desc; 313 return_ACPI_STATUS(status); 314 } 315 316 /* Get a pointer to the data to be written */ 317 318 switch (source_desc->common.type) { 319 case ACPI_TYPE_INTEGER: 320 buffer = &source_desc->integer.value; 321 length = sizeof(source_desc->integer.value); 322 break; 323 324 case ACPI_TYPE_BUFFER: 325 buffer = source_desc->buffer.pointer; 326 length = source_desc->buffer.length; 327 break; 328 329 case ACPI_TYPE_STRING: 330 buffer = source_desc->string.pointer; 331 length = source_desc->string.length; 332 break; 333 334 default: 335 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 336 } 337 338 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 339 "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", 340 source_desc, 341 acpi_ut_get_type_name(source_desc->common.type), 342 source_desc->common.type, buffer, length)); 343 344 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 345 "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", 346 obj_desc, 347 acpi_ut_get_type_name(obj_desc->common.type), 348 obj_desc->common.type, 349 obj_desc->common_field.bit_length, 350 obj_desc->common_field.start_field_bit_offset, 351 obj_desc->common_field.base_byte_offset)); 352 353 /* Lock entire transaction if requested */ 354 355 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 356 357 /* Write to the field */ 358 359 status = acpi_ex_insert_into_field(obj_desc, buffer, length); 360 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 361 362 return_ACPI_STATUS(status); 363 } 364